Mac Sync Software Access not available.

I keep getting an access denied message from the download site. I am doing something wrong or is the software not available?
Are other people having the same issue?
Thanks
Jaime

http://na.blackberry.com/eng/services/desktop/mac.jsp scroll down to bottom where it says, in blue letters, Download PocketMac for Blackberry. My friend has a Mac, and I sent him this link, and it worked. He has the older Nextel Blackberry. Hope this is what you needed. Good Luck!

Similar Messages

I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

Cloud for Customer 1405 Studio software is not available in Service market place.!

Hi All,
Cloud for customer 1405 studio software is not available in the service market place. Can any one know's from where we can download the 1405 studio software.??
Regards,
Mani

Mani,
The links will be updated soon with the 1405 version of the studio along with the release to market of the generic Cloud for Customer solution offering.
I will update you as soon as the version goes live on the SMP via this thread.
You may use the following link to access the studio with its versions on the SMP.
Thank you.

Software updates not available

I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
Anyone have this issue?... Is there any procedure for this?
Thanks,
Al

Alanders wrote:
I downloaded the new IOS 7 via Wi-Fi
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Driver software is not available from Apple

Was using an HP LaserJet 1020 without any problems until last week, when it just gave out and it shows the following error every time: "driver software is not available from Apple". Have tried to install the latest drivers but it won't allow it with the same error.
Also tried following these instructions http://blog.jayway.com/2010/04/08/hp-laserjet-1020-in-snow-leopard/ but it gets stuck on the third step. The driver list can't be opened and it reads "driver software is not available from Apple" again.
Any suggestions?

From what I can tell from online research, HP never claimed the 1020 printer series was compatible with Macs or has ever developed any OS X drivers for them. For instance, from the "Specifications" tab of this product info page:
Because of that, I'm kind of amazed that you ever got your 1020 to work with any version of OS X, unless some sort of hack or third party driver was involved. If so, you might want to check with the originator of that workaround to see if there are any new developments that would get it working again.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

HT201263 my nephew made a new password and now cannot remember, he has tried several times but now the I Pad is disabled and he cannot try again for 22,980,298 minutes. The original computer it was synced to is not available. We just want to start over

my nephew made a new password and now cannot remember it. He has tried numerous times but now the I Pad is disabled and he cannot try again for 22,980,298 minutes. The original computer it was synced to is not available. We just want to sta

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hi Guys 'n' Gals! I have a problem with my computer going into 'Display Sleep' mode and it actually goes into full sleep mode. anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never go into computer sleep

Hi Guys 'n' Gals!
I have a problem with my computer not going into 'Display Sleep' mode but actually goes into full Computer Sleep mode. Anyone know how to keep my Mac running software and not go into full sleep after I have set it to 'Never' go into 'Computer Sleep' within the 'energy saving' section!
Any ideas guys?
Miffa!

Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.

My phone is saying "software update not available at this time" - is anyone else seeing this?

my phone is saying "software update not available at this time" - is anyone else seeing this?

With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

Windows support software is not available

I'm running MacOS 10.6.8 (Snow Leopard) on a 1st-generation Macbook (Core Duo, won't run Lion). When I tell Boot Camp Assistant to download the Windows support software, I get a message that "The Windows support software is not available." I do have the Snow Leopard install disc, but it (obviously) did not come with my computer so it seems like I should not use that option. How can/should I proceed?
Never mind, right after posting (despite previously searching for relevant discussions), I found my answer in a different thread. According to Fortunny, this is not required for Boot Camp 3.0.

Correct. The Windows support/driver software is on your OSx install disk unless you are running Lion. If running Lion you download the support software.

How can I deactivate a device from Sync, which is not available already?

How can I deactivate a device from Sync, which is not available already? It would be good to have a list of my synced devices.

'''To deactivate synced devices:'''
1. Open the Sync options window.
2. Click on Deactivate This Device. A prompt will appear.
3. Click Reset All Information to confirm. Your device's data will no longer be synced with the server's Sync data and you'll be logged out of your Sync account.
For more Information on Adding, renaming and deactivating your devices
please follow the link [https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account?esab=a&s=sync+devices&r=0&as=s#w_adding-renaming-and-deactivating-your-devices Managing Sync Devices]

Replaced dead hard drive reinstalled my mac 08 software will not restart for update

replaced dead hard drive reinstalled my mac 08 software will not restart for update

idk im not a computer tech im running on 08 software mac osx 10.5.2 ok now i replaced my hard drive ok now im trying to up date it goes to the agreement I agree and it tells me it has to shut down to download but instead of restarting it goes to download and and download stops half way can u help
what my prob is

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

Welcome to Apple Support Communities
I do not recommend you to download the Windows support software through Boot Camp Assistant.
Instead, you can download the Windows support software for most Macs from the Apple website. Go to this website, look for your MacBook Pro model and the Windows version you want to install, and follow its steps.
To install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

HP Laserjet Pro P1102w software update not available?

I recently purchased an HP LaserJet Pro P110w which advertises AirPrint capability. Apparently there is not specific OS X 10.8 support for this printer? My specific problem is that when i go to add the printer to my network, I get a box during setup that says "Software is available from Apple" it then attempts to download said software, but then I get a box that says Software Not available.
Any suggestions? I've seen some "solutions" involving this printer but I can't get any further than above. This occurs whether I attach it to my macbook pro via USB or to my Time Capsule.
It also has the latest firmware. In fact when I tried to use the enclosed CD, it says my printer has new firmware that what is available on the CD.
HP's website is useless, at least I can't find help.
I'm hoping that my fellow macophiles can help!
Thanks!

If you connect the printer to the network, you won't need to install any software. If you're connecting it via USB, follow these instructions:
OS X Mountain Lion: Reset the printing system

When I go to install OS X on the disk utility I got a prompt telling me that Mac 10.7 is not available. I am connected to the internet. What do I do in order to install OS?

My laptop was running slow while in the regular mode, but in safe mode it would work fine. I deleted all of the content through the disk utility. Once I would go back to the recovery mode prompt and click on install os I go to the next page and get a prompt that says mac os x 10.7 is not available. There also is no picture to the left of the OS system like most people have on their recovery mode screen on the install option. Please help!
Thanks!

cernstes wrote:
I was planning on buying one of those lens cleaners discs here soon and then see what happens.
That might do. There is the 'poor man's' alternative. Take a fine microfiber cloth (eyeglasses cleaning cloth) and wrap it around a business card. Insert it gently into the slot. Some times it works. Do not dismiss the possibility that the DVD drive is kaput.
I did purchase this laptop from my brother a couple years ago. He told me the first operating system that was on the laptop was OS X 10.6. He gave me the disc to install,
According to the information that I have, a Mid 2009 MBP came with Leopard (10.5). You will have to install Leopard (if you have the original disk) or purchase from the online store a Snow Leopard (10.6.3) retail disk.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
This disk is a requisite in order to install and run Lion (10.7) or any other newer OSX. You have to update Snow Leopard to 10.6.8 before downloading and installing Lion.
Ciao.

Mac Sync Software Access not available.

Similar Messages

Maybe you are looking for