Mac pro won't read windows 7 install disc?

My 2007 mac pro won't read windows 7 install disc. My macbook reads the disc fine, so it is not a problem with the disc. It is 32-bit. The apple help line suggested firewire connecting the macbook to the macpro and starting the macbook in target disc mode, but other posts I have read have said that this will not solve the issue. Any suggestions?

Could be. I just rebooted and it read the disc. Unfortunately the windows install got interrupted and I had to reboot, and now it wont read the disc again. Is there any other way to install windows 7 to bootcamp, other than from the disc? Can I use FireWire and target disc my MacBook (the MacBook reads the disc just fine)?

Similar Messages

Macbook Pro won't read Windows XP disc

My Macbook pro won't read either my 32bit or 64bit windows xp discs for installation on bootcamp. The disc spins, makes a strange noise then ejects. It seems like this is a common problem. I have previously installed windows via bootcamp before and it worked fine. Normal cd's are read fine as well, just the windows discs won't read.
Any suggestions?
Thanks.

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

My Early 2009 Mac Pro won't restart after installing Mavericks

I have installed Mavericks on my Early 2009 Mac Pro and all seemed to install just fine but when I restart the Mac then it won't get past a grey screen with Apple logo. It seems that it does get reasonabley far into the startup, it gets passed the grey screen with cricling progress thingmy under the Apple logo, then it flashes very quickly and after that it is a grey screen with the Apple logo and no further.
I did try installing Mavericks when it first came out and I had this problem so I just abandoned and reinstalled Mountain Lion from my Time Machine backup. However I thought that with Mavericks now at 9.1, maybe it would work okay this time but no change. However this time I do want to get it working because the lastest Final Cut Pro X requires Mavericks and I do a lot of video editing.
Here are the things I've tried which have made no difference:
Removed all peripherals, so that now nothing is plugged in except the original Apple Keyboard, my Apple trackpad and my Eizo monitor.
I tried starting it in Safe Boot mode but this made no difference.
I started it up in Recovery mode and it will start in Recovery mode. While in Recovery mode I checked the startup hard drive with Disk Utility, the drive is fine, as and I repaired disk permisions which made no difference.
I zapped the PRAM.
I connected it to my MacBook Pro in Target Disk mode and used ProSoft's Drive Genius 3 to check over the startup hard drive again and check disk permissions and all is well.
It still will not startup
I would be most grateful if someone could assist.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My Mac Pro won't read any dvd-r discs

It reads regular dvd movies, and dvd +r fine. any suggestions? I'm running os 10.6.8 on a Quad care 2.8 gig machine. Thanks.

I had same issue with the Sony DW-D150A drive in my Mac Pro. Burned DVD with iDVD, then it would not read it. Based on looking at other threads on this, I tried the "Laser Lens Cleaner" from Target ($5.69).
Now it reads the DVD's burned with iDVD. However, it still has some issues with DVD +RW recorded by my DVD Recorder (Magnavox). My PC's and old G5 can read those fine, but they are not in the best shape (scratches).
I would definitely start with the Lens Cleaner.

Early 2008 Mac Pro won't boot after installing 2nd DVD drive

All,
I purchased a Pioneer DVR-117D from Mac Sales and after installing it in my new refurbished 2008 Mac Pro it won't boot. My MP will boot if I remove the drive. According to the Mac Sales website this drive should work fine in my MP. Any ideas as to why this is happening. I literally just got my MP today and installed the drive. Is it the drive or the Mac Pro. Thank you all.

The drive was set to master, I switched it to CS before I left for work but haven't tried reinstalling it. I will try when I get back and let you know if it worked. Thank you again.

$10,000 Mac Pro won't read $1,500 Apple Final Cut Pro DVDs. Awesome.

Have tried rebooting, updating, etc. No luck. DVD Drive just rejects the disk(s).
What does $11,500 get you from Apple? A boat anchor. Piece of crap won't read brand new Apple FCP disks, so the 60gb, 8 hour install either won't start at all, or fails about 80% of the way through. Just great.
Thing is, I also own some Macbook Pros, and the new one does the same thing.
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 13 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B08
SMC Version: 1.7f10
Serial Number:
OPTIARC DVD RW AD-7170A:
Firmware Revision: 1.N8
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds

How about
"Guy with 10k Mac Pro and FCP can't find the right forum to post in?" Need a flashlight?
This is the iMac forum, there are forums for the Mac Pro
http://discussions.apple.com/category.jspa?categoryID=194
and for Final Cut Pro
http://discussions.apple.com/forum.jspa?forumID=939
Regards
TD

Mac Pro Won't Start After Installing Security Update Tonight

I just installed the latest security update for Lion on my Mac Pro via software update. The update seemed to install fine. I was about to start work when all of a sudden the system rebooted on its own. Now it just continues to reboot because it can't complete the boot up.
I tried resetting PRAM and SMC, but this didn't help.
I tried booting up from CD using an old SNL disk. I was able to get to disk tools once. I checked my startup volume and disk tools said the volumes is fine. I was checking permissions when once again the system rebooted on its own.
I tried starting up in safe mode, but it only gets so far into the boot process before it reboots.
I tried starting in verbose mode, and noticed several SMC related errors (this is why I tried to reset the SMC). No joy.
If I leave the system sit a few minutes, it gets further into the boot process, but still won't boot completely.
Any suggestions?

Mac Pro tower or MacBook Pro notebook? Which model?
If you are encountering kernel panics, check in the logs as suggested here and post a recent kernel panic log:
http://support.apple.com/kb/HT2546
Mac OS X: How to log a kernel panic

Macbook Pro won't read windows OS disk?

