Mac Remote Desktop Printing not working

I have the following:
TS 2k3
Mac 10.5.6 with a AIO 6410 connected via USB
RDP 2.0 client for the Mac
I have installed the printer drivers on the server
The RDP client has the printer associated with it.
Printing fails. I'm thinking it has to do with the ports associated with the printer driver on the server
HELP

Printing on MAC osx never worked for me until i found this tool.
http://terminalworks.com/remote-desktop-printing/

Similar Messages

  • CUPS PDF PRINTING IN WINDOWS OVER REMOTE DESKTOP - PRINTER NOT LISTED

    I am running OS X 10.6.2. I connect remotely using windows remote desktop / terminal services to various windows machines. For the XP and Windows 2003 Server 32 bit systems I have no problems with printing pdf documents from the remote windows system back to my mac using CUPS PDF. I don't have to install anything on the remote windows computer. However, for Windows 2003 Server 64 bit and Windows 7 Professional 64 bit, the CUPS PDF printer does not appear in the printer list. I tried installing the Laserwriter 8500 print driver (which apparently CUPS uses) and attaching to a unused TS printing port. The printer appears in the list but it won't print, and it's obviously not attaching to my computer.
    I can't upgrade my mac operating system until I resolve a keyboard driver issue with 10.6.3 and above. Any suggestions?

    I am having a similar issue. I'm using Remote Desktop to connect to a 2008 R2 server and am trying to use PDFWriter as a redirected printer to create a PDF. It is only working after I check print to file, save the file (which it creates an XPS file that is not compatible), then I uncheck print to file, click print, and then it creates the pdf file I need.
    Any help would be greatly appreciated.
    Basically - I need to have a "PDF" printer because the print window is on the remote server and it doesn't have the save as pdf option.
    Thanks.
    Phillip

  • MS Remote Desktop Printing stopped working correctly. Please Help!!

    I have been using MS Remote Desktop for mac for a couple months now. I had no problem printing from windows to a printer shared on a local windows network. For some reason it does not print correctly now. The print is aligned wrong and it doesn't fit on the screen. It is almost like its using the wrong driver. I know that the Apple Laserwriter driver sends the print to my mac which redirects it into the proper format. It worked great for a couple months, like I said. I don't know if the problem happened when I changed to the RDC 2.0b2. I tried going back to the original beta and it didn't work either. I don't know what went wrong. Please help me, I rely on this heavily. Thank You.

    RDC still works for me, I'm glad to have windows to log into to avoid all the Mac Bugs !
    It would probably help if you said what your problemactaully  BTW ?

  • Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

    i have still facing same problem in last two week in my  system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not  in my system use the command netstat -a -o command in
    command prompt but this is  my bad luck  its not woking in my machine after i have decide to change RDC listening port via registry  i have change it 3389 to 3391 after restart my system,  and
    after again testing using same command but no any change again rdc not listening . After i have  search this issue on search engine google bing and microsoft , i have found more solutions  but i have try one
    uninstalled two microsoft updates first is kb  KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
    any version computer running , i have try  three and four time enable  disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
    stinger tools to scan my machine to remove virus but stinger is not found any thread in system.  ihave already run this command in my system sfc /scannow  Please Can you help me to fix  this issue.

    Hi,
    When you try to start the Remote Destop Connection, what errors it showed out?
    Could the other PCs connect this PC with the RDC?
    So you have read this blog?
    RDP connections might fail due to a problem with KB2621440 - MS12-020
    Did you reinstalled the KB2621440?
    Besides, did you follow this guide to enable the RDC connection?
    Connect to another computer using Remote Desktop Connection
    And also this guide?
    Why can’t I connect using Remote Desktop Connection?
    Please take a check with those settings again.
    Best regards
    Michael Shao
    TechNet Community Support

  • Remote Desktop Connection not working

    I am able to remote desktop connect to my home computer from work; however, I can't remote desktop connect to my work comptuer and server. I believed it has something to do with my Linksys E3000 access point settings but I'm not sure where to look for and verify. I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network. I also VPNP in to my work place so that it has the same IP address as at work and still, remote desktop connection from home to work is not working. Any suggestion is much appreciated.

    thebluemamba_24 wrote:
    Connecting from home to your remote desktop server has nothing to do with your router. Certain ports are needed to be opened from the server’s end in order to host an application. Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work. In case it will not work, then contact your IT guy.
    If you read my previous post it said:
    "I took my home laptop to work and able to do remote desktop connect to the server. I also took a laptop that's working fine with remote desktop connect to the server home and tried to remote desktop connect to the server at work and it's not working. Therefore, I've concluded that it has something to do with the access point and not the settings in the computer because it works fine when I took it out of my home network."
    I think my above statement answers your question of "Try to connect your computer to your modem or to another wireless network just to check if your work’s remote desktop will work." However, your statement prompts me think of something else. What I have tried is bring my laptop to work and tried connect via RDC to the server and it works but it just not working when trying at home. What I have not done is instead of brining my laptop to work and try RDC there, perhaps I should I try it on a friend's or relative's network and see if I can do RDC to my server at work. If this does not work as well, then, could it be that at work there is something something outside RDC coming? But even if this is so, why can't VPN work?

