Mac Pro with Apple Raid Card - 1 drive OSX (JBOD) + 1 drive Vista?

Can anyone walk me through what I'd need to do to set up an early 2008 model Mac Pro with the Apple Raid Card pre-installed and 2 500 gig drives, so that I can have OSX on the first drive and Vista on the second?
I know it defeats the purpose of the raid card, but...
What I've done so far is:
1. Removed drive #2
2. Install and using Raid Utility, add the first drive as a JBOD set/volume
3. After install, shut down the machine
4. Re-add drive #2
5. Restart
6. Use disk utility to add drive #2
I tried to use bootcamp, but it only wants to put windows on the first drive - which won't work because it is RAID.

Run Vista off an ATA interface in the 2nd optical drive. There is an SATA 2 ATA adapter.
I think you can boot Vista off some RAID controllers, check out Highpoint RocketRAIDs. Should be able to configure the RR.
Boot Vista off USB is a stretch.

Similar Messages

2010 Mac Pro with Apple RAID card - "Drive carrier 00:03 removed"

I've got a 2010 Mac Pro with the Apple RAID card and 4 internal identical Seagate ST32000641AS 2TB drives inside.
I've never had a problem with the RAID card (either battery or in operation) except for one thing:
Almost every time I shut the machine down (which I try to do as rarely as possible), it keeps losing Drive 3, the spare.
(See RAID Utility event log snippet below.)
[I wish I could understand why this Apple RAID card keeps losing the spare across power-cycles/reboots, but I digress.]
So I just adopted it as the spare and it spawns the rebuild and many hours later, everything's fine again.
... until the last time I rebooted (Jan. 2nd).
After the usual "I lost the spare" message upon login, it began the rebuild.
But this time, about 11 1/2 hours later the rebuild stopped and RAID Utility reported "Drive carrier 00:03 removed".
Bay 3 is now missing in the Controller view.
I powered off the system last night, and left it off overnight. Today I took all the drives out, blew the dust off and reseated them.
Same thing. Drive 3 is still missing, and now the rebuild task aborted.
The drive bay location shouldn't matter, right? Can I swap the Bay 3 drive with the Bay 4 drive?
I figure one of two things would happen:
(1) It will report Bay 3 as being there but Bay 4 as being missing, same situation as is now. Meaning the problem is in the Bay 3 spare drive.
(2) It will report Bay 3 as being missing (despite a 'good' drive being present) and Bay 4 will be the (unattached) spare, and the RAID set will be unviable. Meaning the problem is with the drive bay itself, not whatever drive is plugged into it.
If "Drive carrier removed" is trying to tell me the disk is bad, why do I not see any log messages about it? I suppose a spare that never gets used could go bad from lack of use, but ... no messages at all?
Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
% sudo raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Event log snippet:
Saturday, January 11, 2014 8:15:19 AM PT
Background task aborted: Task=Rebuild,Scope=DRVGRP,Group=RS1
informational
Friday, January 3, 2014 3:50:28 AM PT
Drive carrier 00:03 removed
informational
Thursday, January 2, 2014 4:29:37 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, January 2, 2014 4:29:28 PM PT
Adopted drive in bay 3
informational
Thursday, January 2, 2014 4:28:34 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Saturday, December 7, 2013 5:35:17 PM PT
Marked drive in bay 3 as a global spare
informational
Saturday, December 7, 2013 5:35:08 PM PT
Adopted drive in bay 3
informational
Saturday, December 7, 2013 5:34:11 PM PT
The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
warning
Saturday, December 7, 2013 5:34:03 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Friday, December 6, 2013 4:56:47 AM PT
Battery finished conditioning
informational
Thursday, December 5, 2013 9:53:44 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Friday, September 6, 2013 10:53:11 PM PT
Battery finished conditioning
informational
Friday, September 6, 2013 3:41:33 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Saturday, June 8, 2013 3:41:35 PM PT
Battery finished conditioning
informational
Saturday, June 8, 2013 8:37:49 AM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Thursday, May 30, 2013 4:09:51 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, May 30, 2013 4:09:42 PM PT
Adopted drive in bay 3
informational
Thursday, May 30, 2013 4:08:59 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Thursday, May 30, 2013 3:32:29 PM PT
Degraded RAID set RS1
warning

