Mac pro running slow, rainbow all the time, can't repair disk
So about a week ago my mac pro was running fine as i worked for a few hrs. then all the sudden i was clicking through firefox and i got a rainbow, it lasted ten minutes and i couldn't close the program, when i tried to click anything else it froze as well. I restarted, it went to grey screen froze, restarted itself, the booted as normal and ran fine. Then all the sudden it did again later the next night while working in photoshop. I went through my programs, deleted firefox and msn msgr as culprits, worked ok, then did it again while in safari. I closed everything rebooted, ran ONLY safari and it got the rainbow again. I went and verified my permissions, had some issues repaired them. Same rainbows. I went and tried to verify disk and i got issues with incorrect block count. "volume bit map needs minor repair" "volume header needs minor repair" I rebooted in target disk mode, used my macbook pro to run disk utility and try to repair. Got the same "error: filesystem verify or repair failed." i'm really out of ideas at this point asides reformatting and hoping for the best. Anyone have another solution?
Jonny, Balto's response wasn't particularly helpful. Yes, we know the SBBOD means the processor is busy.
My MBP is doing some of the same things as yours. And unfortunately, the problem seems to be getting worse. I've noticed that when TM starts its backup it just locks up everything. Disk Utility and Disk Warrior are no help.
I'm onto wiping the HD and doing a clean install and see if that fixes things. Best of luck to you and hope someone gets back to you on a possible solution.
Similar Messages
-
Macbook Pro is slow, freezing all the time and has Wi-Fi problems
Hello!
My Macbook Pro started acting kinda strange a couple of weeks ago. It's slow, freezing all the time and constantly connecting and reconnecting to the Wi-Fi network after around half a minute of usage.
Here is the story, as far as I know:
In the start of 2014, pup-up boxes started popping up on my Macbook Pro. They said that I had to enter a password for the Keychain to gain access to a service or something. The odd thing about it was that I had never set up my iCloud Keychain. It just started appearing without me knowing why. Unfortunately, I didn't know the password for this due to the fact that I never set it up. I tried every password combination that could possibly work, but I didn't get through it. I tried different solutions, but nothing worked out. I solved it by simply making a new user account on my Mac. I used this for like 1 month before the whole Mac with all its user started messing itself up.
It might be worth to notice that this secondary-user didn't require a password to log in, so when I closed my Macbook and re-opened it, it would continue where it was left off. This might have been the reason for the Mac sometimes to get really warm while being in my backpack, which might also have caused the problem. I am not sure though.
After using the secondary user for a while, the Mac started acting strange again. This time it was something different. One day, my girlfriend started up my Macbook Pro and noticed that it was extremely slow. I assumed it was just in the need of a restart, but that wasn't it. The computer started freezing all the time at first. It froze when I clicked something in an application, and I had to wait like 10 seconds for it to go back to normal. If I was typing anything on Facebook, it would freeze, but I could still use any other tab of the browser without any problems. However, they would freeze to if I did anything special on other websites. Every other program would also freeze for reasons like typing or clicking on anything.
After a short while, it started being really slow during startup and use. A few days ago, my Macbook Pro also started disconnecting from Wi-Fi networks while trying to load pages. It doesn't disconnect every time, but it does sometimes. It tries to reconnect after that, and if it succeed's, everything is back to normal for a while.
Additionaly, the battery have been draining faster, and when it reached 0%, the computer turned off and closed all the open programs. Normally it has entered Sleep Mode, but not anymore.
Do any of you have any clue what the issue might be?
I have done the following:
- Reset PRAM
- Restore to system defaults
- Installed AVG Antivirus and scanned it
- Repaired and verified disk in Disk Utility.
- Uninstalled Adobe Flash Player.
I hope anyone can help me! I really need my computer for educational use!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/U.+\/Shared\//b'$'\n''s/(\/Users\/)[^/]+/\1USER/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mac osx, really slow, beachball all the time
Hi helpful people....
My imac, 6 years old but lovely, is soooo slow. Don't know if it needs more RAM or I can sort it some other way??
