Mac Pro will not sleep

As requested, this is a new post from the "my mac will not wake up" thread.
I am having trouble putting my Mac to sleep. When I try to enter sleep mode, the fans make noise like it wants to restart, then the monitors go out and immediately back on. It wont stay in sleep mode.
Ned Snowing seemed to have a pretty good idea of what the problem might be. Ned, can you please follow up from the other post? I think we might be on to something.
Also, I have a seagate 300gb HD installed in bay two, if that factor is relevant.
Mac Pro 2.66Ghz   Mac OS X (10.4.7)   2GB RAM ATI X1900 Dual 20" Dell Widescreen Monitors

I've got a Mac Pro and this is what I see when my Mac sleeps... BUT... I don't see anything when it tries to sleep and doesn't... or rather, when it is supposed to sleep...
Dec 28 10:52:29 Justins-Cool-Mac-Pro kernel[0]: AFPSleepWakeHandler: going to sleep
Dec 28 10:52:29 Justins-Cool-Mac-Pro /etc/rc.sleep: executing .sleep of user justin
Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image path: /var/vm/sleepimage
Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ec -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x45e1
Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ed -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0

Similar Messages

  • Mac Pro will not sleep properly after installing new SATA BD-CD-DVD drive.

    Hello and thank you in advance for time reading this.
    I have been using a Mac Pro for 4 years and it never happened to me before.
    This started almost immediately after installing a new SATA BD-CD-DVD Drive.
    When the Mac is ordered to sleep, It shuts down 3 out of 4 Hard Drives
    (I guess the one that doesn't is the OSX Drive) and It will not shut down the fans
    and the display has no signal.
    During that (when it won't sleep completely) the Mac is completely paralysed and it's unable to wake up.
    Now, I've tried being patient and giving the Mac a ton of time to sleep.
    In some cases it actually worked and the Mac did sleep completely and it was able to wake up,
    but that defeats the purpose (being able to sleep and wake up in an in a few seconds).
    In these few cases, the Mac took about 30 min to sleep.
    In the rest of the cases the Mac never slept and I had to emergency shut it off from the power button.
    In simply words, Mac falls into a "coma", not asleep but not awake at the same time.
    As I said, this started exactly when I installed an SATA LG CH10LS20 optical Drive.
    You may say that the Mac Pro does not support SATA for optical Drives.
    This is why you should know that there is a SATA port on the motherboard of a Mac,
    and with the correct method you can connect a SATA Drive AND be able to use it with out additional drivers.
    http://www.tomorrowland.com/guides/mac-pro-optical-drive-install-part-1/
    Now, you may say that If I'm so sure that it's the new drive causing the problem, why don't I disconnect it?
    Well, please try to understand me, it's an all new drive and it cost a good load of money...
    and other users of the same drive do not have that problem... yet...
    Is there a way for the drive (which otherwise works fine) and the Mac to coexist and work properly?
    Do you really think it's the new Drive?
    Is the motherboard bothered somehow by the new drive and wont go to sleep properly?
    Any kind of help is welcome and
    I thank you in advance if you can help me.

    Thanks for taking the time to respond RedBaron, I don't have a USB aircard in this system but I do have numerous firewire drives. I haven't unplugged everything yet and restarted. That's a good tip. I think I will try that to see if that is the problem.
    Thanks again
    Chris

  • Since Snow Leopard, Mac Pro will not sleep with Apple wireless keyboard

    I have an odd problem, now on 2 Mac Pro (Nehalem) with 10.6.1:
    Since Snow Leopard, the system will not sleep as long as a) the user is logged on (any users/profile) and b) the Apple aluminum wireless keyboard is 'attached'.
    If I log off first, sleep works fine. If I turn the keyboard off first, it's fine. But if hitting 'sleep' when logged on, the screen turns dark, sleep process begins, but the system comes right back (with a note 'keyboard disconnected'.
    It's as if the keyboard disconnects after sleep, but the system still monitors it, and wakes up.
    Note: Wake for bluetooth devices IS NOT ENABLED!
    Here is the console log (relevant info):
    10/18/09 4:57:33 PM kernel System Sleep
    10/18/09 4:57:48 PM kernel Wake reason = UHC1
    10/18/09 4:57:48 PM kernel System Wake
    10/18/09 4:57:48 PM kernel Previous Sleep Cause: 5
    10/18/09 4:57:48 PM kernel USB (UHCI):Port 1 on bus 0x1d has remote wakeup from some device
    10/18/09 4:58:53 PM kernel System Sleep
    10/18/09 4:58:55 PM kernel Wake reason = UHC6
    10/18/09 4:58:55 PM kernel System Wake
    10/18/09 4:58:55 PM kernel Previous Sleep Cause: 5
    10/18/09 4:58:55 PM kernel USB (UHCI):Port 1 on bus 0x5a has remote wakeup from some device
    Does anyone have any idea? While on, the keyboard never disconnects - i.e. I don't have any other issues with BT or the keyboard (this is the 2nd I tried).
    Also, my apologies for double-posting this earlier in a different forum; cheers!
    Thanks,
    Dan

