.Mac sync does not function, conflicts inaccessible

UpGrade and found it valuable, BUT using my .mac accout I get some sync conflicts and when I open conflict solving, there is no window and solving conflicts is inaccessible - simply no way to get to the conflicts. Where is the window gone?

Never found out why.

Similar Messages

Bravia Sync does not work with Sony Bravia XBR-55X900B and BDV-N8100W Bluray 3D Home Theatre System.

Bravia Sync does not function with my Sony Bravia XBR-55X900B and Sony BDV-N8100W Bluray 3D Home Theatre System. The Sony Bravia XBR-55X900B does not list the Sony BDV-N8100W on the Bravia Sync device list. Does anyone have an explanation or solution for this?

Please use a component cable. With either RCA or optical for audio. That is the quickest fix. For current HDMI issues.
1.7 upgrade has been known to fix most of the HDMI issues. Verizon is working diligently to roll out img 1.7.
Javier
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

I had just upgraded my OS to the OS X Mavericks. After doing so, I noticed that my MS Outlook for Mac 2011 does not sync with the calendar/contacts/notes, thus, also not sync these info with my iPhone4s anymore. Please help, thank you.

Dear Sirs,
I had just upgraded my OS to the OS X Mavericks. After doing so, I noticed the following changes:
1) My MS Outlook for Mac 2011 does not sync with my Mac book's calendar/contacts/notes.
2) My iPhone4s does not sync with my Mac book's calendar/contacts/notes anymore.
Please help, thank you.
aawwii

Correct, USB local sync was taken away from iphones and ipads with 10.9.1 and 2. We are not allowed to speculate on rumours it might come back in 10.9.3 plus new iTunes. Either wait and see or explore Syncmate 5 beta free trial.
icloud still works.
Cant help with the Outlook problem.

Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed latest version of Tuxera NTFS for Mac.

