Mac Pro unresponsive - excessively long boot time

Got a Mac Pro that started glitching up this morning. suddenly started getting intermittent freezes / beach balls, soon became mostly unresponsive.
Did a deep clean w/ applejack (passed disk check), reset PRAM, unplugged for 20 sec to reset pmu, etc.
When I restarted in safe mode again, it hung half way thru.  Restarted again normally and just let it alone. It did finally boot up - but took a half hour or longer.
Navigating windows, mounting network shares, file copies, basic things - all excruciatingly slow.
Failing hard drive?
Anything else to try?
How can i get the tray to eject to boot from DVD in case it wont fully boot again?

Failing hard drive?
Either that or some other hardware fault.
Anything else to try?
Check SMART status in Disk Utility, run Apple Hardware Test -- both unreliable. Take it to an Apple Store for testing.

Similar Messages

  • Mac Pro / Cinema Display slow boot time

    Hi there,
    I have a late 2008 Mac Pro, running OSX 10.6.8 and it is connected to a 23" Apple Cinema Display.
    A couple of days ago I noticed that when I switched the Mac on, the display would not turn on.
    I forced it to shut down by holding the power button, and tried again, but nothing.
    Today I switched it on, and again the display did not turn on, but I left it like that, and after about 25 minutes it turned on.
    I shut it down from finder, and switched it back on and it worked instantly.
    I used Disk Utility to clean up my disk, but I can't run a Disk Utility or Hardware Test from the CD, as the optical drive has not been working well for a few years.
    I am guessing that it may be the display needing a while to "warm up" so it is dying, or that it might be a RAM issue that after the first long boot resolves itself.
    Any thoughts as to how I should look into this more?
    Thanks!!

    I used Disk Utility to clean up my disk, but I can't run a Disk Utility or Hardware Test from the CD, as the optical drive has not been working well for a few years.
    Never use DVDs myself, definitely not for repairs.
    Install OS X or clone the drive and have a 2nd bootable backup.
    CCC can check files with checkum for integrity during copy (have to go into advanced options for copy operation).
    Always have even a small boot drive handy. Even a flash drive can serve your purposes.
    DU checks the directory. You don't clean up, not with DU and not with 3rd party "cleaner" apps.
    You can do a Safe Boot, or try, and even run fsck -fy in Single User Mode in a pinch - the Safe Boot though you should try.
    I would suspect the GPU. Beyond that, just 2008-itis that affects these 3,1 models more than any other. And yes SMC and NVRAM reset and remove all devices. Even slide out the disk drives and anything else. And press the power on button for 10 seconds while unplugged, to fully reset. NRAM is done from cold boot and the old 4-finger salute of P+R+CMD+OPT keys.

  • MacBook pro Extremely long booting time After 10.10.1 + strange icons when booting

    Hi all,
    since the Yosemite update and the sequential patch, I've been experiencing lots and lots of issues with this releade
    I posses a
    MacBook Pro (13-inch, Mid 2012)
    2,5 GHz Intel Core i5
    After a week after the Yosemite update my Mac just froze, and for a couple of days I was unable to access it. after 4 attempts of Clean install i was finally able to restore it. but the issue with long booting time and free after sleep/wake action are the same .
    I'm experiencing strange icons during boot as follows:
    Only after a second reboot and clearing ram with Cmd+Alt+P+R i'm able to get rid of this , and the reboot shows this
    That after 5 mins changes into this
    This routine keeps happening, every single time i have to restart my mac.
    Any suggestions?
    tnks

    Well , i guess i a HDD issue, when i was experiencing the initial issues with yosemite , I've installed the system an external Hdd and everything was working fine.
    So i guess my suspicions were correct. I have to change my hdd.

  • My mac pro 13 takes longer than normal to start?

    My mac pro 13 takes longer than normal to start. What do I need to do to speed up the start up process?

    with "normal" are you comparing it to other MacBooks? or to your model in the past?
    installing a SSD would increase the boot up time a lot if you don't have one already...
    also check what apps you have set to automatically open on startup because some/a lot will slow the startup down

  • Mac Pro Unusually Slow to Boot

    Recently my Mac Pro takes unusally long to boot. In fact, after the bong, it takes about 45 seconds to a full minutes just to show the boot screen (Apple Logo and Spinner). Not sure if there was a recent firmware update or something that would affect it in this way, but it just sorta came out of nowhere about a month ago. The overall performance of the machine seems fine, but that slow boot has me worried...especially since AppleCare on my machine is about to expire. The specs of my machine are below.
    Mac Pro (Mid-2010)
    Quad-Core 3.2Ghz Intel Xeon "Nehalem"
    10GB 1066MHz ECC SDRAM (2x 4GB OWC RAM, 2x 1GB Apple RAM)
    240GB OCZ Vertex 3 SATA II SSD
    4x 1TB Western Digital HDDs
    ATI Radeon HD 5770 with 1GB of GDDR5 Memory PCI Express 2.0
    OS X Mavericks 10.9.2
    If you need any other details, please feel free to ask and any advice would be greatly appreciated,
    Thanks!

    Sometimes it can be helpful to turn on Verbose Mode (or hold down Command- V at Startup) this will scroll a whole lot of deterministic nonsense as it starts up. If it stalls at a certain stage, you can investigate further.
    This same list of stuff is available in a log and can be read out with Console.app, from the Utilities folder insdie the Applications folder.
    You will want to note the time of a Startup, then look for the words "BOOT TIME" in caps, and follow along to see what was happening.

  • Mac Pro 2009 won't boot after airport installation

    Hey everyone, looking for some insight here.
    I recently bought a Mac Pro 2009 running Mavericks (at time of receipt). It didn't come with an airport card so I purchased one to install myself. The Mac was running fine until this evening when I finally got around to installing the card, however since then it won't get past the grey boot screen with apple logo. I've tried disconnecting the airport card to see if that reverted it, but no change. I also can't boot into safe mode, so that's no good. The only thing I can do is bring up the giant padlock with the option key held, which I saw elsewhere was connected with a firmware password (my admin doesn't work).
    Any advice here would be greatly appreciated. Thanks!

    It wouldn't be much of a lock if you could circumvent it with advice from a forum.
    Obviously a valid point, although possibly somewhat niaive where forums are concerned (no disrespect intended).
    It was more an expression of frustration than anything else, to be honest, though. It's kind of absurd that this happened following a simple hardware upgrade. Most people I know aren't even aware they can set a firmware password, so basically what it means is don't upgrade a machine that's intented to be upgraded (I'm aware of the hyperbole here).
    Looks like it will be a Mac store trip, though, yes. A pain in the arse since even my nearest authorised technician is miles away.

  • I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

    Hi, I have an early 2008 Mac Pro which has re-booting problems.
    Processor speed is: 2.8
    Memory: 2GB 800 MHz DDR2 FB-DIMM
    2 x 28GHz Quad Core Intel Xeon
    I am running OSX Yosemite Version 10.10
    My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
    I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
    This worked for a few days and then the same problem started again.
    I am beginning to wonder if I need to buy a new hard drive.
    If there is anyone who has some answers to help me solve my problem, I would be most grateful.
    Robert

    When you have the beachball activity, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My 2008 Mac Pro is no longer recognizing memory in the B card. Is it simply a defective card or should I look elsewhere for an answer.

    My 2008 Mac Pro is no longer recognizing memory in the B card. Is it simply a defective card or should I look elsewhere for an answer? It was working unntil sometime early this year. Thank you for any enlightenment you can provide.

    I'm not sure I understand. You swapped the A and B modules. The B module does not show up in the A modules slot? That would indicate the module is bad. If the A module doesn't show up in the B module's slot, then the slot is bad.

