Mac stuck on white screen after booting.

My Mac boots and after the spinning wheel at apple logo vanishes it gets stuck on white screen..
I was running the following commands in terminal when my mac froze and I had to restart it.. After that it is on the white screen..
The commands I ran :
cd Applications
cd XAMPP/xamppfiles/htdocs/experiment
ls -l
sudo chmod 0644 /
And after that my Mac froze and I had to force restart by holding the power button.. After restart its stuck on white screen just before the login screen.

I am able to boot in Recovery HD.. did the repair permissions but that sudo command had affected the entire drive.. Reinstalling was the only option left..
Although I had to do
sudo chmod 0644 /Applications/XAMPP/xamppfiles/htdocs
but ended up pressing the return key just after the first "/"
Thanks for your help.

Similar Messages

Mac stuck on white screen after software update

I updated to snow leopard and then then to 10.6.8. After the updates had installed, my computer restarted and now it's stuck on a white screen. No key shortcuts work at all, I've tried. None of them work. Every time I try to turn it on it's just frozen on a blank white screen. Twice it's gone to the apple logo and been able to start up after 20 or so minutes of being on the white screen but each time it froze. I don't know what to do.

There have been problems with the Apple servers not linking to support articles, so some links may not load the first time.
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup – Computer Stops or Delays
Startup Issues - Resolve
Startup Issues - Resolve (2)

Mac stuck on white screen after SMC reset

My late 2011 17' MacBook Pro running Yosemite loads about 35% in the loading bar at the start up and then goes to a white screen. I've loaded using verbose mode and haven't seen anything odd; I've attempted to boot to safe mode but it just gets stuck at a white screen--the same goes for recovery mode; I've reset the PRAM and nothing happens; I've also reset the SMC and nothing happens. I went into single user mode and my volume is said to be OK after I run the fsck - fy command. The problem started right after I initially reset my SMC (I wanted to cure the problem of my Mac restarting randomly). At this point, my main concern is being able to back up my drive if possible since a have months have elapsed since my last backup. What else can I do?

Hello zacmon,
Thanks for using Apple Support Communities.
From your post I see that your Mac will not boot past the gray screen, even after doing the troubleshooting steps you've mentioned. There are still some steps to complete in the article linked to below, starting with removing any third-party RAM.
Mac OS X: Gray screen appears during startup - Apple Support
Have a great weekend,
Alex H.

27" 2009 iMac is stuck on white screen after OS X Maverick update

27" 2009 iMac is stuck on white screen after OS X Maverick update. How do I get past this White Screen? I have tried to use the PRAM reset, holding down Shift,Command, R, and P after turning off computer then when I turn it on, having those pressed until I see the apple symbol. I only hear one chime. Never get to a second chime. Thank you.

Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off. I had to do

My MacBook pro is stuck on white screen after shut down. Now, neither this is turn on nor turn off.

You should be able to turn off your MBP by pressing the power button down continously for about 5-10 sec. When you reboot it you are going to want to enter into a terminal screen. Hopefully the following YouTube video helps: http://www.youtube.com/watch?v=qKOX72xNmbo

IMac will not boot. Stuck at white screen after chime.

I am starting a new thread this because it seems that other people with this problem are able to get their Macs working with some sort of keyboard combination on boot. I am not. Nothing is working. My computer is currently a 27 inch brick... Actually a lamp, since it is frozen on a really nice white screen.....
Installed Yosemite on my 27" iMac (early 2010, i7) when Yosemite came out a couple weeks ago. Everything was working fine but it wouldn't read my external drive, so I did a reboot. After the reboot, it freezes on the white screen after the chime. No keyboard combinations work to get it to do anything....also, if I hit the power button it shuts off immediately.
Nothing is working to get it moving. And yes, I am using a usb keyboard, not the Bluetooth, to try to hit any of the keyboard combinations posted in various discussions.
My AppleCare is expired, so I'm going to be very upset if I have to go pay to have Apple fix their problematic software. Any help you guys can give will be greatly appreciated.
Thank you,

See if you can boot into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup - Gray Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)

Stuck on white screen after login

My 13" macbook pro is stuck on the white screen "after" the user login page. It started happening after installing the latest update then gave me a "start up disc is full error also. I know to clean up unnecessary files but can't do that when it's stuck before I can get to a point where I can access them. Any Ideas and help would be great.
Thanks
RH

Try a PRAM reset:
Power off, power on holding the following keys:
OPTION+COMMAND+P+R
Continue to hold thee keys till you here the start chime 2 times hen release.

