.Mac publishing issues...

Okay, so I loved making my site with iWeb, and assumed publishing to my .Mac account would be just as easy, but unfortunately was not.
Yes, I'm using the latest (1.1.1) version...
Here's my error message:
"Publish Error
An error occured while publishing file "/Web/Sites/iWeb/kleen_kompanion/Blog"."
And nothing else...no clue why it's erroring out.
This is ridiculous...any ideas?
I've already tried deleting my preferences file, reinstalling
the latest update, an still no luck.
Thanks for the good IDEA, at least, Apple.

Hmm. No, every other .Mac feature seems to be working properly and as expected - that's why this makes no sense to me.
Yeah, that *****...good luck with yours too!
I think I'm going to try reinstalling iWeb and see if that makes any difference.
I might reset all my sync data as well..not sure what else to try.
One more thing, however, is that I believe iWeb is trying to publish to my iDisk in the wrong folder to begin with. The help files tell me that if you only have one site, it will publish to: http://web.mac.com/ppmdrumma.
Well, even though it's not actually publishing, I still have the "visit" button,
which takes me to: http://web.mac.com/ppmdrumma/iWeb/Site.
Makes no sense to me...I don't have multiple sites!!!

Similar Messages

  • Flash CS6 Mac Publishing issue

    Hello
    I am publish a Mac .app using Flash CS6 but I can not protect it with SoftwarePassport.
    SoftwarePassport freezes during the protection process.
    I already,  reset the preference and I had try to publish old and new files.
    All with the same results.
    Also i try to publish the files in Flash CS5
    Any idea?

    Hi,
    Could you please provide the exact steps to reproduce the issue?
    Thanks and Regards,
    Meenakshi Tiwari
    FlashPro Engg Team

  • Publish Error: .Mac Publish Configuration Values

    Ever since the update to OS X 10.4.7, I have been unable to successfully publish any changes to an existing iWeb site. Whenever I try to publish I get a dialog box with the following:
    Publish Error
    There was an error determining the .Mac publish configuration values. Please try again in a few minutes.
    No matter how many times I attempt to re-try the Publish, I get the same message. I have checked the configuration of my .Mac preferences and everything looks fine (I am able to sync with .Mac without any problems).
    Does anyone have any ideas?
    Thanks,
    - John
    20" iMac G5, 2GHz, 2GB RAM   Mac OS X (10.4.4)   iWeb 1.1.1

    OK... here's an update. After successfully getting iWeb to publish using another WiFi network (as opposed to my home satellite internet connection), I decided to see if I could force iWeb to get its act together and complete a publish at home.
    I WAS SUCCESSFULL! At least partly....
    Here's what I did. Follow these steps at your own risk:
    (1) With iWeb closed-down, I went to the location of the Domain file that stores all of the iWeb files and data (found in your Home folder under Library/Application Support/iWeb)
    (2) Copied the file as a safety backup
    (3) Right-clicked (or <CTRL>-clicked for single-button mouse users) and selected the "Show Package Contents" option
    (4) In the resulting window, I highlighted and deleted the following items:
    - The "cached_resources" folder
    - assets.xxx.plist (where xxx is your .Mac username)
    - deletedComments.xxx.plist (same explanation for xxx as above)
    - ServerCachedResources.plist
    - sharedassets.plist
    (5) I then re-launched iWeb and triggered a "Publish All to .Mac" AND IT WORKED!!! Without a hitch!
    Once the publish completed, I tried making a small text edit to a single page and then re-publishing.... but then I got the "Can't publish xxx file, try again" error. It appears that, over a satellite internet connection at least, iWeb is unable to overwrite a file that already exists on .Mac successfully without performing all of the above steps.
    So... I went back in and repeated the same steps as above. Unfortunately, that resets iWeb into thinking that everything has been successfully published, so in order to get my small text change up, I had to "Publish All to .Mac" again... a bit tedious to have to upload the WHOLE site just to get one small change posted... but better than having to FTP files separately!
    So... Apple... if you're listening, it seems that there is definitely an issue with iWeb publishing to .Mac over a high-latency network connection. PLEASE DO SOMETHING!!! I am reading that iWeb 2.0 is already in the works... with lots of enhancements, etc. I sure hope that PUBLISHING is one of them!
    Hope this information helps someone else out there. Just be careful... I'm not happy having to mess around in the innerworkings of iWeb's files... and I'm not sure what the long range ramifications could be. Proceed at your own risk!
    - John
    20" iMac G5, 2GHz, 2GB RAM   Mac OS X (10.4.7)  

  • How big is my site? Could size cause publishing issues?