    Hi,
    and thanks for posting that.
    That's too bad. I am probably going to log off if needed, rather than going wired, but I can't believe that this might be more prevalent than just me and there is no 'fix'...
    Anyone ?!
    Thanks as always,
    Dan

  • Mac Pro will not sleep after reboot from Win 7 into OS X

    I have the same problem as mentioned in this short thread; http://discussions.apple.com/message.jspa?messageID=11410973
    Does anyone have any more information on this?
    The problems started (I think) after I replaced my Nvidia GT120 with a ATI Radeon HD 5770.

    I've got a Mac Pro and this is what I see when my Mac sleeps... BUT... I don't see anything when it tries to sleep and doesn't... or rather, when it is supposed to sleep...
    Dec 28 10:52:29 Justins-Cool-Mac-Pro kernel[0]: AFPSleepWakeHandler: going to sleep
    Dec 28 10:52:29 Justins-Cool-Mac-Pro /etc/rc.sleep: executing .sleep of user justin
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image path: /var/vm/sleepimage
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: sizeof(IOHibernateImageHeader) == 512
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
    Dec 28 10:52:31 Justins-Cool-Mac-Pro kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ec -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x45e1
    Dec 28 10:52:32 Justins-Cool-Mac-Pro kernel[0]: Intel8254x -- Link down -- 00:17:f2:01:83:ed -- called by disable() -- Auto-Neg Advertise Reg (04d) = 0xde1, Link Partner Ability Reg (05d) = 0x0

  • 2009 Mac Pro will not sleep from set prefs

    Hi all:
    I've got a 1 YO Quad, 2.93 Nehelam that wont sleep on set schedule. It has been doing this sense last week. I get the P-RAM, unplugged everything (even power), re-plugged everything, repaired my drive with disc utility, erased start up items, everything.
    It WILL sleep on Q but not on a schedule in energy saver prefs. The only thing thats different lately is that Installed CS5 Master suite and Apple's latest audio update (which fixed my audio by the way...)
    Any idea's.
    Thanks---Seattle

    Is this question in the correct discussion? I thought this was the discussion for Mac Pro (previous to 2009). This could be a problem that appeared in the 2009 Mac Pro line ... or it could be related to the OS you are running.

  • 2010 mac pro will not sleep

    2010 Mac Pro 10.6.8 recently will not go to sleep. Will awaken without reason when it is put to sleep with menue command. Tried resetting system management controller and PRAM to no avail. Any suggestions?

    Look at the kernel log for  a line that says "Wake reason".  You will see a code to the right indicating the wake reason.  Look here for the meaning of the codes.  Perphas that will give you a clue as to why you machine is waking up.

  • Mac Pro will not sleep in Lion

    I know, there are plenty of threads dealing with sleep issues, but they get confused with all sorts of different situations, so I'd like to present my very specific problem with the hope that someone will have a bright idea about what I might try to solve it.
    As the title states I am running a Mac Pro and Lion.  I've been running from my Snow Leopard partition for several months because I couldn't solve this problem, but today I decided to have another go at it. Under Snow Leopard, there is no problem with sleep.  Under Lion,the computer will sleep via power button, menu, or keyboard shortcut, but absolutely refuses to sleep via energy saver settings. I have:
    1. Reset PRAM.
    2. Rest SMU.
    3. Fixed prefs.
    4. Cleared all print queues.
    5. Turned off all sharing.
    6. Trashed SystemConfiguration folder.
    7. Checked Console logs from any strange activities (nothing)
    8. Ran pmset -g (nothing shows preventing sleep)
    I tried PleaseSleep, but I don't like it as a solution because there are too many programs that I would need to exclude (EyeTV, Audio Hijack, HandBrake, etc.), so the machine would remain awake a lot of the time anyway. Is there anything I've missed here?

