Mac Pro to Epson Stylus NX420 printing issue

I have not been able to print from my Mac to my Epson printer. Network status on printer report shows everything passed (password, wireless network name, communication mode check, etc.) yet when I try to print, message I receive is "printer not connected"??? help

Longshot because my issue is with a PC and an epson printer. But I recently needed to uninstall and reinstall the epson software. You might try doing that.
I was having issues printing wirelessly, both from my laptop and my ipad/ipod. It started working after I uninstalled/reinstalled the software. I also didn't install the e-print and webprint. Don't know if that's a factor or not, but if you choose to reinstall you may want to do it in stages.

Similar Messages

  • How do I print wirelessly from my Mac Pro to Epson XP-810 printer

    I recently bought a Epson XP-810 printer and conected to my WiFi wireless router ASUS N750. The printer's test sheet states that network is working correctly but a "Router / Access point channel" conflict has been detected. I'm using a macbookpro with the current Maverick OS. The system setting shows the printer is on idle, but when I try printing wirelessly from laptop it doesn't print.
    Any assistance or advice would be greatly apprecite it.

    Do you know the printer's IP? If you have it you can use Network Utility to ping the printer. Its in System / Library / CoreServices / Applications.
    Enter the IP in the empty field, the number of pings you want to send, then click Ping.
    The results might help locate the problem.

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • Hi, I have a problem with my Epson Stylus NX420. I had it connected and it worked fine but then all of a sudden it just stopped. It said it was offline, but it wasn't. So I tried to reinstall the printer, so i deleted it and clicked the   button to add

    Hi, I have a problem with my Epson Stylus NX420. I had it connected to my computer, and it worked fine. But I preformed a remodel and before the printer was connected to a windows desktop, and now it is not. I don't know if this could the be the cause of the problem. But I tried to print something and it showed me the printer as offline, but it wasn't. Thus to try to fix this, as I have done before I deleted the printer and tried to add it again. But as I went to add it, the printer was not there. I have searched the internet for an answer and I have found nothing. I do not understand why this has happened, nor how to fix it. Please help me.

    Because you had the printer connected to Windows, the print queue on your Mac was for this connection. With you moving the printer away from the Windows computer, the print queue on the Mac will no longer work and will show offline. So for the new connection of the printer you have to create a new print queue.
    Now the question is; how is the printer connected to the Mac. If it is connected by USB to the Mac then it should appear in the Default Add Printer view. If it is connected to the Mac via some other method, then could you reply with how it is connected.
    If it is connected to the Mac by USB then the most likely cause for the printer not appearing in the Default Add Printer view is thenUSB printer cable. So try disconnecting it and reconnecting it or even try another USB printer cable.

  • How do i install epson stylus NX420 series printer

    I was given Epson Stylus NX420 3 in 1 printer with my MacBook Pro and would like to set it up but when I insert the disc it comes out.  How do I go about downloading the disc to set up the printer?  Wireless.

    Hi Maryann..
    You can also download the drivers (software) from the Epson site here.
    The drivers on the disc may not be up to date, so downloading from Espon assures you have the lastest driver version.
    Once the drivers are installed, open System Preferences > Print & Scan then select the Print tab.
    Click + to add a new printer and follow the instructions.

  • Getting lousy Image Prints from a Epson Stylus P2200 Printer & IMac (Intel)

    Ok here's the health warning - I'm a recent Windows to Mac convert - so this may well be me - but here goes ...
    I have an Epson Stylus P2200 Printer (which works great on Windows XP) and I am having trouble printing anything close to decent looking photos when its connected to the IMac. I've tried with both Aperture & Photoshop Elements - same problem/outcome. The photos come out in low resolution & v. poor color quality.
    I'm using the Stylus Photo 2200 (FW) driver that came standard with the IMAC - but it has very limited features compared to Windows - I have selected a ICC profile (downloaded from Epson) that matches the paper I am using.
    I suspect its me - but can anyone shed any light on where I'm going wrong?
    Does anyone have any experience of this driver - is it me? or is there something I'm missing?
    Thanks
    Chris
    IMac (Intel)   Mac OS X (10.4.6)   1.5GB RAM

    I have two Epson printers, a 2200 and it's working fine with my MacBook Pro. Before you fiddle around with the Color Management, make sure your printer is in good working order and the latest Intel drivers are installed.
    Banding is not normal printer behavior. You mentioned that you're using a scan of a MacBeth color checker chart. You didn't say how the scan was made, but I'm assuming you know for sure that the banding is not in the image. On my 2200 I might get bad color if I don't use the correct profiles but I've never had banding problems unless the print heads need cleaning.
    Here are my suggestions:
    1. Don't use the drivers bundled with Mac OS X. Download the latest ones from support.epson.com. If you haven't checked recently, check and download them again. The latest driver posted is 3.0aAs dated June 15, 2006.
    2. Epson's instructions with the latest 2200 driver is to do a "Reset Printing System" first, then restart your Mac before installing the driver and adding the new print queue.
    3. When adding the printer with the Printer Setup Utility, make sure you're adding the Stylus Photo 2200 that appears under the Epson USB or Epson FireWire category depending on whether the 2200 is connected to your iMac with FireWire or USB. Note that unlike the old PPC 2200 driver which has separate "printers" for Borderless and Minimize Margins, Roll Paper and Sheetfeed, the new driver installs only one printer. Roll paper and borderless printing options are now handled in the Page Setup dialog like the R-series printer drivers. (Unfortunately, this causes incompatibilities in a mixed PPC and Intel printer sharing environment).
    4. Run the Epson Printer Utility and use it to check printer status and do a nozzle check. This will help check if the Mac is communicating with the printer.
    Now you can start making your test prints. Most likely, you'll be using the Print Settings and Color Management options in the Print dialog frequently. If the prints are coming out halfway decent or better, then you can be quite certain that the printing system is set up properly and now you can worry about the ICC profiles and color management.
    Also, don't forget to download the better profiles for the 2200 from support.epson.com.
    And, if you're managing color in Photoshop, turn OFF Color Management in the Print dialog and vice-versa. Otherwise, you're managing color twice!