    How can I find out if my site will fit in the available space on my mobileme prior to publishing? I had a site published, using a personal domain, prior to the conversion from .mac to mobileme. I recently made changes/additions to the site, and now it won't publish. I've double checked my forwarding and CNAME information and all seems to be correct. The site publishes to a folder without any problems, but not to mobileme, even when I use Publish All. Could the publishing issues be related to the size of the site?

    I've been using Host Excellence for a number of years. Their reliability is good as is their tech support.
    I particularly like the way I can name my own root folders and the ease and speed of registering a domain name and setting up a new site.
    I wouldn't want to think about how big my latest site is getting.
    http://www.iwebformusicians.com/ is built on ten different domain files for ease of updating and way quicker uploading. This is another approach you could consider.

  • Mac Enrollment Issue on SCCM 2012 SP1

    Hi Guys,
    I am working on Mac enrollment(10.7) and facing issue during enrollment. Below is the error message when we try to run the enrollment command on Mac :
    “Server connection failed. HTTP Response code is 500 and reason is Internal Server Error"
    Below are Log info:
    Enrollsrv.log : No error message is highlighted.
    Enrollweb.log:
    No error message is highlighted.
    Enrollservice.log:
    [7, PID:7304][10/28/2013 16:40:03] :ConfigManager: ChainStatus error: RevocationStatusUnknown,The revocation function was unable to check revocation for the certificate.
    ;OfflineRevocation,The revocation function was unable to check revocation because the revocation server was offline.
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.SplitCACertChain(String base64cert)
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.setCAChain(EnrollmentServiceProfile profile, WindowsIdentity requester)
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.RefreshCache(Int32 enrollmentProfileId, EnrollmentRecordType type, String template, WindowsIdentity requester)
       at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.ProcessRequestSecurityToken(RequestSecurityTokenType request, WindowsIdentity caller, ActionEnum action)
       at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.EnrollDevice(Message messageRequest)
       at Microsoft.ConfigurationManagement.Enrollment.DeviceEnrollmentService.RequestSecurityToken(Message messageRequest)
    [7, PID:7304][10/28/2013 16:40:03] :FaultCode is: EnrollmentServer and reason is: EnrollmentServerException InitializeFailed
    [13, PID:7304][10/28/2013 17:11:01] :EnrollmentService application stop ...
    [3, PID:956][10/28/2013 17:45:37] :EnrollmentService application start ...
    [3, PID:956][10/28/2013 18:06:38] :EnrollmentService application stop ...
    [3, PID:4700][10/28/2013 18:45:39] :EnrollmentService application start ...
    [7, PID:4700][10/28/2013 19:06:40] :EnrollmentService application stop ...
    [3, PID:5872][10/28/2013 19:45:42] :EnrollmentService application start ...
    [13, PID:5872][10/28/2013 20:06:42] :EnrollmentService application stop ...
    Can someone shed info on resolution of the above issue?
    Also, is there any means by which we can troubleshoot the Mac enrollment issue step by step? Also what entries needs to be checked in all logs for successful enrollment?

    the following links may give you some hints:
    http://social.technet.microsoft.com/Forums/en-US/48bc7fcc-3d84-4042-abac-67f30d701121/mac-enrollment-issue?forum=configmanagerdeployment
    http://www.windows-noob.com/forums/index.php?/topic/7391-mac-enrollment-issue/

  • Mac System Issue pop up window has disabled Safari.  Please help?

    I clicked on a video on FaceBook & ended up with a pop up that says I have a serious Mac system issue & I need to call this phone number immediately. 
    I can't do anything at all with Safari now.  Has anyone had this issue?  Know how to get rid of it?  I

    Force quit Safari and relaunch it with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet and try again.
    (115087)

  • Folio Producer fails to update older published issues

    A client wants me to update an advertisement in several past issues including issues published in January and February 2012.
    I updated the article in the folio and go to the Folio Producer to update the published issue, but either immediately get a failed attempt or it will process up to 20% before failing. I have tried publishing multiple times and it constantly fails.
    Has anyone else come across this problem?
    Why can't I update?

    What do you see when you click the 'Failed' link. There should be an error message there.
    // James Roche
    // [email protected]<mailto:[email protected]>
    // I was born lucky

