Mac Pro with OS 10.5.8 ?

I am running a Mac Pro with OS 10.5.8 and Dual Core Intel Xeon processors, 4mb Ram, 5gb memory. I want to install 64 bit Windows 7 Professional and run it through Bootcamp or Parallels. I have BootCamp running on the machine with Windows XP, but am looking at the possibilties.
Am I out of luck here?
Thanks deanfromnc

If you already have XP installed via BootCamp, then you can upgrade the computer to Snow Leopard or Lion in order to install Win7. If you have a 2006 or 2007 Mac Pro then you cannot run 64-bit Win7 via Boot Camp, but you could using Parallels.
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Similar Messages

  • Help! Logic Express 8 does not work on my Mac Pro with OS 10.5.1

    Hello, I hope somebody around here is able to help me.
    I have got a new Mac Pro with one Quad core processor since yesterday and it works fine except for Logic Express 8 (version 8.0.1). Whenever I start Logic the program crashes as soon as "Core Audio initialisieren" is shown in the display. I have tried to reinstall the program, deleted it completely and installed it again. It is always the same.
    Has anyone else experienced this problem? What can I do about it? I am a musician and I really need Logic Express to run.

    Confused. 10.6 is DVD based. Only Lion and above are downloads.
    And best install is not to upgrade. Do a clean install  - on another drive.
    Corrupt partition tables or bad sectors or no room to adjust the partitions or the directory is corrupt.
    ERASE the drive if Repair Disk didn't work.

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • Itunes library sharing on single Mac Pro with 2 users.

    Recently I have setup a Mac Pro with 2 users. Primarily the thought was to have this as the media server for a couple of AppleTV (2nd generation) and other users. The primary user on the Mac Pro (me), has the iTunes Library located in the Public Directory. Home sharing is enabled, on all systems. There is no problem when the Primary user is logged in and iTunes is running. When the second user, logs into the Mac Pro, nobody has access to the iTunes Library of the primary user.
    I was thinking of setting up the secondary user with the same itunes directory, but when new content is added by the primary user, the secondary user would not see it automatically, would they?
    Basically I am trying to set up a common iTunes library for all users and all devices. Is it possible

    michaelfromsherwood park wrote:
    The primary user on the Mac Pro (me), has the iTunes Library located in the Public Directory.
    while logged in to the other user account, launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder in the shared folder.
    if you're using fast user switching, user A must quit iTunes before user B can access the library.
    Home sharing is enabled, on all systems.
    home sharing is designed to work between two (or more) computers on the the same LAN.

  • Using Logic 7.2 on a Mac Pro with Protools 7.2.1 and Mac OS 10.4.7

    I am researching purchasing a New Protools/Logic System
    Seems the version of Protools to use with the new Mac Pros is 7.2.1, which only recently came out to work with the new "Mac Pros" Digidesign has stated thhat it works with and Mac OS 10.4.7
    The latest version of Logic is 7.2 which has been out for a while....hmmm
    Is anybody using Logic 7.2 on a New Mac Pro with Protools 7.2.1 and Mac OS 10.4.7, and does it work?

    Logic Pro 7.2.2 is not compatible with DAE/TDM on a Mac Pro INTEL.
    You will see only "CoreAudio" as available choice, when trying to engage your audio hardware.
    We have to wait for any announcements in this regard, maybe at AES or DigiDays in San Francisco.
    Best,
    21th

  • How do i stop sharing my mac pro with my mac air

    how do i stop sharing my mac pro with my mac air?

    Turn off Sharing in System Preferences>Sharing.
    Clinton

  • How do I get Mac Pro with Lion Server to restart at a set time when users are connected?

    I have recently configured a Mac Pro with Lion Server, and have set it to restart automatically every morning at 3am. When I arrive in the morning, I notice that it has not rebooted, usually because it states there are users connected. Is there a way to automatically disconnect users so that the machine will reboot.  No one is ACTIVELY connected at this time of the morning, but may still be logged in somewhere. I did see where I can log out users after a set period of time when using Workgroup Manager to manage a computer or computer group, but I don't use the server to manage all of the computers that have users log in.
    Thanks!

    Well, it doesn't necessarily have to be each and every night, but it was for the sole purpose of preventing sluggishness. We had it set up before, as Snow Leopard Server and it would restart every night. It would occasionally be slow and need rebooting, however a manual reboot was not possible by most people in the store as they did not have credentials to screen share and restart it - which would result in holding down the power button to shut it down.
    The server is used for the sole purpose of logging in about 50 users just so they can customize their experience, as well as saving items to their own home folders.  The store is closed during the night, and there is no reason anyone would be accessing it during the night.

