Mac Pro whenever restart is always connceted - cannot turn it OFF

Hi,
I've always configured one the LOCATION in the Network Preferences to OFF (no ports selected).
It has been working fine with all of ours computers and OSX version since G3...
It works fine with our PBooks, G5 2.0 DP, but not with the brand new Mac Pro!
I've tried to delete preferences in System Configuration, re-set the Network Location, but when I restart or boot the Mac Pro it's always connected to our Isp Lan, not to internet by the way.
The Macs in our Studio are all connected to a Netgear Gigabit Switcher (lovely!), so I can see which is connected or not through the leds. We are connected to a Lan not to DSL 'cause is a fiber optic Isp.
Looking through this Discussion and Goggle I couldn't find a solution, anyone knows one?
Last but not least: I remember that I had a similar problem years ago when we bought a new G4, but I can't remember which solution we found to solve it...ouch!
Thank you in advance!

Hi BDaqua,
sorry for the late replay. No, I think is related to DNS responder or some other config file that is ran at boot time.
I'm pretty sure that has to do with it, because when i restart in the OFF location, the switcher leds show that the ethernet port is still connected on booting. And once logged, to make active the OFF location I have to switch to another location and then back to OFF one, at this point the ethernet port is really off, no leds on the port. But when I do that turnaround, in-between the led switch off then on then off definitively.
So it looks that when the MacPro boot doesn't care of the location that was set at shutdown. But it turns ON the ethernet ports ( I've tried with both 1 &2 ) anyway.
In fact if I use a Network utility or a Terminal command to see the configuration it tells that both are inactive but the one is connected has an IP address.
I was thinking to post a new topic just to ask to MacPro owners if they use an OFF Location and if it behaves differntly from mine.

Similar Messages

  • Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this

    Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book.  Cannot turn these off.  They repeat several times per session and every time computer is used.  How to diagnose this?

    First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Mac Pro is restarting itself

    Yesterday, my Mac Pro started restarting itself and giving me a message that there may be a problem. I'm not sure what to do, so I thought I'd share the Problem Report in case any of the more tech saavy people out there could spot the problem.
    I tried posting the Problem report here, but I got a "You Have included content in your post that is not permitted." So here is the Pastebin address:
    http://pastebin.com/embed_js.php?i=3UWFfXbi

    A page fault occurred in kerneltask. Drivers recently referenced include the caldigit driver.
    You are not running the Mac OS X kernel. You have added about 17 third-party add-ons, shown at the beginning of the list of kernel extensions, which are likely making it unstable.
    Pace app is a known bad actor that is installed with high-priced software. You will need to consult the manufacturer for removal instructions.
    Soundflower driver has been troublesome.
    you have drivers for both highpoint and caldigit and logitech cards. ¿ do you need them all?
    Something about the way you collected that panic log has it tagged in a formatted, numbered list. Perhaps you passed it through some other program rather than simply Copying from Console and Pasting with the forum software ?

  • Everytime i shut my mac down and restart i always find recovered files in my trash and I'm afraid to empty it even thou they are still in my docs folder too

    everytime i shut my mac down and restart i always find recovered files in my trash and I'm afraid to empty it even thou they are still in my docs folder too. Why does it do this? and will I delete files i have in my docs they look like same ones.

    If the Trash contains folders of recovered files

  • Mac pro 2014 restarting unexpedly

    Well. I just posted about this and Apple removed my post. I guess I put too much emotion into my post. So this time i'll shorten it:
    My $10,000 mac pro keeps restarting with no warning. Apple refuses to replace it or give me a refund. I am hurt. Anyone else having a unexpected restart problem with their mac pro 12-cores? 
    thanks
    c