  • MAC Flapping Issue

    Dear Folks,
    I am working with a IT organization as network administrator, at client site we are getting the MAC FLAPPING issue since 1 month, due to that some time it completely down my whole network. Scenario is like that, we are using Ruckus AP and Zone director as a WLAN controller which is directly conecteted with our core switch. Rest of indoor AP's are connected with Distribute and access switch. Now since 1 month we are getting in core switch below mention notification -
    #sh log
    Log Buffer (8192 bytes):
    889842: Nov 18 13:46:37.182 IST: %SYS-5-CONFIG_I: Configured from console by iympladmin on console
    889843: 001585: Nov 18 13:47:09.724 IST: %SW_MATM-4-MACFLAP_NOTIF: Host c4d9.879b.cf99 in vlan 13 is flapping between port Gi1/1/4 and port Gi1/1/3 (nhcin-sjp01-2)
    889844: Nov 18 13:49:17.806 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to up
    889845: Nov 18 13:49:19.818 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
    889846: 001586: Nov 18 14:04:57.394 IST: %SW_MATM-4-MACFLAP_NOTIF: Host c4d9.87aa.d584 in vlan 13 is flapping between port Gi2/0/41 and port Gi2/0/35 (nhcin-sjp01-2)
    889847: 001587: Nov 18 14:13:39.784 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 0008.2292.1440 in vlan 12 is flapping between port Gi2/1/2 and port Gi1/1/4 (nhcin-sjp01-2)
    889848: 001588: Nov 18 14:15:35.735 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 1c3e.843e.c441 in vlan 13 is flapping between port Gi2/0/41 and port Gi2/0/35 (nhcin-sjp01-2)
    889849: Nov 18 14:23:23.346 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 14f6.5afa.ecb9 in vlan 12 is flapping between port Gi2/0/37 and port Gi2/0/35
    889850: 001589: Nov 18 14:23:23.415 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 14f6.5afa.ecb9 in vlan 12 is flapping between port Gi2/0/37 and port Gi2/0/35 (nhcin-sjp01-2)
    889851: Nov 18 14:32:33.860 IST: %SW_MATM-4-MACFLAP_NOTIF: Host c0cb.3886.30cb in vlan 13 is flapping between port Gi2/0/41 and port Gi2/0/35
    889852: 001590: Nov 18 14:32:33.954 IST: %SW_MATM-4-MACFLAP_NOTIF: Host c0cb.3886.30cb in vlan 13 is flapping between port Gi2/0/41 and port Gi2/0/35 (nhcin-sjp01-2)
    889853: 001591: Nov 18 14:33:05.755 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 843a.4b15.187a in vlan 12 is flapping between port Gi2/0/41 and port Gi2/0/35 (nhcin-sjp01-2)
    889854: 001592: Nov 18 14:33:07.017 IST: %SW_MATM-4-MACFLAP_NOTIF: Host 6c88.14a0.93d8 in vlan 12 is flapping between port Gi2/0/41 and port Gi2/0/35 (nhcin-sjp01-2)
    nhcin-sjp01#
    As mentioned in msg 12 & 13 VLAN is our WLAN.
    After getting this msg automatically all network goes down, I need to shut down the associated port winch is directly or indirectly connected with AP, and after some time it will work properly.
    Now I need some mechanism which can be block the duplicate source mac address to preventing from this kind of scenario.
    Regards,
    Shekhar 

    Hi Devils,
    Answer is in below -
    1. Are those MAC addresses actual Wireless Hosts? i.e have you traced them?
    = Yes, those are actual wireless MAC add, I have check in zone director controller.
    2. Are the SSID's set to tunnel?
    =No
    3. Do you have one ZoneDirector or two?
    =Two, both of them are connected with core switch.
    I have been confirmed about that  if wireless users are roaming between two AP or more it will appear the same error msg, now what would be the solution. ????
    What extly the solution is?>
    Where should i implement the solution on switch or zone director?
    Please suggest!!!!!

  • Publish Issue: mp4 missing 1st PPT slide (Cap 6.0.0.199 on Win7)

    Publish Issue: mp4 missing 1st PPT slide (Cap 6.0.0.199 on Win7)
    First slide, my title slide with audio, is not the the published mp4.
    I can insert a phantom slide into the project, before my title slide, as a work-around, but I shouldn't have to do that.
    Is there something I clicked on or need to click on?
    Thanks!

    First of all, please apply the patch to your version. Captivate 6.0.0.199 had a truckload of issues. Here is the link for the patch.
    http://helpx.adobe.com/captivate/kb/captivate-6-patch.html
    How are you inserting the audio? Is it coming from the PPT or did you insert it in Captivate? Is it a slide audio or is it associated with an object?
    Sreekanth

  • MAC address issue----Spearman

    Saw your comments on this in the post about the 1.9 bios for neo2platty ....
    I can confirm that My MAC address issue was caused by the bios that you sited in your comments....all F's were written to My nvidia lan too...
    only solution from what I have read is too rma it...'bummer'
    just thought You would like to know....  Your not alone

    I had the same problem yesterday and after many hours searching the web I ended up with this post that made me really desperate... But I didn't give up and while trying a new bios flash because of random crashes when in the bios, I noticed the obvious: you can change the MAC address when flashing 
    use the last version of the dos flasher with the parameters /nvmac:xxxxxxxxxxxx/wb after the name of the bios file; it's explained if you ask the help with the /help parameter. You can find the mac address on a stick on the parallel port.

