Mac Pro won't recognize and connect with video camera

I can't establish Fire Wire communication in FCP 7.0.3 between the device which is Canon HD 20 and my new late 2010 Mac Pro. There is no problem communicating between old MP 2006 and MBP 2008. The new MP has only FireWire 800 ports but that shouldn't make any difference, should it?. There must be something in the late 2010 MP which prevents the communication using FireWire although I can use old iSight.
Milan

No, but you do need to configure the Ethernet port in Network preferences. Open Network preferences and select the Ethernet port. Click on the Advanced button then on the TCP/IP tab. Set the Configure IPv4 drop down menu to DHCP. Set the Configure IPv6 drop down menu to Off. Click on the Apply button. If all is well you should see a valid IP address in the network settings for the port. If you see an IP address starting with 169., then it means your Ethernet port is not getting an IP address from your router. You should have an Ethernet cable connected from the Ethernet port on the computer to one of the LAN ports on your router.

Similar Messages

  • Mac Pro won't recognize ethernet connection

    My Mac Pro won't recognize the Ethernet cable when it's plugged in. I know the cable and connection are good because my MacBook Pro recognizes it with no problem. I've had it for around a year, but have always used the airport to connect to the internet. It has two Ethernet ports on the back and I've tried both. Is there anything I need to do to configure the NIC card?
    Thanks in advance!
    Ryan

    No, but you do need to configure the Ethernet port in Network preferences. Open Network preferences and select the Ethernet port. Click on the Advanced button then on the TCP/IP tab. Set the Configure IPv4 drop down menu to DHCP. Set the Configure IPv6 drop down menu to Off. Click on the Apply button. If all is well you should see a valid IP address in the network settings for the port. If you see an IP address starting with 169., then it means your Ethernet port is not getting an IP address from your router. You should have an Ethernet cable connected from the Ethernet port on the computer to one of the LAN ports on your router.

  • My new Mac Pro will not recognize my old Canon video camera

    My new Mac Pro will not recognize my old Canon video camera

    We've used the 400 to 800 firewire cables with limited success in the past...dropped frames was the main problem. Only used them until the Sonnet FireWire PCIe Card came in to allow a 400 firewire.

  • I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibited ted sign. Any suggestions pls.

    I've updated to yosemite from Mavericks, but since i can't connect to the internet I used my time machine back up which was march 2013. Now my macbook pro won't start and ends with a prohibted sign. Any suggestions pls.

    Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    OS X Mavericks- Erase and reinstall OS X
    OS X Mountain Lion- Erase and reinstall OS X
    OS X Lion- Erase and reinstall Mac OS X
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • MBP 9,2 no longer recognizing my 3rd Gen Apple TV - wife's MPB 8,1 recognizes and connects with no issues.

    My MBP 9,2 (2.9GHz i7/8GB/750HDD) no longer recognizes my 3rd Gen Apple TV while my wife's MBP 8,1 (2.3GHz/4GB/320HDD) recognizes and connects with no issues. All are running current software.

    Hello herbnmyth,
    Thank you for using Apple Support Communities. 
    I see that you are having difficulties with connecting the Apple TV with your computer. The following article provides information for troubleshooting Home Sharing and should help you sort the connections. 
    Troubleshooting Home Sharing - Apple Support
    Regards,
    Jeff D.

  • Mac Pro doesn't recognize BluRay burner with Lion

    My Mac Pro would occasionally recognize my Blu-ray DVD burner, now with the Lion update, not at all.  My Apple Superdrive is recognized in Bay 1, but not the Blu-Ray in Bay 2.  Is there any way I can get my blu-ray burner to show up and be usable?  I have used Toast Titanium Pro to burn several BluRay discs before on this computer, but with Snow Leopard; even then, I would have to re-boot the Mac Pro in order to get it to remember it.

    Look back a couple months for a long thread on BR burners and support.
    Also, check and see what OWC sells and supports, and what 3rd party softare or from the vendor of course.
    Seemed like BR drive not being "present" after waking from sleep was one issue, or affecting sleep mode. Just like yours.
    I don't see that you include the make etc, you might consider that of interest.

