Mac Pro with X1900 - can I connect both 20" LCD and Sony Monitor?

I'm about to purchase a Mac Pro with the x1900 for editing video with Final Cut Pro Studio. I'll use a 20" monitor for main viewing, but would like to use a Sony PVM-14L2 as a playback monitor via Component video. Can I use one of the DVI outs of the x1900 to go to the Sony? I found this type of converter online: http://www.svideo.com/hdtvaiwr8500.html
Is anyone using a set-up like this? I figure it must be pretty common for folks who edit video on a Mac Pro to output to a playback monitor via Component video. Will the x1900 let me do that with the right cable?
Thanks,
joel

Hmm. I have that computer, card and dongle - I'll try it out tonight (PST) and let you know.
My gut feeling is that it won't work, or won't work as you would hope.
My powerbook had SVideo out on it, but even when connected to a TV, it would not work as a video out in the same way a fire wire preview through a camcorder did - it was a second monitor on a TV, and was not the same at all as a video out feed (it looked rather horrible in fact).
So, even if this does produce a component out signal, suitable for HDTV, I doubt it will work as a playback monitor.
But I'll post back in about 8 hours time (if someone does not beat me to it.)

Similar Messages

Mac Pro with X1900 XT graphics card EFI boot display

Hi all,
I've got this problem with my mac pro with ATI Radeon X1900 XT - 1st DVI connected to the 23 inch apple display and the 2nd DVI connected to my optoma dlp projector.
My problem is that the EFI boot menu shows up on the 2nd DVI connection. So basically I see the boot menu only on the projector when it should have been on my apple display.
Can someone please help me figure this out. Can't seem to find any on google or anywhere else.
Thanks in advance for the help!

Sorry, I forgot to add that small detail..
I can switch both connections and it'll work for the mac part of the deal but the windows end cant switch screens - making the apple display the primary display on windows..
now it sounds like a "windows" issue doesnt it!?heh

Is there a fix for MAC Pro with Dual video cards that randomly logs off and on?

From my readings on the Internet this seems to be a know problem. That even furthers my frustrations with the latest OS X upgrades. So far on both my MACBOOK PRO and my MAC PRO it has been a major downgrade as both systems are no longer stable. Enough with my complaints...
Is there any plan to address this problem with the MAC PRO? I can't believe 10.8.1 didn't fix it. More can be read on it at:
http://jvm-technology.blogspot.com/2012/08/mac-pro-users-experiencing-random-log .html
Does anyone have work around to use dual screen monitors with the system? I have two video cards, the article says to remove one. Has this worked for anyone? Can I use dual screens with the one video card. Before I go messing around with these type of things I just want to be sure that this is a real fix. For the price of the cards and the system I really can't believe apple has this issue in the first place and has not fixed it.

Self-hosted add-ons have to be fixed for every new version of Firefox. Two to 6 months for updating an add-on is ridiculous for a program which has a new version release every '''6 weeks'''. If that extension was hosted at the official Add-ons website, Mozilla would take take care of "bumping" that extension, as long as it keeps working, for every new version of Firefox, as the new version is released.
See this thread from yesterday, I posted instructions about how to "bump" that extension for Firefox 7.<br />
https://support.mozilla.com/en-US/questions/884484
You can also use this extension to "bump" an already installed extension for compatibility with the currently installed version of Firefox. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Port Forwarding to Mac Pro with 2 different internet connections

I have my Mac Pro connected to the back of my cable modem. I have given this service the name "Cable" in my network preferences. The details are:
IP: xxx.xxx.xxx.100
Subnet: 255.255.248.0
Router: xxx.xxx.xxx.1
I have the other Ethernet port of my Mac Pro connected to the back of my Airport Extreme which runs ADSL+ from another ISP. I have called this service "ADSL". The details for this connection are:
IP: xxx.xxx.xxx.188
Subnet: 255.255.255.0
I run a calibre server on the Mac Pro and on my PC (the PC is directly plugged into the back of the Airport Extreme). I have a Dyndns service that works on the address of the Airport Extreme base station.
I can access the PC's calibre server via the mobile network but NOT the Mac's. Even though I have port forwarding to the Mac's reserved IP address of 188, I can't access the server. I can access it on my iphone/ipad via WIFI but not from the mobile network.
If in my Network preferences I change the order of the services i.e. make the ADSL the top service and cable the second, I CAN access the server from the mobile network. It works as it should. If I change the order so that the Cable service is on top, I can't access the server again.
Why does this happen? Can I fix this? Do I need to set up another Dyndns service on my Mac Pro?
Any help would be greatly appreciated. I am going to post this as a new post as well because I'm not sure whether the people that were so helpful last time will know that I have updated the post.

