Mac tethering:could not negotiate with Remote PPP Server error

My UMW190 Global USB Modem was working fine with my MacBook running OSX 10.5.8 -- until this week. Now I get this error, regardless of where I'm physically located:
"vzaccess could not negotiate connectioin with the remote ppp server"
.. I'm going out of town next week and need it urgently. Help!
Thank you,
RF

Remove the SIM card from the device. Place back in the Mac, Open VZAccess Manager and click on Detect Device. Then Options>Activation. This should help you a bit.
If not, then go to system preferences>Network and select the Pantech UMW190>Advanced>under WWAN Vendor: Apple Model: V32>OK>Apply>Connect.
Make sure that you remove the username and password stuff from those fields.
If the Apple/v32 doesn't work, try Vendor: Other Model: CDMA.
Let me know if I this works.

Similar Messages

SQL 2012 installation Error-The MOF compiler could not connect with the WMI server

Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.

Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil

Could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).

Hi
I am getting this error when trying to start a VM in a Windows 2008 R2 Hyper-V ( all updated applied )
'vm-xx' could not initialize machine remoting system. Error: 'Element not found.'(0x80070490).
Does anyone experienced this error?
I found one update, KB967902 but it is for Windows 2008 Hyper-V not for R2
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hello
Alessandro,
I wrote about this error in the following KB and blog post.
Please let me know if they are helpful.
Error 2912 when a Virtual Machine Manager 2008 operation fails due to a certificate issue: "Element not found (0x80070490)"
http://support.microsoft.com/kb/971264
http://blogs.technet.com/b/mbriggs/archive/2009/05/08/vmm-operation-fails-with-error-2912-0x80070490-due-to-a-certificate-issue.aspx
Best Regards, Mike Briggs [MSFT]
– Posting is provided "AS IS" with no warranties, and confers no rights

The MOF Compiler could not connect with the WMI server

I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.

Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

MS SQL Server 2008 not getting installed properly - MOF compiler could not connect with the WMI server

I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?

"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

"Could not connect to this SMTP server" error box.

I suspect this is common, but what do I do? I get an error box when I attempt to send outgoing mail from Mail. Connection Doctor tells me under smtp.mac.com:budsteetle "Could not connect to this SMTP server. Check your network connection and that you entered the correct information in the Account preferences." I have made not changes in my account, so this appears to be an Apple problem. I can send mail OK through MobileMe on my old .Mac account. Ideas? Usually, the Outbox empties eventually, so far it has been 1/2 a day.
thank you...

Hi Bud, and a warm welcome to the forums!
I saw this earlier, but hoped a Mail expert would drop by, or at least somebody that liked the dot mc service!
Might see this thread...
http://discussions.apple.com/thread.jspa?threadID=1359604
And if you can interpolate, this Leopard doc...
http://support.apple.com/kb/TS1307?viewlocale=en_US

HT204150 iCloud contacts, they won't save. I get a message stating that "Your changes to this contact could not be saved because of server error". What can I do?

Some of my edits of contacts in the iCloud contacts will not save. Instead, I get the message that "Your changes to this contact could not be saved because of a server error". Other, similar, edits are saving and synching to other Apple devices.
Thanks for help

Jeffeighmy - I had this same problem last week. I think it is an iCould issue. It resolved itself. Just frustrating. I had reinstalled iCloud Control Panel and it would not let me save contacts or calendars. Then it just happened after a couple of days of trying. My contacts on my iphone are now duplicated, not in Outlook. Then when I delete one on the iphone it deletes it up through icloud and my pc so I loose that contact. Go figure.
Mike

Your registration(s) could not be completed due to server error

I am getting this message when I try to register my downloaded Java 1.7 SDK. When completing the download originally, the registration process was aborted while I was reobtaining my username and resetting my password. Now when I go into C:\Program Files\Java\jdk1.7.0_10 and click on register.html, I get a page with the following:
Thank you for installing the Java Development Kit Version 7 Update 10 from Oracle Corporation.
Registering your product will give you the following benefits:
•Notification of new versions, patches, and updates
•Special offers on Oracle developer products, services and training
•Access to early releases and documentation
Product registration is FREE, quick and easy!
All you need is an Oracle.com account. If you don't already have one, you will be prompted to create one.
You need to be connected to the Internet to register this Oracle product.
There is a button on this page, Register My JDK. When I click it, I go to a page where I can either create a new account or use my existing account. When I check the box in the use my account box, accepting the conditions for use, and then click on Register Now, I get the above error. The URL of the page displaying the error is https://hs-ws1.oracle.com/RegistrationWeb/no_registration.jsp?error=invalid_user.
What is wrong?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

Getting "could not sign in...server error"

Trying to set up an ipod for a birthday present tomorrow but keep getting this message. I have a working Apple id etc. What can I do?
Help please!

I actually noticed when I had this problem just now that my iPhone 4 wasn't on wif. Only connected to 3G even though I entered my network info and clicked connect. So I backed up a few steps and re selected to connect to wifi and it fixed my issue!

VPN Issue: Could not Negotiate a connection with the remote PPP server

Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.

I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

Hi,
When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
Thanks,
Vinayak

Hi Ram,
we checked with network team and port 22 is open and they are able to ping to the target system.
we checked the seeburger logs and we see EOF received from remote site error:
Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
#at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
#at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
#at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source)
Thanks,
Vinayak.

What's wrong with this MySQL connection? "Could not create connection to database server"

I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out. It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea. The MySQL account has full priviledges.
Here is the message when I try to validate the data source:
Connection verification failed for data source: test
com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.
The root cause was that: com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException: Could not create connection to database server. Attempted reconnect 3 times. Giving up.

This happened on two servers. One one, the cause was that skip-networking was turned on. In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test. Even though I edited the data source in the CF administrator, it still didn't work (very misleading). When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
Has anyone else seen this problem with the case sensitive database names? And with the data source in CF not updating the case correctly? Seems like a bug in CF.

TS3683 I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

I have not been able to successfully back up my iPad to my MAC computer since 07/21/2013. I keep getting the error message "iTunes could not back up iPad "" because an error have occurred." Any suggestions on what I can do to resolve this error?

Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Mac tethering:could not negotiate with Remote PPP Server error

Similar Messages

Maybe you are looking for