Mac Speaker Problems???

My Macbook Pro Built-in speaker at least one of then doesn't work

Hello MacMarshall,
If you are only getting sound through one speaker on your MacBook Pro, check in System Preferences > Sound and make sure that the slider for balance is centered and not all the way to one side. Take a look at the article below for some other suggestions.
OS X Yosemite: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH18958
Take it easy,
-Norm G.

Similar Messages

Applet in Apple Mac OSX problem

Hi all,
have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
ArrayIndexOutOfBound, 0...
but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
_______________________________FireFox_____Safari_____IE
_______________________________Win | Mac_____Mac____Win
1. load applet for 1st time___________OK_|_NO_____FAIL____OK
2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
3. when applet button click (security)___OK_|_NO_____-_______OK
p/s: all above test was using same applet with same parameter and value.
below is the sample i capture from Apple Mac just now:
http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
Message was edited by:
ahbeng78

i has a loading problem saying that
init failed to load ArrayList as error message
said:
ArrayIndexOutOfBound, 0...Well, post the stack trace.
but when i debug print out the ArrayList content and
its length, i'm sure that this ArrayList is NOT NULL
and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
try it in Mac, it show only a part of applet without
any error, but when i try to refresh the page, applet
is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
lastly, when a button of an applet being click and
this will bring a new window with some parameters
value, its work on IE in Windows platform, why it
won't work for FireFox or Safari for Mac? i see
prompt out saying is security problem, is there any
workout of this? thanks. to summary out of junk
above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
--JaySwanny

User Password Reset

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

Rear speaker problem

Hi, i have 4 speakers and a subwoofer. Mainboard is asrock xtreme4 which come with realtek hd audio.
You may know the famous "rear speaker problem" on windows products. While speaker test just works fine, rear speaker never works on media player, winamp etc...
But recently it become really interesting because, that rear speakers works fine on firefox browser 22.0. So it gave me hope the solve this problem once and for all.
Right now, when i listening any thing on firefox, rear speakers works fine. But not working on Chrome and other stuff.
What firefox 22.0 made to work speakers fine?

hey have you tryed connecting other speakers to the bad connected one and see if it was not a bad channel? if so then let me know and I will look in to this problem more and try my best to get you the answers your looking for ok

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Solved my scratchy speaker problem. Do a hard reset. Home,sleep button. Hold till screen goes blank.

Had a scratchy speaker problem and strange sounds when ipad shutdown. Hold the home button and sleep button till screen goes blank. Turn on after a minute or two. Fixed it on ipad 4. Good luck.

Apple replaced with new phone under warranty, had to haggle a little to get that done. Set up new one as a new phone, not from a backup, so as to not transfer any possible software issues to the new one, still re-setting up everything... all was good for the first week or so, now this one does the same thing, plus a new issue. While on calls the screen will go black, and the absolute only way to get control of the phone again is to hold both buttons down until the apple logo appears and phone restarts. Additionally, sometimes it will now become unanswerable when receiving a phone call, has only happened on vibrate, but it will go into a continuous vibrating mode and no way to answer the call or stop it, other than the two button restart. Does it on normal calling, and on 4g lte calling setting (verizon).

Nokia N93 Speaker Problem Please help!

Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.

29-Mar-2008 09:06 PM
bigboy_245 wrote:
Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.
Which firmware version you have. To check type*#0000#
If my post has helped you please click the white star on the right

Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

RE: Speaker problems

I have an iPhone 4S. I have been having speaker problems for a while now and am slowly realizing when using and doing certain things that my sound is not working. When I take a video my sound does not work, when I facetime with someone they can't hear me but I can hear them. When I try and put someone on speaker phone they can't hear me. I can listen to music and listen to videos from facebook, youtube, etc. So my question is what could be causing this because I have sound otherwise, I can hear text message sounds, facebook notifications, etc. Help is appreicated. Thanks.

