Mac Pro with no airport card installed

I have a Mac Pro with no airport card installed....Can I just purchase an Airport express and connect by ethernet to the Mac pro.... I use Air port Extreme as my router for other computers

Yes, this is referred to as a ProxySTA in the business.
HOWEVER, this only became available with the 802.11n Express. I haven't yet seen it OFFICIAL if the new second generation still supports ProxySTA. I'm a bit hesitant to say yes, because the new express leans a little closer to the Extremes which work quite differently. (haven't had time to test this yet myself)
I'm curious, why you don't just run an ethernet from your extreme to your Pro... I'm guessing because of the distance?

Similar Messages

Creating a wireless connection on a Mac Pro with no airport card.

Hello
Forgive me if this has already been discussed but I am looking at all options to add wireless function to a mac pro with OS10.4 that does not currently have an airport card installed. My options so far are to either purchase a airport card, purchase a USB wireless dongle i.e.: D-Link DWA-140 (for which I am having trouble finding something that is compatible) or possibly using a airport express. The objective is to use it for presentations for lectures as I am using keynote and would very much like to use the keynote remote from my iPod touch (later with a iPad) so I can control my presentation wirelessly.
My question is this, will I be able to use an airport express, connect it via ethernet to the mac pro and create the wireless connection with my iPod touch? Will I require a wireless router? Or can anyone suggest an easy way to wireless control a keynote presentation with a non wireless mac.
Thank you so much.
Dave

This is not an exact answer to your question, but we had cable installed today (Virgin Media, UK) and the router is too far for my MacPro tower to connect. The engineer gave me a wireless dongle (the D-Link DWA-140) and said it would do the trick. After a few hours of searching online, I cannot make the dongle connect to the router, so I would recommend that you avoid this option for a MacPro. It may be possible to connect it but I'm certainly not finding it straightforward.

Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router. Any help, Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router.PLs help

Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
Mishcadola

I spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there!

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

Mac Pro with two graphic card each one with two dvi output, can I extend deskop to three outputs?

MAC OS 10.7.4 3.2GHz Quad-Core Intel Xeon processors, 12GB of 800MHz DDR2 and 2 ATI Radeon HD 2600 XT 256MB (two dual-link DVI ports) . The problem is, I woul like to use one output as main and the three others as secondary or extended desktop but the system don't allow me use two diferent video cards this way.

Mac Pro with Apple Raid Card - 1 drive OSX (JBOD) + 1 drive Vista?

Can anyone walk me through what I'd need to do to set up an early 2008 model Mac Pro with the Apple Raid Card pre-installed and 2 500 gig drives, so that I can have OSX on the first drive and Vista on the second?
I know it defeats the purpose of the raid card, but...
What I've done so far is:
1. Removed drive #2
2. Install and using Raid Utility, add the first drive as a JBOD set/volume
3. After install, shut down the machine
4. Re-add drive #2
5. Restart
6. Use disk utility to add drive #2
I tried to use bootcamp, but it only wants to put windows on the first drive - which won't work because it is RAID.

Run Vista off an ATA interface in the 2nd optical drive. There is an SATA 2 ATA adapter.
I think you can boot Vista off some RAID controllers, check out Highpoint RocketRAIDs. Should be able to configure the RR.
Boot Vista off USB is a stretch.

