Mac Pro turning and turning ... blocked everywhere
Hi
If someone kind can help me :
My Mac Pro is turning and turning, bloqued when i want to go to Safari, mails ... the connection with internet by WIFI is good. I think that it is perhaps a problem with a too big "fichier" i received by mail ?
Th u by advance :-))
Hi
If someone kind can help me :
My Mac Pro is turning and turning, bloqued when i want to go to Safari, mails ... the connection with internet by WIFI is good. I think that it is perhaps a problem with a too big "fichier" i received by mail ?
Th u by advance :-))
Similar Messages
-
i do most of my work on a mac pro (1,1)
and this evening at precisely 8:04pm my mac pro clicked and then turned off
the computer did not shut down, it just turned off
i should note that the click i heard was the same as the one that i hear when i first press the power button to turn it on
attached is console starting from 15secs before 8:04pm
http://img705.imageshack.us/img705/6112/picture3o.png
my mac is on an APC ups and the power was stable at 8:04pm
programs running
mail
firefox
remote desktop
ichat (aim and bonjour)
internet sharing (to ethernet 2)
any thoughts on what could cause a power off?Same here. MacPro 3.1.
ALSO on an APC (Back UPS RS-1500). Woke up yesterday to the sound of it (UPS) beeping, red light on, computer off. Happened today, same way. Checked energy saver settings.
Wasn't using it, so did not hear click.
MacPro starts ok, shuts down ok, sleeps ok.
I had it plugged into a wall socket for two weeks while I configured it. No problems. Only after plugging into to the UPS. This UPS has served well backing up a Dual G5 tower previously.
Battery shows 100%. No heavy periphs (like printers) online.
Had a multimeter in the UPS the first time around and got 122 volts in the line.
Could it be the UPS? -
Why does my Mac Pro turn completely off while in the sleep mode?
Why does my Mac Pro turn off completley overnight when I had placed it in the sleep mode?
A power fluctuation may also shut your computer off from sleep mode.
Is there anything in the System Log overnight?
Here is a related article:
About diagnostic and usage data in OS X Lion and Mountain Lion -
Finally I decided to move forward and installed Mountain Lion 10.8.4 (with all the updates). Now I am facing a dilemma, my external iSight Camera is working fine regarding the video fee but the Mic is useless. I am using a Mac Pro 2009 and a Apple Cinema Display 30". I checked all the trends about iSight External devices but no one has a really specific solution for my problem. Firewire is not longer supported with Mountain Lion? By the way my iSight was working perfectly before. So I am wondering if something wrong happened with the OS and the support for this kind of device? I reset the PRAM, the SMC, even I reinstalled the MAC OS X Mountain Lion (10.8.4) from scratch. So I am wondering if the problem is that ML is not longer supporting this device or what is the issue here.
Hope someone can help me with it!
Thanks
JalcomJalcom wrote:... Firewire is not longer supported with Mountain Lion?...
Not true. External iSight works fine with my '09 Mac Pro and 10.8.4.
Jalcom wrote:... So I am wondering if something wrong happened ...
So it must have.
Jalcom wrote: ... help me with it!...
You have tried several good things, but there may be other suggestions from http://support.apple.com/kb/HT2090 that you have not yet considered. Be sure to check more than one Apple app in more than one user account to help you pinpoint the cause of your trouble. Then you will know what to fix.
In addition to the Apple troubleshooting, check your > System Preferences... > Sound > Input to verify that your iSight's mic is selected, not muted, and that its volume setting is properly adjusted. You may need to check this again after restarting Mac or changing apps that use the mic.
Also, be certain that the apps you are testing are configured to use iSight's mic. Different apps select the mic in different ways. For example, QuickTime X allow selection among various microphone alternatives via one of its preferences as shown in the image below:
(I was using my Display microphone and did not have my external iSight connected when I made this image. Therefore, there is no iSight mic shown in my list of mic choices above. If your iSight's mic is properly connected, turned on, and recognized by your Mac, iSight will show in your QTX microphone preference choice list.)