  • Remote Desktop Ports Not Working

    Hello, I am trying to set up my new laptop with Remote Desktop. I have Norton 360 on it and a linksys EA6900 router.
     And this is all on my home network.
    My issue is that I cant seem to connect to the laptop to the port 3391 I opened up on it. I have two other PCs that are wired
    at 3389 and 3390 and are totally fine. 
    I changed the RDP port number in regedit to 3391. Forwarded the port to the laptops reserved IP (1.23.25.250) and I even allowed
    the port in the firewall for norton and in windows firewall for fun.
    Even doing all that I still cannot connect even though I did the same for my two other PCs and theyre fine. 
    I can for some reason ping everything out of my laptop but not to it. 
    Whrn I use a port checker tool it does say 3391 is not open but 3389 and 3390 are which is weird to me.
    Hope someone can help out, thank you.

    Hi cmcigas,
    “I can for some reason ping everything out of my laptop but not to it”
    To verify whether it is related to the firewall ,we can temporarily turn off the firewall to have a check .
    Here is a link for reference of this issue
    Nobody Can Ping My Computer
    https://technet.microsoft.com/en-us/library/cc749323(v=ws.10).aspx
    We may also need to run the built-in troubleshooter tool to have a diagnostic of the network .
    Control Panel\All Control Panel Items\Troubleshooting\Network and Internet\Network Adapter and Incoming Connections
    " I even allowed the port in the firewall for norton and in windows firewall for fun."
    How did you set the firewall ?
    To set the firewall  ,here is a link for reference
    Open a port in Windows Firewall (It is an example in Windows 7,the Windows 8.1 can share the same step)
    http://windows.microsoft.com/en-hk/windows/open-port-windows-firewall#1TC=windows-7
    Best regards

  • Remote Desktop does not work in webvpn ,java error in Mac

    We are using webvpn but when using the RDP protocol MAC computers Java error appears, while in the Window machine runs smoothly.
     I Attached document where the error is displayed , version of java and java traces when I do the connection .
    Thanks for the help

    Hi, how can help me?

  • REMOTE DESKTOP (MICROSOFT) NOT WORKING SINCE YOSEMITE UPDATE.  ANY ONE KNOW A FIX FOR THIS ?

    MICROSOFT RDP HAS WORKED FINE WITH YOSEMITE. 
    AIRPORT UTILITY IS UP TO DATE.
    SINCE YOSEMITE UPGRADE THERE IS NO ABILITY TO CONNECT FROM HOME TO OFFICE.
    IOS DEVICES CAN CONNECT BUT THEY ARE CELLULAR ANYWAY SO IT SEEMS TO BE CONNECTED TO THE WIFI NETWORK.
    I AM RUNNING MY CONNECTION TO THE INTERNET ON A RECENTLY PURCHASED NETGEAR ROUTER.
    THERE IS ALSO A TIME CAPSULE IN MY SETUP.
    ANY SUGGESTIONS ?

    Thats a good point. Let's troubleshoot network connectivity.
    Open RDP, right click your connection and select edit, then copy the PC name.
    open terminal Finder > Utilities > Terminal and type the following
    telent YourPCName 3389
    where "YourPCName" is the name you copied above. Hit enter
    You won't get a "success" message or anything, if the terminal window just goes blank, then there is not a firewall/network issue.
    If you clearly get an error, then it's either Firewall or DNS. Try the following in terminal
    ping YourPCName
    if it starts showing an IP address, line by line by line, then it is definatelly a firewall issue
    if not, trying getting the IP address from the winders box by opening a command prompt and type
    ipconfig
    do all the above again but use the IP address in place of YourPCName

  • OS X Remote Desktop is not working with Azure Cloud Machines or Azure Pack Machines

    Hi,
    i can't connect to any Machine via Console. I'm Working with Machines in Azure Pack and in Cloud. The connection causes a Authentication Loop.
    Best Regards

