Mac stuck on Apple screen with spinning cog

My daughter wanted to wipe our iMac and as we don't have a recovery disc she looked it up online and got some codes. I think she out something in wrong as it won't load past the gray apple screen with the spinning cog. We have tried the cmd actions. We don't have the original disc if the mac came with one but we have the snow leopard upgrade disc. We can't get to an apple store with it so any ideas?

To restart with the SL Upgrade DVD, insert the disc into the SuperDrive and when you hear the startup tone hold down the Option key until you see the install dic and follow these directions:
Insert the Snow Leopard Install DVD into your Mac’s optical drive.
Once the Snow Leopard DVD mounts on the desktop, the Mac OS X Install DVD window should open. If it doesn’t, double-click the DVD icon on the desktop.
In the Mac OS X Install DVD window, double-click the ‘Install Mac OS X’ icon.
The Install Mac OS X window will open and present you with two options. You can continue with a standard upgrade installation, or use the utilities included on the install DVD. Click the ‘Utilities’ button.
The Snow Leopard installer will inform you that in order to use the supplied utilities, you will need to restart your Mac and boot from the DVD. Click the ‘Restart’ button.

Similar Messages

2012 MB Pro 13" came with Lion - nearly new, second owner. Stopped responding yesterday in the middle of work. Forced quit, booted up single user, ran fsck -fy, mount -us /, reboot. Stuck on grey apple screen with spinning wheel forever now. Please help

2012 MB Pro 13" came with Lion - nearly new, second owner. Stopped responding yesterday in the middle of work. Forced quit; reboot stuck on grey apple screen. Booted as single user; ran fsck -fy; mount -us /; reboot. Still stuck on grey apple screen with spinning wheel.
Any advice please?
Thanks

Run through this list of fixes, your solution is there
Step by Step to fix your Mac

Imac 2008 stuck on grey screen with spinning wheel no discs I lost them

HI, I have a imac 2008 24" someone help please.stuck on grey screen with spinning wheel after 5 minutes mac just restarts again.I have no restore dvds as I borrowed them out and never got them back thanks

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

In the process of reseting phone and got stuck on black screen with spinning logo

in the process of reseting phone and got stuck on black screen with spinning logo
what do I do

Hey amreed2012,
Thanks for the question. The steps in the following resource may resolve your issue:
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Phone Stuck on blach screen with Spinning Wheel

Iphone 3G stuck on black screen with spinning wheel and unable to hard reset plug or unplug with PC.
I tried holding both home/off for 10 sec, 20 sec, 2 min nothing.... Itunes can't read my iphone and nothing happen to the phone....
I saw somewhere to wait for a flash pf the apple logo on screen every 10 min and reboot but after looking at the screen for 30 min non stop, no apple logo....
Please help because I don't want to change my iphone right now because i'm waiting for the iphone 5....

i refirmated all teh drives and started over three months later one of the two drives died completely.. M

My imac is stuck in gray screen with spinning wheel

My iMac is stuck in gray screen with spinning wheel. I'm running Mountain Lion, any idea how to fix it. Pls help.Thx.

Welcome to Apple Support Communities
Press Shift key on boot and check that the computer starts. Finally, restart

My Imac won't boot up. It is stuck on apple logo with spinning gear.

My Imac won't boot up. It is stuck on apple logo with spinning gear. It will not boot in safe mode, my install disc will not read and fsck wont fix it.. I can hear the hard drive spinning. So i know my drive is not bad.. Right before this happened i was low on space so i deleted a bunch of movies but for some reason i had to change my drive permissions to do so..

Is your data backed up? If not, see these means of data recovery: https://discussions.apple.com/docs/DOC-1689 If it is backed up, then purchase Alsoft Disk Warrior. Boot it using the Option key of a wired Apple keyboard.

Macbook stuck on apple screen with status bar

Macbook pro 17in stuck on apple screen with status bar
i have snowleapord
when i start in verpose mode it says this at the end:
invalid node structure
(4,38887)
** The Volume Macintosh HD could not be verified completly.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
fsck failed
kext loading now disabled.
Kext unloading now disabled.
Kext autounloading now disabled
Kernal requests now disabled.
Can't get kexted prot.
syncing disks... Killing all processes
continuing
done
CPU Halted
I havent tried re-starting from Start-up disk because I am not home for 5 more days and it is at home.
If anyone could help or tell me my problem or point me in the right direction i would apreciate it.
uploading image of verpose screen to flickr.. http;//www.flickr.com/photos/briannasue

The disk utility program has found an error and cannot repair it - Disk Utility is not able to repair the drive it has been booted from. You'll need to restart the computer using another disk - this is one reason why I always travel with an emergency DVD and a bootable external drive. Invalid node structure errors are non-trivial; sometimes Disk Utility will repair them and sometimes not. Disk Warrior has been my second line of defence for disk drive problems for years.

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel HELP?!?!

