MAc Pro unable to detect the AE

I am using the TP-Link wireless router 108M which I am trying to join this network with my newly bought Airport Express. The AE is working fine with Green light showing and Airport Utility confirm it is normal. The only issue is that I cannot locate the AE network from the detected wireless network list. My current TP-link network is still shows as the selected network. Is this correct? Or it show show the Airport Express network device name given during the set up.
Anyone , pls help... Thank you

I am not sure if the AE network is connected.
As I said, if you configured the AirPort Express to "join" your wireless network, it is a client, just like a computer. The Express does not produce a wireless network, it's on the network that your router is producing. If the Express shows up in AirPort Utility when your computer is logged onto the TP Network, it has joined the network successfully.
Is it suppose to show the AE network that I must select and key in SSID password
No, the AirPort Express does not produce a wireless network when it is configured to join another network.
I connect the speaker to the AE and the menu bar is not show in the Itune
You'll connect the AirPort Express to +powered speakers+ (they must have amplifiers built in or you can use an outboard audio amplifier connected to regular speakers)

Similar Messages

Mac Pro - Unable to install SL on disks in Bays 3 & 4

After a debacle this morning, I reinstalled SL tonight after re-cloning the target disk from my Leopard boot drive. Booting from the DVD, I note that all 4 internal SATA drives have a GUID partition, and three boot Leopard just fine. The last 2 drive bays are not available for a SL install though - they had been a RAD volume, but I demoted both drives to get rid of the RAID. Each drive booted Leopard fine, but could not be used for the installation. Is thee some reason why I could not select them as the install target? There do seem to be issues with SL and RAID volumes in Mac Pro's, but once the drives wee demoted, I've have thought that would be irrelevant. Thanks for any ideas!

I'd already done that, being unable to think of anything else. I guess RAID is unreliable for now in SL.

Error while creating request list Unable to detect the SAP system directory

We are upgrading SAP BW (NW 7.0 EHP1) to SAP BW (NW 7.3)
source OS: Windows 2008 R2, source DB: MSSQL server 2008 R2 SP1 CU3
I had started the upgrade by running: STARTUP.BAT
I had started the DSUGui on the server (CI / DB on the same server) from: D:\usr\sap\BP1\upg\sdt\exe\DSUGui.bat
I ran both programs (run as administrators).
Once SAP Gui connects and was able to create userid/ password and when ready to start the initialization phase (click next)
gives me the error
Error while creating request list - see preceeding messages. Unable to detect the SAP system directory on the local host
I had tried STARTUP.BAT "jce_policy_zip=Z:\export-import\downloads\jce_policy-6' and still the same error.
I had started DSUGui.bat with trace and the trace file contents are
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[D:
usr
sap
bp1
upg
sdt
trc
server.trc]/>
<!PATTERN[server.trc]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:102) [Thread[ExecuteWorker,5,main]]: Execution of command com.sap.sdt.engine.core.communication.CmdActionEvent@376433e4 failed: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                          com.sap.sdt.engine.core.communication.AbstractCmd.log(AbstractCmd.java:103) [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
Jan 11, 2012 10:14:58 AM [Error]:                                                 com.sap.sdt.engine.core.communication.CmdActionEvent [Thread[ExecuteWorker,5,main]]: java.lang.NullPointerException: while trying to invoke the method java.io.File.getAbsolutePath() of an object returned from com.sap.sdt.dsu.service.req.DSURequestListBuilder.getSystemDir()
     at com.sap.sdt.dsu.service.req.DSURequestListBuilder.persistSystemInfo(DSURequestListBuilder.java:277)
     at com.sap.sdt.dsu.service.DSUService.createRequestList(DSUService.java:338)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionNext(DSUListener.java:144)
     at com.sap.sdt.dsu.service.controls.DSUListener.actionPerformed(DSUListener.java:67)
     at com.sap.sdt.server.core.controls.SDTActionListener$Listener.actionPerformed(SDTActionListener.java:46)
     at com.sap.sdt.engine.core.communication.CmdActionEvent.actOnEvent(CmdActionEvent.java:43)
     at com.sap.sdt.engine.core.communication.CmdEvent.execute(CmdEvent.java:69)
     at com.sap.sdt.engine.core.communication.ExecWorker.handleCmd(ExecWorker.java:36)
     at com.sap.sdt.engine.core.communication.AbstractWorker.run(AbstractWorker.java:93)
I could not get Upgrade started. Any help is appreciated
Thanks
Prathap

