Mac Pro takes few minutes to shutdown

since a long time,my mac pro takes a few minutes to shutdown after using the shutdown-menu.
is there anyone, who has the same problem and knows a solution?
bst rgds from germany!

USB and FireWire devices?
Have you run disk repair utilities? especially Disk Warrior 4.1.1 or TechTool Pro 4.6.2?
Cloned your system and tried with that?

Similar Messages

  • Mac Pro freezes few minutes after starting download of additional content

    Hello everyone!
    So... I've downloaded Logic Pro X from the App Store today. Install and download of basic content went smoothly, but problem occured when I started download of additional content. Few minutes after download had been started, whole computer would just freeze, and I would have to shut it down by holding the power button. I tried downloading just small packs of content but it didn't help every time, in 80% cases it would freeze again.
    Logic was never installed on this machine earlier, at least not after clean Mavericks install few weeks ago.
    What could be the cause to this problem, and can any of you help me?
    Thanks in advance.
    Dragoslav

    I couldn't move the cursor and clock stayed on the same second for more than 20 minutes...

  • I downloaded mavericks and now mac pro takes a minute to start up

    How do I fix this???  Downloading Mavericks has slowed my start up to over a minute!

    OSU Beavers,
    it isn’t Apple’s responsibility to keep track of what your software needs to run; that’s your responsibility. For example, anyone who relies upon PowerPC software running under Snow Leopard should not accept an OS upgrade, because no version of OS X after Snow Leopard supports Rosetta, which is what allows the execution of PowerPC software under Snow Leopard.
    Which of your drivers did the people at the Apple store tell you were outdated under Mavericks?

  • Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

    Hi Linda,
    Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
    You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
    In Sys Pefs>Displays, can you set the resolution?

  • MICROSOFT FOR MAC FREEZING EVERY FEW MINUTES!

    Does anyone know why whenever I'm working on Word or Excel on my Macs, that every few minutes the application freezes, indicating that I have to go & kill 5-10 minutes before I can continue with my work?
    It's very frustrating :-(
    I'd be grateful for any help / advice.
    Thanks.
    Gareth

    Try repairing your drive for starters.
    For another, killing can leave open files corrupt.
    iMac (Intel)
    You may want to look into more thorough steps to troubleshoot, include more details, check Mactopia or Microsoft community forum for Office.
    Office 2011
    Office 2008
    Latest 2011 version on Amazon
    http://www.amazon.com/Office-Mac-Home-Student-2011/dp/B003YCOJA8/

  • Problen pening FIRST email when opening Gmail. Takes few minutes to load.

    Updated to new firefox as I had problem when I tried to "open a new tab". After installing update I now have problem opening FIRST email when opening Gmail. Takes few minutes to load. After the first one, then all the others open instantly w/no problems. I have not noticed other problems on computer.

    No problems here, so no fix required.

  • First G5 Quad says AppleSMU System Shutdown cause =3, now Mac Pro says -128 as a shutdown cause.

    A weird error I can't seem to troubleshoot easily through research has happened to my 2010 Mac Pro. Its called AppleSMU -- Shutdown cause = -128 = Does anyone have an idea what -128 it? I know what -1, -2, -3, -110(Power supply) all mean, but -128?
    To further troubleshoot the problem I rebooted in safe mode and everything seems to be working normally. My Mac Pro's temps are within operating range as well as the PSU. Can someone shed some light on what -128 means? Does anyone have a list of Apple shutdown codes with their meanings? I am going to attempt to run ASD and AHT tonight to see what the problem could be though.
    Thanks.
    Its like my G5 is running without problems, where as my Mac Pro(just by not using it for almost a week) is now giving me a shutdown cause of -128.

    Wow...  I found the problem, totally unexpected.
    It was a misbehaving UPS unit.  Not anything with the computer at all !!  
    It had never happened while I was around to see it before.  With the computer plugged directly into the wall, no more recurring rebooting.
    I think it's a worn out battery in my UPS.  Now, if I could only get all those computer diognostic hours of my life back. 

  • If i used parallels in a mac pro take 16 ram is useful?

    if i used parallels in a mac pro take 16 ram is useful?

    erik193,
    in Parallels Desktop, you’ll need to divide your RAM between your host OS (OS X) and your guest OS (e.g. Windows). How much RAM you should allocate to the guest OS will depend upon what you need to do in the guest OS.