2010 Mac Pro with Apple RAID card - "Drive carrier 00:03 removed"

I've got a 2010 Mac Pro with the Apple RAID card and 4 internal identical Seagate ST32000641AS 2TB drives inside.
I've never had a problem with the RAID card (either battery or in operation) except for one thing:
Almost every time I shut the machine down (which I try to do as rarely as possible), it keeps losing Drive 3, the spare.
(See RAID Utility event log snippet below.)
[I wish I could understand why this Apple RAID card keeps losing the spare across power-cycles/reboots, but I digress.]
So I just adopted it as the spare and it spawns the rebuild and many hours later, everything's fine again.
... until the last time I rebooted (Jan. 2nd).
After the usual "I lost the spare" message upon login, it began the rebuild.
But this time, about 11 1/2 hours later the rebuild stopped and RAID Utility reported "Drive carrier 00:03 removed".
Bay 3 is now missing in the Controller view.
I powered off the system last night, and left it off overnight. Today I took all the drives out, blew the dust off and reseated them.
Same thing. Drive 3 is still missing, and now the rebuild task aborted.
The drive bay location shouldn't matter, right? Can I swap the Bay 3 drive with the Bay 4 drive?
I figure one of two things would happen:
(1) It will report Bay 3 as being there but Bay 4 as being missing, same situation as is now. Meaning the problem is in the Bay 3 spare drive.
(2) It will report Bay 3 as being missing (despite a 'good' drive being present) and Bay 4 will be the (unattached) spare, and the RAID set will be unviable. Meaning the problem is with the drive bay itself, not whatever drive is plugged into it.
If "Drive carrier removed" is trying to tell me the disk is bad, why do I not see any log messages about it? I suppose a spare that never gets used could go bad from lack of use, but ... no messages at all?
Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
% sudo raidutil list driveinfo
Drives Raidset       Size      Flags
Bay #1 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #2 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Bay #4 RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
Event log snippet:
Saturday, January 11, 2014 8:15:19 AM PT
Background task aborted: Task=Rebuild,Scope=DRVGRP,Group=RS1
informational
Friday, January 3, 2014 3:50:28 AM PT
Drive carrier 00:03 removed
informational
Thursday, January 2, 2014 4:29:37 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, January 2, 2014 4:29:28 PM PT
Adopted drive in bay 3
informational
Thursday, January 2, 2014 4:28:34 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Saturday, December 7, 2013 5:35:17 PM PT
Marked drive in bay 3 as a global spare
informational
Saturday, December 7, 2013 5:35:08 PM PT
Adopted drive in bay 3
informational
Saturday, December 7, 2013 5:34:11 PM PT
The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
warning
Saturday, December 7, 2013 5:34:03 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Friday, December 6, 2013 4:56:47 AM PT
Battery finished conditioning
informational
Thursday, December 5, 2013 9:53:44 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Friday, September 6, 2013 10:53:11 PM PT
Battery finished conditioning
informational
Friday, September 6, 2013 3:41:33 PM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Saturday, June 8, 2013 3:41:35 PM PT
Battery finished conditioning
informational
Saturday, June 8, 2013 8:37:49 AM PT
Battery started scheduled conditioning cycle (write cache disabled)
informational
Thursday, May 30, 2013 4:09:51 PM PT
Marked drive in bay 3 as a global spare
informational
Thursday, May 30, 2013 4:09:42 PM PT
Adopted drive in bay 3
informational
Thursday, May 30, 2013 4:08:59 PM PT
Degraded RAID set RS1 - No spare available for rebuild
critical
Thursday, May 30, 2013 3:32:29 PM PT
Degraded RAID set RS1
warning

Power Pig wrote:
"Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,4      5.23TB    0.00MB Rebuild: 0% complete
I was talking about this.
This looks like a RAID 5 setup without the parity to me. I would said it basically a RAID 0.
Also you metioned "I guess that previous spare must really have gone 'bad', despite having never been used! "
I wiped everything out, I selected the 3 disks and clicked on "Create RAID Set" with RAID5 selected and the "Use unassigned drives as spares" option checked. The 3rd disk has always been marked as the spare ever since then. You do not have a choice to create a "RAID5 setup without the parity". If I wanted a RAID0 I would have chosen a RAID0! raidutil now says
% sudo raidutil list raidsetinfo
                                     Total     Avail
Raidsets      Type       Drives       Size      Size Comments
RS1           RAID 5     1,2,3,4    5.23TB    0.00MB No tasks running
Every time the system would 'lose' Drive 3 on boot, I would just keep rebooting until it was 'found', and then manually re-assign the now-'floating' drive as the spare - and the RAID would rebuild.
There was never a problem until the day that prompted this post - when it would not find Drive 3 no matter what I did. I turned the Mac Pro off for several hours until the drives had all cooled down and it still did not find the drive. I left the machine on but unmounted the degraded volume until I got the new replacement drive.
I really don't understand what you are getting at. It's like you are trying to tell me I set it up as a 4-drive RAID5 with no parity(!) and that I was in grave danger because one of the disks was gone. The actual RAID contents (spread across Drives 1, 2 and 4) were never in danger, unless a 2nd disk had failed while the spare was not seen by the Apple RAID card. I wasn't too worried about that happening.

