Mac Pro turns on and goes to desktop but won't do anything from there
Hey guys,
I've had my Mac Pro for about 3 years now (fully updated) and have owned macs for about 20 years now and have never run into this issue. Hopefully you can help. I can turn my mac on and reach the login screen. I login and reach the desktop. From there weird things start happening.
1. Safari won't load. My dock where the Safari button is goes into hiding the second I click on Safari. Nothing loads.
2. If I go to my main drive and click on the Applications folder, the window disappears and I'm back looking at my desktop.
3. If I try to open System Preferences it may come up and it may not. Depends on the time.
4. iTunes will still open and work (although all my iTunes files are on a separate harddrive).
5. If I try to Restart or Shutdown the computer won't. I have to manually shut it down by holding the power button.
6. If I mess around with trying to open things long enough (Safari, Applications Folder, etc) the entire computer will lock up. I can still move the mouse around but it won't do anything.
I have booted the computer from the Install Disc and have run Disk Repair and have even repaired permissions and still nothing fixes this issue. Does anyone have any idea on what to do?
Buy Disk Warrior.
Clone your system with SuperDuper.
Install a clean set of the system (erase and install) and full updates.
Gradaully test it out.
I would not use it as is.
Normally I would say, try a new "test" user account and see if the problem goes away (after you have a backup).
Your DVD is not 10.6.6, and Apple First Aid is not as thorough as say Disk Warrior, good start but not to do full reliable repairs.
Every hard shutdown etc just adds and corrupts the directory and file system.
You do have corrupt files, prefs and more.
I'm sure there is or ought to be some nice FAQs on system maintenance and repair for Macs.
http://www.thexlab.com/faqs/faqs.html
Similar Messages
-
Mac book pro,
Turns off and goes under protection, sometimes without any specific motivation, but most of the time when an External monitor is pluged-in.
I use it when I work with final cut pro, and this problem it's becoming huge and changing my workplans....
It can turns off also 10 times in two hours.
In many forums I read that the CPU temp could be the problem, but I've checked it and It's always around 62°-68°....
In some others they say that the new RAM could be the problem too.
Is anybody able to help me? (Underneath you can check the Panic Report and my mac informations)
Thank you so much.
Antonio
My mac Infos:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro6,2
Processor Name:
Intel Core i7
Processor Speed:
2,66 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache (per core):
256 KB
L3 Cache:
4 MB
Memory:
8 GB
Processor Interconnect Speed:
4.8 GT/s
Boot ROM Version:
MBP61.0057.B09
SMC Version (system):
1.58f16
Serial Number (system):
W80223V7AGZ
Hardware UUID:
3993F249-8480-5ABD-9846-88608D085469
Sudden Motion Sensor:
State:
Enabled
The report is this one:
Interval Since Last Panic Report: 687027 sec
Panics Since Last Report: 6
Anonymous UUID: EB3EFFB2-AFCE-472E-ADA1-F35EFF3C7BBA
Sat Oct 13 16:58:00 2012
panic(cpu 2 caller 0xa3dc9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa822c000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x7c6f3888 : 0x21b837 (0x5dd7fc 0x7c6f38bc 0x223ce1 0x0)
0x7c6f38d8 : 0xa3dc9b (0xc5328c 0xcc3800 0xc61e60 0x0)
0x7c6f3978 : 0xb58608 (0xe50bc04 0xe80b004 0x100 0x0)
0x7c6f39c8 : 0xb4f601 (0xe80b004 0x100 0x7c6f39f8 0xa2d778)
0x7c6f39f8 : 0x175b9a6 (0xe80b004 0x100 0x438004ee 0x2b1f6a)
0x7c6f3b38 : 0xb772b5 (0xe80b004 0xe80c004 0x0 0x0)
0x7c6f3b78 : 0xa46e7c (0xe80b004 0xe80c004 0x0 0x0)
0x7c6f3c18 : 0xa4355b (0x0 0x9 0x0 0x0)
0x7c6f3dc8 : 0xa4542a (0x0 0x600d600d 0x702a 0x7c6f3df8)
0x7c6f3e98 : 0x9d9582 (0xc1d00011 0xaa910001 0x20802040 0x7c6f3ee0)
0x7c6f3ef8 : 0xd9b57d (0xe08fc00 0x7c6f3f4c 0x0 0x7)
0x7c6f3f58 : 0xd9b71a (0xe076800 0xda2e54 0x7c6f3f78 0x2a45c9)
0x7c6f3f78 : 0x230235 (0xe076800 0x0 0x0 0x6c03)