  • Mac Pro 5,1 hangs on shutdown

    I use a 2012 3.33 GHz 6-core Mac Pro 5,1 in my recording studio, running OS 10.9.2 with 16 GB RAM. I use all of the PCIe slots:  slot #1 is the ATI Radeon HD 5770 graphics card, #2 is a Universal Audio UAD-2 Quad card for my powered-plugin library, #3 is the Avid Pro Tools HD-Native card and #4 is an OWC Accelsior 120GB 6G SSD which I use as my primary Pro Tools production drive.
    Ever since I upgraded to Mavericks and added the Accelsior SSD (this January) the computer hangs on shutdown and occasionally on startup. With shutdown it's the same every time - when I shut it down I get a blank gray screen with only the cursor arrow showing, and I can still move the arrow around. After a few minutes I hit the power button to force it to shut off.
    The machine also runs very sluggishly and takes forever to boot up.  It almost as if there are a ton of hidden processes bogging it down.
    I've checked and re-checked for viruses, I've reset the SMC and PRAM, I use Disk Utility to verify all my drives and repair all the disk permissions about 3 times per week, and I do daily diagnostics with Tech Tool Pro 7.  I'm about to pull all the PCIe cards except the graphics card and disconnect all peripherals except keyboard and mouse and then reconnect everything in steps but before I do all that I was wondering if any forum participants have dealt with a similar problem ?
    - Lang Doogie

    You could try a different SSD than the Mercury model from OWC.
    Also, any and even the ones from OWC should have TRIM enabled and you do not.
    I have a number of Samsung SSD and just noticed one $110 250GB
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE250BW/dp/B00 E3W1726/
    Different firmware can matter.
    http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE250BW/dp/B00 E3W1726/ref=sr_1_1?ie=UTF8&qid=1410381741&sr=8-1&keywords=250GB+SSD

  • Mac Pro takes more time to boot than average

    Okay, well my Mac Pro (2008) takes anything between 40 and 48 seconds to boot (that's the time between pressing the power button and seeing the desktop with mouse movement). Being a long-time PC user, this boot time is MUCH faster than anything I've used before, but apparently it's longer than it should be. I was recently in a forum where most Mac Pro users had boot times of anything between 25 and 35 seconds.
    As for hardware, I have no peripherals plugged in (except for Apple mouse and keyboard). The major software that I've installed is the Adobe Master Collection (including programs such as Photoshop, After Effects, Encore, Premiere Pro, Illustrator, InDesign, Dreamweaver, Flash, Fireworks, VersionCue, etc.)
    I've looked at my Console messages, and I've noticed that the message "kcdmond cannot retreive the computer's local Hostname, retrying..." is repeated 3 times. This repetition takes up 20 seconds. See all the Console messages during boot-up below:
    18/4/08 1:00:53 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    18/4/08 1:00:53 PM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    18/4/08 1:00:53 PM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
    18/4/08 1:00:53 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    18/4/08 1:00:53 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    18/4/08 1:01:01 PM com.apple.kdcmond[35] kdcmond cannot retreive the computer's local Hostname , retrying ..
    18/4/08 1:01:06 PM com.apple.kdcmond[35] kdcmond cannot retreive the computer's local Hostname , retrying ..
    18/4/08 1:01:16 PM com.apple.kdcmond[35] kdcmond cannot retreive the computer's local Hostname , retrying ..
    18/4/08 1:01:21 PM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[76]) Exited: Terminated
    18/4/08 1:01:21 PM com.apple.launchctl.Aqua[84] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    18/4/08 1:01:22 PM com.apple.launchd[71] (0x1010d0.VersionCueCS3monitor) Failed to check-in!
    18/4/08 1:01:25 PM iChatAgent[106] WARNING: AbstractService loginIfAvailable: SCNetworkCheckReachabilityByName failed!
    18/4/08 1:01:26 PM iChatAgent[106] WARNING: AbstractService loginIfAvailable: SCNetworkCheckReachabilityByName failed!
    18/4/08 1:01:31 PM com.apple.SystemStarter[28] Starting Aladdin USB daemon
    18/4/08 1:01:51 PM com.apple.launchctl.System[2] BootCacheControl: could not fetch history: Cannot allocate memory
    18/4/08 1:01:51 PM com.apple.launchctl.System[2] BootCacheControl: could not stop cache/fetch history: Cannot allocate memory
    I have a few questions based on the above:
    1. What is kdcmond, and why can't it find the host name?
    2. Why is the error message "Failed to check-in!" for Adobe VersionCue appearing? (I've already specified in the VersionCue settings that I do not want it to activate anything on start-up.)
    3. What is "Aladdin USB daemon"?
    4. What is BootCacheControl, and what is with the "cannot allocate memory" errors?

    Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
    I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
    I've included the most recent Console messages below:
    22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
    22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
    22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
    22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in!