  • Thanks bazzardl. I was able to get the MAC Mail issue resolved. Best, glofromkc

    Thanks bazzardl. I was able to get the MAC Mail issue resolved. Best, glofromkc

    I am having the same problem but cannot get anything but the actual phone to work.  I have a unlocked 3GS running 6.0 (what was I thinking?).  No data whatsoever, no texting, no visual voicemail.  I simply cannot access the APN settings.  I have tried sim swap, I have tried APN changers.  I have been on the phone with ST tech support for hours and hours.  I have tried to get the answers from a "genius".  I am stuck and looking at Android devices, but would really like to keep using the iphone with Straight Talk.

  • After publish Android Application in Google Play Can't find any publish issue in app.

    After publish Android Application in Google Play Can't find any publish issue in app. The Product ID is match, The Email Address in Folio Builder is match but is there necessary that DPS account have to match with Google Play Developer Account? Please Help

    Are the folios published as Public? Are the folios free or retail? If retail, did you create an in-app billing Product ID in Google Play that is an exact match for the published folio? Is the "Title ID" you specified the same account you used to create the folios? Did you turn on Strict Renditions when you built the app?

  • Publish error - error determining the .Mac publish configuration values

    I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
    Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
    Thanks mucho!
    MacBook 2GHz, 2GB   Mac OS X (10.4.8)   shipboard satellite internet connection

    Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
    I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
    You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

  • Penryn Macs having issues?

    Okay,
    I have finally decided to move to Mac OS and buy a MacBook Pro.
    * iWork '08 preinstalled
    * Accessory Kit
    * MacBook Pro 15-inch Widescreen Display
    * 2.4GHz Intel Core 2 Duo
    * 200GB Serial ATA Drive @ 7200 rpm
    * Backlit Keyboard/Mac OS - U.S. English
    * SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
    * 2GB 667MHz DDR2 SDRAM - 2x1GB
    * Apple Remote
    * NVIDIA GeForce 8600M GT with 256MB
    I am extremely exited. But before i order, i was wondering if I should expect allot of problems? About 2 years ago, my friend bought a macbook and had to have it replaced 5 times. How have the Penryn macs been?
    This will l be my first Mac ever so I am hoping to have a good transition to the mac world:)
    Thanks,
    Mac Zac.

    Hi Zac.
    Let me be the first to say, welcome to the light side!
    Regarding the Penryn Macs: No, there are not so many issues that you should hold off buying one. If you browse the forums here you'll find lots of people running into problems. But remember that all the millions of people that DON'T have problems don't come here to tell you everything's working fine. For the vast majority of people, Macs work seamlessly, day in and day out.
    Of course, like all technology products, sometimes Macs have issues. They are made out of the same silicon and chips as other computers and, like those other computers, components can fail or go bad. That's just life. The good news is: it's rare.
    Likewise, Leopard is running extremely well for the vast majority of people. To be sure, there are a few small issues affecting small groups of people. Some folks are having wireless troubles, others are seeing some typing issues after a keyboard firmware update, for some folks iTunes is locking up while browsing cover flow. But, again, these issues don't appear to be too widespread and I would certainly not hold off buying a Mac because of them. You can bet that Apple engineers are all over the issues and they'll be resolved soon.
    To sum up: the state of the Mac world is fantastic. Like everything else in life, it's not perfect. But it's as close as you'll get with a computer! My advice is to pull the trigger and enjoy the switch! And I'll put my money where my mouth is as well: my $3,000 Penryn MacBook Pro arrives tomorrow morning.

  • Publishing Issue - Non .Mac

    HI Folks,
    I Publish my iWeb file to a folder on my desktop. Test the index file in Safari and Firefox. Everything works. I publish it via Cyberduck FTP and all my images are question marks, the rest of the page is blank. Any advice?
    G5-Dual 2's   Mac OS X (10.4.7)  

    Like I said the file works perfect when launched from
    the original folder I publish to. The issue only
    occurs when I go through the FTP to the "www" folder.
    It's starting to sound like a hosting issue...
    Have you verified that you have the exact same structure in the www folder on your server that you have on your local drive, namely an index.html file, a folder with the same name as your site, and inside that folder various pagename.html files and pagename_files folders? It is not that uncommon for people to accidentally change the structure when using ftp, which means it will not display right from the server even though it is fine when viewed locally.
    Also, did you upload everything to the server rather than just items you had changed? That could also be important.
    Again, the url would be helpful to verify that others see the same thing you do, etc. Also the name of your site inside iWeb would be helpful.

Maybe you are looking for