Mac suddenly stopped communicating with LAN devices, but internet access still OK.

My iMac has suddenly stopped communicating with my wireless printer and my blu-ray player (DLNA).  Both have worked well for the past 3-4 weeks since I set up a new wireless router (Cisco EA4500). 
Troubleshooting so far:
Printer Function: My wife's MacAir and my iPhone both print wirelessly to the printer. [OK]
2nd Printer connected to Mac via USB. [OK]
Blu-Ray Player Function: System is able to reach the internet (YouTube) via the wireless router. [OK]
Mac Function:
Internet access. [OK]
PRAM and SMC resets: [nothing]
Restarted "Playback" media server software for blu-ray (DLNA) server. [nothing]
Printer Setup: I have deleted and re-added the wireless printer and reset printer system. Mac will "see" the printer on the network, but cannot communicate with it.  [nothing]
Attempts to use Epson Utility: Connection Error
Router Function:
Checked Firmware.  Most recent version prior to the "Cisco Cloud" fiasco - my router did not auto-upgrade and was not involved in the most recent firmware upgrade.
I just cannot get the Mac to see any other hardware on the local wifi network, but the mac has no problem connecting to the internet.
Any ideas?
Travis

Happened to me.Drove me crazy. Turns out, iMac can fix itself.
Go to system preferences then network and select the connection (wireless or ethernet) that you want to use.At the bottom of the box you'll find "Assist me". click that and follow the prompts. it will likely telly you that your settings are screwed up (surprise) and ask if you want to fix them or let DHCP do it. Just let DHCP do it.

Similar Messages

  • ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

    Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
    (Generic Name (E: H - T-S D D A S - 20N ATA Device)).
    About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
    I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
    My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
    Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
    Hewlett-Packard HP Pavilion dv9700 Notebook PC
    iTunes 10.2.1.1
    QuickTime 7.6.9
    FairPlay 1.11.16
    Apple Application Support 1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Driver not found.
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0016AB580A7B0C28
    Current user is not an administrator.
    The current local date and time is 2011-04-14 17:52:25.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 7150M / nForce 630M
    ** External Plug-ins Information **
    No external plug-ins installed.
    The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
    iPodService 10.2.1.1 (x64) is currently running.
    iTunesHelper 10.2.1.1 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: H-T-S DDA
    S_-20N, Rev W_05
    Audio CD in drive.
    Found 1 songs on CD, playing time 255:08 on Audio CD.
    Track 1, start time 00:02:00
    Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed succeeded.
    The drive CDR speeds are: 3 9 16 24.
    The drive CDRW speeds are: 3.
    The drive DVDR speeds are: 3.
    The drive DVDRW speeds are: 3.
    Error Correction is turned on for importing audio CDs.
    I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
    Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
    Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

    Okay ... checking something else:
    Current user is not an administrator
    Is that true? Or do you in fact have a Windows user account with full administrative rights?
    (It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

  • My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    You can disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
    *Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
    PDF files may also be found under another entry like Portable document.
    *https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

  • WRT54G V1.1 suddenly stopped communicating with my cable modem.

    I have been using this router for several years with no problems until today when it stopped communicating with my modem.  My Laptop and the router connect just fine but I can only connect to the internet by wired modem now.  Any thoughts on this issue would be greatly appreciated.

    Hard-reset the router for 30 seconds,Power cycle the router and follow this link to configure the router again.

  • My icloud address and calendar on my iphone suddenly stopped communicating with the icloud screens on Outlook. How do i fix it?

    My iPhone 4S was communicating fine with Outlook 2007 (Windows 7), and then suddenly stopped communicating.  Now if I add or change a Contacts or Calendar item in iCould, either on my iPhone or on Outlook, the change does not show up on the other. How can I fix this? 

    Sorry, I meant iCloud, not iCould. Actually, I couldn't

  • My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    My Mac suddenly stopped playing through my external speakers which are fine and working well with other devices.

    Have a look in System Preferences -> Sound -> Output.
    Plug the speakers out. Do you now see "Internal Speaker" as the name from the Built-in device? If you replug your speakers, is it now changing to "Headphone?