Any help very welcome!
roxannefromgbrSee:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs,
Macintosh OS X Routine Maintenance,
Mac troubleshooting: What to do when your computer is too slow,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
Problem description:
I upgraded to Yosemite recently. Now my computer acts like it has a virus although my virus checker says it is clean. It is slow, freezes all the time, I have to turn off my computer to get it to work again. I don’t like the new Yosemite.
EtreCheck version: 2.0.7 (93)
Report generated October 30, 2014 at 3:57:56 AM CDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:26:55
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (434.65 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.trendmicro.itis.dca.plist Support
[running] com.trendmicro.itis.uimgmt.agent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trendmicro.icore.av.plist Support
[running] com.trendmicro.icore.main.plist Support
[running] com.trendmicro.icore.wp.plist Support
[running] com.trendmicro.itis.plugin.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.cloud-player.plist Support
[failed] com.facebook.videochat.[redacted].plist Support
[loaded] com.trendmicro.itis.uninstaller.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
Flux Application (/Applications/Flux.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Trend Micro Titanium Application (/Applications/TrendMicro.localized/iTIS.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Genieo Application (/Incompatible Software/Genieo.app)
KiesViaWiFiAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
KiesAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
Safari Extensions: ℹ️
Omnibar (Disabled)
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
14% WindowServer
5% Safari
4% Dropbox
2% hidd
1% lsregister
Top Processes by Memory: ℹ️
172 MB Safari
142 MB softwareupdated
90 MB rapportd
66 MB Dropbox
64 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
33 MB Free RAM
1.40 GB Active RAM
1.38 GB Inactive RAM
1.08 GB Wired RAM
4.82 GB Page-ins
237 MB Page-outsThank you all for the help. My mac still freezes. I've deleted what you suggested. I hope it did it right. Can you check and help me out?
Also I went through the list and saw this
MATSHITADVD-R UJ-8A8
Could this be the reason why my CD/DVD player quit working because it's crap?
thanks
Problem description:
My macbook pro still freezes at times and i have to power it off and on again after downloading Yosemite. This never happened prior. This is my second time running etresoft. I deleted the mackeeper as suggested. What else is going on?
EtreCheck version: 2.0.11 (98)
Report generated November 4, 2014 at 10:26:26 AM CST
Hardware Information: ℹ️
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2 days 18:23:38
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (433.64 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/SmartSwitch.app
[not loaded] com.devguru.driver.SamsungACMControl (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.12 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.12 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.12 - SDK 10.6) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.rcd.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.warmd_agent.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.trendmicro.itis.dca.plist Support
[running] com.trendmicro.itis.uimgmt.agent.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.trendmicro.icore.av.plist Support
[running] com.trendmicro.icore.main.plist Support
[running] com.trendmicro.icore.wp.plist Support
[running] com.trendmicro.itis.plugin.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.cloud-player.plist Support
[failed] com.facebook.videochat.[redacted].plist Support
[loaded] com.trendmicro.itis.uninstaller.plist Support
User Login Items: ℹ️
Flux Application (/Applications/Flux.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Trend Micro Titanium Application (/Applications/TrendMicro.localized/iTIS.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
KiesAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
KiesViaWiFiAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Trusteer Endpoint Protection Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
9% Safari
6% WindowServer
5% com.apple.WebKit.Plugin.64
4% hidd
0% authd
Top Processes by Memory: ℹ️
172 MB Safari
146 MB com.apple.WebKit.Plugin.64
56 MB WindowServer
52 MB iTunes
47 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
64 MB Free RAM
1.13 GB Active RAM
1.07 GB Inactive RAM
1.10 GB Wired RAM
23.40 GB Page-ins
1.55 GB Page-outs -
i have install new hard drive 500gb and i still have 400gb available but my macbook run very slow getting rainbow all the time on screen.
need helpFirst boot into recovery and select Disk Utility>First Aid and repair the disk.
If there is no improvement, perform a Safe Boot:
http://support.apple.com/kb/ht1
If there is an improvement, then third party applications are probably the cause of the problem.
Ciao. -
I have a Mac Pro Running OSX Leopard that the OS has gotten corrupted.
I have a Mac Pro Running OSX Leopard that the OS has gotten corrupted. Can I boot and install OSX Snow Leopard instead of reinstalling OSX Leopard?
Buy a new drive.
Leave your corrupt Leo system as is.
Maybe you own Disk Warrior? maybe not.