    Hi,
    In addition, here are some related Azure forums below for you:
    Azure Virtual Machines Forum
    https://social.msdn.microsoft.com/Forums/en-US/home?forum=WAVirtualMachinesforWindows&filter=alllanguages
    Azure Management Portal Forum
    https://social.technet.microsoft.com/forums/azure/en-US/home?forum=windowsazuremanagement&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Local Printer not working via Remote Link

    I have a problem with my remote desktop printing to my local printer.  I connect via RD on Windows 7 Home to Windows 7 Pro.  I have installed an HP Laserjet Pro CM1415fn printer.  All prints fine locally.  Also everything printed fine
    but have had to have a recent update to my Remote PC that I log into.  So the printer had to be reinstalled.
    All worked ok for about 6 print jobs then stopped working.  Nothing has changed.  I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode.  I have tried restarting the Printer Spooler in Services
    and rebooting the remote PC but no joy.
    Any ideas please.

    Hi,
    You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
    Take a try with the printer troubleshooter:
    Open the Printer troubleshooter
    Also see if the below thread could help:
    Local Printing with
    Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
    Best regards
    Michael Shao
    TechNet Community Support

  • Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

    Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

    I received no error message. The application was just trying to find applications unsuccessfully.
    I am using MAC OS 10.10.1
    I tried to uninstall the application  but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
    Otherwise I would have to reinstall everything and this would be a pain.
    Thanks for your help.

  • I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working.

    I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?

    You need to install Office on the computer from the installer DVD or disc image you purchased.

  • Remote Desktop Printer Redirection Stops Working Randomly on Server 2008 R2

    We have a MS Windows Server 2008 R2 that is used SOLELY as a Terminal Services remote desktop server onto our network. It is used for employees who are off site and need to use the networked company software. VPN works, but is extremely slow for this software.
    Over the past week, the redirected printers function has repeatedly stopped on this server. The employees need this to print to their own local printers. It will eventually restart itself, but after several hours. To get it started faster, I have to restart
    the server.
    I've done this maybe 6 time since last Monday. This has never been an issue before, and I cannot think of any change that may have occurred that could cause this.
    The Event Viewer says this:
    The Remote Desktop license server cannot update the license attributes for user "DrewR" in the Active Directory Domain "XXXX.main". Ensure that the computer account for the license server is a member of Terminal Server License Servers group
    in Active Directory domain "XXXX.main".
    If the license server is installed on a domain controller, the Network Service account also needs to be a member of the Terminal Server License Servers group.
    If the license server is installed on a domain controller, after you have added the appropriate accounts to the Terminal Server License Servers group, you must restart the Remote Desktop Licensing service to track or report the usage of RDS Per User CALs.
    Win32 error code: 0x80070005
    (I inserted the Xs)
    I've never looked at the Event Viewer on this server, but it is littered with messages such as this, and has been for months and months, so if this IS the issue, then it sure took its sweet time affecting anything.

    Hi,
    Initially try to update with the latest rollup for fixing remote desktop printing issue. You can check below link and verify result.
    https://support.microsoft.com/en-us/kb/2647753
    And for the error you can check the related information from beneath article.
    TerminalServices-Licensing 4105 – The Terminal Services license server cannot update the license attributes for user “<UserName>” in Active Directory Domain “<DomainName>”
    https://support.microsoft.com/en-us/kb/2030310
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT203254 my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

    my desktop is not working when i open it all it does is show the color weal and it never gos away on my mac book pro how do i fix it?

    It means, tentatively, that system files are missing or damaged and you will have to reinstall Snow Leopard. See the following:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Weblaunch cisco secure Desktop mac os x is not working

    Hi there,
    The weblaunch for Cisco Secure Desktop is not working with MAC OS X 10.7.5 on Safari and Firefox (latest one).
    On Windows ist it working properly.
    Java is enabled on the browser. With the local installed hostscan it works, but how can the weblauch be enabled for MAC OS X?
    Here the error:
    Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.Cisco Secure Desktop must run and validate your system to proceed. Please verify your browser settings and configuration and retry.
    Thank you,
    Norbert

    We are matching the group policy, I can connect from the Mac using the AnyConnect client so the DAP is working correctly now. I have the DAP connection meathod as both default webvpn or clientless.
    Only things I'm checking for in DAP is group policy, then OS X and Antivirus for MAC. That's it, yet WebVPN does not launch, i'm stuck at the Access Denied, system failed to be validated by Cisco Secure Desktop. I enabled the Java Plugin when prompted...same issue.
    This doesn't work in Safari or FireFox.
    Access Denied
    Your system failed to be validated by the Cisco Secure Desktop and will not be granted access.
    Critical failure.Cisco  Secure Desktop must run and validate your system to proceed. Please  verify your browser settings and configuration and retry.

Maybe you are looking for