0x7c6f3fc8 : 0x2a179c (0x863ea0 0x0 0x10 0xe980a84)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.31)@0xd98000->0xda2fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x9a8000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x9ca000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x991000
com.apple.nvidia.nv50hal(6.4.0)@0x1625000->0x1a39fff
dependency: com.apple.NVDAResman(6.4.0)@0x9d7000
com.apple.NVDAResman(6.4.0)@0x9d7000->0xcc4fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x991000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x9ca000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x9a8000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 563676343615
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.2.0 (addr 0x1495000, size 0x65536) - last unloaded 209721117821
loaded kexts:
foo.tun 1.0
foo.tap 1.0
com.parallels.kext.prl_vnic 6.0 11828.615184
com.parallels.kext.prl_netbridge 6.0 11828.615184
com.parallels.kext.prl_usb_connect 6.0 11828.615184
com.parallels.kext.prl_hid_hook 6.0 11828.615184
com.logmein.hamachi 1.0
com.parallels.kext.prl_hypervisor 6.0 11828.615184
com.paceap.kext.pacesupport.snowleopard 5.7.2
com.Apogee.driver.DuetFWOverideDriver 1.4.4
com.digidesign.iokit.DigiDal 9.0f4
com.AmbrosiaSW.AudioSupport 3.2
com.apple.driver.AppleHWSensor 1.9.3d0 - last loaded 44524746255
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 366
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.GeForce 6.4.0
com.apple.driver.AppleIntelHDGraphics 6.4.0
com.apple.driver.AppleIntelHDGraphicsFB 6.4.0
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBCardReader 2.6.1
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.iokit.AppleBCM5701Ethernet 3.0.5b8
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleFWAudio 2.6.2fc2
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.iokit.IOFireWireAVC 4.0.6
com.apple.nvidia.nv50hal 6.4.0
com.apple.NVDAResman 6.4.0
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBMassStorageClass 2.6.7
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B09, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 465,76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: iPhone, 0x05ac (Apple Inc.), 0x12a0, 0xfa140000 / 6
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 9
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3
FireWire Device: Duet, Apogee Electronics, Up to 400 Mb/secNever mind, I found it.
-
2009 Mac Pro turns on and then powers off a few seconds after.
Help!!!
I have two Mac Pro's with separate issues. First Mac Pro does turn on but then cuts off by the time it gets to the Login window. I opened it up and saw that when the computer is on, there is a red light in the middle of the processor board. Is this normal? And what should i do to see what is causing this? I had 16GB RAM but i tried swapping out chips to see if maybe it was a RAM issue. Same issue even if all i put in is 2GB of RAM.
Second mac Dosent even turn on. Also a 2009 model. the red light that normally blinks once when you plug power in on the Main board, doesn't even flicker. I feel it's the power supply, but before i try swapping power supplies i thought i would see if i could get a second opinion.
Please Help
ThanksOn your first example, if the Mac detects Directory Damage such that the Boot Volume cannot be mounted, it will run the equivalent of a Disk Utility ( Repair disk ) at Startup. If that does not repair the problem, you will not be starting up, so it powers down.
On the second one, the traditional method of debugging those difficult problems is to remove everything that could be dragging down power, and hope for the Chime. Yes that means everything. If you remove all the RAM, but it is otherwise working, it will flash the power light to indicate "not enough working RAM to start up". Add back some RAM and you should get the chime. add back the graphics card and you should get the blinking question mark. Add a boot drive and... so on. -
Hi friends, my macbook pro gives 3 long, 3 short and 3 long beeps. The LCD remains blank.
Try the next to last thread listed over on the right under the heading More Like This.
