Mac Pro SSD drive and libraries

I just got a base level mac pro. When I run compressor, it fills up the library in the ssd drive and crashes the machine when it runs out of disk space. Is there a solution for this?
Thanks
Russ

It happens with every job I tested. I use Compressor in a three mac cluster. Compressor uses" /library/Application Support/Compressor/Storage " on the local hard drive to cache the videos you are compressing. This limits the output file size to size of the main ssd drive. I only let it crash ones, because I had to go in and manually delete the cache files and free up my drive. I got worried it might shut down enough of the operating system when I could not clean the files out and lock my machine up due to no disk space.
The Mac Pro is a new system for me and I am trying to understand the limitations. I like the external drive concept, but my local ssd hard drive now become like memory, and "memory leaks" on a hard drive operating system are difficult to trace.

Similar Messages

I'd like to carry my system, applications and files on a portable Thunderbolt ssd drive and boot from it. I have a Mac Pro in the office, iMac at home

I'd like to carry my system, applications and files on a portable Thunderbolt ssd drive and boot from it. I have a Mac Pro in the office, iMac at home, a MacBook Air for when I'm on the road, all with TB. Can a single external TB drive boot all three hardware configurations successfully? I've been told that differences in hardware configurations between the systems make this impossible. Is this correct?

Piece or peace of cake really though.
A quick install on new hard drive or SSD or 10K and less than an hour to move everything over properly.
YOU looked for a quick fix and found none and all the brick walls.
It is not days of work to do a clean install and migrate.
There are few if any apps that need to be freshly installed either though there are updates needed for them to be compliant, any driver or plugin also and that is done ahead of time with research.
And your backup or clone of your system is taken care of - you leave the old system boot drive 'as is' untouched.
Also, better strategy to move most all your home folder (except for its own ~/Library) to ANOTHER disk drive and not on t he system drive at all.
As for applications on its own drive or 3rd party, beeen there done that, even SSD or 15K SCSI - no benefit in performance or organization.

Why my Mac Pro hard drive noise and too slow?

Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
http://scsc-online.com
They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
I could probably think up 20 or 30 more if needed.

Mac Pro RAID Card and Western Digital drives

I'm having huge troubles with these items.
I first installed four WD7500AYYS (Raid Edition) to build a RAID 5 and install Leopard on it. At this point, one of the drives was probably DOA and didn't show up in the bay. I then reinstalled the Seagate that shipped with the machine, then proceeded to create another enhanced JBOD raid with one of the WD drives. After a couple of seconds, RAID utility reported an error (disk about to fail and such). I then tried with another one. The process ended with a kernel panic after two hours, while RAID utility was still marking the drive for enhanced JBOD. That disk never show up again, in any bay.
At this point, I'm left with two WD drives. I can't get past the creation of a RAID set with them, no matter what. Either RAID utility reports an error, or it says the disk has been ejected, or it keeps create the RAID for hours... The later usually ends with a "force quit", or a force shutdown. During these attemps, the RAID card went missing once, then it appeared again on the following reboot. The RAID battery, which was fully charged at first, is now being "repaired" (charging ?).
I then ran AHT to see whether there was something wrong. No errors reported.
Because all four drives were Raid Edition, I thought this could be the root of the problems. So I bought a Caviar SE16 (WD5000AAKS). To no avail. It fails too, in the very same way. And now it no longer appears in any bay.
The last step I took was to remove the RAID card (connecting the iPass connector to the motherboard). Out of the five WD drives, only two RE2 (the two that still show up with the RAID card) do appear in disk utility. But disk utility never ends "writing the partition map" or "preparing for initialization".
By now, I end up with five WD drives that appear to be just dead, as if they were killed by the RAID card trying to RAID them. The only drive that works, with or without the RAID card, in any bay, is the Seagate. I didn't try to fiddle with it though (I'm reluctant to format it just to see whether I can create an enhanced JBOD raid with it).
So the question is, are Western Digital drives compatible with this RAID card ? If they do, then how a RAID card can kill them in such a way while keeping the Seagate alive ?
I'm lost in conjectures. I don't even know if/how I can bring all the WD drives back to life. I'm not sure the RAID card is faulty, I've already lost a lot of time and money, I'm not willing to buy yet another drive to see it fail too, and my Mac Pro is kind of useless as I don't want to spend time on installing/configuring everything I need on a drive that is bound to be replaced by a larger RAID 5 array.
Any help is appreciated. Thank you.