Did you get this solved?
I have the same problem

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

In Mail on macbook pro. unable to rename the mailboxes because the "rename mailbox" option is not highlighted

in Mail on macbook pro. unable to rename the mailboxes because the "rename mailbox" option is not highlighted.
Thanks Jim...........

Thank you SO much. Everything I had tried just expanded the size of each columns. Finding that slender area to the right of the message columns was tricky, but it worked. Wish that was more intuitive.
Thanks again.

How far is it possible to upgrade a Mac Pro mid-2010 to the maximum extract.

Hello
How far is it possible to upgrade a Mac Pro mid-2010 to the maximum performance. I would be interested how far one could come close to the performance of the new Mac Pro 2013, or is it hopeless.
My computer
Mac Pro
mid-2010
Processor 2 x 2.4 GHz Quad-Core Intel Xeon
Memory 14 GB 1066 MHz DDR3 ECC
Graphics Card ATI Radeon HD 5770 1024 MB
Software OS X 10.9.1 (13B42)
Please excuse my english is not the best because.

For what apps?
Okay, you have the slower 2.4GHz processors, most have found that MHz still rule and matter, meaning a 6-core 3.4GHz for some applications (most) was the best and the sweet spot.
So you could upgrade to a pair of 3.2GHz 4-core (cheapest) rather than splurge on two 6-core 3.34GHz (more expensive and more cores).
First thing to do, put the system on a 256GB Samsung 840 SSD.
For photoshop and graphics, invest in some more SSD ($US300 for 500GB) and put those on a PCIe SSD controller ($300 Sonnet Tempo Pro) and put Aperture/Lightroom on one, and use the 2nd SSD for scratch.
RAM: 24-32GB would probably help all but the more casusalist of user.
Tips and articles:
http://www.macperformanceguide.com head to the TOPICS main page and there are dozens of sections each a different area of upgrade and optimization for applications. Storage, memory, how to, use arrays, backup strategy.

HT1481 Unable to detect the shuffle ipod second generation in windows 8

Hi , I have been trying the connect apple shuffle ipod with windows 8 However I'm unable to connect .
I tried following troubleshooting steps.
Action :- Tried to reset the shuffle ipod
Result- Successfully able to reset the ipod But still unable to connect to windows 8
Action :- Tried to connect on other computer with same cable ( Windows7 )
Result :- It is working fine.
Action :-Tried to install the drivers from C:\Program files \Common files \ Drivers
Result :- Getting Yellow sign mark in device manager with error code Code 10 device cannot start .
Action :- Tried to delete the microsoft upper filter and lower filter
Result :- Successfully able to do that But unable to detect the ipod
Action :- Tried to install the latest version of i-tunes 11.1.5
Result :- Successfully able to do that .However there is no luck.
Action :- Tried to reboot the system . Perform the power cycle of the ipod and laptop
Result :-Unable to detect the ipod
Action :- Tried to change the different USB ports
Result :- Still unable to detect
Can you please suggest me few steps or how can i restore the apple ipod without i-tunes ?

Hello JimmyS,
The article linked below details a number of steps that can help get iTunes to recognize your iPod.
iPod not appearing in iTunes
http://support.apple.com/en-us/HT203449
Regards,
Allen

HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Hi,
I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

Typically this is caused by the internal list of compatible devices in the Mac being out of date. All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue. If that doesn't work, let me know.
I am a printer tech for HP.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Trying to update Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store starts the downloading, than stops. Error (102). Any idea what goes wrong? Thx

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

You just now installed 10.8.5? Did you purchase that at the app store?
What is the upgrade being offered?
FWIW, you are not running iOS on a Mac Pro (we are talking about the desktop tower Mac Pro, right?)