  • After installing Epson Stylus SX535WD printer on Windows 7 computer Firefox produces a pop-up error box when I launch Firefox or open Web page

    After installing my new Epson Stylus SX535WD printer on my Windows 7 32 bit computer, Firefox now produces a pop-up error box every time I launch Firefox or open a new Web page in it the following error box pops up multiple times: [JavaScript-Application] Server could not log you in. This error has never error occurred before I installed the printer.

    Posting the same question multiple times will not get you an answer any faster..

  • I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    I received a low ink warning on my mac for my epson artisan 837 printer. I replaced the cartridge that was low but it still reads low ink on the mac but reads full on the epson control panel. I am also receiving a communication error between the mac

    What exactly is the error?
    And, we'd need some info re. your Mac model and OS version - you are not running iOS on it.
    You need to realize that this model has been discontinued and the last driver updates are dated about a year ago. If you are running Mavericks, there may not be an updated driver for it. But you can try to delete the printer and add it again to see if that will work.

  • Illustrator cs4 and Epson Stylus R2880 printing problems

    I am having printing problems.  I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print.  The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom.  I tried playing with the x and y's but have no idea what I am doing.  Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

    Hi Wade,
    I have tried playing around with that but I am not sure what I am doing.  Here's what it is set at.
    On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
    When I check the 'fit to page' button it actually puts a bigger white boarder around it.  The fit to page number says (96.4706%).  Shouldn't it say 100%?  If I leave it as do not scale I still have a small border around it.
    I am not sure about the xy settings.  When I have it to 'fit to page' it is:
    Top left corner (0,0)  Top right corner (0,0)
    Bottom left corner (0, .1632)  Bottom right corner (0, .1632)
    If I have do not scale button clicked:
    Top left corner (0,0)  Top right corner (0,0)
    Bottom left corner (0, -.225)  Bottom right corner is (-.3, -.225)
    Do these settings look correct?  If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
    Thanks for responding,
    Celeste

  • How to install Epson Stylus C88  printer on 10.9.3?

    How do I install Epson Stylus C88+ printer?  Is it supported by 10.9.3?

    Hi Janet ...
    There is a driver available for v10.9 Mavericks to download here >  http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=58602&BV_UseBVCooki e=yes&infoType=Downloads&platform=OSF_M_X9
    After you download the driver, open System Preferences > Printes & Scanners then select the Print tab.
    Then click ➕ to install the printer.

  • Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

    Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • Installing Epson Stylus SX535WD printer causes pop-up error box in Firefox

    After installing new Epson Stylus SX535WD printer on computer, Firefox now produces a pop-up error box. every time I launch Firefox or a new page in it the following error box pops up multiple times: [JavaScript-Application] Server could not log you in.

    Posting the same question multiple times will not get you an answer any faster..

  • Epson Stylus C48 printer - Compatible with the G4?

    Hello
    Please can somebody tell me if the Epson Stylus C48 printer is compatible with the G4 using OSX10.4.1?
    Many thanks!

    A Google search reveals "Microsoft Windows 98SE/2000/ME/XP" only.
     Cheers, Tom

  • Photoshop CS6 on a Mac using an Epson Stylus PRO 3800 printer.

    Installed Photoshop CS6 on a Mac Version 10.9.4. Installed an Epson Stylus PRO 3800 printer. When I try to print through Photoshop the dialogue box won't give the option to color manage. I followed the link suggested in the print dialogue box but that was for CS5 and said it will only work with TIFF files. I work with .psd files. I downloaded it but my Mac will not let me open it. Any help would be most appreciated. Mary Ellen

    From Chris Cox: If you choose "Photoshop manages color", then Photoshop is managing the color and the printer driver is supposed to disable it's color controls (and let Photoshop manage the color).
    If Photoshop is managing the color, then there is nothing else for the printer driver to do - so it grays out it's own color controls because they don't apply while Photoshop is managing the color.

  • Printing Color Problems mac pro to epson r2400

    I have a Mac Pro upgraded from a G5 and I am having difficulty printing the colors properly to my Epson r2400. I downloaded the newest driver from epson 6.57 but it is no different and still have colors printing wrong. Looks good onscreen but nothing now prints proper colors. I tried to save the illustrator file from CS5 to CS4 and print from G5 but now the file and colors won't even print from the older computer which used to be spot on colors (after I had to call to have this problem fixed.) Any suggestions? Does Mac Pro have a new driver to fix? Epson seems to not respond.

    Longshot because my issue is with a PC and an epson printer. But I recently needed to uninstall and reinstall the epson software. You might try doing that.
    I was having issues printing wirelessly, both from my laptop and my ipad/ipod. It started working after I uninstalled/reinstalled the software. I also didn't install the e-print and webprint. Don't know if that's a factor or not, but if you choose to reinstall you may want to do it in stages.

Maybe you are looking for