Mac Pro unable to read Digital Copy DVD's

I have a Mac Pro and have been trying to redeem some digital Copies that are included in DVD's. When I put the digital Copy disc into my drive, it spits it back out after about 30 secs. I've never had this prob before and it's only with these kinds of discs. Everything else works fine. I've also tried reading Digital Copy discs that I've already used without a problem and it won't read those now either. I've reset PRAM and all that. Does anyone have any ideas?

Welcome to Apple Discussions!
Check to see if this article can help you:
http://support.apple.com/kb/HT1539
If not, the Studio requires you to install some form of virtualization package*:
http://www.macmaps.com/macosxnative.html#WINTEL
in order to be able to use their software.
- * Links to my pages may give me compensation.

Similar Messages

Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives

Does anyone know when the Mac Pro switched from ATA to SATA DVD Drives ?
I tried to find this answer online but failed.

Appears the Mac Pro (Early 2008) is the last model to suggest Ultra ATA/100 optical.
And with an optional card, use Serial Attached SCSI via Mac Pro Raid.
This kind of information gets sketchy in that the hard drive bus and other parts are SATA
and only this (and earlier) model Mac Pro has optical drive interface w/ Ultra ATA/100. The
logic board on the early 2008 appears to have two Serial ATA ports, 3.0GBPS; so to check
these, you may need to look into specification in iFixit.com repair guides, any takeapart
guides, and note specifications in everymac.com and those from mactracker.ca.
The MacPro after Early 2008 model build series (Early 2009) appears to sport an optical
drive with 18x speed, compared to Early 2008 & before, whose drives indicate 16x spec.
Other changes may be indicated by certain parts and differences; processors, graphic
support, and those kinds of things. 2008 shows dual-core, afterward, quad-core.
So on what little I found, that would appear to be the divide or when optical drive spec
on the logic board changed from Ultra ATA/100 to SATA versions. But double check.
Good luck & happy computing!

Itunes won't play digital copy dvds

hey,
i just imported two digital copy dvd's that ship with some blu rays. so i entered the key, itunes copied the movie and afterwards it was in my movies library.
when i tried to play it, all i had was a black screen and no sound. the length of the movies was okay it was obviously playing, but no pic nor sound.
the file is in m4v format.
does anybody know how to fix this?
thank you

I recently bought UP by Disney Paxar with the digital copy. I just downloaded the digital copy but when I tried to play it itunes, there was no audio/video. The title screen will pop up along with the chapters, time, volume, etc. but there was just a grey screen playing nothing. I checked out these forums and found that there was a solution involving quicktime. The quicktime solution did not work so I kep on searching. There was a guy who said something about authorizing/deauthorizing the movie. I tried this out. I opened up itunes and ran the movie. Again, a blank grey screen appeard. I went up to the FILE navigation bar over at the top left hand corner of the screen and went to STORE over to the right. There I clicked on "deathorize computer". It asked me for my password and username, and i filled it out. After typing in my password, I tried playing the movie UP againg and it once againg asked me for my password t authorize my computer. After inserting my password the movie played and worked perfectly.

Mac pro won't read windows 7 install disc?

My 2007 mac pro won't read windows 7 install disc. My macbook reads the disc fine, so it is not a problem with the disc. It is 32-bit. The apple help line suggested firewire connecting the macbook to the macpro and starting the macbook in target disc mode, but other posts I have read have said that this will not solve the issue. Any suggestions?

Could be. I just rebooted and it read the disc. Unfortunately the windows install got interrupted and I had to reboot, and now it wont read the disc again. Is there any other way to install windows 7 to bootcamp, other than from the disc? Can I use FireWire and target disc my MacBook (the MacBook reads the disc just fine)?

HT201209 I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: you must insert your digital copy dvd in the computer in order to redeem this code" . The dvd is

I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.

Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

My mac pro no longer reads my moshi cardette

my mac pro no longer reads my moshi cardette, seems to have happened after the last two updates

Contact the vendor.

Mac Pro unable to mount etc. blank cd / dvd but reads cd's/DVD's with data

First ... sorry my bad English!
My Mac Pro is unable to mount blank cd's/dvd's but can read+mount cd's/dvd's with data??
It happends with my internal drive and with my Lacie external drive so it is not "hardware" problem.
I think this started after uppdates (security etc.)
I'm running Snow Leopard 10.6.4.
But still I'm able to burn with my Toast software cd's dvd's although cds are not mounted???or seen in finder???
-SsoundD

Start the program you are using to burn the discs, and when you are about to burn them, it will tell you to insert a blank CD/DVD to be burned.
Mac OS X cannot mount Blank CD/DVD, since it does not have any Mac File Structures on it.