Allan -
New iPod touch. Been working fine, needed charging so have charged it for ages. Only apple icon screen is appearing and nothing else! Have tried re setting still nothing! Help!
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading. -
I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148 -
Hi dudes,
I installed recently two Mac Pro RAID cards inside their corresponding Mac Pro systems. Four 2 TB Hitachi SATA disks are contained inside each system, and configured as RAID 5. Yes, the operating system is installed on this RAID 5 volume in order to get the highest performance of the array, taking advantage of the RAID 5 protection (Autodesk Smoke runs in each system; this application works only with uncompressed video in real time). I already had tested both systems keeping separated the boot disk just for the operating system, and making the RAID 5 volume just with three 2 TB disks, but the performance was slow on both systems.
The performance is now very good, but unfortunately, in both systems happens that sometimes one of the disks goes offline with no apparent reason. The RAID Utility immediately reports the failure and it is mandatory to declare as spare the disk that went offline. Then the rebuild process begins, but in the meantime, the performance goes down in a noticeable way. Sometimes it is even worse, because the disk disappears completely. Then, it is mandatory to turn off the system, and boot it up again, in order to see in the RAID Utility the missing disk, which needs to be declared as spare in order to be reintegrated into the RAID 5 volume in a slow rebuilding process.
Some important remarks: this very new Mac Pro systems do not have the iPass cable (at least apparently; I already disassembled completely one of these systems). This cable is mentioned in one Mac RAID card manual that I found over the internet. The diagrams do not match exactly with the Mac Pro nor the Mac Pro RAID board. I did not find a proper iPass connector in any of the Mac Pro RAID cards (?!). So, my guess is that currently the communication between the system and its Mac Pro RAID card is just by means of the internal bus. I think that if the iPass connection were mandatory, the RAID Utility would report it with a noticeable error message. Please advise.
I think that these Mac Pro RAID cards need a firmware upgrade, in order to be able to work fine with big SATA drives. Again, please advise.
Thanks in advance from Mexico.
Sincerely,
Martin Ponce de LeonHi Grant,
Thank you for your prompt response. The manual is a PDF document issued by Apple and it seems OK, but no updated to the latest Mac Pro system and Mac Pro RAID. I do not find the link where I found this manual. The systems belong to one of our customers. As far as I remember, in the printed manual included with the boards, it is not mentioned anything about the iPass cable, just about the battery cable. Do you know where can I get a PDF manual of the latest Mac Pro RAID card and the latest Mac Pro system? This client is far from our offices. So, I would prefer a PDF copy of this manual.
The drives that have gone offline, once they are back, are reported in a good status in the RAID Utility. Besides that, I have tested them in another system in our facilites, and all of them work fine. So, my guess is that the high capacity drives are not yet supported by the Mac Pro RAID card, or it requires a firmware update.
They do need to have in the same volume OS and video storage because three disks do no provide a good performance (they need also RAID 5), but four disks work fine... excepting when one disk is missing. Please advise. Thank you.
Best Regards,
Martin -
So I just bought a new Mac Pro, wireless keyboard and mouse. i am a first time Mac user. How do I even get started......connect the wireless mouse and key board to the Mac Pro desktop to even get started??
Just turn on the mouse and keyboard and observe that the green light comes on and starts to blink then turn on the Mac. The Mac should give you on-screen instructions.
-
i do most of my work on a mac pro (1,1)
and this evening at precisely 8:04pm my mac pro clicked and then turned off
the computer did not shut down, it just turned off
i should note that the click i heard was the same as the one that i hear when i first press the power button to turn it on
attached is console starting from 15secs before 8:04pm
http://img705.imageshack.us/img705/6112/picture3o.png
my mac is on an APC ups and the power was stable at 8:04pm
programs running
mail
firefox
remote desktop
ichat (aim and bonjour)
internet sharing (to ethernet 2)
any thoughts on what could cause a power off?Same here. MacPro 3.1.
ALSO on an APC (Back UPS RS-1500). Woke up yesterday to the sound of it (UPS) beeping, red light on, computer off. Happened today, same way. Checked energy saver settings.
Wasn't using it, so did not hear click.