    Hi everyone,
    and thanks for your responses... Let me try to fill you in w more details:
    Grant - No Kernel Panic... . no error message before or after it restarts, no nothing...
    Almost every time this has occurred i was doing something that uses heavy cpu.... either a) rendering in Aftereffects b) rendering in Cinema 4D c) batch outputting lots of video from quicktime 7 (converting prores to h264) and one single time... i was simply using photoshop... nothing crazy.... Most the times this has happened i had other apps open... Mail, Safari, other adobe products, spotify or iTunes...
    Thuhaib - No Firewire on the new Mac Pros... only peripherals plugged in are monitor... mouse, keyboard... ethernet, ethernet to server...
    Another problem i have (know idea if related) is that if Im using After Effects. and my computer goes to sleep... when it wakes up... the audio is no longer connected to After Effects... I have to reelect "built in audio out" in the after effects prefs... or simply (and faster) hit and restart aftereffects to get the audio routed back properly. This happens EVERY time it goes to sleep. I haven't noticed any other programs that lose audio routing settings... but i almost exclusively work in After Effects all day long.
    I have AppleCare. This was deemed a hardware problem in March. I brought it in and the cpu was replaced. However the problem has persisted. To my utter dismay... Apple will not replace my computer. I am a loyal customer of 15+ years.

  • TS3276 I have AOL on my Mac pro.I can receive Mail but cannot forward/send if I hit send the message goes to my outbox hit send it goes to

    have AOL on my Mac pro.I can receive Mail but cannot forward/send if I hit send, the message goes to my outbox

    Sorry Mate, I tried your suggestion ,but no joy.I now have 3 messages in my outbox,that will not send.
                                            Thank you for trying to help.
                                                                                   Ken.

  • Re: My Mac Pro spontaneously restarts

    My Mac Pro spontaneously restarts too!!!
    I have Mac Book Pro 2.8 Ghz Intel Core 2 Duo, 4 GB 1067 MHz DDR3, and run Mac OS X 10.6.8 (Darwin) purchased late Nov 2009; For the past 2 weeks it started spontaneously restarting itself. I don't have an apple care. Anybody was able to resolve this problem? My computer restarts about 2 -3 times a day and mostly when I am not arround. Any help would be greatly appreciated!

    Same here happens wd me on my MacBook Pro early 2011 after the 10.8.5 update even after the supplemental update.
    If u are not using 10.8.5 then please run a Hardware test on ur mac with the dvd that came with it and if ur hardware is corrupted then it will display an error code note it down and go to the Apple Service Center.

  • Why does my Mac Pro spontaneously restart?

    My Mac Pro suddenly restarted and continues to do so when I sign back in.  I can't use it more than five minutes without a spontaneous restart. I put in the OS installation disc and manually restarted from it and then went to disk utilities to repair my startup drive.  Did this and nothing changed. Still continues to restart again and again and again.  I'm trying to back up on external drive but that takes time and the computer restarts a few minutes into the backup procedure interrupting it.  What can I do?
    Thanks

    There are so many replies, I don't know if anyone has solved this, but I have found something that has worked for me, twice, on my Mac Pro Tower 2008, OS 10.6.8. Like everyone else, my Mac was restarting by itself over and over. Here's what I did: 1) Clean up the dust inside (canned air and wiping down the flat surfaces that had a ton of dust on them. 2) Remove the video card and reseat it. Pulling the card out can be a bit of a trick, it can seem stuck, but you just have to pull firmly (ok, don't forget to unscrew the little screws that hold it in, and don't drop 'em!). Just pull it 'up' a few inches away, enough to pull it free of the contacts.
    I suggest immediately reseating it, rather than pulling the card out to inspect and then realize that re-positioning it is awkward, especially if you haven't pulled the vid card before. Old pros can ignore this recommend.
    This worked for me a few years ago and just recently (Late April 2015) the problem resurfaced. I can't say that cleaning did the trick, but it was awfully dusty inside my Mac anyway.  Perhaps related (or not!), I've replaced my video card twice now, so I'm on my third vid card. They just don't seem to last.
    I don't guarantee anything, but if you haven't tried this, give it a shot and best of luck to you!

  • My Mac Pro all of a sudden would not turn on. It beebs 3 times, pauses, and then does it again. I don't think I have downloaded anything recently and I don't know what to do!

    My Mac Pro all of a sudden would not turn on. It beebs 3 times, pauses, and then does it again. I don't think I have downloaded anything recently and I don't know what to do!

    3 beeps usually means a Ram problem, have you added or removed Ram recently?
    And I will assume that you do not have a Mac Pro, but that you have a portable, a MacBook Pro.