  • My machbook pro has suddenly stopped syncing with icloud. I am giving password of my apple ID but its not accepting. but by the same ID and pass i can open my icould in browser.

    my machbook pro has suddenly stopped syncing with icloud. I am giving password of my apple ID but its not accepting. but by the same ID and pass i can open my icould in browser.

    Another user just has a similar issue tonight and I advised him to go to the below Apple support link to see if the password was recognized there, which eventually resolved his username/passowrd issue. Give it a try and see if it works.
    https://daw.apple.com/cgi-bin/WebObjects/DSAuthWeb.woa/wa/classicLogin?appIdKey= 58ef9db8ff4d201409e7270a68e4408ae1678e1618204c476572a1b5e5fb3518&path&language=U S-EN

  • My iPhone4 docks correctly with some devices but not others, please help!

    Hi,
    Firstly spologies if this is old news but sometimes its easier to 're-ask' than trawl thousands of pages!.....
    I have a 3-year old iPhone 4 that has developed a problem which i'm trying hard to solve;
    *Phone used to dock fine with anything and everything - this was about 1 year ago.
    *for no apparent reason it ceased docking with my Bose Soundock and a Logic3 accessory dock (connected to a hi-fi) at home
    *symptoms were; it would charge and operate as normal whilst docked but would not play music through either (the Logic3 dock did not acknowledge it was docked). Otherwise it would sync and connect normally with iTunes, etc. and connected fine when plugged into my car.
    *I reset it, restored it from back-up, updated/reinstalled iOS (this has since updated at least twice) with no other effects. Also checked and reset all settings.
    *I subsequently bought a Pure Contour dock as I was able to try it in the shop and my phone worked with it, plus it has Airplay anyway. I have since, in an attempt to find a bedside DAB radio/alarm dock that works with it, found that it works fine with some devices but not others with no rhyme or reason as to which.
    *2 days ago I changed out the docking port myself using a cheap replacement bought from Amazon, to see if it would cure.
    * now the problem is reversed! The Bose and Logic3 docks I have, that it wouldn't work on before, it now DOES....and the Pure dock and my car, which it DID work with before now fail to connect with it!
    *just to reiterate this, my wife's gen3 and gen5 iPods dock and work faultlessly with all devices mentioned....and mine had done previously.
    to my knowledge it is NOT;
    - a compatibility issue. The phone used to work fine on everything I had. Then it stopped. How's that?!
    - a connector issue. The male connectors on all docks haven't changed.......and the female connector in my phone has changed from liking selected devices to then liking the others!! (it is female after all ;-) !)
    -a software issue. iOS has been updated and the phone wiped and restored and all sorts so many times I can;t see how it can be!
    could it be a problem with the data exchange between phone and device when it is docked??
    or do I really need to try changing the port for an 'official' one??
    or is it just broken and that's that?!

    It's either a problem with the connector on your phone (dirt, lint, bent pin, corrosion) or with its connection to the motherboard inside. Cleaning the connector is a good place to start; either a dry toothbrush, air blast can or wood toothpick. Next inspect it carefully with a good magnifying glass or jeweler's loupe. If nothing turns up it is probably damage inside, which will be difficult to fix. Aren't you due for an upgrade about now? Your iPhone 4 is 3 generations out of date!