  • Windows Vista 64 bit w/older 2 dual core 3.0ghz Mac Pro with NVIDIA 7300

    I have read a variety of the posts that have appeared here on the use of Windows Vista 64 bits on a Mac Pro. I remain confused, and but want to do this. I have a Mac Pro purchased in the Spring of '07 with dual 3.0Ghz dual core Xeon cpus and 10gb of ram, using the NVIDIA GeForce 7300 GT and running 10.5.1, with multiple drives. I want to run the 64 bit version of Vista Ultimate to use my ram, and to gain the performance this box should offer. It appears that I have three options:
    1. Boot Camp: I don't know if the drivers are available, seems like the new Mac Pro drivers probably would not work, even if I could find them, since I have an older Mac Pro with a pair of the dual core Xeon CPUs. Don't know if there is an alternate source than Apple for the drivers, or a way to get around the problem in boot camp.
    2. Parallels: I do not believe that 64 bit apps are supported by Parallels
    3. Fusion: Their web site says they support Win Vista 64 bit, but it is not clear to me on the web site where the drivers are obtained, or perhaps they are built in to Fusion. Will I get the performance and memory benefits in fusion? Or is the OSX virtual overhead so high that this is a fools errand?
    I do a lot of video editing, and fully 95% of my life is in the Mac world, but I have individuals who send files for editing, and occasionally they require Windows tools, much to my chagrin. I also have a small number of programs that need Windows 64. I occasionally am required to do some development work, and would like to use this machine for that purpose if it can indeed run Win Vista 64bit. I have XP loaded on a more modest box andit is running fine when I need it, which isn't very often.
    Any help, or successful experience in running Windows Ultimate 64 bit on this hardware, utilizing its resources would be greatly appreciated.

    Here are my results after further digging online and from my own experience.
    Here is the procedure:
    1. Check whether your Mac has the 32-bit EFI or 64-bit EFI
    http://www.ihackintosh.com/2009/08/snow-leopard-106-and-64-bit-what-you-need-to- know/
    2. Create a Boot Camp (BC) partition for Windows 7 x64. Resize the partition size using the slider in the BC app. Follow the instruction, insert the Windows 7 disk and reboot.
    3. This will load the PC partition which is FAT formatted for now. Choose the Boot Camp partition on which to install Win 7, but choose in the option to format that partition. It will automatically format it in NTFS. Otherwise, it will not install on that partition.
    Note : A "OEM System Builder" Windows 7 64-bit Professional UPGRADE install without any issues what so ever. The upgrade disk is a full install. Read this for further information:
    http://www.pcworld.com/article/174288/windows7_upgrade_madecheaper.html
    4. Run windows, then insert the Snow Leopard disk. It will tell you your hardware cannot support x64 version. Do the following procedure to manually install the driver:
    http://michael.anastasiou.me/index.php?option=com_content&view=article&id=22%3Aq boot-camp-x64-is-unsupported-on-this-computer-modelq-solution&catid=7%3Ahow-to&l ang=en
    5. Then update Boot camp using Apple Software Update in Windows.
    6. All hardware works fine except the sound. The sound only comes out of the internal speaker, even when headphone or speakers are plugged in the jack. Installing the Realtek High Definition Audio Codecs driver in order to fixe the problem. Shutdown and reboot to make it applicable. Try a second time if it still does not work:
    http://218.210.127.131/downloads/downloadsCheck.aspx?Langid=1&PNid=14&PFid=24&Le vel=4&Conn=3&DownTypeID=3&GetDown=false
    That's it.

  • Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. Help?

    Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. I can change them on my old Mac Pro with Lion, but not the new one. I can scan but I can't save it to a folder on my hard drive. I can only let it default to a back up date folder. Tried all sorts of things to change the preferences and folders, nothing worked. Ideas?
    Stephanie

    To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
    Plug it in, then on the iPhone sync summary screen, click "info" along the top.
    Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
    Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

  • HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

    I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

    Mac Pros don't support Airplay.  Only some post 2011 Macs do, MAc Pros aren't amongst them.
    http://www.apple.com/uk/osx/specs/
    You could try Airparrot software as a workaround.
    AC

  • Mac Pro with 10.5.8 not booting

    Hi everyone My Mac Pro with 10.5.8 is not booting suddenly, it stays on gray screen with the spinning watch. Actually i was trying to edit the hosts file to patch one application in that process i deleted three file from \private\etc\ folder the files are hostconfig, hosts, hosts.equiv, after this my mac pro is not booting. I am still runing MAC OSX 10.7 lion from the other partition without any problem. But i want osx 10.5.8 to be fixed as i have lots of applications installed in it. Is there any way that i can REPALCE THESE FILES BACK ( BEFORE DELETING THOSE FILES I HAD TAKEN A COPY ASUMMING SOME PROBLEM) OR Can i reinstall same OSX 10.5.8 in it preserving all the settings as it is. I tried Safe Mode, Single user mode for no luck. i tried to get the errors during bootup by pressing Command-V the error shows are 1. bootup lookup server failed, 2. mdsync launch failed (ipc/send) invaild destination port, etc, etc, etc, etc
    Can Anyone Hep Me Please
    Addins

    Restart into Mac OS X 10.7, open the root level of the Mac OS X 10.5 partition, choose Go to Folder from the Finder's Go menu, provide private/etc/ as the path, and drag the backup copies of those files into that folder. If needed, the default permissions for them are system with read and write access, wheel with read only access, and everyone with read only access.
    (61720)

  • I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

    I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

    It's best to install Snow Leopard on one of the three remain drives without an Operating System.
    You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
    Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
    Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard.