  • MacBook Pro takes 7 minutes to restart. Is it ok?

    I have a MacBook Pro:
      Nombre del modelo: MacBook Pro
      Identificador del modelo: MacBookPro9,2
      Nombre del procesador: Intel Core i5
      Velocidad del procesador: 2.5 GHz
      Cantidad de procesadores: 1
      Cantidad total de núcleos: 2
      Caché de nivel 2 (por núcleo): 256 KB
      Caché de nivel 3: 3 MB
      Memoria: 8 GB
      Versión de la ROM de arranque: MBP91.00D3.B09
      Versión SMC (sistema): 2.2f44
      Número de serie (sistema): XXXXXXXXXXXXXXXXXX
      UUID de hardware: DB159CB2-7F94-58EE-88AC-D57D9BA77BD4
      Sensor de movimiento repentino:
      Estado: Activado
    When it becomes slow during the day, I restart it. Sometimes it takes very long just to shut down (the spinning bars keeps rotating in a black background), approximately two minutes. So, I rather simply turn it off (I click OK in the "do you really want to do it" warning), this method is faster.
    Either way, my MacBook takes long to restart. It begins with a grey background for a minute or less, then a slim bar appears under Apple logo and starts to fill. This process takes three minutes, more or less. Then, when the bar is filled completely, the login screen with my photo appears. I login and immediately the pesky warning "Do you want to reopen application" appears; I click "Cancel". The desktop background picture appears, but just that, no menu bar, no dock, no icons. MacBook stays in this state for two and a half minutes. Then dock appears, no menu bar yet. I try to start an application with the Launcher icon in the dock but the screen gets blurred with the legend "Loading applications..." and MacBook stays in that state for another minute or more. I scape this blurred screen, I try to click something else but nothing is clickable, until menu bar appears. Then starts loading, clock mini icon, battery, TimeMachine, BlueTooth, iTranslate, DPS and other icons painfully slow. When everything seems to be on place, I click any item in the menu bar and the computer doesn't responde until the third click. Then everything starts working normal... until mid-afternoon, when the computer has become so slow that I have to restart it again.
    As you can see, it is really frustrating, painful, unproductive.
    Is this normal?
    What can I do?

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • MacBook Pro takes much time for Shutdown (More than 1 min.)

    I have a MacBook Pro, and some weeks ago, it takes much time for shutdown.
    I've tried to install the 10.5.2 update, but nothing solves.
    My mac takes for shutdown 1 min & 30 seconds every time. I don't understand. Why?
    What can I do? I tried to repair permissions and reset the PMU, but the problem still there.
    Help me! Please!
    Thanks
    Sorry, but I'm spanish and it's possible that I've made more mistakes writing in English.

    Thanks. I tried to dissable an EyeTv option, then EyeConnect don't appears in the Activity Monitor. This is the result:
    Now, my MacBook Pro takes only 35 seconds for shutdown. I think is better than yesterdey, but is more than the 5 seconds that you described in the last post. Is 35 seconds a good time? In this 35 seconds, I only can see the background image, without icons and without the finder menu bar. After 35 seconds, Mac is off.
    How can I disable iDisk sync? I have a free mac Account, but is expired and then I can't use iDisk, only the name in iChat. But, is iDisk enabled?

  • Brand New Mac Pro takes 1Min 20 to boot

    Hi people, just got this brand new Mac Pro, was a dream to get, however first one i received i had to send back as it had a faulty hard drive bay which didnt read the disks. I then received this replacement and this second machine had to have the airport card replaced as it was faulty. I also notice that it takes 1min 20seconds to boot to login screen. It is a brand new 3.0 8 Core with 10GB Ram. My macbook pro boots in less than 20 seconds. Is this normal of the Mac Pro?

    Sorry, I didn't make myself clear.
    First of all, I agree with everything in your post. I just wanted to know why you said "The amount of RAM has nothing to do with how slow or fast the system boots." You see, I have the same problem on my iMac, it occurred right after I installed extra memory. The boot time almost doubled. The mac was a few days old so I assumed it was because of the RAM. But if you are right, my assumption was wrong and I have to look to other options. But I was just wondering, how do you know? That's why I asked you to explain your answer.
    Second, the PS was back on topic and not in reply for your answer. For example, a few months ago, one of our macs had the same problem and it was fixed after we removed all the extra fonts the operator had installed.

