Mac stuck on the grey apple screen startup? Follow these steps to re-boot....
So today I had a little scare with my Macbook. It was stuck on the grey apple startup screen with the loading icon. Switching it on and off did nothing and neither did waiting. I did a lot of browsing to try and find a solution but all the forums ended in 'looks like thats the end of my mac' or 'I think i've lost everything' or 're-install Os' blah blah etc. I DID NOT WANT TO LOSE ANYTHING!!! and I'm guessing neither do you! Ok so enough talking, in the end I found a solution which worked perfectly for me and I did not lose anything!!!!!:
Step 1
If the Mac is on switch it off.
Once it is off, switch it on again but this time as soon as you press the power button to switch it on, hold down the Apple cmd key + S.
Hold this down untill the 'safe boot' screen appears.
A black screen with white writing should now come up.
Step 2
Once the screen has loaded, at the bottom type:
/sbin/mount -uw /
[press enter]
then type:
chmod 775 /
[press enter]
then type:
exit
this re-boots the mac. As soon as you have done this the mac should load up again as normal!! Voila!!!
Hope it helps!
Someone suggested this to be risky. worked for me but DON'T DO IT WITHOUT RESEARCHING FIRST and if in doubt CALL APPLE!!!!!
Similar Messages
-
After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen
After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen
See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570 -
When i am using the mac. often it will suddenly freeze, only the coloured loading wheel still moving. I will leave it for hours to unfreeze but nothing. The only remedy is to turn it off by the button. Moreover, sometimes when i turn it on it gets stuck at the grey apple screen and i have to turn it off by the button and on again. This can happen up to 10 times until it turns on! What can i do?
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
If you are able to reach your desktop take note of how large your hard drive is and how much hard drive space do you have left?
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you. -
My Mac Won't leave the grey apple screen at start-up.
Hey,
My macbook, when it starts, will just stay at the grey apple screen with the loading thing under it. I've tried turning it off, turning it back on, Doing the Command COntrol Power thing, and nothing seems to work.
How can I fix this?yes, i have the same problem exactly, and according to another thread, it seems to be happening to macbook users who upgrade to the latest itunes. my fix can get you macbook up and running, tho it requires an external drive. your 'can't install' message may be a sign of something more serious now tho- it could be your internal drive's data is lost.
anyway, plug in an external fw/usb2 drive so the leopard install disk can see it for installing on to. my internal drive showed up as an option, but i chose to install to the external. after this was finished, i booted off the external, and there was all my data, available from the internal drive (still couldn't boot from it tho) after saving what i wanted to save, i then used the install disc to do a reinstall using the 'archive and install, preserve user and network' option, under the option/custom button.
back to macbook! btw, the external need to be formatted using a 'guid' flag (it's for intel booting), so if your external's not in this format, it will need to be repartitioned. (it's always something!) -
I can't get past the grey apple screen using mavericks
I can't get past the grey apple screen trying to boot up with Mavericks. I had been using Mavericks for about a month (only had issues of freezing occasionally). I read in one of the posts here that I should try holding command R down when booting. I did now I just get a grey screen without the apple. Any advise?
I have a Mac MiniHello ther cnickers,
It sounds like the initial install of Mavericks went ok, and you have been using it for a while, but now cannot boot to your desktop and are stuck at a gray screen with an Apple logo. I would recommend a couple of things here:
First, try performing a Safe Boot to see if that will load up for you. If so then leave Safe Boot and restart from the Apple menu to try and get to your deskop:
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
From: Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If that works fine, I would next also verify and repair your disk if needed.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
My G5 (non intel) starts up but does not go past the grey apple screen
My G5 (the non intel kids machine) starts up but does not go past the grey apple screen. It chimes, the grey apple screen comes up 20 seconds later with the rotating thing-ie, then the fan kicks on 1 minute 35 seconds later. It stays on that screen indefinitely.
I tried restarting without any cables connected to it with the same outcome. I tried to insert the OS X disc and pressing the "C" key and cannot get past the password page. I also tried to start it pressing the OptionCommand+PR keys with no results.I am experiencing this problem as well. I had assumed it was a result of attempting to uninstall the Boot Camp drivers because I was getting a blue screen error every time I tried to startup with Windows. But I had also installed some updates for OS X at the same time so it could have been caused by that as well. I've erased everything now and I am trying to reinstall OS X but I'm three attempts in now because the installation has just been getting stuck in an indefinite loop at random points during the installation.