  • My Mac Pro won't recognize my JVC Everio Micro SD Camcorder

    Hello,
    I have a JVC Everio Micro SD Camcorder, and my Mac Pro can't recognize it, I think I need a driver from JVC, but I can't find the download link, anyone have a clue?

    You posted in the "Intel iMac" Forum.  I would suggest you try reposting in the "Mac Pro Forum".
    Hope this helps

  • Mac Pro won't start and display has no signal?

    My Mac Pro goes to sleep and won't start. The display doesn't have a signal. What is wrong?

    After a few hours of trying to work things out...I've discovered its related to the ATI Radeon 2600 HD XT Card (dual cards and monitors). Once I remove one card from each machine the systems started but the monitors remained in what looks like suspended mode display "No signal".
    Tried to download firmware update. My system wouldn't allow the installer to work. Apparently already have the firmware.
    The Display icon shows only four choices for the monitors resolution. On my working systems there are at least 15 resolution settings. Where is the ATI Radeon software on the system. The About this Mac doesn't show any Graphics or Display information.

  • My 2007 mac pro has a slow internet connection with lion

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

  • Mac Pro won't recognize Cintiq 21UX DVI monitor

    The Cintiq works ok when connected, but is listed in the sysytem profiler and monitor preference panel as just "VGA display". It is hooked up to the mac with a DVI cable and the switch on the Cintiq is set to DVI.
    I have a feeling I'm getting poor resolution from graphics apps (esp. Photoshop CS3) as a result of this.
    Can anyone tell me why the Cintiq isn't recognized for what it is?

    Malcolm, thanks so much.
    I was just having this problem with the Cintiq as VGA monitor, and would NEVER have looked in the box for that adapter. And even looking at the adapter in my hand, I could not really see what was particularly different about it. But I used it and, as reported, it worked like a charm.
    The funny thing was that I had been using the Cintiq on my Power Mac G5 for about a month, with no problems, EXCEPT when I pulled the computer out of Sleep, and then suddenly the Cintiq went VGA on me. I'd reboot and all was corrected. BUT the real problem came up tonight, I am just setting up a new Mac Pro, and the Cintiq was just VGA all the way, boy was that frustrating. I was dumbfounded. It's Sunday night, and where the heck am I going to find a clue about all this. Well, the Discussion Forum wins again!
    Thanks again
    Todd

  • Mac Pro won't recognize airport card or existing network

    I have a 2007 Macbook in the house with an old Belkin MIMO router. the wireless netwrok works fine. In fact, my son waltzes in and says "hey what's the wireless password?" and logs on INSTANTLY on his Macbook Pro.  Now we have a (desktop) Mac Pro with a new Airport Extreme card, and the Mac Pro cannot find the network - it's only 5 feet away. The name of the network does not appear where the network names should populate. We've typed it, and the WPA password in 100 times, and nothing, justs keeps asking the same question. Filling in PPPOE info doesn't work either.
    NOTE: We do NOT have the airport extreme base at this house. We simply want the Mac Pro to FIND the existing network (Belkin wireless router and good old Airport on the 2007 Macbook so the Mac Pro can get on the internet wirelessly.
    Anyone have any ideas? Is the bios just not recognizing the new Airport Extreme card? How should it be configured?
    Thank you!

    There are four tiny black wires inside, three of which must be correctly connected to the AirPort card before you have any hope of connection over wireless.
    Stay away from PPPoE unless you have been told by your ISP that there is no other possible way to log on to the internet.
    Turn OFF IPv6 if possible.
    If the card is functioning, you get an Airport/WiFi pane in System Preferences > Network. You will also see it in System Profiler.