Downloaded OSX Mountain Lion on MacBook now stuck on grey screen with spinning wheel. What can I do, will I loose everything on my laptop?

ashg23 wrote:
Thank you, I have restarted but it is still stuck at the grey page with the spinning wheel? Any idea?
Have you started up holding down Command + R and attempted to install again?
Pete

MacBook stuck at grey apple screen with spinning logo

I have a 2010 White MacBook that is stuck at the grey apple screen with a spinning logo. This seems to have happened after I installed the newest version of iTunes. The system slowed down a lot and when I ran the system monitor It said all of the memory was being used up. I had to force shut down by holding the power key. Upon reboot, I got the grey apple logo screen, a spinning wheel, and a progress bar. The progress bar gets about a quarter of the way and disappears. The spinning wheel remains. Initially, I let it run for awhile. Nothing different happened. I took off the Mac jack adaptor, and replaced the battery. Nothing happened. I kept trying to start it up and one time it worked. I backed up my files to two external hds via time machine.
Upon the next boot, i have been stuck at the grey apple logo screen, spinning wheel, and progress bar. Each time the progress bar remains and then disappears after going about a quarter of the way. I have tried cmd-D, cmd-s,cmd-opt-p-r, cmd-v but I don't think any of those work (I don't know of i'm doing them right) . It just stays on the grey apple logo screen. I tried using the option button at the startup and it goes to a lock screen. I typed in the administrator name. That didn't work. I tried the apple password. That didn't work. I tried every password that I know. None work.
What can I do to fix this?
Thank you.

See if this Apple note will help. When it gets to Disk Utility, boot holding the command and r keys down so you get into recovery mode, and run Disk Utility from there. Assume you have OS X 10.7 or later. If you're still on OS X 10.6, then follow directions to boot off the OS X DVD sent with your system or a retail OS X 10.6 DVD.

Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

Hi guys,
since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
-2 weeks ago, i installed smcFanControl app
-Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
-entered Single User Mode and i get an error
SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
-followed some instructions found online, but can execute the correct commands in SingleUserMode
tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
any ideas what may caused this and how can i fix this?
Thanks in advance

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

G4 TiBook won't go past gray apple screen with spinning black wheel

Hi,
I am trying to get this machine to boot, and things are very strange.
The latest development, which I'll start with, is that I just finished an install of Tiger on the machine. It gets to the gray Apple screen with the spinning cursor. However, the startup/welcome music to Tiger played in the background, and it started walking me through keyboard commands via Voiceover.
1) It will boot off of a Tiger or Panther startup DVD/CD, and will install without incident.
2) It will actually boot from the hard drive with a fresh install of OS 9.2.
3) Another machine can boot the hard drive while the TiBook is in firewire target mode.
4) I have tried a brand new hard drive, and have tried to boot other machines while they were in Firewire target mode - same behavior.
5) I have tried resetting PMU, PRAM and NVRAM multiple times. Every time I boot into OF, the very top message is "NVRAM Corrupted" and it performs an init-vram command, to which it says "OK".
6) Before all of this happened, the machine underwent an upgrade from Panther to Tiger. Everything was working fine (albeit slowly, since the hard drive was almost totally full) until PRAM and NVRAM were reset. After that, the only thing the machine has been able to do (with OS X on the drive) is boot to this gray splash screen.
7) The hard drive has been wiped completely with a fresh install of Tiger and even Panther several times. Same behavior.
8) Have tried taking out the memory, changing the memory - all resulting in the same startup screen.
I've tried booting up using Verbose mode as well as Safe mode. Doesn't make any difference. The only thing I have not tried is taking out the CMOS battery (which I don't yet know where it's at on this machine).
Does anyone have any other suggestions?
Thanks
Erik

Hi Erik,
Every time I boot into OF, the very top message is "NVRAM Corrupted"
Just one thought fwiw: I'm wondering if you have a bad cache. I can't remember if you can access your Apple Menu>About This Mac>More Info while booted to your install disc, but if so, see if your L2 and L3 cache are listed. If that doesn't work, again I don't remember if this will work, but while booted to FWTDM open Applications>Utilities>System Profiler on your Ti HD and see if caches are listed. Which Ti (CPU) do you have btw?
If it does turn out to be a cache issue, not good news, as cache is incorporated into the logic board, and the "repair" is actually replacing the LB.

IMac freezes at apple screen with spinning wheel.

Last night my iMac crashed. When I started it back up, it just stuck at the apple screen with the little spinning wheel. I took it to the Genius Bar and he said to just do a full OS reinstall.
Does anyone have any other suggestions? I just want to make sure I've covered all the bases before I delete all my stuff. I've run disk utility (from the install disk) and I've also run the Hardware check program from the install disk. Any help would be appreciated greatly.

Last night my iMac crashed. When I started it back up, it just stuck at the apple screen with the little spinning wheel. I took it to the Genius Bar and he said to just do a full OS reinstall.
Does anyone have any other suggestions? I just want to make sure I've covered all the bases before I delete all my stuff. I've run disk utility (from the install disk) and I've also run the Hardware check program from the install disk. Any help would be appreciated greatly.

TS1367 I am getting a white apple screen with spinning clock like logo-I can't do anything it is frozen and continuously spinning

I am getting a white apple screen with a spinning clock like logo-I can't do anything it just keeps spinning

Other troubleshooting information.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Iphone 5 stuck at apple screen with loading bar

New iphone has been stuck for about 4 hours at the apple screen with the loading bar. Help please.

Reset, hold both home and power buttons until the iPhone begins to restart, usually takes about 10 seconds of holding both buttons.

Mac stuck on Apple screen with spinning cog

Similar Messages

Maybe you are looking for