Hi serena36,
This sounds more like a microphone issue that a problem with your speaker. I would suggest using the steps in this article to troubleshoot -
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for using Apple Support Communities.
Best,
Brett L

.Mac sync problem

I can't sync my computer with my .Mac account. When I go to "System Preferences"->".Mac"->"Sync", the computer just sits there and I won't be able to go into the "Sync" option. I can't access the "Advanced" option in this window neither, however the "iDisk" and "Account" options are accessible.
I don't know if this related with my iSync problem reported also in this forum.
Thanks in advance.

Replying to myself as the one long discussion about recent .Mac sync problems has been locked!!
Just to say that NOW .Mac on the web says:
".Mac sync services are currently intermittently unavailable to some users. Changes made to synced information will be reflected when the problem is resolved. All other .Mac services are unaffected.
Last Updated: 6/1/06"
So the MANY people who have been posting problems in the last 24+ h MAY find it resolves and is not their end. But, customer care suggestion to apple:
- IF you think .Mac syncing has a problem POST the info IMMEDIATELY
- Possibly even email .Mac members as many use sync all the time without logging on the .Mac web services
The time and stress (cand cost) spent by many trying to fix their own syncing is frustrating. I have spent several hrs over the last 24h unregistering, registering, syncing manually, resetting from different Macs, doing it item by item...finding a glimmer of hope when on one occasion Mail synced and on another so did contacts, only for .Mac login failures to continue...This has clearly been replicated by a large number of other frustrated customers from the other postings on this over the last day.
macbook 2GHz, 1GB AM, 100GB Mac OS X (10.4.6)

Dreamweaver 2014.1 Build 6947 (Mac) - save problem

I updated to latest version yesterday and now have a problem when I save files which shouldn't happen on a 2012iMac saving to a thunderbolt drive - and didn't happen before updating.
When I save a file i get to watch the (very pretty but boring) spinning top for a longtime. If the 'Force Quit' window is open it shows Dreamweaver 'not responding'. Mostly but not always Dreamweaver decides to respond again.
Same site, same settings, same HDD as before the update.
IMac: 3.4GHz i7 32GB RAM
OS X: 10.9.5
What have you broke?

Hi Nancy,
It seems it's a bug, so I will go back to the previous vetsion. Thanks for
the link!
Best
Pedro
Em segunda-feira, 22 de dezembro de 2014, Nancy O. <[email protected]>
escreveu:
Dreamweaver 2014.1 Build 6947 (Mac) - save problem created by Nancy
O. <https://forums.adobe.com/people/Nancy+O.> in *Dreamweaver support
forum* - View the full discussion
<https://forums.adobe.com/message/7037522#7037522>

How to make mac speak when logging on or waking up

hi, i was wondring how you make your mac speak to you and say welcome or hello everytime you log on or wake it up.
if anybody knows, plesae help.
Thanks!

A login greeting is simple. Make a small application with Automator:
1. Choose Application from the Automator template.
2. Add one action: Run Shell Script. In this action, replace cat with say welcome.
Save the application and store it somewhere. (The Applications folder is a good choice.)
Open System Preferences, choose Accounts, then select the account you want to target. In that account, select Login Items. Drag your new application to the login item window to create a link to the file. Close System Preferences.
Each time that you login to that account, the application will run and the Mac will say "Welcome." Once it becomes annoying, return to the Login Items to remove the link to your application.
A spoken wake-up message is trickier, but it can be done. See these discussions: https://discussions.apple.com/message/3240458 and http://hints.macworld.com/article.php?story=20060908113605812, then get a copy of SleepWatcher, http://www.bernhard-baehr.de/.

My iphone has auto speaker problem ,it pronounces everythin i touch n also auto speak

my iphone 4 has auto speaker problem it pronounces everythin what i touch in the desktop.and also auto speaks like when i switch on it tells time........ after some sec if i left it it says sleep alot....

It sounds like you need to turn VoiceOver off, see this Apple doc -> iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Mac Speaker Problems???

Similar Messages

Maybe you are looking for