  • [Systemd] Very long boot time

    I have a very long boot time with my Arch.
    Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms
    Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper.  Does anyone has a suggestion how to fix that?
    Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux
    systemd-analzye blame shows
    18722ms colord.service
    16584ms home.mount
    12666ms plymouth-start.service
    11550ms boot.mount
    11350ms var.mount
    7604ms NetworkManager.service
    7261ms chrony.service
    1985ms wpa_supplicant.service
    1606ms systemd-modules-load.service
    1350ms systemd-tmpfiles-setup.service
    1202ms dev-hugepages.mount
    1189ms dev-mqueue.mount
    1080ms sys-kernel-debug.mount
    987ms systemd-udev-trigger.service
    946ms systemd-udevd.service
    879ms systemd-vconsole-setup.service
    495ms bluetooth.service
    376ms polkit.service
    358ms crashplan.service
    348ms systemd-readahead-replay.service
    346ms lm_sensors.service
    337ms upower.service
    331ms systemd-readahead-collect.service
    311ms systemd-logind.service
    289ms lvmetad.service
    286ms systemd-binfmt.service
    242ms cpupower.service
    206ms systemd-remount-fs.service
    174ms gdm.service
    140ms proc-sys-fs-binfmt_misc.mount
    94ms udisks2.service
    93ms rtkit-daemon.service
    87ms rc-local.service
    86ms systemd-user-sessions.service
    53ms systemd-sysctl.service
    24ms accounts-daemon.service
    2ms tmp.mount
    1ms sys-fs-fuse-connections.mount
    Dmesg shows:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-D3FFF write-through
    [ 0.000000] D4000-D7FFF uncachable
    [ 0.000000] D8000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FE0000000 write-back
    [ 0.000000] 6 base 220000000 mask FF0000000 write-back
    [ 0.000000] 7 base 230000000 mask FF8000000 write-back
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
    [ 0.000000] [mem 0x00000000-0xc77fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
    [ 0.000000] [mem 0x100000000-0x237ffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
    [ 0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
    [ 0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
    [ 0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel CALPELLA 06040000 INTL 20060912)
    [ 0.000000] ACPI: FACS 00000000c779bfc0 00040
    [ 0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL QA09 06040000 LTP 00000000)
    [ 0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    [ 0.000000] NODE_DATA [mem 0x237ffc000-0x237ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x237ffffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc727bfff]
    [ 0.000000] node 0: [mem 0xc7282000-0xc73ebfff]
    [ 0.000000] node 0: [mem 0xc740f000-0xc746efff]
    [ 0.000000] node 0: [mem 0xc770f000-0xc7717fff]
    [ 0.000000] node 0: [mem 0xc771f000-0xc7770fff]
    [ 0.000000] node 0: [mem 0xc779f000-0xc77e1fff]
    [ 0.000000] node 0: [mem 0xc77ff000-0xc77fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x237ffffff]
    [ 0.000000] On node 0 totalpages: 2094193
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 795941 pages, LIFO batch:31
    [ 0.000000] Normal zone: 19968 pages used for memmap
    [ 0.000000] Normal zone: 1257984 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
    [ 0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
    [ 0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
    [ 0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
    [ 0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
    [ 0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
    [ 0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
    [ 0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
    [ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
    [ 0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
    [ 0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2057835
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.068 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000044] Security Framework initialized
    [ 0.000048] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003923] Mount-cache hash table entries: 256
    [ 0.004173] Initializing cgroup subsys cpuacct
    [ 0.004176] Initializing cgroup subsys memory
    [ 0.004184] Initializing cgroup subsys devices
    [ 0.004186] Initializing cgroup subsys freezer
    [ 0.004188] Initializing cgroup subsys net_cls
    [ 0.004189] Initializing cgroup subsys blkio
    [ 0.004216] CPU: Physical Processor ID: 0
    [ 0.004217] CPU: Processor Core ID: 0
    [ 0.004222] mce: CPU supports 9 MCE banks
    [ 0.004234] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004241] process: using mwait in idle threads
    [ 0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x6
    [ 0.005569] ACPI: Core revision 20120711
    [ 0.021739] ftrace: allocating 18347 entries in 72 pages
    [ 0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05
    [ 0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
    [ 0.172658] perf_event_intel: CPU erratum AAJ80 worked around
    [ 0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
    [ 0.172661] ... version: 3
    [ 0.172662] ... bit width: 48
    [ 0.172663] ... generic registers: 4
    [ 0.172665] ... value mask: 0000ffffffffffff
    [ 0.172666] ... max period: 000000007fffffff
    [ 0.172667] ... fixed-purpose events: 3
    [ 0.172669] ... event mask: 000000070000000f
    [ 0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.212646] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    [ 0.379170] Brought up 8 CPUs
    [ 0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
    [ 0.385494] devtmpfs: initialized
    [ 0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
    [ 0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
    [ 0.388860] NET: Registered protocol family 16
    [ 0.389041] ACPI: bus type pci registered
    [ 0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.432597] PCI: Using configuration type 1 for base access
    [ 0.433425] bio: create slab <bio-0> at 0
    [ 0.433488] ACPI: Added _OSI(Module Device)
    [ 0.433490] ACPI: Added _OSI(Processor Device)
    [ 0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.433493] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.435530] ACPI: EC: Look up EC in DSDT
    [ 0.437476] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444142] ACPI: Dynamic OEM Table Load:
    [ 0.444145] ACPI: SSDT (null) 002E8 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
    [ 0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.444806] ACPI: Dynamic OEM Table Load:
    [ 0.444809] ACPI: SSDT (null) 008B0 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
    [ 0.445201] ACPI: SSDT 00000000c771a718 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445749] ACPI: Dynamic OEM Table Load:
    [ 0.445753] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
    [ 0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.446432] ACPI: Dynamic OEM Table Load:
    [ 0.446435] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
    [ 0.448062] ACPI: Interpreter enabled
    [ 0.448066] ACPI: (supports S0 S3 S4 S5)
    [ 0.448089] ACPI: Using IOAPIC for interrupt routing
    [ 0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.455392] ACPI: Power Resource [FN00] (off)
    [ 0.455494] ACPI: Power Resource [FN01] (off)
    [ 0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.456339] ACPI: No dock devices found.
    [ 0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.456813] \_SB_.PCI0:_OSC invalid UUID
    [ 0.456815] _OSC request data:1 8 1f
    [ 0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.457600] PCI host bridge to bus 0000:00
    [ 0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
    [ 0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.457610] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.457612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
    [ 0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
    [ 0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
    [ 0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    [ 0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
    [ 0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
    [ 0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
    [ 0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
    [ 0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
    [ 0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
    [ 0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
    [ 0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
    [ 0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
    [ 0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
    [ 0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
    [ 0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
    [ 0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
    [ 0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
    [ 0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
    [ 0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
    [ 0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
    [ 0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
    [ 0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
    [ 0.459313] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
    [ 0.459322] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
    [ 0.459331] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
    [ 0.459340] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
    [ 0.459350] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
    [ 0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
    [ 0.459410] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
    [ 0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
    [ 0.459469] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
    [ 0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
    [ 0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
    [ 0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.459568] pci 0000:02:00.0: reg 14: [io 0x2000-0x20ff]
    [ 0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
    [ 0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.459642] pci 0000:02:00.0: supports D1 D2
    [ 0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
    [ 0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
    [ 0.459749] pci 0000:02:00.1: supports D1 D2
    [ 0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.469045] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.469052] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.469061] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
    [ 0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.469126] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.469130] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.469137] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
    [ 0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
    [ 0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
    [ 0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.470317] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.470322] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.470329] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
    [ 0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.470380] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.470384] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.470391] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
    [ 0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
    [ 0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
    [ 0.470612] pci 0000:09:00.0: supports D1 D2
    [ 0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
    [ 0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
    [ 0.470817] pci 0000:09:00.1: supports D1 D2
    [ 0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
    [ 0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
    [ 0.471016] pci 0000:09:00.2: supports D1 D2
    [ 0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
    [ 0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
    [ 0.471214] pci 0000:09:00.3: supports D1 D2
    [ 0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.479060] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.479067] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.479077] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
    [ 0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
    [ 0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
    [ 0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
    [ 0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.479589] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
    [ 0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
    [ 0.479675] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.479677] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.479680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.479682] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.479685] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.479687] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.479690] pci 0000:00:1e.0: bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
    [ 0.479692] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.480435] \_SB_.PCI0:_OSC invalid UUID
    [ 0.480437] _OSC request data:1 1f 1f
    [ 0.480441] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.480443] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
    [ 0.487507] PCI host bridge to bus 0000:ff
    [ 0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
    [ 0.487513] pci_bus 0000:ff: root bus resource [bus ff]
    [ 0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
    [ 0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
    [ 0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
    [ 0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
    [ 0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
    [ 0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
    [ 0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
    [ 0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
    [ 0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
    [ 0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
    [ 0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
    [ 0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
    [ 0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
    [ 0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
    [ 0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
    [ 0.487895] pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.487897] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.488983] vgaarb: loaded
    [ 0.488985] vgaarb: bridge control possible 0000:02:00.0
    [ 0.489035] PCI: Using ACPI for IRQ routing
    [ 0.495825] PCI: pci_cache_line_size set to 64 bytes
    [ 0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
    [ 0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
    [ 0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
    [ 0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
    [ 0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
    [ 0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
    [ 0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
    [ 0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
    [ 0.496267] NetLabel: Initializing
    [ 0.496269] NetLabel: domain hash size = 128
    [ 0.496270] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.496283] NetLabel: unlabeled traffic allowed by default
    [ 0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
    [ 0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
    [ 0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.499146] hpet: hpet2 irq 40 for MSI
    [ 0.502434] hpet: hpet3 irq 41 for MSI
    [ 0.505694] hpet: hpet4 irq 42 for MSI
    [ 0.505793] hpet: hpet5 irq 43 for MSI
    [ 0.509214] hpet: hpet6 irq 44 for MSI
    [ 0.522618] Switching to clocksource hpet
    [ 0.529334] pnp: PnP ACPI init
    [ 0.529354] ACPI: bus type pnp registered
    [ 0.529782] pnp 00:00: [bus 00-fe]
    [ 0.529786] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.529789] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.529791] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
    [ 0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.529952] pnp 00:01: [io 0x0000-0x001f]
    [ 0.529954] pnp 00:01: [io 0x0081-0x0091]
    [ 0.529957] pnp 00:01: [io 0x0093-0x009f]
    [ 0.529959] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.529961] pnp 00:01: [dma 4]
    [ 0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.530116] pnp 00:03: [irq 0 disabled]
    [ 0.530125] pnp 00:03: [irq 8]
    [ 0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.530174] pnp 00:04: [io 0x00f0]
    [ 0.530181] pnp 00:04: [irq 13]
    [ 0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.530221] pnp 00:05: [io 0x002e-0x002f]
    [ 0.530223] pnp 00:05: [io 0x004e-0x004f]
    [ 0.530225] pnp 00:05: [io 0x0061]
    [ 0.530227] pnp 00:05: [io 0x0063]
    [ 0.530229] pnp 00:05: [io 0x0065]
    [ 0.530231] pnp 00:05: [io 0x0067]
    [ 0.530234] pnp 00:05: [io 0x0068]
    [ 0.530236] pnp 00:05: [io 0x006c]
    [ 0.530238] pnp 00:05: [io 0x0070]
    [ 0.530240] pnp 00:05: [io 0x0080]
    [ 0.530242] pnp 00:05: [io 0x0092]
    [ 0.530244] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.530246] pnp 00:05: [io 0x0680-0x069f]
    [ 0.530249] pnp 00:05: [io 0x0500-0x050f]
    [ 0.530251] pnp 00:05: [io 0xffff]
    [ 0.530253] pnp 00:05: [io 0xffff]
    [ 0.530255] pnp 00:05: [io 0x0400-0x047f]
    [ 0.530257] pnp 00:05: [io 0x1180-0x11ff]
    [ 0.530259] pnp 00:05: [io 0x164e-0x164f]
    [ 0.530262] pnp 00:05: [io 0xfe00]
    [ 0.530330] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.530333] system 00:05: [io 0x0500-0x050f] has been reserved
    [ 0.530336] system 00:05: [io 0xffff] has been reserved
    [ 0.530339] system 00:05: [io 0xffff] has been reserved
    [ 0.530342] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.530345] system 00:05: [io 0x1180-0x11ff] has been reserved
    [ 0.530347] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.530352] system 00:05: [io 0xfe00] has been reserved
    [ 0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.530374] pnp 00:06: [io 0x0300-0x0307]
