Mac pro want recognize g5 hard drive

i put the hard drive with the os and tiger on it out of my g5 in my mac pro.it shows up on the desktop and i can access it with no problem.but i want to be able to boot up to either drive and os but start up disc doesnt recognize the g5 drive.its not shown when i restart and hold the opiton either,just the pro mac drive.so how do i get it to boot up with the g5 disc?

Disk drives from G5s have a slightly different partition scheme, as well as the fact the OS runs on different types of CPU, the G5 PowerPC (IBM) is totally different and totally different code, then the Mac Pro Xeon (Intel). Macs never ran on x86 Intel hardware before. Also, the Xeon is even more advanced 64-bit chip.
Leopard 10.5 is designed to work on PPC and Intel. Whether the underlying partition scheme matters or not might still be an issue (and best to reformat the drive anyway, when moving to new OS and to new hardware platform).

Similar Messages

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this

I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far

Mac Pro with Lion had hard drive replaced, left me with 10.5

My late 2007 Mac Pro with Lion had hard drive replaced by Genius Bar at Short Pump, VA, Apple Store. They left me with 10.5, I have gotten back to 10.6.8 but how can I get back to Lion? Any tips? On-line advice to hold OPTION key down while clicking "purchases" doesn't work. The 2007 Mac Pro can't take Mountain Lion. Am I stuck with Snow Leopard?

Don't know what OS I was at when I saw the purchase, but there was no install button and the layout of the app store was weird. I had over 100 apps there for my ipad, and it let me download them all, but not Lion. Now that I am finally up to 10.6.8, I only see 4 apps, not Lion. One (iphoto) ironically says "requires OS X v10.7". Where is Lion now? It is not there in my purchased list, whether I hold "option" while pressing "purchases" or not.

How do i save files from mac pro to an external hard drive

how do i save files from mac pro to an external hard drive

Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
Tuxera NTFS 2012.3.2
NTFS for Mac OS X 9.5.3
To repartition:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Why can't I copy my photo files from my Mac Pro to the External Hard Drive?

Whay can't I copy my photo files from my Mac Book Pro to my External Hard Drive?

Are you trying to copy the actual files or the iPhoto Library? Are you tryuing to do it in iPhoto or in a finder window?

Mac Pro 8 Core (2008) Hard Drive & Ram questions

Hi there,
I recently purchased a Mac Pro 8 Core 2008 Model with 2Gb ram and 320Gb Hard Drive (Got a great deal on it... paid $1,500.00 for it!!). I bought this computer exclusively for audio production work. I know I can upgrade up to 32GB of ram if I wanted to however, I have heard that the system won't recognize 32GB ram when running 32bit OS & Applications. I use Ableton Live 8.2 (32bit capable) and Logic Studio 9 (32bit & 64bit capable).. what is the highest amount of ram I should upgrade to without overkilling it? In other words... what is the highest amount of ram I can upgrade to that I will actually notice the difference and that the system will actually use @ 32bit?
Second question is regarding hard drives... I need at least 320GB for OS and core applications and at least 1 TB for storage... what is the most efficient, fastest and least expensive to upgrade the storage on this machine?
I really appreciate your comments on this one.

Someone with Mac Pro, but on OS X 10.6 Install forum, like some, has full suites of CS5, FCP and others, and had run out of space literally on 150GB boot drive.
Apps like iDVD tech note recommended the boot drive have 24GB of free space (unfragmented for best burn performance) to burn dual layer.
X-Plane can go anywhere but uses almost 60GB for full world support.
My rule of thumb is 50% free on boot drive to avoid fragmenting free space such that it causes problems and there is always good performance overall as well as for read/writes.
To say someone doesn't need xyz when maybe they rre right, and to argue with their own math?
OS X does not support TRIM or I'd see if you can go with 120GB SSD. One way to slim down boot drive of course, maybe you have, maybe not,
Move all the data and media files possible off the boot drive can save 100GB and improve I/O at the same time.
Move the entire home account folder (the above leaves a smaller 1GB home library only on boot drive) which really isn't totally necessary but nice for some.
WD Black Caviar 2TB $170 is fast and nice or $89 for 1TB (if you think you need A, then get 2 x as much storage).
2008s don't use 8GB DIMMs and 32GB is as far as they go.
ATI 5770/5870 or even Quadro 4000 graphics
did it come with a 4870? or 8800GT?