  • When I activated VoiceOver, capital s was used to start reading.  I cannot turn it off so as to be able to use capital s in ordinary utilities (Word, textedit..)  Restarting did not help.

    When I activated VoiceOver, capital s was used to start reading.  I cannot turn it off so as to be able to use capital s in ordinary utilities (Word, textedit..)  Restarting did not help.

    Hi, benson -
    If it is a matter of VoiceOver being turned on when you press Shift-S, you can change the keyboard command key combo for that. Open System Preferences, select the Keyboard item. In the new window, click the Keyboard Shortcuts button.
    In the left list, click Universal Acess. In the new list on the right, be sure the last item, "Turn VoiceOver on or off", is checkmarked, then click the command-key setting on the right of that line. A small text box will open - enter the new command-key combo you wish to reset it to.
    Suggestion - the original setting for that is Command-F5 (that's the number 5, not the letter S). Unless you have a particular need to use Command-F5 for something else, I would reset it to that. If you do need to set it to something else, include the Command-key as part of the combo - doing so prevents accidental activation when using routine keyboard strokes.

  • Hi, my ipad mini has suddenly stopped working and I cannot turn it off or connect it to the computer, can anyone help me on this??

    Hi, my ipad mini has suddenly stopped working and I cannot turn it off or connect it to the computer, can anyone help me on this??

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPhone, iPad, iPod Touch: Troubleshooting Touchscreen Response
    http://support.apple.com/kb/ts1827
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT204053 My ipad homescreen hang, i cannot turn it off either, what should i do?

    My ipad homescreen hang, I cannot turn it off and all apps are not showing just the wallpaper.what do I need to do?

    Welcome to the Apple Community gms3.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

    my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

    christobell86 wrote:
    ... it will not restore my phone as i have got the app find my iphone switched on.
    You can access iCloud.com on a computer to turn it off.
    http://support.apple.com/kb/PH2702

  • I've just upgrade my ios 5.1 to ios 6 but my ipod is now hanging up and i cannot turn it off even i follow the troubleshooting procedures. What should I do? I don't know what is the problem.

    I have problem with my Ipod touch when I upgrade it with ios 6. I cannot turn it off. I have alrealy followed the troubleshooting instructions to press both the off/sleep button and the home button but still it will not turn off. I cannot use my ipod anymore for it is just hanging up.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • HT1688 Is there any way to set password to protect the location service, to keep GPS open? so, the theft cannot turn it off so easy, because once the location service is turn off, all GPS track is useless...

    Is there any way to set password to protect the location service, to keep GPS open? so, the theft cannot turn it off so easy, because once the location service is turn off, all GPS track is useless...

    That is what Activation Lock of iOS 7 does
    In addition, it renders the iPhone totally useless to anyone who doesn't know your Apple ID and password.
    Allan

Maybe you are looking for

  • Error on start node

    When I start my nodes I have this error: <Nov 15, 2011 11:21:17 AM BRST> <Error> <Cluster> <BEA-000110> <Multicast socket receive error: java.net.SocketException: Socket closed java.net.SocketException: Socket closed at java.net.PlainDatagramSocketIm

  • Can I download for free again a paid app that I hidden?

    I downloaded mini ninjas and I hided the game. Now I want to download it again. Do I need to pay for it again?

  • How Do I Network?

    I have a Macbook Pro (OS 10.4.7) and an Apple G4 running OS 9.2. Both are connected wirelessly to the Internet through an Apple Airport Express base station. The G4 has its own set of accessories and equipment, including a printer, flatbed scanner, f

  • Spry bar sub menus not working. Am at wit's end.

    Hi all, I am having trouble with getting my submenus on my spry bar to function. At first I was getting the error message of spry undefined.  I looked for answers in forums, and tried a few things like making sure the .js file was there, looking for

  • Problem executing the Query.

    Hi, When I am trying to open a Query in the Query Designer I am getting the error, like Error Characteristic BP in Ext.Sys (BPCo) must be uniquely selected in the query Error Characteristic BP in Ext.Sys (BPEmp) must be uniquely selected in the query