  • Just ordered a Mac Pro, A few questions

    I just ordered a Mac Pro, with a few options from apple, and some parts from Newegg. I just have a few questions.
    What webcam should I get?
    I have 3 500 GB HDD's one for OSX, one for Vista and one for Time Machine. Is there a way to make the OSX drive and windows drive play nice (read/write access) with each other?
    How hard is it to set up boot camp?
    What does it take to prepare the DVR-115 to be added? Does the front face plate have to be removed?
    I'm sure more will come up, so I'll keep asking

    Vista will format its drive using NTFS which is a read-only filesystem to OS X. You will not be able to exchange files across the OS X and Vista drives. You can install third-party software in Vista to enable read/write of Mac drives - MacDrive by MediaFour.
    Boot Camp setup is quite easy. You already have it so open the Boot Camp Assistant and click the button to print out the documentation.
    Installing the extra optical drive is done inside the MP box. There's a mounting tray and assembly. There's an Apple manual for the installation: Optical Drive Carrier Replacement Instructions.

  • My Mac Pro takes long time to load mail and start applications

    My 13-inch early 2011 Mac Pro runs very slowly, particularly when downloading Apple Mail and when starting applications.
    Here is what I get with EtreCheck:
    EtreCheck version: 2.0.11 (98)
    Report generated November 6, 2014 at 7:44:23 AM CST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.7 GHz Intel Core i7 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.9.4 (13E28) - Uptime: 4 days 17:41:5
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (340.75 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.cisco.nke.ipsec (2.0.0) Support
      [not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
    Startup Items: ℹ️
      CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AOSNotificationOSX.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [running] com.epson.epw.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.seagate.SeagateStorageGauge.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
      [failed] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.memeo.Memeod.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      macfusionAgent UNKNOWN (missing value)
      iTunesHelper UNKNOWNHidden (missing value)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
      Spotify ApplicationHidden (/Applications/Spotify.app)
      Google Drive Application (/Applications/Google Drive.app)
      Activity Monitor Application (/Applications/Utilities/Activity Monitor.app)
      VidyoDesktop ApplicationHidden (/Applications/Vidyo/Vidyo Desktop/VidyoDesktop.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      AdobePDFViewer: Version: 10.1.12 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
      MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
      RealPlayer Plugin: Version: (null) Support
      Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 Support
    Safari Extensions: ℹ️
      Dashlane
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      FUSE for OS X (OSXFUSE)  Support
      Java  Support
      TeXDistPrefPane  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: NO - Auto backup turned off
      Destinations:
      FreeAgent GoFlex Drive [Local]
      Total size: 1.00 TB
      Total number of backups: 28
      Oldest backup: 2012-01-29 05:38:02 +0000
      Last backup: 2014-10-05 11:34:28 +0000
      Size of backup disk: Excellent
      Backup size 1.00 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          2% WindowServer
          1% loginwindow
          1% PluginProcess
          1% Microsoft PowerPoint
          1% opendirectoryd
    Top Processes by Memory: ℹ️
      223 MB Mail
      69 MB WindowServer
      64 MB Memeod
      52 MB mds_stores
      52 MB systemstats
    Virtual Memory Information: ℹ️
      26 MB Free RAM
      933 MB Active RAM
      916 MB Inactive RAM
      1.08 GB Wired RAM
      10.18 GB Page-ins
      526 MB Page-outs

    Check out ds store's excellent user tip - Why is my computer slow?
    Even a full one minute can be too long, depending on your login items...
    Clinton

Maybe you are looking for

  • The invocation resulted in an error: java.util.NoSuchElementException

    I am trying to implement sftp protcol for oracle service bus using business service. While invocation it is throwing "The invocation resulted in an error: java.util.NoSuchElementException" error. Does any one know the reason for it?

  • Problem in parameter query.

    Post Author: eaglesoft CA Forum: Data Connectivity and SQL I'm using Crystal reports xi. I have problem on parameter fields.    field name-EmployeeCode, datatype-String.In report,I kept the following query in selection expert,(EmployeeTable.EmployeeC

  • Displaying item value on basis of pop up lov value

    Hi , I have created a form on which i have a pop up lov item whose values are getting displayed on basis of a table column.Now my requirement is that when a user select a value(for ex: say an code i.e 123) from pop up lov then on basis of this value

  • ISight and a G5

    Hi, Just got a isight from a friend and hooked it up to my G5 Dual 1.8 running 10.6, runs fine with photobooth and ichat but when I try Skype it crashes my computer with a K.Panic. Skype doesn't have the isight as the selected video cam, when I try t

  • SEND SPOOL REPORT AS E-MAIL

    Hi, How do I send a spool report as an e-mail? NOT as PDF file. If we can send it as a text file that would also be fine, but preferably as a Spool report as it is (non-editable).