    [ 0.530381] pnp 00:06: [irq 10]
    [ 0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
    [ 0.530445] pnp 00:07: [io 0x0070-0x0077]
    [ 0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.530488] pnp 00:08: [io 0x0060]
    [ 0.530492] pnp 00:08: [io 0x0064]
    [ 0.530499] pnp 00:08: [irq 1]
    [ 0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.530539] pnp 00:09: [irq 12]
    [ 0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
    [ 0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
    [ 0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
    [ 0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
    [ 0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
    [ 0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
    [ 0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
    [ 0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
    [ 0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
    [ 0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
    [ 0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
    [ 0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
    [ 0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
    [ 0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
    [ 0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
    [ 0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.532133] pnp 00:0b: [bus ff]
    [ 0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.532211] pnp: PnP ACPI: found 12 devices
    [ 0.532212] ACPI: ACPI bus type pnp unregistered
    [ 0.539150] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
    [ 0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
    [ 0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.539172] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539182] pci 0000:00:1c.5: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
    [ 0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
    [ 0.539193] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
    [ 0.539198] pci 0000:00:03.0: bridge window [mem 0xcfe00000-0xcfefffff]
    [ 0.539202] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
    [ 0.539211] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.539217] pci 0000:00:1c.0: bridge window [mem 0xf0800000-0xf08fffff]
    [ 0.539221] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
    [ 0.539232] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.539237] pci 0000:00:1c.1: bridge window [mem 0xf0900000-0xf09fffff]
    [ 0.539241] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
    [ 0.539252] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    [ 0.539257] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf0afffff]
    [ 0.539262] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
    [ 0.539273] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff]
    [ 0.539278] pci 0000:00:1c.4: bridge window [mem 0xf0b00000-0xf0cfffff]
    [ 0.539283] pci 0000:00:1c.4: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
    [ 0.539293] pci 0000:00:1c.5: bridge window [io 0x7000-0x7fff]
    [ 0.539299] pci 0000:00:1c.5: bridge window [mem 0xf0d00000-0xf0dfffff]
    [ 0.539304] pci 0000:00:1c.5: bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
    [ 0.539366] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.539371] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539373] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539401] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
    [ 0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.539408] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    [ 0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
    [ 0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    [ 0.539416] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    [ 0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
    [ 0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
    [ 0.539423] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
    [ 0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
    [ 0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
    [ 0.539430] pci_bus 0000:09: resource 0 [io 0x6000-0x6fff]
    [ 0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
    [ 0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 0.539438] pci_bus 0000:0b: resource 0 [io 0x7000-0x7fff]
    [ 0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
    [ 0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
    [ 0.539445] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
    [ 0.539448] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
    [ 0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
    [ 0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.539501] NET: Registered protocol family 2
    [ 0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.544173] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.544194] TCP: reno registered
    [ 0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.544454] NET: Registered protocol family 1
    [ 0.544593] pci 0000:02:00.0: Boot video device
    [ 0.544817] PCI: CLS 64 bytes, default 64
    [ 0.544861] Unpacking initramfs...
    [ 0.665886] Freeing initrd memory: 4640k freed
    [ 0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
    [ 0.666654] Simple Boot Flag at 0x36 set to 0x80
    [ 0.667182] audit: initializing netlink socket (disabled)
    [ 0.667193] type=2000 audit(1352749565.703:1): initialized
    [ 0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.685360] VFS: Disk quotas dquot_6.5.2
    [ 0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.685575] msgmni has been set to 15952
    [ 0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.685830] io scheduler noop registered
    [ 0.685832] io scheduler deadline registered
    [ 0.685897] io scheduler cfq registered (default)
    [ 0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [ 0.686339] vesafb: scrolling: redraw
    [ 0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
    [ 0.886729] Console: switching to colour frame buffer device 160x64
    [ 1.086123] fb0: VESA VGA frame buffer device
    [ 1.086134] intel_idle: MWAIT substates: 0x1120
    [ 1.086145] intel_idle: v0.4 model 0x1E
    [ 1.086146] intel_idle: lapic_timer_reliable_states 0x2
    [ 1.086221] GHES: HEST is not enabled!
    [ 1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.086787] Linux agpgart interface v0.103
    [ 1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.097348] mousedev: PS/2 mouse device common for all mice
    [ 1.097573] rtc_cmos 00:07: RTC can wake from S4
    [ 1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.098264] cpuidle: using governor ladder
    [ 1.098473] cpuidle: using governor menu
    [ 1.098603] drop_monitor: Initializing network drop monitor service
    [ 1.098697] TCP: cubic registered
    [ 1.098819] NET: Registered protocol family 10
    [ 1.099011] NET: Registered protocol family 17
    [ 1.099028] Key type dns_resolver registered
    [ 1.099438] PM: Hibernation image not present or could not be loaded.
    [ 1.099447] registered taskstats version 1
    [ 1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
    [ 1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106355] Freeing unused kernel memory: 768k freed
    [ 1.106522] Write protecting the kernel read-only data: 8192k
    [ 1.116385] Freeing unused kernel memory: 1408k freed
    [ 1.117994] Freeing unused kernel memory: 568k freed
    [ 1.134497] systemd-udevd[78]: starting version 195
    [ 1.180869] ACPI: bus type usb registered
    [ 1.180984] usbcore: registered new interface driver usbfs
    [ 1.181051] usbcore: registered new interface driver hub
    [ 1.181311] usbcore: registered new device driver usb
    [ 1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.187253] ehci_hcd 0000:00:1a.0: debug port 2
    [ 1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
    [ 1.187791] SCSI subsystem initialized
    [ 1.189604] ACPI: bus type scsi registered
    [ 1.189681] libata version 3.00 loaded.
    [ 1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.195917] hub 1-0:1.0: USB hub found
    [ 1.195922] hub 1-0:1.0: 3 ports detected
    [ 1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.200176] ehci_hcd 0000:00:1d.0: debug port 2
    [ 1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
    [ 1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.209225] hub 2-0:1.0: USB hub found
    [ 1.209230] hub 2-0:1.0: 3 ports detected
    [ 1.209367] ahci 0000:00:1f.2: version 3.0
    [ 1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
    [ 1.209548] ahci: SSS flag set, parallel bus scan disabled
    [ 1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
    [ 1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
    [ 1.209597] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.223416] scsi0 : ahci
    [ 1.223797] scsi1 : ahci
    [ 1.224147] scsi2 : ahci
    [ 1.224500] scsi3 : ahci
    [ 1.224856] scsi4 : ahci
    [ 1.225221] scsi5 : ahci
    [ 1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
    [ 1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
    [ 1.225365] ata3: DUMMY
    [ 1.225367] ata4: DUMMY
    [ 1.225369] ata5: DUMMY
    [ 1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
    [ 1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
    [ 1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.549967] ata1.00: configured for UDMA/133
    [ 1.550374] scsi 0:0:0:0: Direct-Access ATA WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
    [ 1.626090] hub 1-1:1.0: USB hub found
    [ 1.626247] hub 1-1:1.0: 6 ports detected
    [ 1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
    [ 1.668460] Switching to clocksource tsc
    [ 1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
    [ 1.856178] hub 2-1:1.0: USB hub found
    [ 1.856346] hub 2-1:1.0: 8 ports detected
    [ 1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
    [ 1.880987] ata2.00: applying bridge limits
    [ 1.894279] ata2.00: configured for UDMA/100
    [ 1.895297] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
    [ 1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
    [ 2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
    [ 2.214657] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
    [ 2.220394] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.264902] sda: sda1 sda2
    [ 2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.286592] usbcore: registered new interface driver usbhid
    [ 2.286606] usbhid: USB HID core driver
    [ 2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
    [ 2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
    [ 2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
    [ 2.415244] device-mapper: uevent: version 1.0.3
    [ 2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 2.430414] hub 2-1.2:1.0: USB hub found
    [ 2.430750] hub 2-1.2:1.0: 4 ports detected
    [ 2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
    [ 2.583779] hub 2-1.6:1.0: USB hub found
    [ 2.583940] hub 2-1.6:1.0: 3 ports detected
    [ 2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
    [ 2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
    [ 2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
    [ 2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
    [ 3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
    [ 3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
    [ 3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
    [ 824.543880] Btrfs loaded
    [ 824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
    [ 824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
    [ 825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
    [ 825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
    [ 826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 826.913723] systemd[1]: Set hostname to <clawfinger>.
    [ 829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
    [ 829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
    [ 829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
    [ 829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
    [ 829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
    [ 829.536380] systemd[1]: Starting Replay Read-Ahead Data...
    [ 829.554901] systemd[1]: Starting Collect Read-Ahead Data...
    [ 829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 829.571319] systemd[1]: Starting Login Prompts.
    [ 829.571328] systemd[1]: Reached target Login Prompts.
    [ 829.571337] systemd[1]: Starting Remote File Systems.
    [ 829.571345] systemd[1]: Reached target Remote File Systems.
    [ 829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
    [ 829.571362] systemd[1]: Starting Syslog Socket.
    [ 829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
    [ 829.572842] systemd[1]: Failed to listen on Syslog Socket.
    [ 829.574007] systemd[1]: Starting Arch Daemons.
    [ 829.574014] systemd[1]: Reached target Arch Daemons.
    [ 829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 829.574106] systemd[1]: Starting Delayed Shutdown Socket.
    [ 829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 829.574218] systemd[1]: Starting udev Kernel Socket.
    [ 829.574239] systemd[1]: Listening on udev Kernel Socket.
    [ 829.574284] systemd[1]: Starting udev Control Socket.
    [ 829.574307] systemd[1]: Listening on udev Control Socket.
    [ 829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 829.574419] systemd[1]: Starting Encrypted Volumes.
    [ 829.574426] systemd[1]: Reached target Encrypted Volumes.
    [ 829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
    [ 829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
    [ 829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
    [ 829.574467] systemd[1]: Starting Journal Socket.
    [ 829.574507] systemd[1]: Listening on Journal Socket.
    [ 829.574529] systemd[1]: Mounting Huge Pages File System...
    [ 829.577956] systemd[1]: Mounting POSIX Message Queue File System...
    [ 829.591510] systemd[1]: Starting udev Coldplug all Devices...
    [ 829.594776] systemd[1]: Mounting Debug File System...
    [ 829.611201] systemd[1]: Starting udev Kernel Device Manager...
    [ 829.614769] systemd[1]: Starting Journal Service...
    [ 829.647758] systemd[1]: Started Journal Service.
    [ 829.647819] systemd[1]: Starting Syslog.
    [ 829.647843] systemd[1]: Reached target Syslog.
    [ 829.647879] systemd[1]: Starting home.automount.
    [ 829.901808] systemd[1]: Set up automount home.automount.
    [ 830.553864] systemd-udevd[249]: starting version 195
    [ 831.070954] ACPI: Requesting acpi_cpufreq
    [ 831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
    [ 831.456019] ACPI: Power Button [PWRB]
    [ 831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
    [ 831.456060] ACPI: Sleep Button [SLPB]
    [ 831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
    [ 831.457156] ACPI: Lid Switch [LID0]
    [ 831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 831.457206] ACPI: Power Button [PWRF]
    [ 831.457547] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 831.457548] AMD IOMMUv2 functionality not available on this system
    [ 831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 831.615336] Disabling lock debugging due to kernel taint
    [ 831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
    [ 831.619972] <6>[fglrx] vendor: 1002 device: 9488 count: 1
    [ 831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
    [ 831.620722] <6>[fglrx] Kernel PAT support is enabled
    [ 831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul 4 2012] with 1 minors
    [ 831.621578] ACPI: Fan [FAN0] (off)
    [ 831.621623] ACPI: Fan [FAN1] (off)
    [ 831.631874] vboxdrv: Found 8 processor cores.
    [ 831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
    [ 831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
    [ 832.286066] ACPI: AC Adapter [ADP1] (on-line)
    [ 832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 832.315135] acpi device:03: registered as cooling_device10
    [ 832.315214] ACPI: Video Device [M86] (multi-head: yes rom: no post: no)
    [ 832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
    [ 832.409308] thermal LNXTHERM:00: registered as thermal_zone0
    [ 832.409312] ACPI: Thermal Zone [TZ00] (27 C)
    [ 832.421895] ACPI: Battery Slot [BAT0] (battery present)
    [ 832.422793] thermal LNXTHERM:01: registered as thermal_zone1
    [ 832.422797] ACPI: Thermal Zone [TZ01] (69 C)
    [ 832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
    [ 832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
    [ 833.243492] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 833.265118] wmi: Mapper loaded
    [ 833.267255] sdhci: Secure Digital Host Controller Interface driver
    [ 833.267258] sdhci: Copyright(c) Pierre Ossman
    [ 833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
    [ 833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 833.513095] Registered led device: mmc0::
    [ 833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
    [ 833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
    [ 833.847354] EDAC MC: Ver: 3.0.0
    [ 833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    [ 834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
    [ 834.096454] ite_cir: Using model: ITE8708 CIR transceiver
    [ 834.096455] ite_cir: TX-capable: 1
    [ 834.096456] ite_cir: Sample period (ns): 8680
    [ 834.096457] ite_cir: TX carrier frequency (Hz): 38000
    [ 834.096458] ite_cir: TX duty cycle (%): 33
    [ 834.096459] ite_cir: RX low carrier frequency (Hz): 0
    [ 834.096460] ite_cir: RX high carrier frequency (Hz): 0
    [ 834.275945] iTCO_vendor_support: vendor-support=0
    [ 834.294684] cfg80211: Calling CRDA to update world regulatory domain
    [ 834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
    [ 834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
    [ 834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
    [ 835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
    [ 835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
    [ 835.152252] Registered IR keymap rc-rc6-mce
    [ 835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
    [ 835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
    [ 835.152504] ite_cir: driver has been successfully l