  • I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8.  How do I update to a more advanced version of OS X with a download?

    I have a mac pro with OS X 10.5.8., I have a mac pro with OS X 10.5.8.  How do I update to a more advanced version of OS X with a download?

    You need to go through 10.6.3 and 10.6.8 to get to 10.7 or 10.8. If you find that 10.6.8 isn't enough, open the Mac App Store and try purchasing Mountain Lion 10.8. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Core 2 Duo(not Core Duo) or better CPU with at least 2GB of RAM, and if it does, phone the online Apple Store and order a download code for Lion 10.7.
    (85026)

  • I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

    I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
    I need to keep Snow Leopard so that I can run some old softward.

    If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
    CCC can clone Lion Recovery - great for moving or backup.

  • Is it possible to upgrade the Mac Pro with SCSI/SAS drives?

    Hi guys I am considering to move on to a Mac Pro from my old PC.
    The Mac Pro enclosure is quite unique in its hard drive holders as no cables are used and all drives are connected with a plugin mechanism.
    So I am curious if that will allow me to upgrade to a SCSI/SAS storage system which requires cable connections between drives and the SCSI/SAS card on the PCI-E slot. I dont know if this will be possible with the Mac Pro enclosure.
    Has anyone tried to do this？
    Btw is there any Ultra320 or SAS(preferably) interface card available for Mac OS X?

    The connectors for SATA drives can be used with SAS drives. However, the controller needs to be SAS compatible. I have never installed a SAS drive in the Mac Pro bay to see what happens. If some one has a SAS drive and wants to try this I would be interested in the results.
    My guess is that the Mac Pro would not see the drive.
    Areca sells the Mac Pro PCIe bootable ARC-1680 SAS controller in several configurations. This controller allows the user to utilize SAS or SATA hard drives connected to the card. The ARC-1680x comes with two external mini SAS connectors that can support eight direct connect hard drives or up to 128 devices (in theory) when used with SAS expanders.
    The ARC-1680LP has one internal mini SAS port and one external mini SAS port. I looked at the Mac Pro internal SATA connectors and they can unscrew from the frame but there is only about 1/2" of clearance in that area of the case. In addition, I would want the hot swap bays to still operate and I did not see an easy way to patch into the existing SATA connectors. It would be nice if the Mac Pro factory connectors used snap on SATA connector on the back of the backplane so that users could interface the 4 SATA bays with an internal PCie controller. However, its hard wired in the existing configuration. With the new Mac Pro PCIe RAID 5 card on the market there must be alternative connectors that allow this type of installation to work properly.
    Based on the ease at which the Areca SAS controller can be added as an external using the ARC-1680x I went with that option. I am using it with eight direct connect SATA hard drives now. I plan to expand the storage by adding a SAS expander in the form of a hub or an enclosure with SAS capabilities. I have been looking at a 16 bay SAS enclosure but I am not sure how loud it will be
    Details on the ARC-1680 can be found here:
    http://www.areca.com.tw/products/pcietosas1680series.htm
    Its very cool to have SAS or SATA capability along with a bootable card that can support tons of hard drives and RAID levels 0, 1,1E, 3, 5, 6, 10, 30, 50, 60 or JBOD . I booted the Mac Pro with a 2TB Mac OS X 10.4.10 RAID 6 volume and ran Xbench. It shows a 400MB/sec. hard drive setup and raises the overall Xbench score substantially.
    While I doubt I will boot the Mac Pro from the RAID 6 volume much, it is very cool that that function is available. This is the only PCIe host adapter I have found with boot capabilities besides Apples new $999 4 port SATA internal card. SAS has lots of expansion capabilities. Users that want pretty much unlimited hard drive connectivity will enjoy the new ARC-1680x.
    Have fun!

  • HT201364 i have a mac pro with os x 10.6.8  why can't install a mavericks on him ?

    i have a Mac Pro with processor Dual-Core Intel Xeon processor speed 3 GHz number of processor 2 memory ram 2gb why can' not make a upgrade to mavericks OS X Mavericks 10.9.2 ?

    To install Mavericks, you need one of these Macs:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory
    8 GB or more of available space

Maybe you are looking for