$10,000 Mac Pro won't read $1,500 Apple Final Cut Pro DVDs. Awesome.

Have tried rebooting, updating, etc. No luck. DVD Drive just rejects the disk(s).
What does $11,500 get you from Apple? A boat anchor. Piece of crap won't read brand new Apple FCP disks, so the 60gb, 8 hour install either won't start at all, or fails about 80% of the way through. Just great.
Thing is, I also own some Macbook Pros, and the new one does the same thing.
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 13 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
Serial Number:
OPTIARC DVD RW AD-7170A:
Firmware Revision: 1.N8
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds

How about
"Guy with 10k Mac Pro and FCP can't find the right forum to post in?" Need a flashlight?
This is the iMac forum, there are forums for the Mac Pro
http://discussions.apple.com/category.jspa?categoryID=194
and for Final Cut Pro
http://discussions.apple.com/forum.jspa?forumID=939
Regards
TD

Mac Pro doesn't read DVDs, show them as blank DVDs.

I am running an older Mac Pro with OSX 10.6.8 software. I have been trying to play DVDs through my internal disk drives but everytime I insert them my mac shows them as blank dvds in the finder, even though they play on other machines. I do have an external disk drive set up as well that does read the disks just fine.
I have read through many different forms from different sites and have found similar issues but no solutions. I have tried updating, blowing out the drive with a can of compressed air, yet nothing makes a difference. At first I had thought that maybe the drive had gone bad, however this is happening to both internal drives at the same time and therefore makes me belive that it is a software issue.
As I said, my mac recognizes both drives (SONY DVD RW DW-D150A) but shows the disk as a blank disk with no data on it. I use my disk drives daily and have not done anything new that would have changed the software process.
Please comment if you have any solution. I have yet to find anything that remotely answers my questions. Thank you.

Hello
Maybe the upper and lower filters must be removed in Windows registry... Follow the instructions in this Microsoft article:
http://support.microsoft.com/kb/314060
And try to clean the ODD laser because it could be dirty.
Greets

My disc drive on Mac Pro will not read installation dvds

I have been trying to install some software on my Mac Pro - OS 10.8. It will not read the installation DVD. It acts like it is blank. I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!
Please help I payed a lot for this software and cant use it.

persyna wrote:
...I thought this was a faulty dics drive so I purchased a new one from OWC and installed it and it is doing the same thing!...
Since you're on your second optical drive, does the new one (and, for that matter the old one) read any optical disk? If it does, then there might still be something wrong with the disk from that manufacturer. If no disk is readable, I'd doublecheck the cabling to the drive. I'd also call OWC tech support. I've dealt with them for many years and they've always been very helpful with any problems.
As far as the software goes, you bought a license as well as an installer disk. Does the manufacturer have a website from which you could download a trial version of the software that could be converted to a full, operating version with the license key that should have come in the box with the disk?

My Mac Pro won't read any dvd-r discs

It reads regular dvd movies, and dvd +r fine. any suggestions? I'm running os 10.6.8 on a Quad care 2.8 gig machine. Thanks.

I had same issue with the Sony DW-D150A drive in my Mac Pro. Burned DVD with iDVD, then it would not read it. Based on looking at other threads on this, I tried the "Laser Lens Cleaner" from Target ($5.69).
Now it reads the DVD's burned with iDVD. However, it still has some issues with DVD +RW recorded by my DVD Recorder (Magnavox). My PC's and old G5 can read those fine, but they are not in the best shape (scratches).
I would definitely start with the Lens Cleaner.