If you are trying to use your iSight with a Flash based web site, also check your Mac's > System Preferences... > Flash Player > Camera and Mic settings to verify that your Flash system preferences are not blocking your mic.
Some other apps may offer mic and or camera selection via their application menus. If you have trouble finding out how to select the iSight internal mic in other apps, check each apps' Help or post back the name of the app whose selector you cannot locate here so we can try to help.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.8.4 24" LED Cinema Display External iSights -
I have posted in Mac pro Eplehust and Oslo in early June to change videokart (which has changed six months ago) got my Mac a month by mail, with the terrible damage the body, but the packaging in which he lay was not damaged. I sent him back to change the computer, 4 weeks, I changed it and checked 2 more weeks. as a result of three days ago, got back, more than half the programs crash, I can not open or closed CDrom, some programs do not come off or stop, and stop responding commands, turn it off only mechanically, not any excuses, I did not get to the store, what should I do?
My patience is crowded, nerves on edge, I have lost my time with the worst service of my life, the only thing I see its the draw Eplehuset and apple to court.
my e-mail - [email protected]While writing I made a mistake... It is true I could become aware of the Scorpio incompatibility.
I also tried the same identical procedure with a Seagate one. This disk and the same procedure was performed by some people I know on many MacBookPro Mid-2010 and everything was OK.
We do not understand why this problenm occurs.
Furthermore, If I installed the system on the broken HDD (that works, but sometimes it fails so badly and makes the system experience kernel panic) I could boot from it.
I guess it is because of the **** Apple FIrmware written on the label.
Is it possible that I cannot manage to boot from my new HDD because it has not a "special" feature on it that makes it compatible with apple??? Why making things so **** difficult my god a closer world like Apple one is impossible to imagine.
However Shootist007 thanks for your message, but given what I said I do not think is a cable problem. -
Early 2009 Mac Pro, Mavericks, and Airplay
Yes, I'm sure this question has been asked and answered a thousands times, but I have been looking in vain for an answer that helps me.
I have an early 2009 Mac Pro, running Mavericks. I have a Denon AVR-1912 Receiver, which my iPhone and iPad see and can play through with no trouble. So can my MacBook Pro. I also have Apple TV, but I don't use it for streaming music because the Denon works well.
What I want to do is sit at my Mac Pro desktop and play songs through iTunes that play not only through my desktop system but through my home theater system (the Denon Receiver). I'm used to clicking on the little Airplay icon and getting to choose Single or Multiple speakers. When I go to System Prefs/Sound, I see my sound card (Presonus Firestudio) AND I see Apple TV and my Denon. So my computer is seeing them both.
Here's what happens. If I choose the Firestudio in System Prefs, it plays as always through my desktop system, but there is no Airplay icon in iTunes. If I choose Denon in System Prefs, iTunes plays music through the Denon AND I get the Airplay icon in iTunes. If i click on the icon and I choose Multiple, I can choose Airplay Device, which is already checked, and Computer. If I click on Computer, the Airplay icon disappears in iTunes, and the music starts playing through my computer's internal speakers, not through my Firestudio sound card, and it stops playing through the Denon.
Why does the Airplay icon not give me an option to play through my sound card and the Denon? Why, in other words, can't I do what I said I wanted to do in the third paragraph, above? Is it possible or is my Mac Pro too old?
Many thanks,
PaulI found out that the built in firewall interferes with AirPlay (which I know is weird).
Try turning the OS X firewall off using System Settings -> Security. If AirPlay now works, turn on the firewall and add "coreaudio" to the list of exceptions. This worked for me.
Coreaudio is the system driver for audio, by the way. -
i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?
If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.
-
User Contributed Tips in the Mac Pro Displays and the Mac Pro forum
*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips LibraryYou can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.
-
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
I have a new Mac Pro computer and have migrated my files from my older computer to the new computer. In trying to open a Lightroom catalog on an external hard drive I keep on getting the message "lightroom cannot use the catalog named " " because it is not writable and cannot be opened. I have fixed all the "permissions" and yet it will still not open. How do I fix this?
Hello Forum Members,
I figured it out. You have to select the actual logo of the Lightroom catalog and then click on "get info" and allow what ever your new user name to "read and write". That worked!