-
My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Ibook stuck on the grey loading screen
Stupidly i was messing around and accidentally unlocked the battery which fell out while my ibook was on sleep method. Now the ibook will only start up and get stuck on the grey loading screen.
I fear i have corrupted the hard drive, i have tried resetting the logic board by logging into the base router( i don't know if thats the right terminology), i did this by pressing power, then holding down apple key and v. But when i do this after the normal writing on the screen finishes, a message comes up saying
"Warning completing a zero block transfer"
I have reset my logic board before but this message has not come up.
Any help resolving this issue would be fantastic.
Thanks in advance!!!!!!!Not resetting?
Well that presents a problem because you need to check the startup disk, repair the disk if necessary, or restore OS X using OS X Recovery
You can resstore from a Time Machine backup using OS X Recovery if necessary. -
MBP OS Leopard update that now hangs at the grey apple screen
I ran software update for OS Leopard on my MBP yesterday and it has been in a continuous boot cycle that never gets past the grey Apple screen. The only sign of life is that periodically it will make the boot noise and the computer remains quite warm. I have tried shutting down completely and then rebooting in safe mode and also rebooting using the OS disk but I'm pretty sure the Leopard OS disk doesn't work as a boot disk. So my first issue is to try and fix the boot problem. The second is that clever me didn't back up before hand so I am looking at trying to connect by firewire to my iMac and try and recover some files... given the issue would this be possible?
See if it boots into Target mode...
http://support.apple.com/kb/HT1661
If so it should act like an expensive Firewire Drive for your other Mac. -
My G5 shut down + when it restarted it won't go past the grey apple screen
here's a general rundown of how I got to this point...
last yr the hard drive on my '05 G5 went, so i had it replaced (6-7 months ago) and for the last 2-3 months i've had problems with involuntary shut downs (cut to black) it started happening once a day and then there were days where it would happen more often and then less often and eventually got to a point where it was happening every 5-20 minutes, so i brought it in to get looked at and was told that it was the power supply that was malfunctioning. I mentioned that I would likely be buying a new mac in the coming weeks ( i did yesterday) and was told that I should be ok between now and then without having it fixed and then when i did get my new computer they would transfer all of my old data onto the new computer and would be installing the new power supply before selling it to a local school. then, 3 days before I was going to get my new mac, it shut off yet again, but when it rebooted it never went past the grey apple screen. after 4 or 5 minutes the fan comes on and is amazingly loud and this is where it stays until i shut it off. i'm not sure if this is simply the power supply finally going going gone or if this has something to do with the very new hard drive or who knows what else; i just want to get my info from the old computer onto the new and hopefully get the couple hundred dollars that i was told my g5 was worth. is there something i can do to get past the grey screen before i bring it in?
thanks in advance,
JeremiahI doubt that your data have been lost, the hard drive should be fine. Too bad that you're going to sell it, you could have used the hard drive in an enclosure to back up your new computer to. Please remember to make frequent backups/clones, I use SuperDuper! and it works perfectly. I have used it to re-clone a drive from the external when things have gone bad, you can also boot from a SuperDuper! clone.
Anyway, let us know how things go, I'm pretty sure your drive will be fine. -
My G-5 Won't go past the Grey Apple Screen......HELP HELP HELP
I have a G-5 PowerMac.
Its about a year old.
I have used it more than sparingly. I bought it for video editing and have no other programs installed on it that didn't come with the computer besides Final Cut Pro
I tried to turn it on this morning to edit a project i'm working on and the thing just wont get past the Grey Apple Screen.
I really need help here. My hardware warranty runs out on December 31st and I dont have money for the Applecare $250 is really steep.
Help me turn the thing back on and get my editing going please
Email me at [email protected] if you can help me out
thanks
Chris
Power Mac G5 Dual Processor Mac OS X (10.4)Hey Cris
I just got thru the same problem. My G5 was only 30 days old. I contacted Apple and after many phone calls I ended up purchasing the Applecare.
The parts were on back order for two weeks and they ended up replacing the logic board and the processor.
Good Luck!!! -
G5 Boots up and hangs at the grey apple screen, then fans rev up loud!