Upgraded my MBP to a 500gig HD, Imaged the old to the new with carbon copy clone, everything work fine on Mac side, but when I try to reinstall windows VIA bootcamp it won't recognize the windows disk. Like it won't recognize the windows OS disk at all (no matter when I put it in). It's an OEM disk 32 bit vista or 7 (i have 2). The disks work in other machines and my MBP can see them from an external disk drive, but then bootcamp won't install them... I get a screen that goes from the apple, to a folder, to a circle with a line through it... The laptop read the Mac OS disk fine, other dvds, and cds fine. Any takers???

Hi,
first: put your XP 64-bit CD as far away from your Mac as you can. Apples BootCamp does not support it
Second: I assume corectly that these are Retail or SystemBuilder XP discs, not some Recovery CDs or manufacturere-branded ones, right ?
Third: insert the 32-bit XP CD while in OSX and check with the Finder if it can be read there (checking for the 'usual' folders on it: i386, Support, etc and files: winip51.sp2 etc.).
Fourth: some people round here have successfully used a 'standard' DVD/CD-cleaner disc with their Macs.
Fifth: try making a 1:1-copy of your XP disc. You can use SimplyBurns in OSX for this.
Regards
Stefan

My Mac Pro won't boot after installing the latest update

Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
Thanks

The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
Have you tried normal mode again after your Safe Boot?

Macbook pro won't read windows 7 DVD

I have recently purchased a Genuine copy of Windows 7 home premium. When I go to boot camp, it tells me to insert windows 7 installer disc, when i do so, it doesn't recognize it at all. Sometimes the window for an empty DVD pops up.
Please tell me i didn't waste my money and time on a windows disc that will not work.
Help me please

post in the boot camp forum.

I install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of disk. how can i reinstall my mac

i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?

If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases.

Why won't my Mac Pro sleep after Lion is installed?

Why won't my Mac Pro sleep after Lion is installed?

Tell us, what hardware add ons?
old software? that required PowerPC/Rosetta maybe.
Look for any apps, process that used powerpc and look for updates, check out RoaringApps for a table of Lion compatible programs
does it happen iwth a clean install?
how about if you do a Safe Boot?

Macbook pro won't read discs

macbook pro won't read discs. I have tried resetting the SMC & the computer itself. Any ideas

What exactly happens when you try?
Have you tried both DVDs and CDs?
Try a cleaning disk.
Otherwise it would seem that the optical drive failed.

My Mac Book pro won't read my blank cd

My mac book won't read the cd I put in. it has been since I've had it but all of a sudden it's stopped

Subject: Blank CD/DVD Not Recognized by Mac OSX
Problem: Inserting a blank CD/DVD does not automatically launch the preferred application. The report indicates "unrecognized format"
Solution: Deleted the WDNotifier.app from the "Macintosh HD - Library - Startupitems" folder, then re-start Mac OSX.
Analysis: WD Notifier is capturing the blank CD/DVD status and blocking it from being reported to Mac OSX. This appears to be a Western Digital bug in their app.
Discover of this Bug: Garry Anderson.

Macbook won't boot from install discs

I've got a Macbook C2D 2ghz superdrive from early 2007. It came with OS 10.4.8 discs (grey). Recently, the hard drive died (click, click, click). So I had to replace it with another HD, a Hitachi 160gb. I installed the hard drive, inserted the install disc 1, and powered up the system. Holding down the option key I get the grey screen and nothing happens for a long time, then the drive kicks out the install disc.
Being a PC guy primarily, I pulled out a copy of Windows XP and was able to quickly boot off that disc, partition the hard drive (>32gb fat32) and install Windows XP. So I know the hard drive works and I know the superdrive works. Process of elimination causes me to suspect the MacBook install discs (which aren't scratched or damaged).
So why can't I get the macbook to boot off the 10.4.8 install discs that came with it? Why won't the original install discs allow me to boot off of them? Is there a simple little trick that I am missing?
Remember, I had a dead hard drive so I have no backup hard drive with OS X on it. This is not a hard drive swap or a hard drive upgrade, just a pure replacement of a dead drive. I do have several external drives available to me, but none have OS X installed on them.
As for background, I am primarily a WinTel guy. I've been building computers from scratch for the last 20+ years. I also worked as a PC Tech back in the day so I've probably assembled or repaired in excess of a 1000 computers, so I'm very hardware knowledgable. However, I have a PC brain, not a MAC brain. Maybe it is just my PC logic that erroneously assumes that these install discs are bootable in the Mac world. Hopefully that isn't the case.

I figured it out, crappy discs or crappy hardware is the problem. On a hunch, I tried to see if I could clone the Apple install dvd's on one of my PC's. Since I didn't know the format of the install discs, I was unsure that would work. I cloned the install discs using Nero Burning Rom and then tried booting off the cheap Ritek dvdr's.
Guess what? The cheap Riteks work with the Apple superdrive, but Apple's own pressed cd's will not! Either Apple has crappy install media (unlikely given my PC read them fine), or the Superdrive is garbage quality hardware. I'm forgiving for hardware failures, heck I seem to eat hard drives because of my audio editing. However, I've rarely ever used the rom drive on this laptop since I do all my work with external hard drives.
I guess I wouldn't be so mad if it weren't for the Apple smugness in their superiority. It's a nice, small, lightweight laptop that got me through my last year of college (older student) with an absolutely horrid keyboard. I just expected more from the hardware given the 40% premium I paid over a comparable WinTel laptop.

Mac pro won't read windows 7 install disc?

Similar Messages

Maybe you are looking for