MacPro starts ok, shuts down ok, sleeps ok.
I had it plugged into a wall socket for two weeks while I configured it. No problems. Only after plugging into to the UPS. This UPS has served well backing up a Dual G5 tower previously.
Battery shows 100%. No heavy periphs (like printers) online.
Had a multimeter in the UPS the first time around and got 122 volts in the line.
Could it be the UPS? -
Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD displayafter going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support
-
I bought Mac pro in china, and i have 2 systems: window7 and mac, and now i am in America, and i want to reset my Mac, so could the app store help me to reset my system, and update to , and i just want mac system. no window 7 system.
Just use the instructions in Boot Camp Assistant - same utility used to partition and setup Windows.
http://www.apple.com/support/bootcamp
Manual, FAQ, Support articles, etc.
there is a forum for Windows on Mac (Boot Camp)
https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons
You have a notebook MacBook, this is workstation/desktop forum
https://discussions.apple.com/community/notebooks/macbook_pro
http://www.apple.com/support/macbookpro -
Why does my Mac Pro turn completely off while in the sleep mode?
Why does my Mac Pro turn off completley overnight when I had placed it in the sleep mode?
A power fluctuation may also shut your computer off from sleep mode.
Is there anything in the System Log overnight?
Here is a related article:
About diagnostic and usage data in OS X Lion and Mountain Lion -
Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue
Hello!
Is there FIX / Workaround to Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue ? ( +w/ ATI Radeon HD 2600 XT display adapter+ ). Its really annoying problem :-/.
Main problem is when i start my Mac, my 30" HP screen dosen't wake up, it always on suspend mode. Sometimes it wakes up on the 3rd try orso, sometimes it ruins my motivation, ideas and i give up (talk about inspiration killer). If i connect PC Laptop to that screen, sreen wakes up straight away. ATI says display adapters "drivers" are included on the OSX install. Great. Weird thing is i didn't recognize this problem at all 6-8 months ago, so i thought my system is fine. So i can't return my HP screen anymore.
My choices are to buy another 30" screen or buy different display adapter; there's two choices atm i think;
*-ATI Radeon HD 3870 512MB PCI-E for Mac Pro (~200€)*
*-EVGA GeForce GTX 285 Mac Edition 1GB (~500€)* (this one has seperate OSX drivers).
_Can anyone confirm if those display adapters work with HP 3065 30" screen ?._
http://forums.macrumors.com/showthread.php?t=687624
http://discussions.apple.com/message.jspa?messageID=9388978
http://discussions.apple.com/thread.jspa?threadID=1794155&tstart=60
Br,
PetriThanks for all information. I haven't been Mac user very long . I just want to get rid of my annoying problem. I'll do music composing mainly on my Mac Pro. So, it dosen't really matter what display card i'm using, i want to just make sure it works with HP 3065 .
-
I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?
Is a version of Mac OS running on this Mac? Reboot and hold down the option key.
Maybe you are looking for
-
How to get Current day and month value in Stk applets
Friends please provide me the hint to get the Current Value of month and date from the Mobile equipment(ME). please send feedback to [email protected]
-
Multiple NLS in one web server
Hello all , currently i have the following: DB1 ,ar8mswin1256 characterset , accessed from web application with nls = ar8mswin1256 . DB2 , WE8ISO8859P1 characterset , accessed from web application with nls = WE8ISO8859P1. i want to consolidate the tw
-
Why do videos stop before reaching the end
Videos on You Tube have suddenly started to freeze after playing for 10-12 seconds. Is there a particular setting I should alter to correct this? Peter
-
Create a note in me21n by abap code
Hi experts, i'm wondering if it's possible to create a note by abap code ? I found this function module during my research "SO_WIND_NOTE_CREATE_API1", but i don't understand how to use it, and if it's helpful for my need. Thanks in advance for replie
-
Problem viewing files that were saved as Attachments using PSoft functions
Hello, I am trying to apply the code delivered in FILE_ATTACH_WRK to send an attachment to our server, and also to retrieve (view) the file. I am able to save the attachments and also to retrieve them for viewing. But something is happening to the fi