Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding

Mac Pro wont software update and a lot of apps keep freezing/crashing/not responding Im on OSX Lion and i have a Mac Pro 1.1 please help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I have a 2009 Mac Pro 10.8.3 and half of the time Disc Utility doesn't respond?  Any ideas?

    I have a 2009 Mac Pro 10.8.3 and half of the time Disk Utility doesn't respond and I have to force quit and restart the machine.  Any ideas?

    You have some (major) issues.
    Are you in Recovery Mode ? Used Option key or Command R to get there?
    I would grab the ML installer ESD you saved and do a clean install on another drive and begin to rebuild to a new system.
    You may or may not have TimeMachine but have backed up problem files.
    Having a bootable backup clone of your system is a must.
    Hard shutdowns will add more layers of problems and add to whatever there was before.
    Generally there is not a need to use Disk Utility other than to repair permissions either before or after installing updates.
    Have you:
    tried with everything else unplugged so you don't have any external devices
    tried with a safe boot
    Why.
    After any forced shutdown you should use ML Recovery and one Safe Boot on the first next boot from a working system.

  • Mac Pro with software raid and upgrading to Snow Leopard

    Not sure if anyone else has experienced this but here goes. I have a mac pro with 4 500G drives using the onboard software raid. When I insert the Snow Leopard disk and try to install, it fails to find the raid. Is there a trick to get this to work?

    Thank you SSSOOO much Greg818. I was pulling my hair out over this problem. I even went so far as to do a full Leopard install with Snow Leopard update on a USB drive and them cloned it over to my RAID 0 array using SuperDuper hoping that this would solve the problem. It seemed to in the sense that the clone went fine but then when I would try and boot from the array I would get the Apple Logo and spinning wheel but it just kept spinning and spinning until finally the Apple logo was replaced by the Do Not Enter symbol(you know the circle with the slash through it).
    So came here and found this thread. Your solution worked like charm!!! Once again thank you so much... you saved me from being bald.

  • After up dates and clearing history and cache disks and defraging, fire fox is not handling farmville . keeps freezing or "not responding. up dated flash player and java script so what is the problem that you cant keep up with the games.

    the last 2 times i updated fire fox, from the start it began "not responding".and its not handling any thing my yahoo homepage or anything else.it is slow and unresponsive to any thing. have updated constantly everything that should be and cleared history . my pc is hp and not a year old . have maintained my pc. what is wrong with fire fox. have been told google chrome is better for facebook game but dont like chrome.

    Hi a, Glad you removed Norton. On Skype, go to Tools & Manage add ons. Find any add ons that pertain to
    Skype and Disable them. Once these problems have been solved then you can always enable any that have been disabled.
    Anytime you lose an Internet connection you will receive those kind of errors. Wireless connections are subject to a loss of signal. I would contact your Carrier and report them.
    Any site or game that tells you to update Flash Player, ignore. You did the right thing going to Youtube. If that works, then disregard anything to the contrary. That site is having a problem, not you. Take care not to disrupt your Flash Player Installation!!
    On Avast not being able to update would most likely be due to the loss of signal. That Avast updated 3 times is not unusual. That is just a sign of additional risks. I had Avast and during some periods that was done also. No problem.
    While you are still in the process of removing programs and troubleshooting, if there are any add ons/plug-ins/extensions that are causing an issue, I would disable them. Once you have your troubleshooting done, then see about them.
    On McAfee, didn't that Install with FP at one time? I think you removed that as I recall. You can refer to the instructions I gave you to remove it and make sure it is not there.
    Thanks,
    eidnolb

  • Mac book pro downloaded software update and now it wont start. Ideas?

    macbook pro downloaded iOS6 and then when I rebooted i get a blank screen with apple logo and 3 beeps. What to do?

    Three beeps on startup usually indicates bad RAM. Have you replaced your RAM modules recently? One or both modules may have just failed. The best thing you can do is take your machine to your local Apple Store or AASP and have them run diagnostics. I don't think it would have anything to do with an iOS download.
    Clinton

  • I was updating my laptop and now have a kernal error and cannot get anything to reinstall or start up properly.  I believe that I had a power outage when my mac air was in the middle of a software update and now I am stuck

    I have kernal error after power outage in the middle of updating mac air
    a software update and now I am stuck

    You didn't have enough battery power left when performing the update, and it died? That's bad.
    You should be able to reinstall OS X using OS X Recovery or in the case of an older MacBook Air running Snow Leopard, by using your original System Install DVD and Remote Install OS X from another Mac.
    Reinstalling OS X does not erase your user accounts or data.
    OS X Recovery:
    http://support.apple.com/kb/HT4718
    Remote Install OS X:
    http://support.apple.com/kb/HT2129

  • Updated to 10.6.8 software update and itunes not working

    I recently upgraded to 10.6.3, then installed the 10.6.8. I have tried using the software update and it tells me that my network is not available, but when I when the check it says everything is fine. I have tried to connect to the Mac App store & Itunes and it gives me the same error message. Any ideas???