Is there a fix for MAC Pro with Dual video cards that randomly logs off and on?

From my readings on the Internet this seems to be a know problem. That even furthers my frustrations with the latest OS X upgrades. So far on both my MACBOOK PRO and my MAC PRO it has been a major downgrade as both systems are no longer stable. Enough with my complaints...
Is there any plan to address this problem with the MAC PRO? I can't believe 10.8.1 didn't fix it. More can be read on it at:
http://jvm-technology.blogspot.com/2012/08/mac-pro-users-experiencing-random-log .html
Does anyone have work around to use dual screen monitors with the system? I have two video cards, the article says to remove one. Has this worked for anyone? Can I use dual screens with the one video card. Before I go messing around with these type of things I just want to be sure that this is a real fix. For the price of the cards and the system I really can't believe apple has this issue in the first place and has not fixed it.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Using AP express to connect Mac Pro w/o airport card to internet

Hi, I am using an Airport Express station to connect my Mac Pro to the internet. I am doing so by having my Airport Express connected to my main Airport Extreme base station and have the Mac Pro plugged into the Airport Express' ethernet port.
Once I do this everything works fine and my Mac Pro gets really fast internet for about 5 minutes and then it cuts out completely. Nothing can get the internet working except unplugging the Airport Express and plugging it back in.
Anyone know what the problem is?
My Mac Pro doesn't have an Airport card and only needs to connect to the internet once a month for updates so it is not worth it to install one.
Any help would be appreciated.

Correct if you want to use the Thunderbolt connector on the Mac.
The curious thing is.....the Mac can connect to the Express at up to 300 Mbps using wireless, but will be limited to 100 Mbps using the Ethernet port on the Express.
So, if you are looking for connection speed, wireless may well be much faster than the Ethernet connection.

27" iMac as monitor for 8-core Mac Pro with Dual DVI card... what cables?

I have a Mac Pro 3 GHz 8-core Intel Xeon processor with the NVIDIA GeForce 8800 GT card with two DVI ports for output. One goes nicely to an external JVC monitor, but I would like to get the 27" iMac as a monitor for the Mac Pro. Has anyone heard of, or done this? What cables and connectors would be required?
Cheers everyone.

Actually that is only one solution. The converter is not a cable, but a black box. So you need the two cables I mentioned to make the whole process work;
Mac pro -> DVI to DVI cable -> DVI to m-DP converter -> m-DP to m-DP cable ->iMac
This article mentions the three that have come to market.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
The first two are expensive and very expensive. The third does not appear to support content protection schemes, so a lot of new digital video sources would not make it to the iMac's display.

CS4 and Mac Pro with two graphic cards: OpenGL not supported!

I have two graphic cards in my Mac Pro. If a use a dual display setup where both displays are connected to the same card, Photoshop enables OpenGL support (Preferences > Performance).
Switch both displays to the other card, also works fine.
BUT if I connect one display to the first card and the second display to the second card (so each display has its own graphic card) the Open GL support is greyed out (I can not longer use canvas display rotation for example)
This doesn't make sense to me and looks like a bug...

Are you running two of the same cards or are they different? I'm running a pair of NVidia 7300GTs with no issues...and I'm driving a pair of 30" Cinemas and an NEC 26" widescreen. I get better performance on the single 30" than on the card with the two displays. Also note that which PCI slot you are driving the cards in has an impact on their performance...something to look into.