Macbook Pro won't read SOME commercial DVD's

I found some people with similar issues, but no one with my exact problem, so I thought I would post it here.
I have a MacBook Pro that I got in November of 2007. Recently I noticed my drive stopped playing certain discs. I did some test and determined that it will play/write pretty much anything you throw at it except for some commercial DVD's. I actually brought it to the apple store and foolisly grabbed some dvd's at random, assuming that NONE would work. The one's I brought mounted just fine. Since I couldn't replicate the issue, I couldn't get much help. He said to try logging into a different user, I guess to determine if there was an issue with my Library. I tried that, it does the same thing regardless of the user.
Basically, some discs spin, and spin like the computer is struggling to read it, then it spits it out. Young Frankenstein and X-Men: The Last Stand, work fine. Children of Men doesn't (it used to work just fine).
I initially noticed the issue when trying to install the digital copies that came with my Back to the Future Trilogy boxed set. Back to the Future's digital copy disc mounts fine. The discs for Part II and Part III don't.
I doubt the drive is busted since so many discs work fine and it isn't ALL commercial discs that won't mount. Only some. My theory is that it's software related. Maybe something with reading certain encoding.
This is the second time I had this problem. The first time I read that verifying and repairing disc permissions would fix it, and it did....but now that doesn't do the trick.
It is consistent though. The same discs either work or don't work EVERY time. I thought maybe the lens needs cleaning. I read conflicting things about using lens cleaning discs in slot load drives so that's a last resort. But I imagine it wouldn't be so consistent if it was a dirty lens. Also, other players I've had with dirty lenses just skipped or had a disc read error of some sort. I don't get any errors. I also ran the Hardware Test on my OSX Install disc, which found no errors/issues. I wonder if it would have detected my drive as an error if it indeed was a hardware issue? Makes sense to me, but I'm not sure what the Hardware Test tests exactly, if the drive is included in that.
Any suggestions? I saw a thread from 2006 where someone suggested that deleting (Library/Preferences/com.apple.finder.plist) helped him, but I am really hesitant to delete an item from my Library. That just seems like asking for trouble and I'm not sure what my finder preferences have to do with my DVD's not mounting. Next I will probably try resetting my SMC. I'm not sure how that could help either, but it's a suggestions I've seen floating about and it's easy enough to do.
Here are some of my specs:
Macbook Pro, Intel Core2 Duo, 2.4 ghz
4gb Ram
Boot ROM Version:    MBP31.0070.B07
SMC Version (system):    1.16f11
MATSHITA DVD-R   UJ-857E:
Firmware Revision:    ZA0E
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    To show the available burn speeds, insert a disc and choose View > Refresh
Thanks. Sorry for the long and overly thurough post, but I thoguht that might help get me better help. Any input is greatly appreciated as it may save me the hour long trip back to the apple store.

I'm also having the same exact issues with some commercial DVDs and music CDs. It continues to read DVD-RWs but around two days ago it stopped reading commercially bought discs.
I've tested with brand new DVDs today (out of shrink wrap in pristine condition) all of which have the same region and have been tested on a DVD player, PS3, and another laptop without any glitches but only some of them played on my Macbook and the others would either spin for a bit and then ejected or it would read them as blank discs where the 'You inserted a blank DVD' message comes up.
I also tried testing older DVDs that used to play fine on my Macbook but only some of them mounted.
I then tried the following cleaning methods:
- Laser Lens Cleaner
- Compressed air
- Credit card with iPhone cleaning cloth
All of which failed to fix the problem so it's safe to assume this isn't a dust issue, the driver have also been very lightly used as I have only watched a handful of DVDs on it and written less than 10 DVD-RWs since I first purchased it in 2009.
My warranty has expired and replacing the drive would cost over $250 which I currently can't afford, therefore I plan to buy a cheaper external DVD burner but that is only a temporary workaround and I still hope for a solution other than replacing the driver.
Here's my info:
MacBook, Intel Core 2 Duo, 2 GHz
2 GB RAM
Boot ROM Version:    MB52.0088.B05
SMC Version (system):    1.38f5
MATSHITA DVD-R   UJ867A:
Firmware Revision:    KK08
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    Insert media and refresh to show available burn speeds

BRAND NEW Mac Pro won't boot from Leopard DVD, kernel panics!

I just received my brand new Mac Pro today. It's a BTO machine with the upgrade to the NVIDIA 8800GT, a second optical drive and a Mac OS X Server license. The system has Mac OS X server installed on the default 320GB drive. I decided to use the server license as a virtual machine running in Leopard client. So, I installed 2 new 500GB Seagate 7200.11 (Retail) drives in the machine, zeroed them out in prep for installing Leopard client.
At this point, I pop in a freshly-purchased retail copy of the Leopard DVD and restart. When I try to boot from the DVD and install Leopard to one of the new Seagate drives, I get kernel panics - need to restart the machine. Also tried booting from the Mac OS X Server DVD and this too only caused kernel panics. The DVD's read perfectly from within Mac OS X Server and boot from hard disks is flawless.
I spent an hour on the phone with a level 2 tech at Apple - Tried swapping out the RAM and moving around the DIMMS to no avail. I am at a loss to what this could be. Seems to be a hardware issue and the tech thought it was likely a problem with one of the memory risers but couldn't send replacements. Anyone else with a similar issue?
This is my first Mac and it looks like this Mac Pro is going back for an exchange and I'll have to wait yet another 10-12 days for a replacement to arrive. Bummer.
Am I missing something simple here? Does this seem to be a hardware issue?
If anyone has any ideas before I ship this one back, please write!!!