Power Pig wrote:
"Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
I was talking about this.
This looks like a RAID 5 setup without the parity to me. I would said it basically a RAID 0.
Also you metioned "I guess that previous spare must really have gone 'bad', despite having never been used! "
I wiped everything out, I selected the 3 disks and clicked on "Create RAID Set" with RAID5 selected and the "Use unassigned drives as spares" option checked. The 3rd disk has always been marked as the spare ever since then. You do not have a choice to create a "RAID5 setup without the parity". If I wanted a RAID0 I would have chosen a RAID0! raidutil now says
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,3,4    5.23TB    0.00MB No tasks running
Every time the system would 'lose' Drive 3 on boot, I would just keep rebooting until it was 'found', and then manually re-assign the now-'floating' drive as the spare - and the RAID would rebuild.
There was never a problem until the day that prompted this post - when it would not find Drive 3 no matter what I did. I turned the Mac Pro off for several hours until the drives had all cooled down and it still did not find the drive. I left the machine on but unmounted the degraded volume until I got the new replacement drive.
I really don't understand what you are getting at. It's like you are trying to tell me I set it up as a 4-drive RAID5 with no parity(!) and that I was in grave danger because one of the disks was gone. The actual RAID contents (spread across Drives 1, 2 and 4) were never in danger, unless a 2nd disk had failed while the spare was not seen by the Apple RAID card. I wasn't too worried about that happening.

Windows and Mac Pro w/ Apple RAID card

It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
So, i've connected SATA drive this way and it works fine with OS X.
But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

I've tried that.
Installation and booting of WinXP passed OK if RAID card removed.
But i've got black screen again trying to boot WinXP after RAID card re-installed.

Mac Pro with no airport card installed

I have a Mac Pro with no airport card installed....Can I just purchase an Airport express and connect by ethernet to the Mac pro.... I use Air port Extreme as my router for other computers

Yes, this is referred to as a ProxySTA in the business.
HOWEVER, this only became available with the 802.11n Express. I haven't yet seen it OFFICIAL if the new second generation still supports ProxySTA. I'm a bit hesitant to say yes, because the new express leans a little closer to the Extremes which work quite differently. (haven't had time to test this yet myself)
I'm curious, why you don't just run an ethernet from your extreme to your Pro... I'm guessing because of the distance?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

MAC OS 10.7.4 3.2GHz Quad-Core Intel Xeon processors, 12GB of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

OS drive + RAID 1 with Apple RAID card

I have a G5 Xserve with the RAID card and three ADM drives. How do I set up Megaraid to have a single non-raid drive and a RAID 1 mirror? I installed the OS onto one of the drives after a "destroyconfig". When I create the RAID with drives 1 and 2, the drive 0 is lost. THe only way I found to make it work was with a soft RAID 1 in disk utility.

How do I set up Megaraid to have a single non-raid drive and a RAID 1 mirror?
I'd go with not connecting one of the drives to the RAID card.
When you installed the card you replaced three short SATA cables with three long ones - one per drive.
Just replace one of the long ones with one of the original short ones. This will reconnect one of the drives back to the motherboard, leaving two drives connected to the RAID card.
Kind of a hack, for sure, but in lieu of having a JBOD mode in megaraid it seems like the simplest solution.

Configuring my new Mac Pro with a RAID solution... Help appreciated!

Hi, I am about to purchase a new Mac Pro to have in my studio.
One of my unresolved features is what to do with storage. Currently I am considering either: (a) the Apple internal RAID card with 4x500GB 7200 RPM drives; or an external G-Technology G-Speed eS also with 4x500GB 7200 RPM.
In either of these cases I would have an additional external drive of 1.5TB (pretty much the available storage I should have from the RAID), to perform back-up and take off-site.
Questions:
(1) Anyone has experience with Apple's Raid Card? Better or worse than an external solution?
(2) Any feedback on the storage from G-Tech? I have a few mini drives with great success.
(3) Any suggestion on RAID vendors (beyond what I am considering)?
Thanks so much!

I'm also planning to upgrade to a new Mac Pro, and just waiting for newest Intel "Penryn" processors:
http://buyersguide.macrumors.com/
Having eSATA ports for external eSATA drives would be great.
I will go with a RAID, but haven't decided on the configuration - I'm thinking of having 3 or 4 drives in RAID 5; I perceive a benefit in going with the Apple RAID card rather than a cheaper third party card - it's designed to work well with the Mac Pro and with Apple Care you'd get warranty coverage. Can't decide if it's better to save money and buy drives from a third party (and maybe end up with them not covered by Apple Care), or to pay more and get the drives with the machine.
I got burned many years ago by four failed IBM 75GXP hard drives, so I think choosing a reliable hard drive is very important; I'll probably go with a Seagate Barracuda 7200.11 or Hitachi Deskstar 7K1000. Great info here:
http://www.storagereview.com/1000.sr
Good RAID tests results:
http://www.macintouch.com/reviews/macpro/followup.html
And I think this is required reading too:
http://manuals.info.apple.com/en/RAIDUtility_UserGuide.pdf
Ron

Mac Pro with software raid and upgrading to Snow Leopard

Not sure if anyone else has experienced this but here goes. I have a mac pro with 4 500G drives using the onboard software raid. When I insert the Snow Leopard disk and try to install, it fails to find the raid. Is there a trick to get this to work?