    Did you use the Combo update.   This is the route to go; then software update (about seven of them).
    Mac OS X 10.6.8 Update Combo v1.1

  • I recently did a software update, and now all my macbook pro i7 processor does is beep and it wont start up. Does anyone have any solutions?

    Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?

    It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.

  • I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    I bought a second hand G4 iBook with iLife 09 on it.  I have copied iLife to my new Macbook Pro. The applications would not open, so I did a software update and update all three applications, but they will still not open.  Can anyone help?

    The seller should have given you the original disk so that you can reinstall as needed. But it likely was a single-user license (which really means single computer) so you can only have a copy on one computer at a time. If the seller didn't give you the disk he is probably still using the software on his new Mac. Your best option to get any of the iWork apps to use in OS X 10.6.6 or later is through the Mac App Store. You can then install them on any Mac you have that has access to the Mac App Store using your Apple ID.

  • I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

    I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
    Is there anyway to back up this corrupted drive so I can restore my applications later?

    There's an old saying.  If you don't have a backup disc, then there must be nothing important to backup.  That's just lesson #1.  Lesson #2 is to never interrupt a software update.  Not a good thing.
    OK, I'm sure you know this.  It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
    You're pretty much in a bad place.  My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed).  You might be able to see your user folder and some of your apps.  I wouldn't even consider copying the library, because who knows what's been corrupted in there.
    Good luck.

  • HT1338 I have a Mac pro i believe 2008 and my software is 10.5 i think.. should i upgarde tp 10.6 first and then to OS X Lion?

    I have a Mac Pro, i believe from 2008 and my software is 10.5 i think.. should i upgarde to 10.6 first and then to OS X Lion?

    You'll need to call the online Apple store, which in the US is at 800-MY-APPLE to buy OS X 10.6 Snow Leopard. Install OS X 10.6, do Software Updates and you'll be at OS X 10.6.8.
    Then call the online Apple store again (or when you call them to order 10.6) and purchase a code to download OS X Lion (you can't see it in the App store anymore). In a couple of days, you'll get an email with the code that you can then use to download it from the App store. You need to be at OS X 10.6.6 or better to access the App store. 
    You'll need 2GB memory minimum for Lion and 4GB is recommended.

  • I`ve just bought a Mac Book pro 15", did the required updates and since two days ago it freezes. Now I can´t even start the computer. the screen is allways white. how can I solve this issue??

    I`ve just bought a Mac Book pro 15", did the required updates and since two days ago it freezes. Now I can´t even start the computer. the screen is allways white. how can I solve this issue??

    The same thing happened to me... Since two days the ******* thing keeps freezing after a while. Then I try to reboot and the screen goes white and it doesn't boot. If I wait like half an hour it boots again.
    I thought it was a hardware problem, but the Apple Hardware Test founds nothing at all. I think it has to do with the software update I performed 2 days ago.
    (MacBook Pro 15" Early 2011)

  • HT5381 i did a software update and now mail wont open at all

    Help......my mail app is coming up with an error "You can't use this version of Mail with this version of Mac OS X".  Can I uninstall the update?