  • Mac Pro won't recognize USB devices

    Hi all,
    My Mac Pro does not seem to recognize cameras (Canon Vixia and GoPro White) or card readers (USB 2.0).  When I restart the computer, it recognizes the Vixia, but automatically opens iTunes, where it's not intuittive how to copy just the folder to an external hard drive.  Why is this?  Is there a fix?  I tried running the firmware update, but received an alert that the update was not compatible with my machine. 
    I'm using a 3.7 GHZ Quad-Core Intel Xeon E5 with 16 GB RAM, running OS 10.9.3.
    arice77

    I had a similar problem that arose because Apple over-rode the original USB drivers with a kernal extension.
    UNloading the extension fixed my problems. Perhaps it will help you.
    In a terminal, type this:
    sudo kextunload -b com.apple.driver.AppleUSBFTDI
    If it solves your problem, keep in mind you'll have to do it after every reboot (a good use for command line history.)
    If it doesn't, you can put it right back with this:
    sudo kextload -b com.apple.driver.AppleUSBFTDI
    Hope that helps. I should also warn you that in my experience, 10.9.3's USB performance is terrible.
    --Ben

  • The calendar app on MacBook won't recognize and sync with IPad and Iphone after upgrading to Yosemite and Server 4.0

    After upgrading to Yosemite on our mac mini (from OS X 10.9) and V4.0 to Server (from 3.2), the calendar app on MacBook won't recognize the account and won't sync with IPad and Iphone. Even after giving password over and over again. I get the following message: 
    De server reageerde met
    '500'
    op de bewerking 'CalDAVAccountRefreshQueueableOperation'.
    (Server responded with '500' on task 'CalDAVAccountRefreshQueueableOperation'
    Anyone idea?

    update to my original post:  after searching since for the past 10 days - I did want to pass along to others with an iphone calendar sync problem the following resource:
    Mac OS X: Resetting the SyncServices folder
    http://support.apple.com/kb/TS1627
    This is the preferred solution for problems with sync with calendar and other apps between iphone and MaciOS.  This did solve the problem which developed that no items from iCal were copying to Iphone, such as new calendars I would add, but the original problem has not been fixed by this reset.

  • Mac Pro won't recognize i-pod nano (2nd generation)

    when i hook my nano (2nd gen) up to my mac pro, it opens in i-tunes, but it's all grayed out. it charges, but i can't play anything off of it, and i can't drag anything from i-tunes on to it. also, i noticed my i-pod icon doesn't appear on the desktop when plugged in. i've reset this i-pod to the factory settings and it doesn't change anything. i've also held down the menu/select button for a few seconds (per other discussion threads i've read) and it doesn't solve the issue. finally, i've restarted my computer with the i-pod still attached and nothing changes.
    this product may have originally been set up through a PC, but i don't see that being part of the issue.
    any suggestions, guys?

    I have the same problem with my 2G nano and MacBook Pro. This ipod has never been connected to a PC, so I don't think that's the issue.
    See similar thread at
    http://discussions.apple.com/thread.jspa?threadID=2169484&tstart=0

  • My bran new Mac Pro, won't recognize my external hard drive?

    Hello,
         I just got the new mac pro about a month ago (the cylindrical kind) it has 16 MGs of ram and 250 GBs. I got a 2 TB external hard drive for time machine, and i already have a 500 GB portable hard drive for transferring files. They worked fine initially, but the computer has stopped seeing them all together. I've already restarted my computer several times. I plug them in, they light up, but the icon doesn't appear on the desktop or finder or even in disk utility. I've tested my portable drive on my laptop and it works fine, so its not the external hard drive or the cords. I also tested a flash drive and an external CD drive in the USB ports and they work fine, so i've deduced that its not a hardware issue. The best i can come up with is that its a softwear issue, but i have no idea how that would even work. Has anyone else heard of this?
         On a side note: before the computer stopped reading my hard drives, they kept unplugging themselves and saying "this hard drive was not removed properly" and then they would reappear without me touching them. I'm pretty sure this is the root of the problem. I'm out of ideas and google hasn't revealed anything to me, so if anyone knows whats going on i would really appreciate it.
    Thanks.

    Neither hard drive is working on the mac pro. They do not appear in disk utility.
    My chords seem fine. I don't have another cable to try on the Mac Pro. but both cables worked on my 2011 macbook pro with my external hard drive. my 2TB didn't work on my macbook pro however... it didn't even appear in disk utility. I wonder though if that has to do with the usb 3. I know my laptop has USB 2 and my external hard drive is USB 3 and i'm not sure if its backwards compatible.
    I have tried all of the USB ports on the Mac Pro, the hard wear seems fine.
    I will try resetting the SMC shortly and see if that works.

Maybe you are looking for