Mac Pro Won't Boot, Hard Drives Are Fine, Passes Hardware Test

I have a Mac Pro 1,1 that will not boot anymore. The hard drives are just fine. I put them into another Mac Pro 1,1 and they started up fine and that computer is running great. I have replaced the RAM, put in new Hard Drives, I only have a keyboard, mouse, and display plugged in to it, and it still won't boot. What happens is this:
Boots up, shows the gray screen. Shows Apple Logo. Goes to Black with mouse cursor, stays at the black screen. I can move the mouse cursor as normal. Sometimes it turns into a color wheel, but most of the time it's a normal pointer.
I have run the hardware test several times, both quick and extended. Everything always passes the tests. I can boot into target disk mode and use the disks fine via firewire. When I try to boot from a Lion USB disk, or a Snow Leopard DVD, it always does the same as above and stops at the black screen. Basically, once it gets to the point where it loads an OS X system, it stops at the black screen as if something isn't working right. Any thoughts?

once it gets to the point where it loads an OS X system, it stops at the black screen as if something isn't working right.
That is the point at which the graphics card starts the Mac OS X loaded graphics Driver, and it may indicate that your graphics card is broken.
Try Safe Mode (hold down Shift at Startup). It takes five minutes to check the Boot drive, then display a login screen. You need your username and password to proceed, even if you normally auto-login.
Safe Mode uses only "simple" graphics. It does not load the graphics driver.
If you need a replacement card, I recommend you skip over all the refurbished and repaired old graphics cards and install nothing older than the Apple-Firmware 5770, about US$250. It works in every model Mac Pro, and drivers are in 10.6.5 and later.

Early 2008 Mac Pro: Add larger internal hard drive?

ref: Early 2008 Mac Pro
The original tech specs specify the use 4 1T internal hard drives.
Can I use a 2T hard drive in the internal bays instead?

Hi himacdallas1,
There is no problem replacing one or more of your 1 TB HDDs with a 2TB HDD, or just adding 2TB drives in empty bays, unless you have a raid configuration, in which case all the drives in the set-up should be identical.
The Western Digital Caviar Black is an excellent choice:
http://macperformanceguide.com/Storage-Drive-WesternDigital-CaviarBlack-2TB.html
The above link is a bit out of date, and this is the manufacturer's current website page for its Caviar Black Range:
http://www.wdc.com/en/products/products.aspx?id=100
Regards,
Bill

I just installed a new Samsung 840 to my 2010 mac pro as a second hard drive. It is not showing up in my startup drive in system preferences

I have a 2010 Mac Pro with a 1TB HHD. I just installed and formatted a Samsung 840 Pro SSD. I want to install a clean copy of Mavericks to the SSD and have the computer boot up to it. How do I install Mavericks to the SSD? Also, the Samsung SSD does not show up as an option in Start up in system preferences. Please help!

What OS do you want to install? If you bought your MP early enough, it may have shipped with actual install discs, and you could use those. If it shipped with Lion or newer, you will have to follow one of the procedures mentioned by Niel.
You can get Mavericks from the App Store. Before you run the installer, copy (copy, not move) the whole "Install Mavericks" download to a backup location so that you can install it again if necessary. The installer in the Applications Folder will be deleted after installation is complete, so a copy is needed.

Mac Pro can't find hard drive with Snow Leopard installed on

Hello there,
I have a three harddrive setup.
Harddrive 1 is in bay 1 and has two partitions.
1: For system and apps
2: For Documents and stuff
Hard drive 2+3 are in Bay 2+3 and are combined to a RAID 0 drive.
Some time ago I installed Leopard and the brand new an formatted hard drive.
It happened that it always took 2 start ups to run Leopard because always on the first time it didn t find the system on hard drive one. Pushing the 'D' button often helped.
Of course that was nothing to work with, although I at least could get some work done, once I loaded Leopard successfully.
So I tried Disk Utility, fsck without success.
I also tried the way of using fdisk to mark the partion as active, which only resulted in now not being able to boot at all.
Booting from DVD I also tried choosing my Leopard install on my hard drive as boot device (it has always shown up here) but still without success.
I am afraid things are quite messed up, since there were a few things happening at one time, which I am not overly happy about now. (Installing new RAM, installing SNOW LEOPARD on the new harddrive 1 in bay one, having still the RAID with LEOPARD on in bays 2+3).
I am already certain to do a fresh and complete reinstall of the system, I have my backup, but still there is some iTunes music and a few documents I haven't backed up yet, which I'd rather would not like to lose...
Put it short:
What could I do to get my system running at least once?
Thanks a lot,
max.