    Try reinstalling.
    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • My Mac Pro will not go to Sleep

    My Mac Pro will not go to Sleep.
    I have it set to 15 Mins in Energy Saver.
    After 15 mins no sleep.

    Alot of people have had the same problem including me. Here's a link to the thread reguarding this particular issue http://discussions.apple.com/thread.jspa?threadID=1847877&start=0&tstart=0.

  • Mac book pro will not sleep after i installed mavericks

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

  • Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Apps store icon no longer available, book shelf will no longer access the store, and my mac pro will not sinc apps with my iPad.  What's up??  How do I correct?  This is after upgrading to iOS6 and Mountain Lion.

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • 2009 Mac Pro will not boot up under Windows

    I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it.
    However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
    My question to the community is, does anybody know why this is happening and is there a known fix for this? Quite frankly, having to disconnect a monitor just to restart is very tedious and frustrating. 
    I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads.
    If anyone knows of a fix or what to do in this situation, or if you are also having this issue, I would love to hear your input!
    Thank you!
    For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same.
    The system passes all ASD testing.
    The full specification of the computer and all connected equipment are as follows:
    2009 Mac Pro (4,1) 8-Core
    2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
    16GB DDR3 ECC 1066MHz RAM (Apple Branded)
    Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
    4x 2TB WD Black Hard drives for storage.
    Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).

    In Windows I am using the latest (12.4) Catalyst Software Suite, 64 bit of course, downloaded directly from AMD's site after installing the drivers from Boot Camp.
    As for installing Windows I used an original (not burned) installation media (Disk is in a pristine condition). And yes, Windows is fine, the problem just seems to be getting the system to boot up Windows with that second monitor. However if the "problem monitor" is disconnected the system boots fine 100% of the time and connecting it later after booting the system will still operate properly.
    For the sake of arguement I swapped monitor cables and connected the "second" monitor to the mini displayport adapter to verify that it wasn't a cabling issue and I'm still yielding the same issues.
    As for GPU testing, I've played games (Crysis, Grand Theft Auto IV, Battlefield 3, etc.) and I've had no issues with the card or stability.
    You would think that Apple would try to find a fix for this, especially considering the caliber of this machine.

  • Mac Pro will not find boot volume

    Hello,
    My Mac Pro will not find it's boot volume. Each time the computer is started, the blinking folder with the question mark is the result. A working install of 10.7 does exist on the machine's primary hard drive. If  I were to press the option key on boot, I can select the primary hard drive (after entering the password) and everything boots as normal. I have run TechToolPro on the volume with no detected errors, even after a volume rebuild. A Recovery HD partition is not on the boot volume. Should that matter?
    I really really do not want to reinstall Mac OS X. I have hundreds of gigabytes of data in question. Any reinstall/reconfig would take days to complete.
    Thanks

    So you are saying that setting the default in Startup Disk doesn't work?
    And you have not got or been using Carbon Copy Cloner or another to provide working bootable backup?
    You should have Lion Recovery on one of your drives, do a clean install.,
    I assume TTPro media scan turns up no errors.
    MOVE all your data OFF the boot drive. Keep the system OS and apps on its own drive.
    Clone the system. Use TimeMachine and cloning for backup.
    And how is the pram battery?
    Any time you zap pram you lose the default and it will look for it like you see starting with SATA0 (bay 1)

  • 16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

    16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

    Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My new Mac Pro will not recognize my old Canon video camera

    My new Mac Pro will not recognize my old Canon video camera

    We've used the 400 to 800 firewire cables with limited success in the past...dropped frames was the main problem. Only used them until the Sonnet FireWire PCIe Card came in to allow a 400 firewire.

  • HT201364 My Mac Pro will not upgrade past 10.7.5 Now what?

    My Mac Pro will not upgrade past 10.7.5 Now what?

    No, it is not possible. I have an early model, too, that now sits in a corner. I replaced it at the time with a mid-2011 iMac. The only less expensive route than a new computer is a used/refurbished model, but were you to go that route stick to a 2009 or later model MP.
    Surely your business can afford £2500 for a necessary asset. It's depreciable for tax purposes if your tax system allows that. Just ask yourself how much it would cost your business if you did not have a computer. And, consider, if you really need to get a new computer assuming the one you have is still working. Keep it and start putting away enough from your business revenue to buy a new computer later. It's a required part of business planning.

Maybe you are looking for