Just installed TeamViewer and we're using that. Works great.

Can I connect both a printer and a hard drive to time capsule using a usb hub?

since there is only one usb port on a time capsule, can i connect a printer and a hard drive using a usb hub?

You can use a USB hub if you need one to connect an external drive and a printer. See > http://support.apple.com/kb/HT2421?viewlocale=en_US&locale=en_US

I just purchased two Macbook Air along with two Time Capsule (2TB) for my kids. Meanwhile I use a sagemcom ADLS modem/router for home use. Can I connect both Time Capsule and laptop which will allow both laptop to have their own backup system?

I want both of the computers to have their own independent time capsule.

want both of the computers to have their own independent time capsule.
I assume that you are asking about using the Time Capsules for Time Machine backups here, correct?
If yes, both MBAs will be able to select the specific Time Capsule that they will use for backups, so "point" MBA1 to Time Capsule 1 and MBA2 to Time Capsule 2.
Since you will have plenty of available backup space if you use two Time Capsules, you might want to consider having each MBA back up to both Time Capsule 1 and Time Capsule 2.
This way, if one Time Capsule fails, you will still have a complete set of backups for both MBAs.

Macbook Pro Retina (15") can't connect to wireless mouse and external USB keyboard

Hi All,
I got my new MacBook Pro Retina (15 inch) about 3 weeks ago. It works fine. I got a 30" Dell screen that I am using via thunderbolt/usb adapter. Also, I am using a thunderbolt ethernet adapter. Both adapters work fine without any problems.
I have an apple usb keyboard connected to the USB hub of the screen, as well as my iphone cable. It is a regular, full size apple keyboard. In addition to this, I have a logitech nano connected directly to the right usb port of the macbook pro.
This setup was working well until a few days ago. I lost connectivity with my mouse. Initially, I thought the batteries are empty. After replacing them, I still had no connection (again, the usb receiver is *directly* connected to the macbook).
I changed a few cables here and there and noticed that I can get either the keyboard to work or the mouse but not both at the same time. A reboot did not help.
Did anybody encounter such a strange problem already? If so, what could I possibly do?
Thank You,
--Martin

Hello nikkig00,
It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect. I found a few resources I recommend for this issue.
I recommend reviewing this article first:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below. Step 9 specifically stands out to me for the issue you described:
9. Restart your computer
Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1222 I was trying to run ITunes 10.7 update on my Mac Pro with Retina display but the message appeared "An error has occurred" so I can proceed with the update. I dont' see any other messages. Any ideas what could go wrong?

I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update

Scott's solution fixed the problem. It would have been helpful if the update message in the App Store had reported that. I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes. I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher. I have to come to the forum every time something happens. Why not simply have a dialogue window that opens up to explain the most likely issues?

Last Mac Pro with Firewire 400?

The new Mac Pro's look nice, but without Firewire 400 they're useless to me... Can anyone tell me when the last Mac Pro with Firewire 400 was released?...and what the speeds were on them? Thanks in advance if anyone can help.

Fair points, to be sure. I just think that, given the number of common/popular devices that are FW400 only, the removal of FW400 ports is a bit premature at this time. Like the OP said, it would be frustrating to buy a very expensive computer, and immediately have to expand in order to make use of fairly standard and not yet out-dated gear.
Dave Sawyer wrote:
Sorry to disagree, but to me, expecting a company to go to the expense of engineering in a different physical port just to save someone from having to use a simple, inexpensive cable adaptor seems a bit silly.
It couldn't be that hard/expensive, given that previous models had both. Though I certainly understand the idea of reducing cost wherever possible.