    !! WARNING !!
    about the September 2012
    "Security Update 2012-004"
    If you've got "Mail.app" in a folder OTHER THAN the root "Applications" folder,
    MOVE "MAIL.APP" TO THE APPLICATIONS FOLDER
    **BEFORE** INSTALLING THE "004" UPDATE!!
    Because *IF* you use OSX's integrated Software Update app from the Apple menu to do the "004" updating, and *IF* your Mail.app is NOT in the Applications folder, then buddy, you've got some sitdown fixit time ahead of ya and/or some internet tie-up time downloading the "004" update file itself.
    Been through it all, already.  In fact, just got done getting my Mail back up & running. And I tried everything short of attempting to unpacking my "Mail.pkg" receipt file using... whatever... even Pacifist couldn't get it out. So that fixit "Plan D" died quick. And I'm not savvy enough to use Terminal commands to do "Plan E," so that SUDO stuff was my brick wall.
    So I compressed my entire "Mail" subdirectory that contain all my emails, for safekeeping during the required surgery, or whatever would work, leaving the original Mail directory where it was. In case something bad happened in all my fixit whatevers, the one thing I *didn't* want to cross paths with was a hosed Library -> Mail folder. Then I'd be pssd. But I can wipe out that ZIP now 'cause all's well now. After 6 hrs of downloading thru a mobile broadband hotspot running at only 14KB/sec speed due to my having gone over my T-Mobile hotspot plan's bandwidth amount (throttled-down after reaching the limit, tho not cut off completely. Kinda nice, but it's a huge speed drop).
    I tried moving the two Mail.app versions around, compressing them & then trashing the original so they wouldn't be recognized, blabla, even booted my Mac in Safe Mode & reinstalled the "MacOSX 10.6.8 (Snow Leopard) Update Combo.dmg" update file, which in the past has fixed many problems. But after restarting, not this one.
    Like a dummy who ignored knowing better, I had my Mail.app in a folder other than the Applications folder, with only an alias to that being in the Applications folder. NOT GOOD ENOUGH. The updater don't see that as nuthin special or useful.
    So if you've got, like I've got, "old" icons for Mail.app (v4.5) in your Finder toolbar & in your Dock that all point to "Mail.app v4.5" in whatever folder you've got that in, other than in the Applications folder (where Apple apparently REQUIRES that it be located, and ONLY there, at least for OSX updating purposes), then after you download & autorun that "004" updater using Software Update, NONE of your pre-existing Mail icons will work. And MOST aggravatingly, **NOR** will your brand-new "Mail.app v4.6" work that came out of the "004" updating installation.  So basically, your Mail.app's... all of 'em.... are hosed. But only if you run the "004" update without your "Mail.app v4.5" being located in your Applications folder and ONLY in your Applications folder. And duplicates of Mail.app, scattered around your HDD??  Always a problem with many Apple apps.... The Apple software engineers apparently like 'em to be in the Applications folder, and in ONLY there, and ONLY the latest version, and ONLY 1 single copy of each on your entire HDD. They just don't seem to stress that enough, it appears. Kind of an oversight for them to not emphasize that, IMO...
    My recommendation for this particular September 2012 "004" update:
    If you run Software Update, and if you see the "Security Update 2012-004" listed as available for download, UNCHECKMARK IT.  DO NOT DOWNLOAD IT USING SOFTWARE UPDATE !  Instead, download the actual update file itself.
    Same thing, only a different way of doing it. Most importantly, you'll be skipping the auto-installation that Software Update performs.
    AND you'll have that update file on your HDD for future fixits, should a nasty "unfixable" problem come up.
    First, #1. Do a filename search for "Mail" (Option-Command-Spacebar). Scroll down to where the "Apps" are located in the list under the "Kind" column heading. First, find your Mail.app that's v4.5. Get that bugger into your Applications folder if it's not already there. Next, Trash all other "Mail.app" apps you see in that same list that you may have elsewhere on your HDD.
    #2. Go here: https://support.apple.com/kb/DL1586
    And download the actual "004" DMG update file: "SecUpd2012-004.dmg"
    And of course, it's a biggie.... 270MB... so watching grass grow may be involved here if you've got a slow connection (go to a MacDonalds & do it, like I shoulda done).
    3. After downloading, I'd recommend closing down all apps, emptying the Trash, and restarting.
    Then, after restarting, run Disk Utility's "Repair Disk Permissions."
    Then, doublecheck that the Mail.app version 4.5 is in your Applications folder.
    THEN fire up & install "SecUpd2012-004.dmg."
    Reboot.
    After the reboot, your Mail.app version 4.5 in the Applications folder will have become Mail.app version 4.6 in the Applications folder, and all will be well again.
    And you can dump that zipped-up "Username -> Library -> Mail" folder then, too.
    Happy Mac'in!
    Kevin Kendall
    Macbook 7,1
    (Apple's very last all-white Macbook model)
    2.4GHz - 256GB Crucial SSD - 8GB Crucial RAM
    OS 10.6.8 Build 10K549 + Win 7 Ultimate thru VMWare Fusion v5.0.1

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Maybe you are looking for