    My disk seems also fine
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital Scorpio Blue Serial ATA
    Device Model: WDC WD6400BEVT-75A0RT0
    Serial Number: WD-WX91C8077575
    LU WWN Device Id: 5 0014ee 600865d25
    Firmware Version: 01.01A01
    User Capacity: 640,135,028,736 bytes [640 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 5400 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 3.0 Gb/s
    Local Time is: Thu Dec 20 21:36:56 2012 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 248) Self-test routine in progress...
    80% of test remaining.
    Total time to complete Offline
    data collection: (16380) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 190) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x7037) SCT Status supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 184 181 021 Pre-fail Always - 1775
    4 Start_Stop_Count 0x0032 079 079 000 Old_age Always - 21418
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4329
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1828
    191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 2336
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 512
    193 Load_Cycle_Count 0x0032 161 161 000 Old_age Always - 119448
    194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 41
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
    240 Head_Flying_Hours 0x0032 095 095 000 Old_age Always - 4000
    241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 13521667898
    242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 14814445183
    254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Short offline Interrupted (host reset) 90% 4329 -
    # 2 Extended offline Completed without error 00% 4329 -
    # 3 Short offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.

  • [solved] Long boot time because of NetworkManager.service

    Hello. It seems that my ASUS N56V latptop takes a long time to boot. systemd-analyze reports this:
    Startup finished in 742ms (kernel) + 3.094s (initrd) + 23.838s (userspace) = 27.675s
    └──[4]──╼ systemd-analyze blame
    12.083s NetworkManager.service
    11.247s accounts-daemon.service
    1.137s home-sergio-Disco_Duro.mount
    735ms systemd-vconsole-setup.service
    710ms systemd-udev-trigger.service
    631ms systemd-tmpfiles-setup.service
    630ms dev-hugepages.mount
    628ms lm_sensors.service
    626ms systemd-logind.service
    515ms dev-mqueue.mount
    515ms sys-kernel-debug.mount
    440ms systemd-tmpfiles-setup-dev.service
    432ms ufw.service
    380ms dev-sda5.swap
    365ms [email protected]
    356ms gdm.service
    356ms systemd-udevd.service
    356ms systemd-binfmt.service
    353ms systemd-sysctl.service
    341ms systemd-readahead-replay.service
    340ms systemd-readahead-collect.service
    293ms tmp.mount
    274ms colord.service
    267ms alsa-restore.service
    266ms cpupower.service
    259ms upower.service
    226ms kmod-static-nodes.service
    79ms systemd-random-seed.service
    66ms proc-sys-fs-binfmt_misc.mount
    60ms systemd-remount-fs.service
    59ms [email protected]
    58ms udisks2.service
    44ms [email protected]
    30ms sys-kernel-config.mount
    10ms polkit.service
    6ms systemd-journal-flush.service
    5ms [email protected]
    4ms systemd-update-utmp.service
    4ms systemd-backlight@leds:asus::kbd_backlight.service
    2ms wpa_supplicant.service
    2ms rtkit-daemon.service
    2ms systemd-backlight@backlight:intel_backlight.service
    2ms [email protected]
    1ms [email protected]
    1ms systemd-user-sessions.service
    1ms systemd-readahead-done.service
    1ms sys-fs-fuse-connections.mount
    └──[14]──╼ systemd-analyze critical-chain
    The time after the unit is active or started is printed after the "@" character.
    The time the unit takes to start is printed after the "+" character.
    graphical.target @23.838s
    └─multi-user.target @23.838s
    └─NetworkManager.service @11.755s +12.083s
    └─basic.target @11.753s
    └─timers.target @11.753s
    └─systemd-tmpfiles-clean.timer @11.752s
    └─sysinit.target @11.719s
    └─systemd-update-utmp.service @11.712s +4ms
    └─systemd-tmpfiles-setup.service @11.079s +631ms
    └─local-fs.target @11.076s
    └─home-sergio-Disco_Duro.mount @9.938s +1.137s
    └─[email protected] @9.498s +365ms
    └─dev-sda6.device @9.497s
    And dmesg reports this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ad7a8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad7a9000-0x00000000adda9fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000addaa000-0x00000000addacfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addad000-0x00000000addc2fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000addc3000-0x00000000addc8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addc9000-0x00000000addcafff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000addcb000-0x00000000addd4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000addd5000-0x00000000adf2bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adf2c000-0x00000000adf2ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adf30000-0x00000000adf79fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adf7a000-0x00000000adf9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa0000-0x00000000adfa2fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa3000-0x00000000adfa4fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfa5000-0x00000000adfbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfbc000-0x00000000adfc1fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfc2000-0x00000000adfc9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfca000-0x00000000adfcafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfcb000-0x00000000adfd9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfda000-0x00000000adfdafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfdb000-0x00000000adfe5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000adfe6000-0x00000000adfeafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000adfeb000-0x00000000ae016fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae017000-0x00000000ae017fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae018000-0x00000000ae027fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae028000-0x00000000ae04efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae04f000-0x00000000ae061fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae062000-0x00000000ae062fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae063000-0x00000000ae063fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae064000-0x00000000ae065fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae066000-0x00000000ae066fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae067000-0x00000000ae06bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae06c000-0x00000000ae082fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae083000-0x00000000ae626fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ae627000-0x00000000ae8a6fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8a7000-0x00000000ae8abfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8ac000-0x00000000ae8acfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8ad000-0x00000000ae8effff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ae8f0000-0x00000000aecfefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000aecff000-0x00000000aeff3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000afc00000-0x00000000cfdfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001af1fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: ASUSTeK COMPUTER INC. N56VB/N56VB, BIOS N56VB.202 01/21/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x1af200 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask F80000000 write-back
    [ 0.000000] 2 base 180000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 5 base 0AFC00000 mask FFFC00000 uncachable
    [ 0.000000] 6 base 1B0000000 mask FF0000000 uncachable
    [ 0.000000] 7 base 1AF800000 mask FFF800000 uncachable
    [ 0.000000] 8 base 1AF400000 mask FFFC00000 uncachable
    [ 0.000000] 9 base 1AF200000 mask FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xafc00000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1af000000-0x1af1fffff]
    [ 0.000000] [mem 0x1af000000-0x1af1fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x1ac000000-0x1aeffffff]
    [ 0.000000] [mem 0x1ac000000-0x1aeffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x180000000-0x1abffffff]
    [ 0.000000] [mem 0x180000000-0x1abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0xad7a8fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0xad5fffff] page 2M
    [ 0.000000] [mem 0xad600000-0xad7a8fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddad000-0xaddc2fff]
    [ 0.000000] [mem 0xaddad000-0xaddc2fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddc9000-0xaddcafff]
    [ 0.000000] [mem 0xaddc9000-0xaddcafff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaddd5000-0xadf2bfff]
    [ 0.000000] [mem 0xaddd5000-0xadf2bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadf30000-0xadf79fff]
    [ 0.000000] [mem 0xadf30000-0xadf79fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfa0000-0xadfa2fff]
    [ 0.000000] [mem 0xadfa0000-0xadfa2fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfa5000-0xadfbbfff]
    [ 0.000000] [mem 0xadfa5000-0xadfbbfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfc2000-0xadfc9fff]
    [ 0.000000] [mem 0xadfc2000-0xadfc9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfcb000-0xadfd9fff]
    [ 0.000000] [mem 0xadfcb000-0xadfd9fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfdb000-0xadfe5fff]
    [ 0.000000] [mem 0xadfdb000-0xadfe5fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xadfeb000-0xae016fff]
    [ 0.000000] [mem 0xadfeb000-0xae016fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae018000-0xae027fff]
    [ 0.000000] [mem 0xae018000-0xae027fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae04f000-0xae061fff]
    [ 0.000000] [mem 0xae04f000-0xae061fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae063000-0xae063fff]
    [ 0.000000] [mem 0xae063000-0xae063fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae066000-0xae066fff]
    [ 0.000000] [mem 0xae066000-0xae066fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae06c000-0xae082fff]
    [ 0.000000] [mem 0xae06c000-0xae082fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae8ac000-0xae8acfff]
    [ 0.000000] [mem 0xae8ac000-0xae8acfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xae8f0000-0xaecfefff]
    [ 0.000000] [mem 0xae8f0000-0xae9fffff] page 4k
    [ 0.000000] [mem 0xaea00000-0xaebfffff] page 2M
    [ 0.000000] [mem 0xaec00000-0xaecfefff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xaeff4000-0xaeffffff]
    [ 0.000000] [mem 0xaeff4000-0xaeffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
    [ 0.000000] [mem 0x100000000-0x17fffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3757a000-0x37ab4fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 _ASUS_)
    [ 0.000000] ACPI: XSDT 0x00000000AE879078 00007C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000AE88CAE0 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000AE879188 013957 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
    [ 0.000000] ACPI: FACS 0x00000000AE8A4080 000040
    [ 0.000000] ACPI: APIC 0x00000000AE88CBF0 000072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000AE88CC68 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
    [ 0.000000] ACPI: ECDT 0x00000000AE88CCB0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: MCFG 0x00000000AE88CD78 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000AE88CDB8 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000AE88CDF0 000632 (v01 AhciR1 AhciTab1 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000AE88D428 00049E (v01 AhciR2 AhciTab2 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000AE88D8C8 0009D0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 0x00000000AE88E298 000B18 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MSDM 0x00000000AE626E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001af1fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1af1fffff]
    [ 0.000000] NODE_DATA [mem 0x1af1f1000-0x1af1f5fff]
    [ 0.000000] [ffffea0000000000-ffffea0006bfffff] PMD -> [ffff8801a9000000-ffff8801ae7fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x1af1fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0xad7a8fff]
    [ 0.000000] node 0: [mem 0xaddad000-0xaddc2fff]
    [ 0.000000] node 0: [mem 0xaddc9000-0xaddcafff]
    [ 0.000000] node 0: [mem 0xaddd5000-0xadf2bfff]
    [ 0.000000] node 0: [mem 0xadf30000-0xadf79fff]
    [ 0.000000] node 0: [mem 0xadfa0000-0xadfa2fff]
    [ 0.000000] node 0: [mem 0xadfa5000-0xadfbbfff]
    [ 0.000000] node 0: [mem 0xadfc2000-0xadfc9fff]
    [ 0.000000] node 0: [mem 0xadfcb000-0xadfd9fff]
    [ 0.000000] node 0: [mem 0xadfdb000-0xadfe5fff]
    [ 0.000000] node 0: [mem 0xadfeb000-0xae016fff]