2008 Apple Mac Pro with SAPPHIRE TRI-X R9 290 4GB GDDR5 OC (UEFI)

Dear Apple,
Can you please add hardware/drivers support for the Sapphire Tri-X R9 290 GDDR5 OC (UEFI) Graphics cards to the latest Mac OS X 10.10 operating system?
We have a few Apple Mac Pro's that we installed older Radeon 7970 graphics cards in (a few years back) and now we are upgrading the graphics cards to the newest Radeon R9 290 Series cards (Sapphire Tri-X R9 290 4GB GDDR5 OC UEFI).
We chose the Sapphire Tri-X R9 290 4GB GDDR5 OC (UEFI) (11227-00-40G) Graphics cards.
The Sapphire Graphics card can be found here:
http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1227&pid=2091 &psn=&lid=1&leg=0
We have been trying to figure out how to get this graphics card to work with the latest OS X 10.10 Yosemite. We are installing two Sapphire R9 290 graphics cards per machine.
We want to make sure that the OS X drivers support multiple monitors, CrossFire, as well as HDMI audio, and support GPU hardware support in the latest OS X 10.10 Yosemite.
Has anyone managed to get the Sapphire Tri-X R9 290 (SKU ID: 11227-00-40G) working in a 2008 or 2009 Apple Mac Pro?
We have 24 Apple Mac Pro's and we purchased 48 of the Sapphire Tri-X R9 290 graphics cards (to install into the Apple Mac Pro's) and we're trying to figure out how to add driver support to OS X for the Sapphire Tri-X R9 290 / Radeon R9 290 to the latest Mac OS X.
If I go into the "Graphics/Displays" Hardware section it shows that the Sapphire card (in Slot 2) is installed, but it only displays the name "Display".
The properties of the Sapphire Tri-X R9 290 graphics card are:
Vendor: ATI (0x1002)
Device ID: 0x67b1
Revision ID: 0x0000
Kernel Extension Info: No Kext Loaded
Any ideas as to how to install hardware drivers to get these graphics cards to work properly in OS X 10.10 Yosemite and to enable GPU hardware support in OS X and also enable HDMI Audio?

Over a YEAR has passed, and we still can't get Apple to add the latest hardware drivers for the newest/latest AMD Graphics Cards (AMD R9 290 series).
We have contacted AMD, and Sapphire, and everyone has pointed their fingers back at Apple, and said that Apple is the only ones that can add the latest graphics drivers to their Apple OS X Operating System.
So the problem lies on Apple, and Apple refuses to update it's operating system to support the newest/latest hardware.
AMD pointed us right back to Apple and said that it's Apple's OS X Operating System, and that it's Apple's job to add and write the newest/latest graphics display drivers to their OS X operating system.
AMD says it's Apple's fault. Sapphire says it's Apple's fault. Apple just refuses to do anything, and ultimately it's Apple's operating system and Apple's closed-ended ecosystem that refuses to allow customers/users to upgrade their Apple Mac Pro computers to the newest/latest hardware.
In the end, I guess the only solution is to abandon Apple Mac Pro products, and just start purchasing "Microsoft Windows PC" computers that we can upgrade and that have PCIe slots that we can just swap out the graphics cards (every year) with the newest/latest graphics card hardware.
Here: http://forums.amd.com/game/messageview.cfm?catid=440&threadid=181379
Here: https://www.sapphireforum.com/showthread.php?33574-2008-2012-Apple-Mac-Pro-with- SAPPHIRE-TRI-X-R9-290-4GB-GDDR5-OC-(UEFI)&p=277467#post277467
Apple seems to be a "dead end" and they don't support their high-end customers and don't seem to support Apple Mac Pro (high-end) users. Apple only seems to be concerned about selling iPods and iPads and iPhones, and they've abandoned their HIGH-END Apple Mac Pro users that want HIGH-END workstations for professional use.
I guess if you want a high-end workstation, you have to go back to buying a Microsoft Windows PC, and start going back to using the Adobe suite, and just completely abandon Apple and Apple products all together. (Apple is not in the business of designing or selling "high-end" products anymore). Apple just designs low-end "overpriced" hardware, that you can't upgrade, and must toss in the garbage every other year, because you can't upgrade it.
Apple has been heading this way for years, and the newest/latest "Black Shiny Trash Can" (that is NOT upgradeable and has no upgradeable PCIe slots and no way to even upgrade the video cards) and Apple has turned into a "disposable" computer company/business that just builds "All-In-One" garbage computers (that become extremely outdated and must be thrown away every other year, because they are not upgradeable) and you can't swap out video cards using standard COTS (Commercial Off The Shelf) latest Graphics Card adapters, and we can't even get the latest Mac OS X operating system to support the newest/latest graphics display hardware, it seems like our only choice (as others have stated before) is to abandon Apple products and begin moving/migrating back to Microsoft Windows 8.1 Pro machines.
We can't get Apple to support their customers or update their operating system or support the newest/latest hardware in their operating system, so it seems to be a "dead end" ecosystem, and Windows 8.1 Pro and using standard PC hardware is probably a much cheaper/affordable route and it's a long-term solution, because Apple seems to come out with one nice product (every ten years) and then they don't support the product or it's users, or don't follow-up with Apple OS X operating system upgrades, and then you are stuck with very old outdated hardware because you can't even get the newest/latest drivers for the latest graphics cards/hardware.
The only solution is to boot directly into Windows 8.1 Pro, and use Windows drivers, but then why even own a Apple Mac Pro if we can't use Apple OS X and can't even use our OS X software, and the only solution is to use our Apple Mac Pro as a Windows PC?
We're really disappointed in Apple and how Apple fails to update Apple OS X and fails to support the latest graphics cards (such as the AMD R9 290 graphics card).
I think 2014 is the last year that we are going to deal with Apple. Starting in 2015, as part of our 2015 New Year's Resolution, I guess we'll start e-baying our Apple Mac Pro equipment, or selling it (as salvage) and begin purchasing standard Microsoft Windows 8.1 Pro high-end workstations, and get away from the old legacy dead-end Apple garbage hardware and dead-end Apple OS X operating system.
It shouldn't be this hard, just to get some graphics drivers released to support the latest graphics card (which has been out for over a year now). The Radeon R9 290 graphics cards were out in mid 2013 (for over a year and a half, almost 2 years now...) and we are already coming up on 2015, and Apple still hasn't added drivers support for the R9 290 series graphics cards to it's latest Apple OS X 10.10.1 Yosemite.
It's a shame, but Apple has really gone downhill over the past few years. Nothing but really old and outdated hardware, and even their "latest" Apple Mac Pro is 2-3 year old hardware (that Apple is marketing as "new") and it's non-upgradeable, and you can't even run/install the latest graphics cards into it.
Apple is dead-end and it's not a place for "high-end" users anymore. I guess Apple doesn't care about it's "high-end" user market anymore, and is just interested in designing silly iPhones and iPods/iPads.