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

    I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall).  Though the initial replication seems to be
    happening it is very slow (the folder in question is less than 3GB).  I'm seeing these in the event viewer every few minutes:
    The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
    Additional Information:
    Error: 1726 (The remote procedure call failed.)
    and then....
    The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
    Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
    -Increased TCP Timeout to 24 hours 
    -Added the following values on both sending and receiving members and rebooted server
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
    Value =DisableTaskOffload
    Type = DWORD
    Data = 1
    Value =EnableTCPChimney
    Type = DWORD
    Data = 0
    Value =EnableTCPA
    Type = DWORD
    Data = 0
    Value =EnableRSS
    Type = DWORD
    Data = 0
    ---------------------------------more troubleshooting--------------------------
    -Disabled AntiVirus on both members
    -Made sure DFSR TCP ports 135 & 5722 are open
    -Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
    -Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
    Sending Member:
    [DFSRs.exe]
      TCP    10.x.x.x:53            0.0.0.0:0             
    LISTENING       1692
    [DFSRs.exe]
      TCP    10.x.x.x:54669        
    10.x.x.x:5722          TIME_WAIT       0
      TCP    10.x.x.x:54673        
    10.x.x.x:5722          ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64773        
    10.x.x.x:389           ESTABLISHED     1692
    [DFSRs.exe]
      TCP    10.x.x.x:64787        
    10.x.x.x:389           ESTABLISHED     1656
     [DFSRs.exe]
      TCP    10.x.x.x:64795        
    10.x.x.x:389           ESTABLISHED     2104
    Receiving Member:
    [DFSRs.exe]
      TCP    10.x.x.x:56683        
    10.x.x.x:389           ESTABLISHED     7472
     [DFSRs.exe]
      TCP    10.x.x.x:57625        
    10.x.x.x:54886         ESTABLISHED     2808
    [DFSRs.exe]
      TCP    10.x.x.x:61759        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61760        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61763        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61764        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61770        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61771        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61774        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61775        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61776        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61777        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61778        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61779        
    10.x.x.x:57625         TIME_WAIT       0
      TCP    10.x.x.x:61784        
    10.x.x.x:52757         ESTABLISHED     7472
    [DFSRs.exe]
      TCP    10.x.x.x:63661        
    10.x.x.x:63781         ESTABLISHED     4880
    ------------------------------more troubleshooting--------------------------
    -Increased Staging to 32GB
    -Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
    a. The computer object of the DFS server
    b. The DFSR-LocalSettings object under the DFS server computer object
    -Ran
    ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
    -AD replication is successful on all partners
    -Nslookup is working so DNS is working
    -Updated NIC drivers on both servers
    - I ran the following to set the Primary Member:
    dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
    Then Dfsrdiag Pollad /Member:<member name>
    I'm seeing these errors in the dfsr logs:
    20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
    Error:
    + [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
    + [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
    ---------------------------------------more troubleshooting-----------------------------
    I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried.  Does anyone have any other suggestions?  Maybe I need to look somewhere
    else on the server side or firewall side? 
    I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue. 
    Some other things I'm wondering:
    -Could it be the speed of the NICs?  Server A is a 2012 Server that has Hyper-V installed.  NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
    (Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
    -Could occasional ping timeout's cause the issue?  From time to time I get a timeout but it's not as often as the events I'm seeing.  I'm getting 53ms pings.  The folder
    is only 3 GB so it shouldn't take that long to replicate but it's been days.  The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am.  Throughout the rest of the time I have it set anywhere from
    4Mbps to 64 Kbps.  Server A is on a 5mb circuit and Server B is on a 10mb circuit. 

    I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
    185 events from 12:28:21 to 12:49:25
    Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
    Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
    Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
    Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
    Side note, 1726 is referenced here:
    https://support.microsoft.com/kb/976442?wa=wsignin1.0
    But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
    It also says...
    For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
    layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
    Command Prompt window:
    NETSTAT –ANOBP TCP
    This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
    Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
    NETSTAT -ANOBP TCP >> X:\info.txt
    Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
    =IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
    Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
    Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
    My server had 125 connections open.
    That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
    I'll see if I can find anything useful out, but a better solution would be most wonderful.

  • Not communicating with scanning device

    I am running windows xp home edition sp2 with an hp office jet 5600xi all in one printer. Just switched to google chrome and I get the" no communication with the device error message" when trying to scan but can still print and copy. 
    tried all the suggested remedies but am hesitant to reinstall. Is there another remedy and if I have to reinstall, what should I avoid?

    Hi dfeagle56, thanks for getting back to me!
    I would recommend trying a reinstall, but we're going to go about it in a specific way. I'm inlcuding documents for each section of troubleshooting that should walk you through step-by-step.
    First, I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
    Please let me know how that goes!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Why has my USB Superdrive suddenly stopped working with my MacBook Pro?

    Why has my Apple USB SuperDrive suddenly stopped working with my MacBook Pro?
    Normally I plug it in and insert a CD or DVD and it is immediately recognised, but today it took the DVD, made a 'whirring' noise for a few seconds and then stopped without being recognised.

    Try the options on this list:
    Credit Kappy.
    Try 1 and 5.
    Ciao.