I purchased a 3TB HDD (WD USB 3.0 $100) to replace the 2TB Seagate for a new Time Machine HDD. The 2B was full and backups were deleting older files. The 3TB was formatted NTFS and I want to "recover" the included SW before I reformatted the HDD for the iMac. I discovered that MacFuse was out of date and unsupported and my NTFS-32 was also out of date so I uninstalled both and then installed the most recent version of Tuxera NTFS for Mac. I rebooted and discovered that the FW800 port was unresponsive. Below is the EtreCheck report:
Problem description:
Firewire does not function after uninstalling macfuse and an out of date version of NTFS32 and then installed Tuxera NTFS for Mac.
EtreCheck version: 2.0.8 (95)
Report generated October 30, 2014 7:11:17 PM EDT
Hardware Information: ℹ️
iMac (24-inch Mid 2007) (Verified)
iMac - model: iMac7,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
2 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI,RadeonHD2600 - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 0:17:34
Disk Information: ℹ️
WDC WD5000AAKS-40TMA0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
ML 10.8 (disk0s2) / [Startup]: 499.25 GB (20.92 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Hardware Monitor ƒ/HardwareMonitor.app
[loaded] com.bresink.driver.BRESINKx86Monitoring (7.0) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18615.948847) Support
[not loaded] com.parallels.kext.hypervisor (8.0 18615.948847) Support
[not loaded] com.parallels.kext.netbridge (8.0 18615.948847) Support
[not loaded] com.parallels.kext.usbconnect (8.0 18615.948847) Support
[not loaded] com.parallels.kext.vnic (8.0 18615.948847) Support
/Applications/Toast Titanium v11.1/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) Support
/Applications/Toast Titanium/Toast Titanium v11.1 (1072).app
[not loaded] com.roxio.TDIXController (2.0) Support
/Library/Application Support/Symantec/AntiVirus
[loaded] com.symantec.kext.SymAPComm (12.2f1 - SDK 10.6) Support
/System/Library/Extensions
[loaded] com.Logitech.Control Center.HID Driver (3.9.0 - SDK 10.6) Support
[loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) Support
[not loaded] com.hzsystems.driver.CDSDAudioCaptureSupport (1.5) Support
[not loaded] com.increw.kext.speedit (0.32) Support
[loaded] com.logitech.manager.kernel.driver (4.10.0 - SDK 10.8) Support
[not loaded] com.olympus.CamBlockCommandsDevice (2.0.0) Support
[not loaded] com.olympus.CamBlockCommandsDeviceUP (2.0.0) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) Support
[loaded] com.symantec.kext.internetSecurity (5.2f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ips (3.5f1 - SDK 10.6) Support
[loaded] com.symantec.kext.ndcengine (1.0f1 - SDK 10.6) Support
[loaded] com.taoeffect.ispy.kext (2.0.2 - SDK 10.2) Support
/System/Library/Extensions/OlympusDSCDriver.kext/Contents/PlugIns
[not loaded] com.olympus.CamFWSerialBusProtocolTransport (2.0.0) Support
[not loaded] com.olympus.CamUSBMassStorageClass (2.0.0) Support
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) Support
/Users/[redacted]/Downloads/LCC Installer.app
[not loaded] com.Logitech.Unifying.HID Driver (1.3.1 - SDK 10.8) Support
Startup Items: ℹ️
TuxeraNTFSUnmountHelper: Path: /Library/StartupItems/TuxeraNTFSUnmountHelper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.canon.MFManager.plist Support
[not loaded] com.cooliris.SetLaunchArch.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[running] com.logitech.manager.daemon.plist Support
[running] com.micromat.TechToolProAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.seagate.SeagateStorageGauge.plist Support
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[running] com.eltima.ElmediaPlayer.daemon.plist Support
[loaded] com.embraceware.awaken.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.micromat.TechToolProDaemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[loaded] com.symantec.liveupdate.daemon.ondemand.plist Support
[failed] com.symantec.liveupdate.daemon.plist Support
[not loaded] com.symantec.sep.migratesettings.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.taoeffect.ispyd.plist Support
[running] com.wdc.drivemanagerservice.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.prosofteng.DGMonitor.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.taoeffect.EspionageHelper.plist Support
User Login Items: ℹ️
Speedy Mac Application (/Applications/Speedy Mac/Speedy Mac.app)
AwakenHelper Application (/Users/[redacted]/Library/Application Support/Awaken/AwakenHelper.app)
GetBackupAgent Application (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
WDDriveUtilityHelper Application (/Users/[redacted]/Downloads/WD/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
ClustersHelper Application (/Library/PreferencePanes/Clusters.prefPane/Contents/Resources/ClustersHelper.a pp)
RealPlayer Downloader Agent Application (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
SAVDiskMountNotify UNKNOWN (missing value)
ScanNotification UNKNOWN (missing value)
Launch Nikon Message Center 2 Application (/Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 9.4.6 Support
Unity Web Player: Version: UnityPlayer version 3.5.3f3 - SDK 10.6 Support
NPVirtools: Version: 4.0 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.6.8r638 Support
QuickTime Plugin: Version: 7.7.1
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
GarminGpsControl: Version: 2.9.3.0 Release Support
ToontownBundleManager: Version: (null) Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
OVSHelper: Version: 1.0 Support
CoolirisWebKitPlugin: Version: (null) Support
Google Earth Web Plug-in: Version: 6.1 Support
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
User Internet Plug-ins: ℹ️
BrowserPlus_2.9.2: Version: 2.9.2 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
DivX HiQ
Aimersoft Video Converter
3rd Party Preference Panes: ℹ️
BrowserPlus Support
Clusters Support
Déjà Vu Support
Flash Player Support
Flip4Mac WMV Support
Java Support
Logitech Control Center Support
Logi Preference Manager Support
MenuMeters Support
Perian Support
Symantec QuickMenu Support
TechTool Protection Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
iMac TimeMachine [Local]
Total size: 2 TB
Total number of backups: 80
Oldest backup: 2011-09-18 05:21:33 +0000
Last backup: 2014-10-05 20:18:55 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 0 B X 3)
/sbin excluded from backup!
/usr excluded from backup!
/System excluded from backup!
/bin excluded from backup!
/private excluded from backup!
/Library excluded from backup!
/Applications excluded from backup!
Top Processes by CPU: ℹ️
      2% WindowServer
      0% Speedy
      0% SystemUIServer
      0% RealPlayer Downloader Agent
      0% ps
Top Processes by Memory: ℹ️
288 MB SymDaemon
150 MB Speedy
137 MB Safari
82 MB WebProcess
82 MB coreservicesd
Virtual Memory Information: ℹ️
2.17 GB Free RAM
1.46 GB Active RAM
148 MB Inactive RAM
518 MB Wired RAM
388 MB Page-ins
0 B Page-outs
I hope someone has some ideas! TIA.