Thank you SSSOOO much Greg818. I was pulling my hair out over this problem. I even went so far as to do a full Leopard install with Snow Leopard update on a USB drive and them cloned it over to my RAID 0 array using SuperDuper hoping that this would solve the problem. It seemed to in the sense that the clone went fine but then when I would try and boot from the array I would get the Apple Logo and spinning wheel but it just kept spinning and spinning until finally the Apple logo was replaced by the Do Not Enter symbol(you know the circle with the slash through it).
So came here and found this thread. Your solution worked like charm!!! Once again thank you so much... you saved me from being bald.

How can I force the Disk Cache on with Apple Raid Card?

I have an apple raid card in my mac pro that has now had it's battery fail twice. I don't really want to keep putting money into this and would rather just force the disk cache on and hope my UPS works, I don't use this box for real work anymore anyway and it's all backed up.
There used to be a force on button next to the Write Cahce Status section, but that seems to have gone away. Does anyone know how to force the cache on? Permanently if possible.

OK, Command Line fun, use at your own risk:
sudo raidutil modify controller -E

Creating a wireless connection on a Mac Pro with no airport card.

Hello
Forgive me if this has already been discussed but I am looking at all options to add wireless function to a mac pro with OS10.4 that does not currently have an airport card installed. My options so far are to either purchase a airport card, purchase a USB wireless dongle i.e.: D-Link DWA-140 (for which I am having trouble finding something that is compatible) or possibly using a airport express. The objective is to use it for presentations for lectures as I am using keynote and would very much like to use the keynote remote from my iPod touch (later with a iPad) so I can control my presentation wirelessly.
My question is this, will I be able to use an airport express, connect it via ethernet to the mac pro and create the wireless connection with my iPod touch? Will I require a wireless router? Or can anyone suggest an easy way to wireless control a keynote presentation with a non wireless mac.
Thank you so much.
Dave

This is not an exact answer to your question, but we had cable installed today (Virgin Media, UK) and the router is too far for my MacPro tower to connect. The engineer gave me a wireless dongle (the D-Link DWA-140) and said it would do the trick. After a few hours of searching online, I cannot make the dongle connect to the router, so I would recommend that you avoid this option for a MacPro. It may be possible to connect it but I'm certainly not finding it straightforward.

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

Will Apple be updating the Mac Pro with updated graphic cards such as the Nvidia GTX 680?

Hey Apple! And a big Hello to the Apple community!
I'm looking to buy my first Mac Pro and i'm very excited about it!
I haven't bought it yet because i'm waiting for Apple to upgrade their current graphics cards that are available in the current line up.
The ATI Radeon HD 5770 or the ATI Radeon HD 5870. Altough they are very good graphic cards, I feel that they are very outdated.
Would there be any chance of Apple upgrading their current line up to Nvidia GTX 680?
Thanks again in advance!

Hope springs eternal:
GTX5xx GPUs
GTX580 3GB running in 10.7.3.
Card shows EFI boot screens on either DVI port.
Also have GTX560 going. Will announce GTX570 separately.
Requires external PSU, but this GTX580 kicks AMD/ATI 5870 to curb, leaves for dead, and never looks back.
http://forums.macrumors.com/showthread.php?t=1360927

How can I set up a Mac pro with internal Raid 5

I have a Mac pro running Leopard server. I would like to format 3 of the drives as an internal Raid 5.
Can this be done?
Can it be done without an internal Raid card?
or
Can it be done if I install a Mac Pro Raid card?
Thanks,
RT

RAID5 or RAID10 or such does require add-on software and / or add-on hardware, yes.
And I'd tend to go toward external RAID storage here, as that is what the most common packages offer and as that tends to have the greatest expansion. This would involve a PCIe RAID controller and external storage here, though Apple does offer the Mac Pro RAID card for use with the internal drives.
The integrated Apple software RAID has RAID0 and RAID1 capabilities. Not RAID5.
As for any additional questions, here's [the FAQ|http://support.apple.com/kb/HT1346] for the Mac Pro RAID card, and here is [the manual|images.apple.com/server/docs/RAIDUtility_UserGuide.pdf].
External RAID can involve Apple Xsan and Promise and related, or third-party FC SAN storage, or any of various third-party direct-attach storage (DAS) options.