    [ 0.000000] node 0: [mem 0xae018000-0xae027fff]
    [ 0.000000] node 0: [mem 0xae04f000-0xae061fff]
    [ 0.000000] node 0: [mem 0xae063000-0xae063fff]
    [ 0.000000] node 0: [mem 0xae066000-0xae066fff]
    [ 0.000000] node 0: [mem 0xae06c000-0xae082fff]
    [ 0.000000] node 0: [mem 0xae8ac000-0xae8acfff]
    [ 0.000000] node 0: [mem 0xae8f0000-0xaecfefff]
    [ 0.000000] node 0: [mem 0xaeff4000-0xaeffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x1af1fffff]
    [ 0.000000] On node 0 totalpages: 1428925
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11057 pages used for memmap
    [ 0.000000] DMA32 zone: 707617 pages, LIFO batch:31
    [ 0.000000] Normal zone: 11208 pages used for memmap
    [ 0.000000] Normal zone: 717312 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xafe00000-0xcfdfffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad7a9000-0xadda9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddaa000-0xaddacfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddc3000-0xaddc8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaddcb000-0xaddd4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadf2c000-0xadf2ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadf7a000-0xadf9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfa3000-0xadfa4fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfbc000-0xadfc1fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfca000-0xadfcafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfda000-0xadfdafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xadfe6000-0xadfeafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae017000-0xae017fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae028000-0xae04efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae062000-0xae062fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae064000-0xae065fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae067000-0xae06bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae083000-0xae626fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae627000-0xae8a6fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae8a7000-0xae8abfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xae8ad000-0xae8effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaecff000-0xaeff3fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf000000-0xafbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xafc00000-0xcfdfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8801aee00000 s86784 r8192 d23808 u524288
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1406575
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9da38127-36ed-47e5-ba97-e9656af3801b rw quiet splash rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 5541880K/5715700K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 173820K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 23068672 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2594.142 MHz processor
    [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.46 BogoMIPS (lpj=8647140)
    [ 0.000036] pid_max: default: 32768 minimum: 301
    [ 0.000042] ACPI: Core revision 20140424
    [ 0.013454] ACPI: All ACPI Tables successfully acquired
    [ 0.015248] Security Framework initialized
    [ 0.015253] Yama: becoming mindful.
    [ 0.015698] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.017594] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.018433] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.018442] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.018639] Initializing cgroup subsys memory
    [ 0.018655] Initializing cgroup subsys devices
    [ 0.018661] Initializing cgroup subsys freezer
    [ 0.018663] Initializing cgroup subsys net_cls
    [ 0.018666] Initializing cgroup subsys blkio
    [ 0.018687] CPU: Physical Processor ID: 0
    [ 0.018688] CPU: Processor Core ID: 0
    [ 0.018693] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.019034] mce: CPU supports 7 MCE banks
    [ 0.019044] CPU0: Thermal monitoring enabled (TM1)
    [ 0.019053] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    tlb_flushall_shift: 2
    [ 0.019156] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.020028] ftrace: allocating 20434 entries in 80 pages
    [ 0.029301] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.062327] smpboot: CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.062334] TSC deadline timer enabled
    [ 0.062356] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.062374] ... version: 3
    [ 0.062375] ... bit width: 48
    [ 0.062376] ... generic registers: 4
    [ 0.062377] ... value mask: 0000ffffffffffff
    [ 0.062377] ... max period: 0000ffffffffffff
    [ 0.062378] ... fixed-purpose events: 3
    [ 0.062379] ... event mask: 000000070000000f
    [ 0.089127] x86: Booting SMP configuration:
    [ 0.089129] .... node #0, CPUs: #1
    [ 0.102615] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.109323] #2 #3
    [ 0.143069] x86: Booted up 1 node, 4 CPUs
    [ 0.143072] smpboot: Total of 4 processors activated (20761.85 BogoMIPS)
    [ 0.146151] devtmpfs: initialized
    [ 0.148360] PM: Registering ACPI NVS region [mem 0xad7a9000-0xadda9fff] (6295552 bytes)
    [ 0.148429] PM: Registering ACPI NVS region [mem 0xae627000-0xae8a6fff] (2621440 bytes)
    [ 0.148457] PM: Registering ACPI NVS region [mem 0xae8ad000-0xae8effff] (274432 bytes)
    [ 0.149179] pinctrl core: initialized pinctrl subsystem
    [ 0.149217] RTC time: 23:34:40, date: 09/13/14
    [ 0.149261] NET: Registered protocol family 16
    [ 0.149360] cpuidle: using governor ladder
    [ 0.149362] cpuidle: using governor menu
    [ 0.149386] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.149388] ACPI: bus type PCI registered
    [ 0.149389] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.149452] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.149454] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.149534] PCI: Using configuration type 1 for base access
    [ 0.163412] ACPI: Added _OSI(Module Device)
    [ 0.163414] ACPI: Added _OSI(Processor Device)
    [ 0.163415] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.163416] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.165254] ACPI : EC: EC description table is found, configuring boot EC
    [ 0.167131] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.283333] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.313759] ACPI: Dynamic OEM Table Load:
    [ 0.313766] ACPI: SSDT 0xFFFF8801A66AB000 000853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.323515] ACPI: Dynamic OEM Table Load:
    [ 0.323519] ACPI: SSDT 0xFFFF8801A6633C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.336756] ACPI: Dynamic OEM Table Load:
    [ 0.336759] ACPI: SSDT 0xFFFF8801A665BE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.347197] ACPI: Interpreter enabled
    [ 0.347203] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.347207] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.347221] ACPI: (supports S0 S3 S4 S5)
    [ 0.347222] ACPI: Using IOAPIC for interrupt routing
    [ 0.347245] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.468144] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.468149] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.556840] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 0.556961] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 0.557508] PCI host bridge to bus 0000:00
    [ 0.557511] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.557512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.557514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.557515] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.557517] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.557518] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.557519] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.557521] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.557522] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.557523] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.557525] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
    [ 0.557532] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 0.557613] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.557643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.557680] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.557718] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 0.557728] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.557734] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.557739] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.557836] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.557859] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
    [ 0.557931] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.557971] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.558011] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.558034] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1a000-0xf7a1a00f 64bit]
    [ 0.558108] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.558190] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.558212] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a18000-0xf7a183ff]
    [ 0.558303] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.558345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.558382] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.558398] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
    [ 0.558473] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.558516] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.558550] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.558633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.558708] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.558790] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.558866] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
    [ 0.558948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.558992] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.559033] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.559054] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a17000-0xf7a173ff]
    [ 0.559145] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.559186] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.559222] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
    [ 0.559393] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 0.559411] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.559418] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.559427] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.559434] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.559441] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.559449] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a16000-0xf7a167ff]
    [ 0.559495] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.559563] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.559579] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a15000-0xf7a150ff 64bit]
    [ 0.559600] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.559717] pci 0000:01:00.0: [10de:0fdf] type 00 class 0x030200
    [ 0.559731] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.559743] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.559755] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.559763] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.559772] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.563477] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.563482] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.563487] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.563493] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.563574] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.563712] pci 0000:03:00.0: [8086:0887] type 00 class 0x028000
    [ 0.563765] pci 0000:03:00.0: reg 0x10: [mem 0xf7900000-0xf7901fff 64bit]
    [ 0.564012] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.564057] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.570225] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.570232] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.570322] pci 0000:04:00.0: [1969:1091] type 00 class 0x020000
    [ 0.570354] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf783ffff 64bit]
    [ 0.570368] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.570508] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.570545] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.576839] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.576847] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.576854] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.576926] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.630685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    [ 0.630728] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
    [ 0.630769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
    [ 0.630809] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
    [ 0.630851] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.630892] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