New Mac Pros will not install the Leopard retail disc. They will only install the Leopard disc which shipped with them labeled Mac Pro. That has always been true. Macs can only boot the system that ships on DVD in the box that came with them, and newer retail releases. They can never boot from an older retail release than what shipped in the box.

Mac Pro - Unable to install SL on disks in Bays 3 & 4

After a debacle this morning, I reinstalled SL tonight after re-cloning the target disk from my Leopard boot drive. Booting from the DVD, I note that all 4 internal SATA drives have a GUID partition, and three boot Leopard just fine. The last 2 drive bays are not available for a SL install though - they had been a RAD volume, but I demoted both drives to get rid of the RAID. Each drive booted Leopard fine, but could not be used for the installation. Is thee some reason why I could not select them as the install target? There do seem to be issues with SL and RAID volumes in Mac Pro's, but once the drives wee demoted, I've have thought that would be irrelevant. Thanks for any ideas!

I'd already done that, being unable to think of anything else. I guess RAID is unreliable for now in SL.

Mac Pro 8-Core 3 GHz: Instability / DVD Superdrive / Airport problematic.

I am the new proud owner of one of the 8-Core Mac Pro machines. I have had numerous problems with it however.
1) The DVD/CD Superduper Drive: I've searched the discussions but it seems that the problem I am having may be specific to me. The drive will not read any DVD-R media that I burned. It does read CD, CD-R, DVD movies.
2) Instability: This machine seems to crash a lot. I use Combustion often and it seems to crash any time I get near the 3GB memory ceiling that I have. It also crashes whenever it doesn't find a path that no longer exists. Additionally it fails to startup whenever the iPod is plugged into a USB port. Also it sometimes won't boot up for no reason and I have power cycle the machine completely. That part is more rare.
3) Airport: I purchased the machine from a retailer other than Apple and it appears that the Airport Extreme card (M8881LL/A) does not work with this machine. Can someone explain what hardware I need to get here? Is there a part number?
So if any of you have the 8-Core Mac Pro feel free to chime in and let me know if you've had any of these experiences. Also I did put extra Edge memory (2GB) in this box. Is it possible that its instability is related to the extra RAM? Thanks in advance for your advice.
Mac Pro 8-Core 3GHz Mac OS X (10.4.10) 3GB RAM/ 250GB HD/ ATI 7300 GT

