Mac: Problems with certain characters in the editor

I have now downloaded the production version on my Mac and it runs just fine. The first thing I see is that the painting problems with the close icons etc. have been fixed. Thank you for that. But I still have trouble typing certain characters in the editor. I haven't reported that yet, but I have seen others report similar problems caused by missing support for international keyboards. The characters that I cannot type are |\[{]} which is pretty annoying when you're writing Java code. :-) It works fine in normal Java text fields. On my Norwegian keyboard I normally input all these characters by typing 7 and 8 combined with option or option + shift.

Check if database characterset supports these special characters
check client's nls settings.
check client machine's language settings (converts characters in driver level)

Similar Messages

  • Problems with special characters in the data.

    Hi All,
    Whenever, I'm trying to data such as "Lämmerzunge" which are having some special characters in it, it is storing them as L�mmerzunge. Is there anyway to handle these?
    Thanks in advance.
    Regards,
    Venky

    Check if database characterset supports these special characters
    check client's nls settings.
    check client machine's language settings (converts characters in driver level)

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • Problems with Photoshop cs4 for the Mac

    I am having all kinds of problems with Photoshop CS4 for the Mac.  When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop.  I drag a photoshop file over the application icon, the whole screen flickers and nothing happens.  I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit.  I can repeat this pattern over and over.  What is happening?  How do I solve this problem?
    --Kenoli

    Thanks for the reply.  I am using  Photoshop 11.0.1.  I am using the latest version of Snow Leopard.  I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now.  My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac.  Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while.  I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply.  Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
    The problems with Photoshop  (starting with just taking a long time to load)  have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software.  I will report if problems go away.
    Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere.  However, I couldn't find anything and I don't use two monitors.
    So . . . Adobe just seems to be getting more expensive and more buggy.
    Incidentally, why is it still running in Rosetta rather than natively?  Adobe now has a real Intel processor to work with.
    --Kenoli

  • I am having problems with certain websites that require adobe flash player because of the restrictions that apple has put in place. Is there a way to get to sites that require flash player?

    I am having problems with certain websits that require adobe flash player

    Please don't start the 1 millionth thread on this subject, which has been answered over and over and over and over and over and over and over.........Use the search bar and type flash and you'll see thousands of posts on this.

  • HT1338 We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    We are currently running CS3 on Macs with OS 10.5.8 but need to upgrade the OS in order to prepare e-books. Will we have any problems with CS3 running on the later OS?

    Check the Adobe website for compatibility.
    Ciao.

  • Problems with Turkish characters not displaying correctly

    A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
    The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material.  Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
    Helvetica LT CondensedLight
    Turkish character “ İ ” does not display correctly in either Word or InDesign.
    Gill Sans
    Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
    My questions are:
    1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
    2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font.  Is this because the font is newer and includes the additional characters?  Would this work in InDesign?

    One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
    It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
    As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
    http://www.babelstone.co.uk/Unicode/babelmap.html
    but I personally prefer the downloadable .exe file.

  • I'm having trouble with certain buttons on the Ebay pages.

    I'm having trouble with certain buttons on the EBay pages. Like enlarge, other pictures,add to my watch list, etc. this happened after I upgraded to 8.0. I have tried to upgrade java but the java console will not work ?? tried all this in my other browser and all works fine. What do I do? Thanks

    If it happens again then try to reload the website or clear the cache and the cookies from that website.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • I have new Ipad...MacBook Pro with Mountain Lion:  I have problems with certain applicaitons not sync'ing (like email, cal, notes)...need help

    I have problems with certain applicaitons not sync'ing (like email, cal, notes)...need help

    There are a few twists here. This is my opinion of a quick and easy way to do what you want to do.
    Get a 2.5" sata enclosure like this one - this is just a sample:
    http://www.amazon.ca/eForCity-2-5-inch-SATA-Enclosure-Blue/dp/B0083OOV9G/ref=sr_ 1_1?ie=UTF8&qid=1360012807&sr=8-1
    Put the new ssd in the enclosure, connect it to the Mac using the included USB cable. It is now an external drive.
    Format the drive using Disk Utility.
    Download and run Carbon Copy cloner, and clone your drive to the new external.
    Shutdown. Open the MBP and remove the SSD drive from the enclosure and put it in the place of the old drive.
    Boot the MBP. Once you know the new drive is up and running, you can get to the process of installing the old one in the optical bay.
    http://mac.tutsplus.com/tutorials/hardware/how-to-upgrade-your-macbook-pro-to-an -ssd/

  • Problems with special characters like "u00F6" "u00E4" "u00FC"

    Hi,
    we currently face some major problems with special characters like "ö" "ä" "ü". First I thought it is a SP02 specific problem but it still doesn't work with SP03.
    When I start an import the import manager shows correct converted value. "ö"s "ä"s "ü"s are displayed correctly. But after I've done the import I look into the Data manager and I see instead of these characters charcaters like "̈". (note: the character should show a little square box - but the forum cannot desplay it)
    How can I solve this problem?
    Regards
    Nico

    Hi Nico
      Just try it out the following steps, hope it solves ur issue.
    <b>To set one or more values back to their original values:</b>
    1. In the Import Manager Source Values grid, select the values that you want to set back to their original values.
    2. Right-click on one of the values and choose Set to Original Value from the context menu, or choose Values > Apply Value Conversion Filter > Set to Original Value from the main menu.
    3. MDME sets each value back to its original value, which appears in black in the Source Values grid.
    <b>NOTE : You can use the Set to Original Value filter only at the value-level and not at the field level.</b>
    thanks
    Alexander