Do you have another cable you can test with? Do you have access to another computer with Firewire you can test with?
FireWire Device not Working
FireWire/USB - Quick Assist

"Finder" does not function after installing Leopard on Mac G5

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

After successfully installing Leopard on my (new) MacBook Pro and on my (old:2003) iMac PowerMac 6,1 I tried installing Leopard on my 2005 iMac G5.
The installation seemed successful, but after restarting the computer I was asked to choose the wireless network from a list. This was not possible. I do not use the Airport on this computer so tried to press "cancel". Could not do this and got the turning rainbow circle which never stopped.
*The Finder does not function and cannot be restarted. This seems to be the main problem.
I cannot log off or shut down and have to use the powerbutton to shut down.
When starting up I do not get the Startup sound. Do get login and can login. But, all my desktop buttons have disappeared and I immediately get a notice that OS X shut down unexpectedly, asking me to cancel or send a report. Neither of these options are possible and the turning rainbow reappears. It's driving me crazy!
I can sometimes open programs but no longer "system preferences".
Is there anybody out there who can help me??
I am especially frustrated since the other two installations on an older and on a newer Mac went well. I use the exact same programs on all three computers.
HELP!

I have upgraded my MAC OS to 10.6.8. FCP 5.0 still runs great, but Soundtrack Pro 1.01 opens, but operates at a glacial pace. It does not functionally operate. What can be done to remedy this?

I have upgraded my MAC OS to 10.6.8.
Final Cut Pro 5.0 still runs great, but Soundtrack Pro 1.01 opens, but operates at a glacial pace. It does not functionally operate.
What can be done to remedy this?

Depending on the configuration of the computer hardware and software
you may need to consider upgrade the RAM by installing more capacity.
Also, in the same vane, choose to consider upgrade the hard drive to
one of faster transfer, such as SSD, hybrid, or fusion; if not already at
least 7200-RPM and not too full of saved content.
Since no information is given about the model build configuration of Mac
there may be other suggestions to make it work better. Usually an OS X
upgrade requires one to look at the hardware resources available to it.
The OS X works best with more memory: new higher capacity chips.
This may be possible, and they should be high quality from reputable
vender who has tested them on Apple in OS X, such as OWC or Crucial.
Good luck & happy computing!

In my newly purchased MacBook Air, Dropbox does not function properly. It asks for Mac OS Password for my computer which I do not have.

In my newly purchased MacBook Air, Dropbox does not function properly (it shows MS Word, Excell and Power Point docs but not pictures). It asks for Mac OS Password for my computer which I do not have. How should I get this password ?

If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

10.4.4 Mac Help does not work

I just upgraded 10.4.3 to 10.4.4. Now Tiger Mac help does not work. Other software help does work, at least those I have checked like Word, Safari, and a few others I have checked. But in the Finder going to help in the Menu bar does brings up the help window, but try to click a link like What's new in Tiger or typing a query into the search window produces nothing. All the software seems to be working fine, at least what I have checked. I have redownloaded and re-installed making sure virus software is off to no avail.
Any help would be appreciated.