Ah good point - I hadn't thought of that. Well I'm not seeing anything too specific that tells me what's causing the crashes.
I may just pull the new RAM that I installed and see if that changes things any.
Here's what I found in both the console log and the combustion crash log:
Console.Log
/p4Local/branches/xcode/oxygene/macproject/../source/route.c:120: failed assertion `!List_Empty(&op->ParentList)'
Jul 1 12:17:08 8-CORE-COMPUTER crashdump[269]: Combustion crashed
Jul 1 12:17:09 8-CORE-COMPUTER crashdump[269]: crash report written to: /Users/edeinzer/Library/Logs/CrashReporter/Combustion.crash.log
Jul 1 13:01:54 8-CORE-COMPUTER crashdump[298]: Combustion crashed
Jul 1 13:01:55 8-CORE-COMPUTER crashdump[298]: crash report written to: /Users/edeinzer/Library/Logs/CrashReporter/Combustion.crash.log
Combustion.crash.log
Host Name: 8-CORE-COMPUTER
Date/Time: 2007-07-01 12:17:06.864 -0700
OS Version: 10.4.10 (Build 8R2218)
Report Version: 4
Command: Combustion
Path: /Applications/Combustion 4/Combustion.app/Contents/MacOS/Combustion
Parent: WindowServer [57]
Version: 4.0.5.5031 (???)
PID: 259
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x000007c7
Thread 0 Crashed:
0 XPLib.dylib 0x0022b227 NewActivePalette(XPWindow*, XPPalette*, long, long, long) + 319
1 XPLib.dylib 0x0022db58 DisplayPaletteXP(TagItem*) + 8008
2 Oxygene.dylib 0x01891554 OXViewPalette::Show(long) + 380
3 Footage.oxp 0x173f6c27 FootageOperator::ShowUI(OXRouteDesc*) + 387
4 Oxygene.dylib 0x01882fbd OXViewManager::SetCurrentOperator(OXRouteDesc*, ChannelHeader*) + 1217
5 Oxygene.dylib 0x01acd4cd WSListPalette::EventHandler(XPEvent*) + 439
6 XPLib.dylib 0x0031bb8c XPCPalette::RoutineCallback(XPEvent*) + 240
7 XPLib.dylib 0x0021b29c Do_Event(unsigned short, unsigned long) + 570
8 XPLib.dylib 0x002ce5bf Do_CustomEvent(XPCustomEvent*) + 333
9 XPLib.dylib 0x002e484e CustomGadMouseDown(XPWindow*, Point, EventRecord*, long) + 388
10 XPLib.dylib 0x002d5344 AppEventHandlerXP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 7502
11 com.apple.HIToolbox 0x92deb537 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 1093
12 com.apple.HIToolbox 0x92deabdc SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
13 com.apple.HIToolbox 0x92df1fbc SendEventToEventTarget + 56
14 com.apple.HIToolbox 0x92df244f ToolboxEventDispatcherHandler(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*) + 1169
15 com.apple.HIToolbox 0x92deb8ee DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2044
16 com.apple.HIToolbox 0x92deabdc SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 304
17 com.apple.HIToolbox 0x92df1fbc SendEventToEventTarget + 56
18 com.apple.HIToolbox 0x92e35eb3 ToolboxEventDispatcher + 81
19 com.apple.HIToolbox 0x92e348cb RunApplicationEventLoop + 165
20 XPLib.dylib 0x002cf2c0 HandleGUIXP() + 308
21 XPLib.dylib 0x003182cb XPCApplication::PumpMessages() + 11
22 XPLib.dylib 0x0031a507 XPCApplication::Run(long) + 129
23 com.autodesk.combustion 0x00003694 main + 2308
24 com.autodesk.combustion 0x0000270a _start + 228 (crt.c:272)
25 com.autodesk.combustion 0x00002625 start + 41
Thread 1:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 2:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 3:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 4:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 5:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 6:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 7:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 8:
0 libSystem.B.dylib 0x901101bf semaphoretimedwaittrap + 7
1 XPLib.dylib 0x00316a61 WaitSemaphoreXP(unsigned long) + 31
2 XPLib.dylib 0x00316cec TaskFunc(TaskParams*) + 48
3 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 9:
0 libSystem.B.dylib 0x900248c7 semaphorewait_signaltrap + 7
1 ...ple.CoreServices.CarbonCore 0x90d1d970 MPWaitForEvent + 221
2 XPLib.dylib 0x0032b6d8 XPCEvent::WaitForMultiple(XPCEvent**, unsigned long, unsigned long) + 40
3 Oxygene.dylib 0x01a72335 OXScriptEngine::WorkProc() + 63
4 XPLib.dylib 0x0032c476 XPCThread::ThreadEntry(void*) + 60
5 ...ple.CoreServices.CarbonCore 0x90cb8c6c PrivateMPEntryPoint + 51
6 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 10:
0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9083e188 CFRunLoopRun + 60
3 com.apple.DVCPROHDMuxer 0x1747c507 AVS::DestroyAVCDeviceController(AVS::AVCDeviceController*) + 285
4 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 11:
0 libSystem.B.dylib 0x90009cd7 machmsgtrap + 7
1 com.apple.CoreFoundation 0x9082d2b3 CFRunLoopRunSpecific + 2014
2 com.apple.CoreFoundation 0x9082cace CFRunLoopRunInMode + 61
3 com.apple.audio.CoreAudio 0x9146841e HALRunLoop::OwnThread(void*) + 158
4 com.apple.audio.CoreAudio 0x91468239 CAPThread::Entry(CAPThread*) + 93
5 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 12:
0 libSystem.B.dylib 0x90047dd7 semaphoretimedwait_signaltrap + 7
1 ...ple.CoreServices.CarbonCore 0x90ce1da9 TSWaitOnSemaphoreCommon + 163
2 ...ple.CoreServices.CarbonCore 0x90ce8d91 TimerThread + 87
3 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 13:
0 libSystem.B.dylib 0x90047dd7 semaphoretimedwait_signaltrap + 7
1 ...ple.CoreServices.CarbonCore 0x90ce1da9 TSWaitOnSemaphoreCommon + 163
2 ...ickTimeComponents.component 0x97f9c18a ReadSchedulerThreadEntryPoint + 4895
3 libSystem.B.dylib 0x90024227 pthreadbody + 84
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x0022b0f6 ecx: 0x00000000 edx: 0x000007c7
edi: 0x17005c40 esi: 0x1cc59094 ebp: 0xbfffd048 esp: 0xbfffcff0
ss: 0x0000001f efl: 0x00010246 eip: 0x0022b227 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037

Mac Pro unable to read Digital Copy DVD's

Similar Messages

Maybe you are looking for