Mac stuck at white screen later shows blinking folder with question mark

Today for some reason my mac froze and I had to manually start it back up. After I started it back up it was stuck at a white screen and later on a blinking folder with a question mark came up. I've tried using shortcut keys on startup but none of them are working. it just keeps on showing the white screen and later on the blinking folder with the question mark. Is it just a problem with the HDD that's supposed to read the HD? Or is my HD the problem and I lost all my data?
MacBook Pro
Late 2012 model
15 Inch

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Major problem - Stuck on white screen after chime

Alright, long story short, I tried to install bootcamp, I got the partition and everything and it rebooted to the win XP blue screen install thingy.. I formatted the drive (thinking it was the drive bootcamp created) and I think I probably formatted OS X's drive, so I quit installing XP. So now when I start my iMac, I just hear the chime and I am stuck at the white screen, probably because I have no OS.
I want to reinstall OS X (I just got my mac, nothing to lose) but I cannot seem to be able to boot from the install CD no matter what I do...
Anyone know what I should do? I tried holding C, option-C, apple-option-C, everything while restarting with the OS X cd in.
I will have a OSX-less christmas at this rate
On a normal PC I would just go into the BIOS and boot from CD but I don't know how that works on a Mac... HELP!

Welcome to Apple Discussions. Sorry about your Mac-less holiday!
An FYI, Macs don't use Bios, they use the more modern Extensible Firmware Interface (EFI).
Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there. And that would be where the Boot Camp pros hang. This has probably happened to others.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta
Good luck!

MacBook Pro mid 2013 13' gets stuck on White screen after login.

I'm in safe mode right now. I Booted it up in Safe Mode by holding down the shift key during startup. What do I do now to not get the white/grey screen during startup after login?

Mac OS X: Gray screen appears during startup
If the grey screen occurs when you boot normally (not safe mode) try bypassing your Login Items by holding a Shift key in the same manner during login (i.e. not during boot). If you can log in, you effectively isolated the problem to one of more of your Login Items.

Help! Stuck on white screen after sleep mode and won't start again!

Bought the iMac last week, updated to 10.5.1. Worked well until this morning after I did a security update. Then put it in sleep mode - and basta! After I wanted to work on it again - it didn't restart. So, I had to switch off using power button, but it never started again and always got stuck on the white screen with the Apple logo and the rotating loop. Tried to repair permissions - cannot do it, as it says there is an error. Tried to re-install from DVD the Leopard while archiving the previous information - can't do either - says error. Now trying to re-install it again with an erase option. But this is not a good option, people! This is pretty very much disappointing, Apple!
Can anyone help, please!

Boy that is way too bad.
Could you tell us what the error message was?
While sometimes the error messages are not very informative, other times they are. That might be a clue as to what is going on.
When you restart from the DVD you have the option to access Apple's Disk Utility and repair the disk.
You might want to try that, skip repairing permissions at this point.
You can also reset the computer by unplugging all cables including the power cable for at least 15 seconds and then plug in the power cable and keyboard and restart.
You can reset the PRAM by holding down the command-option - p - r keys simultaneously during restart and waiting for the startup chime then releasing those keys after the second chime to allow the start to continue.
HTH

Mac Stuck in White screen with apple??

So i tried to install os x Lepard on my mac book...i started to install it but when i realized that i only had about 50% of power left i panicked and forced the computer off so when i got home (because at the time i wasen't at home) i hooked up the power cord and it is now stuck on a white screen with the apple logo and the little loading pin wheele going around and around how do i fix this? or can i fix it(by myself)?

Ok so i FIXED IT!!! what i did was a held the option key when i started my computer then i clicked on the disk gave it about a minute and everything started up again!

Mac stuck on white screen with apple logo at startup

It's a few days i have this issue.
When i turn on my macmini (late 2009) it does the startup sound, but when the white screen with apple logo appears it stucks on that screen.
To solve this problem i have to unplug the power connector, when i restart it works normally.
This happens randomly, not at every startup.
I switched from normal HD to ssd HD (brand new one), i have the same problem with both HDs.
Since black outs are not good for computers i woult solve this problem.
Does anybody have my same issue or know what's wrong?
Thanks!!!

Hello, tough to tell what it might br.
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

White screen after boot, only status bar visible

A few days ago, I had a message on my HP Veer 4G that a restart was required. I'm assuming something had been updated. After the reboot, my phone booted to a white screen with only the status bar at the top being visible. I've tried the triple toggle and the Funtion+Sym+R methods of restarting the phone, but the same thing happens every time the phone reboots. At first the SIM had a PIN set, so the status bar just said SOS only - SIM Lock. I removed the PIN with another phone, then the status bar showed the phone had registered with the AT&T network, but still the rest of the screen was white, so I couldn't do anything with it.
With the white screen, the gesture area would still respond to swipes back and forth across it, and the white screen would show response to wherever I would touch on the screen.
I don't know what I did, but by pressing a bunch of keys as the phone was rebooting, I got the option to reboot or erase entire phone contents. I chose to erase the phone and finally got to set up the phone from scratch. Can anyone explain what just happened?
Post relates to: HP Veer p160una (AT&T)

Hello!
This usually means some software on the phone went catastrophicly wrong thus the need of partial erase. Could you send me a private message of your palm profile email address? Have you installed anything to the phone outside our app catalog? Keep me posted.

Mac stuck at grey screen after startup sound. Help

Help

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Mac stuck on white screen after booting.

Similar Messages

Maybe you are looking for