I tried the steps mentioned before, and thought I would give them one more try. Initially, I had success in that the Help Viewer opened to the default Mac Help view, and when I typed in a find term, lo & behold a list of results appeared! Alas, my visions of success vanished when I clicked on one of the results, then View.....nothing happened!
I returned to the main menu, and found none of the links would work, and neither would the search function!
It appears a link may work the first time, but none after that.
I also noticed that (repeating the Cache & Preference removal steps) that they repopulated with the files when Mac Help was initiated, and, as before, would allow one link acivation to occur, but none after.
I suspect there may be a conflict with some other applications Help feature, but made sure to activate ONLY the Mac Help with no other Application having been run after restart. The only other possiblity is that some toolbar non-Mac OS X help apps like Magic Menu, Quicken, & iPod conflict, but these are all I have!
If any one having this Help Viewer problem has similar installations, or knows of any conflicts with these; or, how I can temporarily disable/remove the associated help without uninstalling them, please post a reply.
Powerbook G4 (17") Mac OS X (10.4.4)

When I try to create a new Message on my Mac, Messages does not bring up my Contacts

I have followed the instructions to setup Messages, I can send messages to the email addresses that I have memorized, but when I try to create a new Message on my Mac, Messages does not bring up my Contacts when I type in the search field for a person that has an iPad or iPhone.
This sems out of sorts for an Apple product. Their stuff normally just works.
For some reason, My Mac Mini with Mountain Lion doesn't recognize my contact names, or it isn't synched with my contacts...
Anybody else want to weigh in, please?
Thank you!

Hi,
I would point out that I did say...
Of course the Contacts List has to have people listed in it.
The Error seems to be that you have not even got an My Card.
The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
Of course not everyone sets things up this way.
Anyhow
To Check the Contacts List open the app.
Go to the Preferences.
Go to the Accounts section.
This should list at least two "accounts
One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
Uploaded with Skitch!
7:36 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
Why does syncing iCal need Safari Safe Browsing Data? How can I turn this off?

See:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
"Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

Status bar missing in Firefox 6.0, also Real player does not function with updated version, had to switch back to 3.6

I've installed Firefox 6.0 about 3 times and each time I noticed that the status bar at the bottom of the page was missing. I relied upon the Norton Security "lock icon" which in version 3.6 would appear in the lower right hand corner of the status bar before signing in to websites or making transactions and found it very helpful. It was present in version 3.6 but not in 6.0. When I went back to 3.6 I suddenly had problems with the page freezing up so returned to 6.0 which corrected the problem but was not comfortable without the icon. I contacted Norton and via remote access the tech determined that the problem exists with Firefox's 6.0 version so he reinstalled 3.6 for me. Also I have a paid subscription to Real player Plus and it does not function with 6.0. I'm concerned because it seems you will soon phase out 3.6 and I will be without these functions which are important to me.

I have a solution! Follow this link and download the older version. When I installed it, everything came back as it was before! Yay! Good luck to you all. And bad move, Mozilla, in not making it clearer what the system requirements were for the update!!!!
http://www.macupdate.com/app/mac/10700/firefox

HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen. Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.

This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

How do I remove music from my iphone 5? Un-checking and syncing does not work.

How do I remove music from my iphone 5? Un-checking and syncing does not work.

Hello mail4bru,
I read your post, and it sounds as though you'd like to learn more about iTunes syncing. I have linked to an article that will instruct you on that:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12113
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Firefox Sync does not appear in my preferences

I want to transfer my bookmarks to a new computer. Firefox Sync does not appear in my preferences

Firefox 4 and later require a Mac with an Intel processor and OS X 10.6 (Firefox 16 runs on OS X 10.5).
*http://www.mozilla.org/firefox/18.0/system-requirements/
For an unofficial Firefox 17.0.2 ESR compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1702
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/QuickTimeEnabler
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

.Mac sync does not function, conflicts inaccessible

Similar Messages

Maybe you are looking for