Someone yesterday or Friday, had a system with 4 x 1TB drives and Pro RAID, but in their case, it was determined later Saturday that drive bay #1 was not functioning.
Hopefully these fully retail drives, not OEMs, and I would think they are fine. They are what I would use (Sonnet Tempo only supports RE of the WD drives). Someone else, Danish?, had 3 out of 4 WD drives were DOA.
I've never had trouble buying over a dozen from OWC, so it does seem odd.
If you have SoftRAID 3.6.6 I would use that to zero the first and last 100 sectors, or you can begin to zero the whole drive and cancel at any time, just to check the health of the drive and that it can zero and not produce I/O errors.
There are two other methods for accessing and managing Mac Pro RAID, ARD and CLI
http://docs.info.apple.com/article.html?artnum=306231
Originally, only Apple drives were supported. My understanding was that this changed. But the only article I found in KB dates back to Aug '07:
Question: What drives does Apple support with the Mac Pro RAID Card and the Xserve RAID Card?
Answer: +Only Apple drives are supported with the Mac Pro RAID Card and the Xserve RAID Card.+
My understanding that 3rd party retail drives such as WD RE2 750GB, Seagate, Hitachi were supported as well since the article was written - and I can't find where I read that, but sure that I did, as this was discussed in the past.
I'd like to find an official article. Even my friend Google was helpless

Mac Pro Hard Drive Connectors

I need to replace the two screws that hold the hard drive connectors to the Mac Pro.
Does anyone know where I can begin to find these? They are two small black screws.
The previous owner of my Mac Pro removed them so that he could attach an SSD drive loosely to the Mac Pro.
I'm going to replace the SSD drive, as it failed, and it comes with a 3.5" tray that should attach to the Mac Pro hard drive carrier, but when I push it back in to align up with the hard drive connector, since he removed the screws, it doesn't align up and go in without me manually connecting it. I'd like to get it back to the way it was with the screws.
So...I wonder what part number that is or how I can get those two little screws, the exact ones?
Any advice would be great.
Thanks.

ChrisMc73 wrote:
Yeah there are two models for this Icy Dock SSD Kit...I think I want the screwless version.
MB882SP-1S-2B - uses screws to mount the drive and has more ventilation for a moving parts 2.5" drive
MB882SP-1S-1B - is screwless and is meant more for SSD drives
I use the screwless version.
As for dvwearhouse and others, unless you know the part number, how do you know where to look?

The new Mac Pro (6,1) and TRIM

With its economical internal design and limited internal expansion options, the new Mac Pro depends heavily on the speed and flexibility of Thunderbolt 2 for expansion. In the old days, we could add four HDs in the internal bays and one more under the optical drive. This also allowed us, if we used SSDs instead of HDs, to enable TRIM for other than Apple drives.
We know that TRIM doesn't work with a USB 3.0 connection. The question is, can TRIM be enabled on an SSD connected in some fashion through Thunderbolt? I know that graphics cards can be plugged into an external PCIe expansion chassis and that eSATA SSDs, such as the OWC Mercury Accelsior_E2, can plug in too. But does having to pass through the Thunderbolt interface interfer with or prevent TRIM support? For that matter, what kind of external connection to an SSD at the other end of the Thunderbolt cable would be able to support TRIM? I'm currently using a CalDigit PCIe card which provides two eSATA external connections, and when a NewerTech Voyager Q is connected and an SSD plugged into it (like putting bread in a toaster), the drive is seen as "Rotational" in System Information, and TRIM cannot be enabled.
Since TRIM support is important for continued performance and longer life of SSDs, is this an issue with the new Mac Pro's design philosophy?

Hopeful but not comforting.
With Mavericks, not all SSDs will report TRIM support, but doing a benchmark both before and after the change should confirm that TRIM is functional.
I should see TRIM = YES and not from some benchmark.
Thunderbolt support for TRIM is good. But Intel has as yet? never supported TRIM on an array, so not sure how that is accomplished.
"Is" or "may" and "could" - I just wouldn't make a "TRIM is supported by 10.8.5 and later" as it may vary by Macs that had native SATA III with PCIe support, the new Samsung controller Apple has been using. Certainly not in 5,1 Mac Pro except if and only for an Apple SSD BTO upgrade.