    [ 0.630936] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 12)
    [ 0.630976] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
    [ 0.631110] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.631171] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
    [ 0.631262] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.631264] vgaarb: loaded
    [ 0.631265] vgaarb: bridge control possible 0000:00:02.0
    [ 0.631295] PCI: Using ACPI for IRQ routing
    [ 0.632841] PCI: pci_cache_line_size set to 64 bytes
    [ 0.632894] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.632895] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.632896] e820: reserve RAM buffer [mem 0xad7a9000-0xafffffff]
    [ 0.632901] e820: reserve RAM buffer [mem 0xaddc3000-0xafffffff]
    [ 0.632906] e820: reserve RAM buffer [mem 0xaddcb000-0xafffffff]
    [ 0.632911] e820: reserve RAM buffer [mem 0xadf2c000-0xafffffff]
    [ 0.632915] e820: reserve RAM buffer [mem 0xadf7a000-0xafffffff]
    [ 0.632919] e820: reserve RAM buffer [mem 0xadfa3000-0xafffffff]
    [ 0.632924] e820: reserve RAM buffer [mem 0xadfbc000-0xafffffff]
    [ 0.632928] e820: reserve RAM buffer [mem 0xadfca000-0xafffffff]
    [ 0.632932] e820: reserve RAM buffer [mem 0xadfda000-0xafffffff]
    [ 0.632935] e820: reserve RAM buffer [mem 0xadfe6000-0xafffffff]
    [ 0.632939] e820: reserve RAM buffer [mem 0xae017000-0xafffffff]
    [ 0.632942] e820: reserve RAM buffer [mem 0xae028000-0xafffffff]
    [ 0.632946] e820: reserve RAM buffer [mem 0xae062000-0xafffffff]
    [ 0.632949] e820: reserve RAM buffer [mem 0xae064000-0xafffffff]
    [ 0.632951] e820: reserve RAM buffer [mem 0xae067000-0xafffffff]
    [ 0.632954] e820: reserve RAM buffer [mem 0xae083000-0xafffffff]
    [ 0.632956] e820: reserve RAM buffer [mem 0xae8ad000-0xafffffff]
    [ 0.632958] e820: reserve RAM buffer [mem 0xaecff000-0xafffffff]
    [ 0.632959] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
    [ 0.632961] e820: reserve RAM buffer [mem 0x1af200000-0x1afffffff]
    [ 0.633057] NetLabel: Initializing
    [ 0.633058] NetLabel: domain hash size = 128
    [ 0.633059] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.633069] NetLabel: unlabeled traffic allowed by default
    [ 0.633093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.633097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.635125] Switched to clocksource hpet
    [ 0.639054] pnp: PnP ACPI init
    [ 0.639068] ACPI: bus type PNP registered
    [ 0.639157] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.639160] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.691999] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.692001] system 00:01: [io 0x1000-0x100f] has been reserved
    [ 0.692003] system 00:01: [io 0xffff] has been reserved
    [ 0.692004] system 00:01: [io 0xffff] has been reserved
    [ 0.692006] system 00:01: [io 0x0400-0x0453] could not be reserved
    [ 0.692007] system 00:01: [io 0x0458-0x047f] has been reserved
    [ 0.692009] system 00:01: [io 0x0500-0x057f] has been reserved
    [ 0.692010] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.692013] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692041] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.692088] system 00:03: [io 0x0454-0x0457] has been reserved
    [ 0.692090] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.692134] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.692136] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692189] pnp 00:05: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.692225] pnp 00:06: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
    [ 0.692379] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.692381] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.692383] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.692384] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.692386] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.692388] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.692389] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.692391] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.692393] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.692395] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.692396] system 00:07: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 0.692398] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692464] system 00:08: [mem 0xcfe00000-0xcfe00fff] has been reserved
    [ 0.692466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.692587] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.692589] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.692591] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.692617] pnp: PnP ACPI: found 10 devices
    [ 0.692618] ACPI: bus type PNP unregistered
    [ 0.698950] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.698953] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.698956] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.698958] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.698961] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.698973] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.698978] pci 0000:00:1c.1: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.698986] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.698989] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.698995] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.699004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.699005] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.699007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.699008] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.699009] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.699011] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.699012] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.699014] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.699015] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.699016] pci_bus 0000:00: resource 13 [mem 0xcfe00000-0xfeafffff]
    [ 0.699018] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.699019] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.699021] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.699023] pci_bus 0000:03: resource 1 [mem 0xf7900000-0xf79fffff]
    [ 0.699024] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.699026] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf78fffff]
    [ 0.699048] NET: Registered protocol family 2
    [ 0.699217] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.699348] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.699457] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.699472] TCP: reno registered
    [ 0.699483] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.699508] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.699564] NET: Registered protocol family 1
    [ 0.699579] pci 0000:00:02.0: Boot video device
    [ 0.735318] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.735322] PCI: CLS 64 bytes, default 64
    [ 0.735362] Unpacking initramfs...
    [ 0.816940] Freeing initrd memory: 5356K (ffff88003757a000 - ffff880037ab5000)
    [ 0.816948] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.816950] software IO TLB [mem 0xa97a9000-0xad7a9000] (64MB) mapped at [ffff8800a97a9000-ffff8800ad7a8fff]
    [ 0.817180] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.817219] Scanning for low memory corruption every 60 seconds
    [ 0.817445] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.817768] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.818908] zbud: loaded
    [ 0.819058] VFS: Disk quotas dquot_6.5.2
    [ 0.819086] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.819182] msgmni has been set to 10834
    [ 0.819224] Key type big_key registered
    [ 0.819368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.819416] io scheduler noop registered
    [ 0.819420] io scheduler deadline registered
    [ 0.819459] io scheduler cfq registered (default)
    [ 0.819605] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.819964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.819978] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.820007] intel_idle: MWAIT substates: 0x21120
    [ 0.820008] intel_idle: v0.4 model 0x3A
    [ 0.820009] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.820167] GHES: HEST is not enabled!
    [ 0.820230] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.820623] Linux agpgart interface v0.103
    [ 0.820666] rtc_cmos 00:02: RTC can wake from S4
    [ 0.820787] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.820817] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.820826] Intel P-state driver initializing.
    [ 0.820835] Intel pstate controlling: cpu 0
    [ 0.820854] Intel pstate controlling: cpu 1
    [ 0.820871] Intel pstate controlling: cpu 2
    [ 0.820903] Intel pstate controlling: cpu 3
    [ 0.820972] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.821169] TCP: cubic registered
    [ 0.821332] NET: Registered protocol family 10
    [ 0.821644] NET: Registered protocol family 17
    [ 0.822136] registered taskstats version 1
    [ 0.822912] Magic number: 14:465:605
    [ 0.823042] rtc_cmos 00:02: setting system clock to 2014-09-13 23:34:40 UTC (1410651280)
    [ 0.823314] PM: Hibernation image not present or could not be loaded.
    [ 0.824652] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.824655] Write protecting the kernel read-only data: 8192k
    [ 0.828153] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 0.829631] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.831604] random: systemd urandom read with 1 bits of entropy available
    [ 0.832821] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked executable. Please remove executable permission bits. Proceeding anyway.
    [ 0.832824] systemd[1]: Configuration file /usr/lib/systemd/system/ctrl-alt-del.target is marked world-writable. Please remove world writability permission bits. Proceeding anyway.
    [ 0.835895] systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
    [ 0.835900] systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
    [ 0.835907] systemd[1]: Cannot add dependency job for unit systemd-journald-dev-log.socket, ignoring: Unit systemd-journald-dev-log.socket failed to load: No such file or directory.
    [ 0.835915] systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
    [ 0.835918] systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
    [ 0.835921] systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
    [ 0.846204] systemd-udevd[61]: starting version 216
    [ 0.851356] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [ 0.857066] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.858876] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.870874] ACPI: bus type USB registered
    [ 0.870902] usbcore: registered new interface driver usbfs
    [ 0.870913] usbcore: registered new interface driver hub
    [ 0.870957] usbcore: registered new device driver usb
    [ 0.871727] [drm] Initialized drm 1.1.0 20060810
    [ 0.871912] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.871977] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.872004] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.872031] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.872054] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.872570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.872800] ehci-pci: EHCI PCI platform driver
    [ 0.872972] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.872979] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.872995] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.873414] SCSI subsystem initialized
    [ 0.874735] libata version 3.00 loaded.
    [ 0.876901] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.876921] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a18000
    [ 0.878730] ACPI: Lid Switch [LID]
    [ 0.878783] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    [ 0.878787] ACPI: Sleep Button [SLPB]
    [ 0.878823] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 0.878824] ACPI: Power Button [PWRF]
    [ 0.885423] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.885744] hub 1-0:1.0: USB hub found
    [ 0.885754] hub 1-0:1.0: 2 ports detected
    [ 0.886157] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.886163] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.886179] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.890092] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.890108] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a17000
    [ 0.898678] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.898863] hub 2-0:1.0: USB hub found
    [ 0.898873] hub 2-0:1.0: 2 ports detected
    [ 0.899123] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.899131] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.899234] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.899258] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 0.899457] hub 3-0:1.0: USB hub found