  • HT203175 While trying to use my iTunes library it will suddenly stop working with the erro message Runtime error R6025 pure virtual function call.  HELP!!!

    While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
    Help???

    Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
    We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
    However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
    STRANGE! Let me know if this works for you to!

  • Windows has encountered a problem communicating with a device connected to my computer

    I have an HP Pavilion dv6 notebook; Product # WF536AV, running Win 7-Home. Without warning, when trying to boot one day I got the following error message: 
    Windows has encountered a problem communicating with a device connected to your computer. May be caused by unplugging removable storage while in use or a faulty hhd or CD drive. An unexpected I/O error. Error Code oxcoooooe9.
    I have a 500GB WDC hhd that seems to run hot.
    Cannot get into F8 Advanced Options, although I can get into BIOS (F9 & F10)
    Ran the Win 7 Recovery Disks twice. No help. Same message
    I can run Linux Ubuntu in memory (not installed). GParted shows the following:    
           Partition size    used       unused   label   flag              file system
    Sda1 76GB       14GB       61GB                                       NTFS
    sda2 400MB     300MB   100MB    SDV     Boot lba      FAT32
    unallocated 390GB
    6. No access to Recovery Manager
    7. F2: memory test passed but hhd test would not run
    8. In Ubuntu Disk Manager, report said drive had 'a few bad sectors', but hhd test would not run "Self Test- Failed (Read)
    9) Ran MBR repair disk and System Rescue disk; no luck
    10) In Ubuntu, when I look at the Windows file system, In 82 GB partition there is an 'RM' folder with an "Image" folder with 16 files.  In the SDV partition is the bootmgr folder and several others
    a) why cannot I boot to Windows off the hhd?
    b) what does SDV label mean (secure digital video; silicon data valu;tr; static driver verifer  from Windows)?
    c) is the hhd simply failing. I do not have an extra to swap out and try
    d) may the Win 7 Recovery disks bad, perhaps, and should I then download a Win 7 ISO file and try that?
    Thanks for any help. This is highly frustrating. I have already spent about 8 hours on this!

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

  • The computer is unable to establish a two way communication with the device

    Hi  I am trying to fix a problem for some one else, and I am struggling where to look next. The issue is that we are unable to check the ink levels of a HP Deskjet 1050 printer.  The error message states that the computer is unable to establish a two way communication with the device. After running through the troubleshooting guide about this issue on the HP site with no joy,  I decided that it may be the printer and suggested a replacememnt.  Unfortunately A new HP Envy 5530 was purchased and connected (wirelessly) but the issue remains. I have uninstalled the drivers multiple times, and also disabled any firewall/anti virus software in case this was interfering. I was hoping that some one could point me in the right direction next? None of the other forum posts here (or any google searches) give a solutuon which has fixed the problem.  Thanks

    No I cant. Unable to ping the printer too, not sure if this is possible normally?

Maybe you are looking for

  • Output from ssoldif

    I am having a look of the possibilty of using LDAP for Portal authentication. I have changed some portal users passwords and some portal database schema's passwords such as "portal30" and "portal30_sso" from the default ones. But when I using "ssoldi

  • Cant view photos except one at a time??, and other iphoto weirdness, help!

    My iphoto is crazy, it does weird stuff all the time. A few months ago it started randomly eating pictures and a grey block would show up where they used to be. Just recently when I open an event i I can only look at the pics one at a time, not like

  • Cant get it to replace or print to new line, please help

    2 problems. The instructions are to first replace each 's' with '$' and then print each word to a new line. Here is an example: Give me a phrase: Viva Las Vegas, babies! Viva La$ Vega$, babie$. Here is my code that is not working: import java.util.*;

  • Sencronization with iTunes for e-mail account details

    Dear Friends, I would like to sync with iphone > itunes for my contanct details and calenders. But when I made it, it also takes the e-mail details automatically that I don't want. Because my iphone works with IMAP and computer (microsoft outlook acc

  • Worklist Integration in Peoplesoft Portal

    Hello Everyone, I am exploring integration of worklist from HCM\ELM\CRM into PS Portal. As per the documentation, there is a delivered message WORKLIST_MSG for this integration and a delivered Application engine WL_REPLICATE for triggerring the Messa