Mac Pro DVD Drive Weirdness

Here's my problem:
I have a Mac Pro (Dual-Core), and the DVD drive is becoming increasingly flaky. Any DVD Video I burn from the internal drive from DVD Studio Pro projects to client MP4 files (I use either Toast Titanium 8 or 10) will play on any other computer (Windows or Mac) and even on cheap set-top DVD players, but won't play back on my drive. Mass-produced DVD, CD, and even CD-R media work fine. I've been using DVD+R media for about 3 years with no issues before now.
I've cleaned the lens with a Q-tip and 99% isopropyl alcohol, I've reset all the connections, tried different media (including Taiyo Yuden) and different burn speeds, and all I get is either "blank disc" or "Unreadable Disc" dialogs when I insert the disc after burning. Did I mention that this is pretty embarassing in front of clients?
So, before I use my drive for target practice, I'd like to know if anyone can recommend any kind of process that might be causing this (repairing permissions, trashing prefs, etc.). If the drive is end-of-life, fine--I just want to know one way or the other.
As usual, thanks in advance for any and all helpful info...
<Edited by Host>

Cleaner discs are so cheap, it is definitely worth a shot.
If no joy, look at OWC/macsales for a reasonably priced IDE/ATA drive that works in your Mac.

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD display

after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

I have a Mac Pro 1.1 and want to put one or two large screens HD displays on it. What might I need to up grade and which HD TV or displays or the best for the money?

I have a Mac Pro 1.1 and want to add one or two HD displays or HDTVs to my computer. I do a lot of work with Photoshop and need a larger work area.
What do I need to up grade my computer? Which displays and or HDTV's might be the most cost effective to get?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

Where can I find Mac Pro Hard Drive Holder?

Where can I find Mac Pro Hard Drive Holder? Only 4 came withe the computer and I need some more.
Anybody knows where I could buy some?
Thanks

http://www.transintl.com/store/category.cfm?Category=2705

The manufacturer that creates the Mac Pro hard drive enclosure

I want to purchase another hard drive enclosure and I know there are a few companies that manufacture drives resembling the Mac Pro. Rosewell and Coolgear...but which one does the massive storage version with 5 drives on RAID with option of firewire 800 or SATA output? Its almost half the size of the Mac Pro.
I've been googling this one for awhile and I remember seeing it somewhere.

Hi Erik,
Here they are from Gtech called Gspeed:
http://www.g-technology.com/Products/G-SPEED.cfm
I saw one at buffalo sites, it comes with 4 drive enclosure.
But it doesn't look like macpro shape at all.
http://www.buffalotech.com/products/external-drives/drivestation/
Good Luck

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue

Hello!
Is there FIX / Workaround to Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue ? ( +w/ ATI Radeon HD 2600 XT display adapter+ ). Its really annoying problem :-/.
Main problem is when i start my Mac, my 30" HP screen dosen't wake up, it always on suspend mode. Sometimes it wakes up on the 3rd try orso, sometimes it ruins my motivation, ideas and i give up (talk about inspiration killer). If i connect PC Laptop to that screen, sreen wakes up straight away. ATI says display adapters "drivers" are included on the OSX install. Great. Weird thing is i didn't recognize this problem at all 6-8 months ago, so i thought my system is fine. So i can't return my HP screen anymore.
My choices are to buy another 30" screen or buy different display adapter; there's two choices atm i think;
*-ATI Radeon HD 3870 512MB PCI-E for Mac Pro (~200€)*
*-EVGA GeForce GTX 285 Mac Edition 1GB (~500€)* (this one has seperate OSX drivers).
_Can anyone confirm if those display adapters work with HP 3065 30" screen ?._
http://forums.macrumors.com/showthread.php?t=687624
http://discussions.apple.com/message.jspa?messageID=9388978
http://discussions.apple.com/thread.jspa?threadID=1794155&tstart=60
Br,
Petri

Thanks for all information. I haven't been Mac user very long . I just want to get rid of my annoying problem. I'll do music composing mainly on my Mac Pro. So, it dosen't really matter what display card i'm using, i want to just make sure it works with HP 3065 .

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

HT1553 i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

i am upgrading my 2008 macbook to an ssd drive and want to save my settings. how do i save then? I have my files backed up with time machine ,but dont want to restore all files ,as there might be some junk backed up too. Help will be appretiated

When you restore from a Time Machine back up you can pick and chose what is restored. It is not an all or nothing process. Nor do you have to do the partial restores all at the same time. If days after the first partial restore you find something else you want you can restore just that.

Mac Pro SSD drive and libraries

Similar Messages

Maybe you are looking for