    [ 0.899469] hub 3-0:1.0: 4 ports detected
    [ 0.899602] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.899604] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.899850] hub 4-0:1.0: USB hub found
    [ 0.899861] hub 4-0:1.0: 4 ports detected
    [ 0.899997] ahci 0000:00:1f.2: version 3.0
    [ 0.900123] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 0.912049] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
    [ 0.912054] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 0.919284] scsi0 : ahci
    [ 0.919473] scsi1 : ahci
    [ 0.919569] scsi2 : ahci
    [ 0.919652] scsi3 : ahci
    [ 0.919737] scsi4 : ahci
    [ 0.919817] scsi5 : ahci
    [ 0.919849] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 42
    [ 0.919850] ata2: DUMMY
    [ 0.919853] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 42
    [ 0.919853] ata4: DUMMY
    [ 0.919854] ata5: DUMMY
    [ 0.919855] ata6: DUMMY
    [ 0.920241] [drm] Memory usable by graphics device = 2048M
    [ 0.920243] [drm] Replacing VGA console driver
    [ 0.921140] Console: switching to colour dummy device 80x25
    [ 0.927099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 0.978778] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 0.978791] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.978793] [drm] Driver supports precise vblank timestamp query.
    [ 0.992401] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.031464] fbcon: inteldrmfb (fb0) is primary device
    [ 1.192296] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.238940] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.238968] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.241132] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.241135] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.242336] ata3.00: ATAPI: MATSHITABD-CMB UJ160, 1.00, max UDMA/133
    [ 1.244048] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.244388] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.244391] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.244636] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.244639] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.245827] ata3.00: configured for UDMA/133
    [ 1.249666] ata1.00: ATA-8: WDC WD7500BPVT-80HXZT3, 01.01A01, max UDMA/133
    [ 1.249668] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.254977] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.255204] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.255207] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.260474] ata1.00: configured for UDMA/133
    [ 1.260796] scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPVT-8 1A01 PQ: 0 ANSI: 5
    [ 1.262991] scsi 2:0:0:0: CD-ROM MATSHITA BD-CMB UJ160 1.00 PQ: 0 ANSI: 5
    [ 1.279845] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    [ 1.279848] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.279989] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.279992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.280037] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.288053] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.288055] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.288272] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.305366] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
    [ 1.305367] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
    [ 1.316307] hub 1-1:1.0: USB hub found
    [ 1.316391] hub 1-1:1.0: 6 ports detected
    [ 1.397316] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 1.399073] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.422404] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.546748] hub 2-1:1.0: USB hub found
    [ 1.546905] hub 2-1:1.0: 6 ports detected
    [ 1.683098] Console: switching to colour frame buffer device 240x67
    [ 1.692813] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 1.692815] i915 0000:00:02.0: registered panic notifier
    [ 1.709304] usb 3-3: new low-speed USB device number 2 using xhci_hcd
    [ 1.709735] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 1.709833] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8
    [ 1.727351] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.752763] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
    [ 1.752815] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.819288] tsc: Refined TSC clocksource calibration: 2594.112 MHz
    [ 1.887971] usb 3-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.890031] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.900283] usbcore: registered new interface driver usbhid
    [ 1.900287] usbhid: USB HID core driver
    [ 1.901514] input: Microsoft Comfort Mouse 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:045E:077B.0001/input/input10
    [ 1.901597] hid-generic 0003:045E:077B.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Mouse 3000] on usb-0000:00:14.0-3/input0
    [ 1.966216] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
    [ 2.132934] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
    [ 2.416335] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 2.820032] Switched to clocksource tsc
    [ 2.888651] random: nonblocking pool is initialized
    [ 3.089789] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.358639] systemd-journald[53]: Received SIGTERM from PID 1 (systemd).
    [ 5.897107] systemd-readahead[155]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 6.512882] EXT4-fs (sda8): re-mounted. Opts: data=ordered
    [ 7.301637] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 7.308423] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 7.314841] systemd-udevd[191]: starting version 216
    [ 7.318026] ip6_tables: (C) 2000-2006 Netfilter Core Team
    [ 9.643450] ACPI: AC Adapter [AC0] (off-line)
    [ 9.707164] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
    [ 9.707175] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
    [ 9.707183] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707188] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707194] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707200] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707203] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707208] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707214] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707217] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
    [ 9.707222] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
    [ 9.707228] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.707231] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 9.732620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 9.754610] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 9.823510] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140424/utaddress-258)
    [ 9.823518] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 9.823522] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 9.885093] ACPI: Battery Slot [BAT0] (battery present)
    [ 9.885341] wmi: Mapper loaded
    [ 10.025457] input: PC Speaker as /devices/platform/pcspkr/input/input11
    [ 10.107482] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.107485] ACPI: Thermal Zone [THRM] (54 C)
    [ 10.123269] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.219286] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.271262] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 10.271264] Copyright(c) 2003- 2014 Intel Corporation
    [ 10.271366] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 10.271428] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 10.310963] iTCO_vendor_support: vendor-support=0
    [ 10.422203] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422220] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422235] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
    [ 10.422315] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 10.525335] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [60:a4:4c:70:de:11]
    [ 10.559149] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 10.559206] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
    [ 10.559374] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.574607] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 10.677032] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 10.694508] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 10.694514] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 10.694517] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 10.694521] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
    [ 10.694580] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 10.703738] asus_wmi: ASUS WMI generic driver loaded
    [ 10.704976] asus_wmi: Initialization: 0x1
    [ 10.705014] asus_wmi: BIOS WMI version: 7.9
    [ 10.705057] asus_wmi: SFUN value: 0x6a0877
    [ 10.706030] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
    [ 10.715790] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 10.807860] asus_wmi: Backlight controlled by ACPI video driver
    [ 10.883267] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 10.898742] sound hdaudioC0D0: autoconfig: line_outs=2 (0x14/0x16/0x0/0x0/0x0) type:speaker
    [ 10.898747] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.898750] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 10.898752] sound hdaudioC0D0: mono: mono_out=0x0
    [ 10.898754] sound hdaudioC0D0: dig-out=0x1e/0x0
    [ 10.898756] sound hdaudioC0D0: inputs:
    [ 10.898759] sound hdaudioC0D0: Internal Mic=0x19
    [ 10.898762] sound hdaudioC0D0: Mic=0x18
    [ 10.911221] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input17
    [ 10.911566] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
    [ 10.911637] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
    [ 10.911707] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
    [ 11.070896] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
    [ 11.085464] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x15, 0x0d.
    [ 11.152788] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
    [ 11.532713] systemd-udevd[285]: renamed network interface eth0 to enp4s0
    [ 11.632559] systemd-udevd[285]: renamed network interface wlan0 to wlp3s0
    [ 11.796657] mousedev: PS/2 mouse device common for all mice
    [ 11.814896] AVX version of gcm_enc/dec engaged.
    [ 12.249546] media: Linux media interface: v0.10
    [ 12.405592] Linux video capture interface: v2.00
    [ 12.489425] Bluetooth: Core ver 2.19
    [ 12.489454] NET: Registered protocol family 31
    [ 12.489458] Bluetooth: HCI device and connection manager initialized
    [ 12.489470] Bluetooth: HCI socket layer initialized
    [ 12.489475] Bluetooth: L2CAP socket layer initialized
    [ 12.489499] Bluetooth: SCO socket layer initialized
    [ 12.618057] usbcore: registered new interface driver btusb
    [ 12.741864] Adding 6291452k swap on /dev/sda5. Priority:-1 extents:1 across:6291452k FS
    [ 12.946876] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883)
    [ 12.964918] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21
    [ 12.965046] usbcore: registered new interface driver uvcvideo
    [ 12.965049] USB Video Class driver (1.1.1)
    [ 13.388855] intel_rapl: RAPL domain dram detection failed
    [ 15.010386] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 15.017669] systemd-journald[159]: Received request to flush runtime journal from PID 1
    [ 27.377350] bbswitch: version 0.8
    [ 27.377363] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 27.377367] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 27.377374] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 27.377449] bbswitch: detected an Optimus _DSM function
    [ 27.377495] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
    [ 27.378547] bbswitch: disabling discrete graphics
    [ 27.378554] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 27.805771] alx 0000:04:00.0: irq 47 for MSI/MSI-X
    [ 27.806124] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 27.840453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 27.847948] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    [ 28.089495] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
    [ 28.097001] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
    [ 28.163505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
    [ 28.525115] fuse init (API version 7.23)
    [ 28.890210] wlp3s0: authenticate with 90:0d:cb:19:04:e0
    [ 28.895402] wlp3s0: send auth to 90:0d:cb:19:04:e0 (try 1/3)
    [ 28.897519] wlp3s0: authenticated
    [ 28.900414] wlp3s0: associate with 90:0d:cb:19:04:e0 (try 1/3)
    [ 28.916513] wlp3s0: RX AssocResp from 90:0d:cb:19:04:e0 (capab=0xc11 status=0 aid=4)
    [ 28.936417] wlp3s0: associated
    [ 28.936448] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
    [ 28.936477] cfg80211: Calling CRDA to update world regulatory domain
    [ 32.940