I am so confused. For some reason my G5 boots up, I hear the tone, and it gets to the grey screen with the apple. The circular "wait" image never comes up and then after about 1 minute, the fans rev so high it sounds like my computer is preparing to take off! I tried taking out all the RAM and reseating it. I even tried booting with each pair one at a time. I tried removing the battery, and putting it back, I tried unplugging, resetting the PRAM, removing the DVD drive, and replacing the DVD drive. No luck. about 4 weeks ago i was able to get it to start up with an install DVD in there when (and this may be dumb luck) I tried a trick I read on these forums where you use a hair dryer to heat up the RAM board. I reinstalled Tiger and it seemed to work perfectly. Then it revved up the fans and froze, no kernel panic on the screen. The heat trick did not work again. Now all I get is the grey apple screen with revving fans. It won't even recognize that I have the install DVD in there when I hit the "C" key. Does anyone have any suggestions?
Hi !
(don't mind my writing in english... I speak Dutch originally)
First question : What type of Powermac G5 do you have...?
If it's a liquid-cooled, then you might (perhaps) have trouble...
(we keep this (for the moment) aside)
If it's an air-cooled, just boot up pushing the Alt-button untill the "boing" sounds.
Then start up from your system-HD (select it, if you have more then 1).
Still doesn't work: insert your back-up(cloned) HD (who doesn't make a clone these days) & re-boot (same procedure as described above)(or just connect it over FireWire & select the HD after rebooting with Alt pushed)
When you were able to boot from your (original) HD > let the "stetoscope-program" (I forgot the name, I'm now at work right now & no Mac nearby) (programs > help-programs > stetoscope) run on your HD (controlling the Disk (right side button) & it's dedications (left side button). Patience...
If you (untill now) still have no luck (but, as some people like myself, have more then 1 Mac) > (re-)install OSX 10.5.8 (if you have it) or 10.4.11 on a (spare) HD & after installing > insert in your G5 & try again...
If still no (good) news... Let (me) know.
Grtz, H. -
Upgraded to osx lion via bootable USB stick but start up now just hangs on the grey apple screen
Hi. I've just recently upgraded from snow leopard to osx lion 10.7.3 on my laptop and it works perfectly! However I then tried installing on desktop and problems......
1. I got the 'the error can't install message' so after researching' I made a bootable USB stick with lion on it.
2. Installed on start up from bootable USB stick, no problems their.
3. Restarted and it just hangs in the grey apple screen.
I've reset the PRAM, started in safe mode, fixed disk permission etc, Even done this (http://hints.macworld.com/article.php?story=20070204093925888).
I'm going to leave the grey screen over night to see if it does start up, but then we have the problem of an extremely slow start up.
So.... I am posting this to find out if anyone else has this problem and fixed it without having to do a full clean install as some data like email lists etc I never backed up (I know stupid).
Hope someone can help as i am lost on what else to try.
HELP!?!?!?
Dan.Update 01.03.12
Computer is starting now but.... It takes 10 minutes and that is without my sound card, hardware and external hard drives plugged in, gonna test that now.
Are their and fixes for slow start ups?
Dan. -
My mac is stuck on the grey loading screen?
My mac, is stuck on the grey startup screen. I have tried everything that everyone has said. Yes, I have reset the PRAM, I have tried a safe reboot, I'm NOT resetting it! It just won't start up, I have a seagate 3TB backup drive, but I have no way to get inside the computer, so I can't activate it.
Please help!Not resetting?
Well that presents a problem because you need to check the startup disk, repair the disk if necessary, or restore OS X using OS X Recovery
You can resstore from a Time Machine backup using OS X Recovery if necessary.
Maybe you are looking for
-
Report Builder 3.0 Licensing Questions
I have several questions/clarifications on the licensing and use of Report Builder. Any help you could provide, or other resources I should contact would be much appreciated. I've looked through the license that is included when installing "SQL Serve
-
Is it possible to call VB dll in Java
Is it possible to call VB dll in Java? If yes then How?
-
I registered the CS5 products on my Adobe account, but I didn't purchase them with that account, I can't access the order and then, I can't benefit from the special offer of CSCloud. I don't have access to the account that ordered the purchase. How c
-
Activation of print button in me52n
Hi All, I have created a form for ME52n transaction and i want to ettach the print button in the menu.there r no menu exits available. how can i do this? thanks Abhilash.
-
How do I transfer a current photography CC subscription from my old computer to a new one?
How do I transfer a current photography CC subscription from my old computer to a new one?