Dead 2008 Mac Pro with Soft Raid - Diagnostic Ideas?

I'm starting to run out of ideas how to diagnose and fix my 2008 (March) Mac Pro: Dual quad-core Xeon, 2.8GHz with a 2TB four-HD soft RAID.
I think it died of a bad or partial or otherwise failed update of Mavericks. Since Mountain Lion, I think it was, soft RAIDs no longer support Recovery Disk partitions, but I have a Recovery Disk on a USB thumb drive, created on my MacBook Pro running Mavericks. The MacBook Pro can boot from it, so I'm confident that it was created successfully, but no luck booting from it on the Mac Pro.
Below is what I've tried along with the results I got, pretty much in chronological order. Any of you have any other ideas?
Experiment
Result
Normal boot from soft RAID
There's frame-buffer-memory garbage (largely quasi-random noise) at the top of the screen. The grey Apple logo came up offset to the right of the screen, with the spinning thingie below it. That spinning thingie (I forget what it's officially called) spins for about the right amount of time where it would start drawing the desktop, but instead it freezes up, and then I start seeing flashing orange stripes on the screen. The disk keeps cranking for a while.
Powering up in target-disk mode, over Firewire
Works normally, and I in fact successfully backed up the RAID that way to a 2TB USB drive, using the MacBook Pro.
Zapped the PRAM, then normal boot from RAID
The only change was that there is less frame-buffer-memory garbage at the top of the screen, and the Apple logo and spinning thingie is now centered again. Other than that, the failure to boot happens identically.
Boot with option key down and Recover Disk USB thumb drive in the front USB (on the Mac Pro itself; no USB hubs intervening).
It boots up showing icons for each of the four disks of the RAID, but does not show the recovery disk. (Doing the same on the MacBook Pro does show the recovery disk, and I am able to boot from it on the MacBook Pro.)
Booting with C, since I gather that that could also tell it to boot from a USB drive.
It did not boot from the USB drive.
Booting with D, to try to get it to run hardware tests.
No effect; still fails to boot in the usual way.
While connected to the MacBook Pro in Target-disk mode, running Disk Utility looking for disk problems.
No problems found. I have a Mavericks version of DiskWarrior on order. Should be here in a day or two.
I haven't tried any network boots, since I don't know of any network drives to boot from, and I'm not sure if it would do any good anyway.
I really doubt if this would work, but one ... conceptual ... way to replace the OS on the RAID might be to connect the RAID, via target-disk mode, and buy (again) Mavericks (or Yosemite?) from the App Store, and then tell it to install it on the RAID rather than the MacBook Pro itself. The problem with that, I imagine, would be that after loading it onto the RAID, it would presumably perform an installation appropriate to the MacBook Pro rather than appropriate to the Mac Pro. So, I'm not desperate enough to try that yet...

Just how did you create the recovery disk on the thumb drive? Maybe it is unique to the laptop.
"but I have a Recovery Disk on a USB thumb drive, created on my MacBook Pro running Mavericks."
If y can download the Mavericks installer on your laptop y can make a Mavericks bootable installer with
http://liondiskmaker.com/

Is there a fix for MAC Pro with Dual video cards that randomly logs off and on?

From my readings on the Internet this seems to be a know problem. That even furthers my frustrations with the latest OS X upgrades. So far on both my MACBOOK PRO and my MAC PRO it has been a major downgrade as both systems are no longer stable. Enough with my complaints...
Is there any plan to address this problem with the MAC PRO? I can't believe 10.8.1 didn't fix it. More can be read on it at:
http://jvm-technology.blogspot.com/2012/08/mac-pro-users-experiencing-random-log .html
Does anyone have work around to use dual screen monitors with the system? I have two video cards, the article says to remove one. Has this worked for anyone? Can I use dual screens with the one video card. Before I go messing around with these type of things I just want to be sure that this is a real fix. For the price of the cards and the system I really can't believe apple has this issue in the first place and has not fixed it.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Mac Pro with Apple Raid Card - 1 drive OSX (JBOD) + 1 drive Vista?

Similar Messages

Maybe you are looking for