Mac Projector files aren't publishing after months of working fine

I've published Mac projector files and .exe file from Flash CS4 for several months without issue. For the past week when I've published Mac projector files the .app icon appears on my desktop but when I try to play the file the dock opens but the file doesn't play. Any Mac projector files I published prior to this problem play fine.
I've tried creating a new .fla file and have reinstalled Flash but I'm still having the problem. EXE files and SWF files play fine. Also, the Mac projector files publish at about half the file size they did before this problem, while the EXE and SWF files are the same size.
Any help would be greatly appreciated.
Thanks,
Luke

There is a workaround solution I've found online.
When publishing your Mac projector file, also publish the movie as an SWF. Name the SWF file: movie.swf
1. Hold down the Control button and click on your Mac Projector file icon.
2. Select Show Package Contents from the menu.
3. Put the movie.swf file in the root level of the Resources folder.
Now the projector file should play.

Similar Messages

IPv6 prefix delegation: after months of working fine, today no prefixes available

Subject says it all. After months of having a /64 prefix delegated to my home network and working pretty reliably, today the dhcpv6 client is reporting: IA_PD status code NoPrefixAvail: "No prefix available on Link 'wa-bellevue-ten04-". Suffice it to say I can't get a /64 allocated. Can someone investigate?

I am seeing the same issue, it started yesterday (16 June 2015) sometime in the afternoon. I discussed this with Comcast support today, and was told that they will not help because my cable modem is my own (I don't rent one) and they therefore have no access to my modem. I am skeptical that this is a problem with my modem, as this (a) worked in the past, and (b) iappears that the DHCPv6 packet from Comcast is denying a prefix delegation: Jun 17 12:18:05.357 PDT: IPv6 DHCP: Received ADVERTISE from FE80::21D:70FF:FECC:58E2 on FastEthernet0
Jun 17 12:18:05.357 PDT: IPv6 DHCP: detailed packet contents
Jun 17 12:18:05.357 PDT: src FE80::21D:70FF:FECC:58E2 (FastEthernet0)
Jun 17 12:18:05.357 PDT: dst FE80::216:C7FF:FE7C:BFBC (FastEthernet0)
Jun 17 12:18:05.357 PDT: type ADVERTISE(2), xid 12121931
Jun 17 12:18:05.357 PDT: option CLIENTID(1), len 10
Jun 17 12:18:05.357 PDT: 000300010014A412E3B0
Jun 17 12:18:05.357 PDT: option SERVERID(2), len 14
Jun 17 12:18:05.357 PDT: 0001000117323D5614FEB5D6E776
Jun 17 12:18:05.357 PDT: option IA-PD(25), len 71
Jun 17 12:18:05.357 PDT: IAID 0x00020001, T1 0, T2 0
Jun 17 12:18:05.357 PDT: option STATUS-CODE(13), len 55
Jun 17 12:18:05.357 PDT: status code NOPREFIX-AVAIL(6)
Jun 17 12:18:05.357 PDT: status message: No prefix available on Link 'wa-everett-ten05-link-S'
Jun 17 12:18:05.357 PDT: option PREFERENCE(7), len 1
Jun 17 12:18:05.357 PDT: preference value 0
Jun 17 12:18:05.357 PDT: option DNS-SERVERS(23), len 32
Jun 17 12:18:05.357 PDT: 2001:558:FEED::1
Jun 17 12:18:05.357 PDT: 2001:558:FEED::2 I do receive a /128 IPv6 unicast address for my router itself, and it can access the internet at large via IPv6. Comcast support did confirm that I should be receiving a /56 delegation.

Sound works for all programs in Windows 7 (64-bit) except iTunes (64-bit) which stopped working after months of working fine.

Sound works fine for all programs on Windows 7 (64-bit) except recently 64-bit iTunes just stopped working. I believe the sound stopped right after downloading the 10.5.1.42 version of iTunes.

Sir,
I had the same problem with itunes 10.5 with creative labs sound card. The only way I could solve it was to use the built in sound on my video card. But needless to say I have a very high end video card, I have the NVIDIA GTX 580. And after I used the sound on my video card everything worked great.

Mac projector file looking for movie

Hi
I am using Director 11.5 and am having a problem with the Mac projector file.
I am creating the files on a PC. I then copy the file across to the Mac.
When I load the file and click on the first linked file it can't find it and keeps asking for the file.
I have checked and double checked that the file is there in the Publish settings and that I have spelt it correctly.
However everytime I click it asks for the Movie.
Any ideas?
Thanks
Graham

Hi Graham,
1) How sad that no one has answered this post yet... I used to love Director but am now so disillusioned with the lack of documentation and support for it... that being said...
2) I'm certain this answer is too simplistic to be helpful, but without knowing any more about your settings/etc., I can only offer the most obvious response: is there any chance that the path is the problem? Is the movie linked by an absolute path? When it asks for the movie, does it show a path (e.g., one that's on your pc but not your mac) where it's looking. I remember using relative paths with Director 8 and having to change the path to an @ to denote that it needs to be relative. That's my best guess for now.
I hope that it helps just to have received a response, if you're even checking this post anymore... it has been a while since you wrote it.
Best of luck... maybe it's time for all of us to move on to something else...

Mac Projector file that autostarts

How can I place a Mac projector file on a CD or DVD and have
it
autostart when placed in the mac?
Thanks.

It is not possible.