When watching my Apple TV (3rd gen) the picture jumps a few frame every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

When watching my Apple TV (3rd gen) the picture jumps a few frames every few seconds, this happens when I rent a film or play back from my new Mac Pro, my Wifi is the Airport Express.

These may be different issues, but lets look at rentals first.
Poor motion can result from mismatched output. If your source is 24 or 30 fps you should set the output of the Apple TV to 60 Hz, for 25 fps content use 50 Hz.
Additionally motion software on the TV itself can cause the picture to jump, check your TV settings and turn off any motion settings in use,

Can video cards for the new Mac Pro be installed in the field?

Current Configuration of the new Mac Pro is as follows:
ACES MacPro Workstation Seat
Processor
6-Core/3.5GHz/Xeon E5
Memory
32 GB
Graphics
2X AMD FirePro D500
Hard Disk
1 TB
Display
24" LED / HP
Media Player
2GB FIPS USB Drive
Mouse
Apple Magic Mouse
Keyboard
USB
Ports
4-USB 3.0;
6-Thunderbolt
1- HDMI
Netwk Interface
Ethernet/802.11n
Card Reader
NIST SP 800 Compliant
My question is can the Graphic Display cards be removed and replaced in the field by an experience Mac Technician?
Any special tools required?

Now here is the back, showing the heatsink paste still in place, and the thermal pads used to cool the RAM chips to the central cooler:
note that the two cards are not interchangeable -- they have their power lugs on opposite sides. One card has chips to support actual display output to the thunderbolt Busses, the other card has none, but has the custom micro-PCIE slot for the PCIe SSD "stick".
One reason for this design is that to make a leap forward, you would have to water-cool the slots for a traditional form-factor PCIe slot Mac pro. Then do it again to include a second GPU. In my opinion, this model Mac Pro is about conquering the cooling problem of this much CPU and GPU compute-power in one box.
NVIDIA graphics card replacements? maybe eventually, but not at this writing.

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform. The App Store shows there is an upgrade, so I click the download button. After about 2 hrs the process stops and an Error (102) appears on the screen. Any idea what goes wrong? THX

Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THX

ahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.

I replaced the battery on my RAID card, when I booted my mac pro up, I get the folder with the question mark. I used a boot USB drive to boot and when I looked in the RAID utility, my RAID 5 volumes were no longer showing, advise.
Ernest

Not sure if I'm following you. I have 4 hard drives installed on my Mac Pro. I had a RAID 5 configured and functional for about 5 months. My battery died on the RAID card. I replaced the battery, seated the RAID card back in the slot I removed it from. When I booted to the USB drive to look in the RAID utility, I could see the battery is charged but my volumes are not showing.
The drives don't show in disk Utility. I built the RAID with the RAID Utility and they did show there. I have a early 2008 Mac Pro, Mavricks OS running Mac Server

Hello . I hope to get a solution to my problem: ( I bought a laptop Mac Pro, a user But the seller was not the Secretary Laptop after arriving I've worked for almost an hour When connected to electricity Nour appears very faint, I do not see it quickly ht

Hello
. I hope to get a solution to my problem: (
I bought a laptop Mac Pro, a user
But the seller was not the Secretary :" ( !!
Laptop after arriving I've worked for almost an hour
* When connected to electricity
Nour appears very faint, I do not see it quickly
http://www.3rabart.com/up/download.php?img=38472
When separated from the energy, light shows intermittently and then disappears fast
http://www.3rabart.com/up/download.php?img=38473
I need urgent help please.
Thank you

Please ، How Email for a company ? I want to communicate with them about my problem "(

MAc Pro unable to detect the AE

Similar Messages

Maybe you are looking for