Henri Silberman -
I am running system 10.5.8 on my 17" mac pro laptop and using Firefox 3.6.17, I have tried on several occasions to install your new version 4 and when I drag icon onto my applications folder it tells me I have a newer version already there (which is now the 3.6.17). What is going on?
Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can with be done with no OS/Hardware issues?
babowa wrote:
Thanks; however, I was really referring to this: if it is preinstalled on a Mac, I believe the license is for that computer only (unlike an MAS purchased version which can be used on any Mac owned). Has that requirement changed?
At this moment, that's correct. The OS X license included with a Mac can only be used with that Mac. However, in the case the OP has purchased OS X Mountain Lion in the past, this may change -
moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?
When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around. -
I plugged a HDM1 cable from the Sony flat screen TV into a mac pro book and get not sound. great picture. Help?
Mac computers: Frequently asked questions about using ...
-
As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?
It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.
-
Mac Pro 2013 and Premiere Pro - The performance issue that Adobe don't want us talking about!
In May 2014 I bought a 2013 Mac Pro to help my business with the ever increasing demands video editing was placing on our systems. I was so excited to see how the 12GB of power the AMD D700s would affect my workflow and ability to edit footage seamlessly without delays to the creative process.
However, to my dismay pretty much since starting to work with the system I found that there was an issue with the GPUs, Mac OS and Adobe’s applications. It was first reported by many other users in early 2014 and as yet know one from Adobe has really commented officially on the issue.
Sadly it appears to still be present today and speaking with an Adobe rep confirmed this. Trouble is no one is doing anything about it. My hope is that, if you have watched this video and are experiencing the same issues then please let’s get the comments going, share and like the video and let’s get Adobe, Apple and AMD to pick up this with immediate haste! Thank you.
Below is a video of the problem I have been experiencing. It's a little long but I wanted to give a good account of the problem we are seeing so that someone can help! PLEASE, PLEASE, PLEASE help!
Mac Pro 2013 and Premiere Pro GPU Issue - YouTube
Thank you for your time and I'd love someone to help!Thanks for responding! It's such a pain and I have been chatting to one of Adobe's senior consultants about this and still none the wiser. I have sent my machine off to the retailer as it was still under warranty. Nothing wrong with GPU apparently which is a relief although I kinda wish it had been that as it would have been an easier fix. Adobe told me that working with H.264 is totally possible but if you have a complex sequence with multicam and nested video with effects applied then it will seriously hinder performance. Sadly transcoding to ProRes doesn't seem to help either and they suggested not adding any effects to the nested clips, flattening out the multi cams etc and this has improved things a bit. Sent a sequence to SpeedGrade the other day though and the machine had a fit. FCPX though seems to be working great and has a few advantages over Premiere so I may be making a switch for this type of work until Adobe can sort out this issue. I still feel that the application isn't fully making the most of the GPUs. In fact, I found out that multicam is actually all still on the CPU and that they are trying to implement GPU handling of multicam soon.
Maybe you are looking for
-
How do i turn off Mobile Me sync? It paralyzes my machine!
I no longer have my MobileMe account, but the MobileMe sync icon is still at the top right of my screen and periodically tries to identify sync conflicts (it says there are 24) and then totally slows down my machine to a crawl and the spinning wheel
-
Now it will not turn on. I have tried all the reset instructions with no luck. Neither iTunes nor any of my computers will recognize it when I plug it in. Is there any chance to get it working or am I out of luck? Please help if you can since I canno
-
PO item text does not display in form at first. Only after saving PO
Hi Guys, We're facing a peculiar situation. We print line item texts of a PO in the smartform. However what we noticed was that as soon as the PO is created and we choose to print the po, the item texts do not appear. When we checked in tables STXH a
-
How can I make the popup with empty fileds and create new record?
I would like to use a popup to create new record. I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button. however, the window fil
-
What does "*" mean in my query result?
Hello all, I met a problem in my query result which was some of cells in one KF column didn't display the amount but instead with * . Could anybody tell me what the wrong was? thanks Ryan