Mac Pro with 8800 Card Availability

On Jan 21 ETA for Mac Pro with 8800 card was 2-3 weeks. Now, on Feb 2, ( 12 days later ) ETA is still 2-3 weeks.
Anybody heard anything more definitive?

Why not just go out and buy the "stock" Mac Pro with the default ATI 2600XT card right now, and then just order the Nvidia 8800GT separately. Then when your 8800GT card finally arrives, sell the ATI card for $100 or so on eBay. All you will end up paying is about $70.00 more than the BTO option ($375 (including tax) for the 8800GT as a standalone option, minus $100 for selling the ATI 2600XT=$275 out of pocket cost vs. the $200 BTO option).
That way you can have your Mac Pro right away (as I have for the last 3 weeks), and still get my 8800GT at or around the same time as yours for only a $75.00 difference.
Having my new Mac Pro NOW is worth far more than saving $75.00. Time is $$$$$
My standalone Nvidia 8800GT is scheduled to arrive Feb 28th (according to Apple). I already have a buyer with the 1st. generation Mac Pro that will buy my ATI 2600XT when the 8800GT arrives.
Also, you might even have further delays with the BTO option if Nvidia has supply problems that could drag on into early to mid march if you hang with your current order.

HT201343 I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

I have a Mac pro with osx ml in a Ethernet connection and a apple tv with a wireless, there is no way I can see the airplay in my Mac pro

Mac Pros don't support Airplay. Only some post 2011 Macs do, MAc Pros aren't amongst them.
http://www.apple.com/uk/osx/specs/
You could try Airparrot software as a workaround.
AC

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability. Trying to find which is better.

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability with this. I am running Lion and Trying to find which is better as I know from experience not all cards are created equal. Thanks in advance for your help!

yakov536 wrote:
High Point RocketU Quad USB 3.0 for Mac is working great for me. Had an issue with CD/DVD Drive which was resolved with most current driver downloaded from the support site.
Running Moutain Lion on Early 2009, mirroring two Seagate Go Flex 2TB USB 3.0 Drives. Installed in Slot 4.
Using it primarily with VMWare Fusion for Virtual Drives. Windows, Unbuntu and other OS running really well.
HPT Support was responsive and very helpfull using the WEB Portal under the product page.
I have some comments and a suggestion:
Have you tried your setup with a SD/CF combo card reader (like the Lexar or Kingston FCR-H63)? Does the card appear on the desktop when first plugged in?
Did you need to fool around with any kind of power issues in installing this card in the x4 PCIe slot of the MacPro?
Suggestion. Have you tried one of the fixed in this article to cure the BT issues in MacPro 3,1?
Good luck.
Henry

You can't use The following message is stopping me access my disk utility. 'this version of the application "Disk Utility" with this version of OS X.' not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.

After installing Yosmite, The following message is stopping me accessing my disk utility. 'You can't use this version of the application “Disk Utility” with this version of OS X.' you have “Disk Utility” 12.1.1.
not only that my Mac pro keeps dropping my internet connection and logs on to BT Open.
Help

For whatever reason you don't have the Yosemite version of Disk Utility which is 13. I suggest you reinstall Yosemite.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Check that you have the current version of Disk Utility.

Mac Pro with X1900 - can I connect both 20" LCD and Sony Monitor?

Similar Messages

Maybe you are looking for