If you don't own Carbon Copy Cloner, invest in it. It can verify and do checksum on all files. So too can Lloyd's File Integrity app.
But you are overdue probably for a new system drive. My vote today is pick up a 120GB Samsung 840 SSD for $90 is fine, will feel like a new computer and is room enough for system and apps. All your data needs to go to drive #2.
With a clone you should never have to reinstall. But you would have bootable backups from points in time, like right after installing, right before making changes.
If you are running Leo then it has to be Early 2008 or before, a 3,1 or maybe 1,1 or 2,1 model.
Leo is not receiving security updates. Snow is, but Lion is even more secure and runs on all Mac Pro models. It does drop support for all the older PowerPC programs and drivers.
You should insure that you are prepared for any updates needed even for 10.6.8.
http://www.roaringapps.com -
HT1338 mac pro runs slow since I installed mountain lion
mac pro runs slow since i installed mountain lion
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Otherwise, take the steps below when you notice the slowdown.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
HP xw8600 workstation fans run at max all the time after upgrading CPUs and memory
Hello, This is my 1st post on the forums here so I would like to thank everyone for the help ahead of time. I have an HP xw8600 workstation on which I have upgraded the CPUs and RAM recently - after the upgrade the fans seem to spin at full speed all the time (not just under load). Before the upgrading the fans were barely heard but afterwords the workstation has become very loud. This seems odd that the fans always run fast now and seems like this is not "normal" - what needs to be done to allow the fans to again be modulated by load/temp settings as designed? I looked in the temp and fan RPM settings in the BIOS and it looks like all sensors are working (including ambient temp sensor - was stating around 20 deg. C). Hardware changes:Before - CPU: 2x Intel Xeon X5460/ 3.16 GHz, 12MB L2, 1333 MHz, FSB,120WRAM: HP 32GB (16x2GB) DDR2-667 ECC FBD RAM - using RAM riser After -CPU: 2x Intel Xeon X5492/ 3.40 GHz, 12MB L2, 1600 MHz, FSB,150WRAM: HP 32GB (8x4GB) DDR2-800 ECC FBD RAM - using RAM riser NOTE: From the HP spec sheet it says that 32GB(8x4GB) is not supported by 5492... I am not sure why this is so and do not know if this has anything to do with my fans running very fast. HP 32GB(8x4GB)DDR2-800 ECC FBD RAM RISER Supported ONLY w/dual processors
5272, 5472, 5482 HP 64GB (16x4GB) DDR2-800 ECC FBD RAM Supported ONLY w/dual processors
5272, 5472, 5482 and 5492.
Acoustics waiver required. Other than the constantly loud fans the workstation works perfectly with the new setup. Please let me know if anyone has run into this issue with the fast fans and whether there is a fix for this (maybe flashing BIOS?). Any advice is greatly appreciated! [I originally posted this under Desktops section - http://h30434.www3.hp.com/t5/Desktop-Hardware/HP-xw8600-workstation-fans-run-at-max-all-the-time-after/td-p/3929746]The xw8600 has a motherboard firmware setting that if it detects high powered processors in place it wants to see the "double tall" performance heatsink/double fans per heatsink in place. I have posted about that and how I rewired a double tall to use side by side in my xw8400 next to a single tall heatsink/fan to see how cooling was affected in that workstation. The xw8400 did not ever come with double tall performance heatsinks, to my knowledge, so its motherboard's firmware is different. In those posts I also explained how to do a simple jumper wire modification on a single tall heatsink to spoof the xw8600 into thinking it had a double tall/two fans in place over each processor. Simple and quick. So, you might want to get a couple of double talls off eBay, or try the jumper wire trick. I'd personally advise to get the double tall heatsinks given that you're running 150W max TDP processors. If I remember correctly HP wanted you to use the double talls for 120W max TDP and above. I'd feel comfortable using that trick on a set of 120 watt processors if I was not hammering them frequently, but it sounds like you're a high level power user. The all-fans-on-high can be due to a failed thermisitor in the front power cable reading ambient air temps too high, but you can check that in BIOS to see the temp and it sounds like yours is not elevated incorrectly. You can search for my experience with that in a xw6600, and it is an easy $8.00-$12.00 fix with a new cable off eBay. You'd want the longer version for the xw8600, versus the shorter one for the xw6600. Finally, maybe you've just gone too high in your total wattage use? Those risers can run hot and draw lots of power. Could you live with less ram and get rid of the risers using 4GB sticks? Sometimes those prior prohibitions regarding what is and is not supported go away with later BIOS updates. Is your BIOS the latest? Welcome, and let us know what turns out to be the problem so others can benefit too. Scott
-
Extreme slow voice all the time +Virtual Keyboard problem
Hi,
Just I purchased 15 day ago, I am facing below problem since I bought, please help.