After some research I found out about the nice TargetDiskMode which I used to save all my important data with my MacBook.
http://support.apple.com/kb/HT1661
Ready to perform a complete and fresh install now!
Max.

Trying to get my MacBook Pro to recognize external hard drive

Hey everyone. I'm fairly new to the forums but I've been a Mac user for almost 15 years now. Unfortunately, on the tech side of things, I'm mediocre at best so I have a question I wanted to see if anyone could offer a few suggestions or even a small glimmer of hope.
I have a LaCie Porsche Firewire based 160 GB external drive. It was mostly used for my G4 tower running classic OS. It apparently died all of the sudden (no trauma or anything..just wouldn't show up on my desktop). I took it and connected it to my MacBook Pro and it still wouldn't show up. On System Profiler, it wouldn't detect the type of drive or size and on Utilities, it wouldn't read at all.
Knowing LaCie, I thought it was the drive case (It's a seagate inside) so I got another external casing (a USB 2 type from Circuit City).
That failed to produce any kind of detection on the MacBook Pro as well. I have Disk Warrior but since it's not detecting, it won't recover any data. And I fear the worst at this point.
But if anyone has any suggestions as to how to get that drive to be detected, I'd be eternally grateful. I've checked the firewire and USB cords and they seem fine.
I have a G4 (digital audio) tower...can I try to install the drive INTO that tower and do a target mode startup?
Can I connect it via firewire to the tower and do a target startup from my MacBook Pro externally?
Should I try a different, particular external casing?
I'm willing to try anything before sending it out for data recovery. I realize it may be my only hope but I simply can't afford the service right now unfortunately.
Any suggestions...ANY suggestion would be greatly appreciated. I would be eternally grateful if I could somehow salvage even half of the files that are super important to me personally and professionally both.
Thanks in advance and a happy new year to everyone.

It's either the drive, the case, or both. Make tests to eliminate each factor.
I assume it makes the spinning noise, and it's IDE/PATA and 3.5" form factor, and it's formatted so all your machines (Classic, OSX) can see it.
-Yes, I would try another case. Some cases require the bare drive to have a jumper set to master, slave, or cable detect. There is no telling how yours come in the Lacie, or what a new case may require. At worst, you look on the chart on the drive case, and try all 3. I make a point of having a known good case, and I prefer Firewire. Look at Disk Utility when the case is connected and note whether it even sees a case connected (which has its own interface chip), even if a drive is not seen or mounted. Ditto with System Profiler.
-Yes, you can install it internally in your G4 tower. For purposes of seeing if it works at all, don't bother with Target Disk Mode, just connect it and see if it mounts on the G4. Again, be aware of the master/slave/cable select jumper setting required.
-It may be that the bare drive is blown. For most people, a data recovery service may be the only answer. Expensive.

System Profiler will not recognize installed hard drive if drive is in use by VMWare

System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
    Lion Client:
      Available: 217.84 GB (217,836,306,432 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
    BOOTCAMP:
      Available: 255.58 GB (255,575,560,192 bytes)
      Capacity: 319.79 GB (319,790,510,080 bytes)
      Mount Point: /Volumes/BOOTCAMP
      File System: NTFS
      Writable: No
      Ignore Ownership: Yes
      BSD Name: disk1s2
      Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
    Lion Client:
      Available: 213.39 GB (213,392,244,736 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD. When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk. Duh! The application for the home is in the mail.

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

I have macbook pro 13" I want to know how to copy files from my mac to the external Toshiba Hard Drive. I can't even delete files from my external hard drive. please help me my macbook HD is almost full and I have to copy my images to the Toshiba HD

To delete files from your external HDD, attach it to your MBP and drag the unwanted files to trash and then empty trash.
Then you select the files that you want to transfer by 'drag and drop' to the external HDD and trash the files on your MBP.
Ciao.

How do you back up a Mac Book Pro to an external hard drive?

How do you back up a Mac Book Pro to an external hard drive?

So you might also want to check this out in order to make a bootable drive of your computer:
http://macintoshhowto.com/repair/back-up-computer.html

Mac pro want recognize g5 hard drive

Similar Messages

Maybe you are looking for