New mac pro with ATI video card & 2x 24" displays??

is it possible to connect two 24" apple displays to the new mac pro using the ATI video card?

2 nVidia cards doesn't buy you any performance increases. They don't talk to each other to improve performance in Mac OSX. Multiple cards is mostly for supporting multiple displays. How many displays do you have?
Apple has some initial performance benchmarks:
http://www.apple.com/macpro/features/graphics.html
Scroll down to see the graphs. The HD4870 destroys the GT120
Message was edited by: Wormy-san
Fixed names of cards

Will Apple be updating the Mac Pro with updated graphic cards such as the Nvidia GTX 680?

Hey Apple! And a big Hello to the Apple community!
I'm looking to buy my first Mac Pro and i'm very excited about it!
I haven't bought it yet because i'm waiting for Apple to upgrade their current graphics cards that are available in the current line up.
The ATI Radeon HD 5770 or the ATI Radeon HD 5870. Altough they are very good graphic cards, I feel that they are very outdated.
Would there be any chance of Apple upgrading their current line up to Nvidia GTX 680?
Thanks again in advance!

Hope springs eternal:
GTX5xx GPUs
GTX580 3GB running in 10.7.3.
Card shows EFI boot screens on either DVI port.
Also have GTX560 going. Will announce GTX570 separately.
Requires external PSU, but this GTX580 kicks AMD/ATI 5870 to curb, leaves for dead, and never looks back.
http://forums.macrumors.com/showthread.php?t=1360927

Windows and Mac Pro w/ Apple RAID card

It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
So, i've connected SATA drive this way and it works fine with OS X.
But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

I've tried that.
Installation and booting of WinXP passed OK if RAID card removed.
But i've got black screen again trying to boot WinXP after RAID card re-installed.

MacPro with no airport card + airport express

Got an Ipad last week. Got an Airport Express this week. Tried to setup a wifi network since 2 days trough ADSL modem. Mac Pro as no Airport Card. Ethernet port 1 goes to modem. Ethernet port 2 goes to Airport Express. Successfully configure Airport Express from MacPro. Can see network from Ipad but no internet connection. The question is: Am I loosing my time? Is there a way to setup so that I can get internet on Ipad?
Thanks.

Hey Bersan, I know it was a long time ago, but i'm trying to do exactly the same right now, but you did not post one information:
1* Enable Internet sharing from Ethernet 1 (PPP) to Ethernet 2 (Airport Express).
2* Manually configure IPv4 on Port 2 with address 192.168.2.1. Submask at 255.255.255.0 And the Router? What do i put???
3* In Airport Utility create a wireless network. Setup connect via Ethernet.
4* Share connection should be deactivate (bridge mode).
5* Manually configure IPv4 in menu TCP/IP.
IP:192.168.2.12
Subnet mask:255.255.255.0
Router:192.168.2.1
DNS:192.168.2.1
You did not explain how to fill the "router" field on the Ethernet 2 form...
Can you help me?
Cheers!

Mac Pro with Eizo monitor

Hi-
I currently use an eizo display connected via the DVI to my G4 Powerbook. It uses Eizo ColorNavigatior software.
I ordered a Mac Pro with the x9100 card. I also downloaded the Ub version of Eizo ColorNaviagtor. The question is, can I hook up a non-Apple monitor right away? Otherwise, how can I install the Eizo software with no monitor hooked up?
I do have an Apple 17" CRT Studio display, that is my only Apple monitor with a 15pin VGA Video Connector. I have the DVI~VGA adapter cable, so shoud I use that monitor first to install my Eizo software?

not only will it startup just fine, but if you check the software you'll see it will install a profile for the monitor. I spent a lot of time trying to get a profile that was any better than the stock EIZO profile and found it's pretty much dead on the money for my use so you may or may not need to calibrate the monitor beyond the profile provided with the EIZO itself.

Mac Pro with no airport card installed

Similar Messages

Maybe you are looking for