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still c

Trying to load a Dreamweaver CS5 extension called Image Show Pro to mac operating system 10.9.2. Trial version worked fine, but when I try to load full version, Adobe Extension Manager crashes. I have downloaded new Extension Manager for CS5. and still crashes. Anybody else experience this? email:[email protected]

Hi bigd_bud,
Can you see if the solutions in this post help?
Re: Adobe Extension Manager crashes on mac 10.8
Thanks,
Preran

HT4061 Iphone suddenly turned off after it was working fine. How can I turn it on again?

Iphone suddenly turned off after it was working fine. How can I turn it on again?

Hi Bobgriff43,
If your iPhone will not turn on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault

The screen goes black 2 or 3 secs after lifting the lid, but comes back on if I disconnect the magnetic power lead, after that it works fine with or without lead. Anyone had this problem, and is it symptomatic of a serious fault?

It could be a software issue. I would reinstall the OS. You don't have to lose or reinstall any apps from archive and install. This way, your user folder remains intact but you get a fresh copy of the OS.

Epson Printer won't work after months of working correctly. Has anyone else experienced this problem?

I have the epson workforce printer and it was working correctly for months and after i updated my mac mini it couldn't locate printer. I have tried installing many times and it wont recognize printer. i'm trying to connect to my network and it won't connect. ive tried the usb install, wireless install. the printer works fine with everything else except the mac mini.

Might try this for a start...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

When I try to open a pdf file, it will only save. It worked fine before 3.6.6.

I want to open a pdf file in Preview on my Mac. Now it will only save it even though the preferences have been set correctly. It worked fine before 3.6.6 version.
== This happened ==
Every time Firefox opened
== Upgraded to 3.6.6

Gilad, I am new and I don’t know how to reply within the discussion site. The browser I use is Firefox. Thank you for any assistance.
Martin
Go Gators!!!!!!!!
Martin M. Henderson, Jr.
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

BI Publisher 11g Trial dont work fine , send ERROR

Hi.
I Install BI PUblisher 11G Trial in a new clean server with :
+ Windows 2008 R2 Foundation Spanish with SP 1
+ Download, Install BI Publisher 11g Trial
+ Execute Demo Report "Revenue Budget Actual and Detail "
+ In Inteactive mode work fine
+ In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
+ In PDF the pivot table don't display any value higer 1.000.000
This is a bug ?,how correct this errors ?
Thank you very much
Carlos

Hi Carlos,
Are you still experiencing this problem?
I do not see this on my installation on Windows7 64 bit running in English.
I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
Interactive, HTML and PDF render correctly.
When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
How do the other sample reports look for you?
Mike
Edited by: mdonohue on Jun 5, 2012 4:45 PM

Elements 12 organizer will not stay up, it crashes very quickly after boot, editor works fine. After

What do I do for photoshop elements 12 crashing immediately after booting up. Editor works fine.

Please try creating new tag in a new catalog.. Is Organizer still crashing?
You also mentioned crash on restoring an old catalog backup? Is this the same catalog with which you are seeing crash on tag creation?
Thanks
Andaleeb

Can't read Adobe reader files, they are too faint to see; Works fine in IE, so it must be a Firefox problem.

Adober Reader and Firefox 4.0 beta 8 has a bug.
adobe reader brings up the .pdf's very faint, cannot be read. Using beta 4.0 8. Uninstalled and reinstalled Adobe reader 10X. works fine in IE so it must be a firefox problem.

Vaporfire wrote:
I just noticed a problem yesterday after a customer called and said that they weren't able to view the 24 volt computer link on our website. So I went can check with Firefox and it won't display when I never used to have any problems with Firefox. I tried in IE and it worked fine. Any help would be greatly appreciated. The website is www.lamppakuuma.com and the link that won't display is http://lamppakuuma.com/24%20Volt%20Computer.html. It is under our furnace section. Any advice would be greatly appreciated because this is my 1st website design and it used to work correctly.
Thank you,
Just giving a link isn't any good to anyone, no-one can see a link unless they start clicking on everything on the page. Can you tell us what words/image to click on?

After years of working fine and no recent changes, my thunderbird now refuses to retrieve emails from one of my 3 email addresses. What do I do?

Last week it had slowed considerably in retrieving messages for this email address, but now it does not work at all. The three other email addresses are working fine.
The email address that is not working is working fine on my phone and on webmail, but not on thunderbird.

This is a POP email account. I can see everything, all files and buttons. The problem is that when I click on "get mail" either nothing happens or it takes forever to download the mail. Further, when I click on each email it takes a long time to open, it takes a long time to delete, it takes a long time to go to the next email. I have no other problems.
This has always been a POP account, and it has always worked fine, but it's the only account that I have trouble with now. My other two email accounts download quickly through thunderbird. It is not a gmail acct. Sending an email is not a problem. Seeing emails in folders is not a problem. I can go on webmail to retrieve the emails just fine, but that isn't very convenient.

Iphone 3gs screen goes white after unlooking but works fine before

Hi everyone.
This is my first post here.
I got an Iphone 3GS that worked fine yesterday and then suddenly after the unlook the screen the screen goes totlay white.
I have tried the rebot thing and after that the phone works untill it looks the screen and the it back to white again.
I have tried to update the phone software to the latest because the phone looks fine in iTunes. No change
I have done the factory reset no change.
I have even but an old backup to the phone when the phone worked. no change.
What can I do to get my phone working?
thanks in advance

This is a rare but classic iPhone 3GS White Screen Problem. It is due to faulty LCD Display.
Before and during any iPhone 3GS repair make sure the iPhone is OFF. Because the 3GS Logic Board and new LCD is vulnerable to damage when repaired with it being ON.

Mac Projector files aren't publishing after months of working fine

Similar Messages

Maybe you are looking for