  • Problems with special characters in InputStream or XPath

    Hello everyone,
    I am having problems with special characters such as ", ', - and so on, everything becomes ? (questionmark). (Not with special nordic characthers (å,æ,ø) though.)
    The encoding of the XML is UTF-8, and the server that holds the webservice is setting encoding to UTF-8 also, so no conflict there.
    What I have done is something like this:
    {code}
    String url = "http://www.formula1.com/rss/news/latest.rss"; // This is not the feed I use, it is a custom XML document
    InputSource is = new InputSource(url);
    DocumentBuilderFactory fct = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = fct.newDocumentBuilder();
    Document doc = builder.parse(is);
    Element rootElement = doc.getDocumentElement();
    XPathFactory factory = XPathFactory.newInstance();
    XPath xPath = factory.newXPath();
    out.print(xPath.evaluate("/rss/channel/title", rootElement)); // The xml is not a RSS feed, this is just an example.
    {code}
    Please let me know what I am doing wrong, or give me a hint of how to solve this in another way.
    Best regards,
    G.Hansen
    Edited by: G.Hansen on Mar 24, 2009 2:39 AM

    Hello, thanks for you reply. I had to rewrite your code a little, and I think that your code would not really compile, if you tried yourself :-)
    I ended up with something like this:
    our environment is running in 1.4 mode, so I could not use the for-each loop :-(
    public String printEntities(String s) {
         char[] sArray = s.toCharArray();
         StringBuffer sb = new StringBuffer();
           for (int i = 0; i < sArray.length; i++) {
             if (sArray[i] > 256)
                  sb.append("&#x" + Integer.toHexString(sArray) + ";");
         } else
              sb.append(sArray[i]);
         return sb.toString();

  • When I make a project in iDVD'09, there are sometimes green blocs with points flickering in some scenes of my iMovie-film. In iMovie there is no problem with this film, but the problem begins by exporting to iDVD and making a project there.

    When I make a project in iDVD'09, there are sometimes - at voluntary moments - green blocs with points flickering in some scenes of my iMovie-film.
    In i-Movie there is no problem with  this film, but the problem begins by exporting to iDVD and making there a project.
    Who can help me, then I cann't find everything about this in any forum?

    Hi
    Can be a problem that get multiplied and visible when iDVD encode for DVD.
    A. See if problem can be isolated to a single frame in the movie and re-import this clip and see if it's better
    B. When free space on Start-Up hard disk goes low - strange things like this might occure. I never go under 25Gb free space on this Start-Up Mac OS hard disk !
    C. Does this problem arises what ever encoding quality You use ?
    Yours Bengt W

  • How to send Oracle rowid to servlet? | Problem with national characters.

    There is same possibility how to send rowid to servlet?
    I have now definition like this:
    <af:image source="/imageservlet?Par1=#{bindings.Col1.inputValue}"/>
    But If column contents national characters, servlet methods obtained changed these characters.
    My idea is to use not primary key for row, but use oracle rowid. It is simply possible?
    Use something like this:
    <af:image source="/imageservlet?Rowid=#{bindings.Rowid}"/
    Or Do you have ideas how to solve problem with national characters ?
    Thanks
    FiL

    Hi,
    Although your workaround works.
    I think this is a simple encoding problem.
    I simply need to make sure all parameters and pages are encoded with a char set which contains the national characters you mentioned.
    This is a bit dependent on the exact technology your using, but most can be done via the web.xml:
      <jsp-config>
          <jsp-property-group>
              <url-pattern>*.jsp</url-pattern>
              <page-encoding>UTF-8</page-encoding>
          </jsp-property-group>
      </jsp-config>     This forces all JSP pages to be encoded in UTF-8
    Adding the following parameter sometimes helps as well, although I think this one is a bit dated:
    You said your using a servlet so your servlet needs a similar block for its pattern
      <context-param>
        <param-name>PARAMETER_ENCODING</param-name>
        <param-value>UTF-8</param-value>
      </context-param>If you want to be 100% sure the encoding is set right make sure thepages contain:
    <%@ page contentType="text/html;charset=utf-8"%>Or depending on your view technology the syntax can be a bit different
    -Anton

  • Problem with national characters on windows client

    Hello there,
    I'am having problem with national characters on windows client.
    All national data stored in NVARCHAR2 colums, applications (.net) works fine,
    but in sqlplus:
    select city from test_table;
    - everything ok, sqlplus shows national characters
    select dump(N'<national symbols>') from dual
    - returns
    Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
    select * from test_table where city = N'<national symbols> '
    - always returns nothing
    As i understand the problem in
    sql query text (and national literals) convertion
    to servers "WE8ISO8859P1" encoding, Is it possible
    to solve the issue?
    Thanks in advance
    PS.
    Console in right mode (chcp=1251)
    sqlplus shows russian messages well
    Server (oracle 9 on solaris):
    select * from nls_database_parameters
    NLS_NCHAR_CHARACTERSET AL16UTF16
    NLS_SAVED_NCHAR_CS WE8ISO8859P1
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS .,
    NLS_CHARACTERSET WE8ISO8859P1
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
    NLS_DUAL_CURRENCY $
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_RDBMS_VERSION 9.2.0.6.0
    Client (windows server 2003, oracle client 10):
    NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

    N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
    In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
    -- Sergiusz

  • I have problem with connect me to the internet

    Hi, I have my apple TV and always I had problem to connect me to the internet I don't know why because I have my Mac, and Iphone that don't have any problem with internet and is the same server.

    Ccan you elaborate on the issue?

Maybe you are looking for