Extreme slow voice all the time ex. during the call, music listen, FM listen time, even I have set HIGH volume using right top button.
Virtual Keyboard don’t change to vertical, even I have set the Auto Rotation on.
Why it takes 9 hrs to charge full?
Thanks in advance.Hi,
Just I purchased 15 day ago, I am facing below problem since I bought, please help.
Extreme slow voice all the time ex. during the call, music listen, FM listen time, even I have set HIGH volume using right top button.
Virtual Keyboard don’t change to vertical, even I have set the Auto Rotation on.
Why it takes 9 hrs to charge full?
Thanks in advance. -
I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?
The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check. -
Hello find my mac displays offline when I'm using the actual mac I want to find at the time, can anyone help?, Hello find my mac displays offline when I'm using the actual mac I want to find at the time, can anyone help?
Welcome to the Apple community.
Is your Mac connected to the network via ethernet. Mac's thatareI connected via ethernet cannot be located using "find my phone". -
Can I leave my mac book air plugged in all the time at work, without damaging the battery?
I know people may have asked this questions many times, however I intend on using my mac book air at work and would like know I I can leave it on powered on in the office and the unplugged at night?. Would it damage my MacBook?
Yes. It will not damage the battery. You do not need to unplug it at night. If you use it from the AC charage all the time, then about once every two months you should use it on battery power until the battery drops below 20%. Then fully recharge the battery after which you should allow the battery to "rest" for about one hour. It is OK to use the computer during that time but do not yet connect the AC adaptor. Follow this practice and your battery should have a good life.
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University
Apple - Batteries - iPod
Apple - Batteries - iPhone
Apple - Batteries - iPad
Apple Portables- Calibrating your computer's battery for best performance
Mac notebooks- Determining battery cycle count
How to Calibrate Your Mac, iPhone, or iPad Battery | MacBlend -
Hi my Mac keeps highlighting different action boxes (on its own) all the time a strange text box has appeared on the screen that informs you if you press a key or click on a item. if the sound is turned up you are informed when a item is highlighted or a you click on a item HELP!
Hi Thanks for your help fixed the problem
Kind Regards
Nannedee -
Why don't my Mac connect to my WiFi all the time
I have a 2 month old Mac and I love it when it connects to my WiFi. I have the pass words and all programed in and it dont want to connect when I fire it up all the time. HELP please!!
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Still Having Lion Wi-Fi Problems? This Solution Works
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/ -
My cursor spins like a disk all the time, wont read any disks either, any ideas?
My cursor spins all the time, any ideas?
Boot from your install disc, run Disk Utility. The startup disk may need repairing.
Using Disk Utility to verify or repair disks
Maybe you are looking for
-
Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????
-
Regarding building source objects
Hi all, I have an antique(.so) library. I have done an ldd on the .so file and it is able to give all the depenndent .so files in /usr/lib directory. I want to build this .so file freshly. can I rebuild the antique (.so) freshly from these /usr/lib l
-
Hi, In the case where I don't know how many buttons I'll need until runtime how can I dynamically generate button names? It would be something like this, in a shell script: i = 0 n = <generated at runtime> while (( i<n )) do JButton b_$i = new JB
-
I forgot my apple security question and my back up email how do i fix it?
I dont know how to update the iPhone 3g. How do i update it to IOS 7? And i forgot my backup email and my security qustiond to my apple ID. How do i fix it?
-
I have been working on this website: http://www.rmns.org. I am building it on my mac and I use Firefox as my web browser. I finally got it to work on my mac in Firefox, Safari and on the PC with IE 6 and IE 7. Then I nonchalantly I checked it out usi