    hcra wrote:You might see this Wiki page for long boot times and NetworkManager
    https://wiki.archlinux.org/index.php/Sy … _over_time
    Wow, that solved this problem. I had 5 GB of systemd logs. I deleted them (after making a backup on another disk), I limited the journal size to only 50MB, and now NetworkManager only lasts 4 seconds to start, and GDM appears 10 seconds earlier. Thanks a lot

  • 2009 Mac Pro Quad Will Not Boot

    Hi.
    I have a 2009 Quad 3.0Ghz Mac Pro that will not boot up.
    I went to it this morning and the beach ball was spinning. I could not get it to stop and as a last resort, turned it off. It has been working fine, although
    I have noticed a little slow (Could be me, though).
    When I tried to reboot it, it tried to start, chime went off, but it stayed on the light grey screen and eventually, it had a folder with a question mark in it
    that blinked.
    I disconnected all peripherals, no change.
    Tried to boot from the optical drive  with Disk Warrior, no change.
    Anybody have any ideas?
    Thanks in advance for any help.
    Brian

    The Chime is generated in Software when the first part of the Power-On Self Test has passed. If an appropriate source of software can be found, booting is likely.
    it had a folder with a question mark in it that blinked.
    That says it could not find the last-specified source of software. the drive may be damaged, or it may have forgotten where it should be looking.
    Tried to boot from the optical drive  with Disk Warrior, no change.
    Next try a 10.6 DVD. "A Mac that cannot boot from an appropriate Installer/Utilities DVD has a Hardware problem".
    One of the simplest things it should be able to do is Startup Manager. Hold down the Alt/Option key at startup and it should draw a gray or blue screen and slowly draw an Icon for each potentially-bootbale device (including a bootable DVD, if inserted).

  • My mac pro keeps trying to boot up but will not.

    My mac pro keeps trying to boot up but will not. How do I fix his?

    What happens when it tries to boot up?

  • Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac pro but will not boot. Can original install disks be replaced. Thanks

    Need to erase hard drive and reinstall system on iMac but have misplaced original install disks. Tried to use a my copy of Snow lepord 10.6 from my Mac Pro but will not boot. Can original install disks be replaced. Thanks

    Yes the original Install Discs can be replaced for a nominal fee. Call AppleCare, you will need a credit card and the serial number of the machine. You can use the AppleCare Contact Info for the phone number on your part of the planet.

  • My mac pro is taking long to open any program what is the cause of this

    my mac pro is taking long to open any program what is the cause of this

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • TS2002 my mac pro takes a long time to start up!

    i had my mac pro for less than a year.
    i updated it to lion.
    now, my mac heats up very fast, the fans won't stop running, and my startup seems to get slower and slower

    I assume that's 117°F ?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there.
    Then I'd get Lion Cache Cleaner & clear the caches...
    http://www.northernsoftworks.com/lioncachecleaner.html
    So, have you opened Console yet & seen any messages going by?

Maybe you are looking for

  • Portal runtime Error

    Hi Experts, I am getting the follwoing error when i try to access the KM Content in Content Administration. Any sollution for that ? java.lang.NullPointerException         at com.sapportals.wcm.rendering.uicommand.UICommandFactory.getGroupList(UIComm

  • [solved] MP3 library management question, need advice

    Let me preface this, I LOVE amarok 1.4. Not as a player, hundreds of apps can play MP3's, but its ability to organize/tag. I have a new dir of MP3s, I can open them into the playlist, tag/retag/run musicbrainz, then import them into the master direct

  • Re: Oracle SQL Developer

    Whenever I try to export my results to a any other data format the GUI freezes. Can anyone say why.

  • Lion disables system info and software update in about this mac

    hey guys I have problem with lion when I reboot lion, it disables system info and software update in "about this mac" actually it says "this button is disabled because there is no system profiler application" or  "this button is disabled because ther

  • How to retrieve the Source XML Payload into an External System using message ID?

    Dear Experts, I have a requirement to retrieve the inbound XML message payload based on Message ID into Backend ERP system for reference or re-process as needed. Request you to let me know the technique to get the source payload of successful message