Mac to mac sound on my mac hardly works

Hi, when using facetime mac to mac, the sound on my new macbook pro is bad. I can only hear parts of the conversation, which is annoying. How do I fix this? Elliot

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

Hi, my mac keeps on clicking spontaneously and touchpad hardly works. Cant get rid of it and cant do anything with my mac since it still clicks. Can you help me please?

Hi, my mac keeps on clicking all the time and the touchpad hardly works. Cant get rid of it. I am not able to do anything with my mac because it just clicks all the time. Can anyone help?

I am not sure what to do to help sorry but for temporary you could disable your trackpad and use a mouse then atleast your Mac is useable you can fix it

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

I suffer from the problem of cutting picture and sound when Link Mac Pro with the TV via the Apple TV Is there a solution to the problem

Have trouble cutting (the delay) picture and sound when Link Mac Book Pro with the TV via the Apple TV Is there a solution to the problem.
(this problem is when I follow films in the sites and forums or watch the live broadcast of certain programs by using the browser Safari)
I want a solution TV Apple made meI feel disappointed

Has anyone else encountered or solved this problem? Same thing is happening for me with a new MacBook Pro, 13" i7 and an Echo Audiofire 4. It's not even clear to me from searching if this is the processor idling or the firewire port hardware. Only thing clear to me from testing is that it does have something to do with using an audio interface - I don't get this noise plugging in my external hard drive, but I still hear it if I daisy-chain the hd through my interface. Any help or recommendations appreciated - do pc firewire ports have this issue too?

I just puchased a Mac Mini. I have to have a working web cam. The reviews I've been reading don't sound promising. How do I make it happen?

I just purchased a Mac Mini. I HAVE to have a working web cam. I've been reading web cam reviews and I haven't found one that has a Mac driver. It sounds like the performance on Macs are bad. 2 of the reviews are positive. If I understood it right, one guy made some settings changes on his comp. to make it work. I'm new to Macs and can hardly believe that Mackintosh hasn't produced a single portable web cam in all the years they've been in use.

Actually I'm pretty sure that Apple did produce a webcam, tho' it was some years ago. Most USB webcams should work fine. If you HAVE to have one, and know that it will work, then get an Apple Cinema Display or Thunderbolt Display - price tags are pretty hefty tho'!

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

Is it even possible to edit surround sound on a Mac Pro?!?!?!

Hello,
I've just been reading this thread:
http://discussions.apple.com/thread.jspa?messageID=2924869?
Which among many things discusses the fact that Mac Pros, even through an optical cable, are not capable of exporting live 5.1 audio - they can only playback already encoded 5.1 dolby audio from DVD's for example. Apparently the optical out is a purely stereo affair otherwise. I've finally received my Logitech 5450 speakers (took weeks and weeks) and hooked them up. They can indeed playback 5.1 from a DVD, which is splendid. However, one of the things I was most looking forward to was working on surround mixes in Soundtrack Pro. However, firstly STP doesn't want to convert stereo files into surround (like the video online showed), but only means that the surround panner pans between the two front speakers. (I know there's another thread about that, but the proposed solution of adjusting the collapse slider does nothing).
Secondly, and perhaps more confusingly, if I load an actual 5.1 file from the STP content, it still doesn't play in proper surround - the centre speaker kind of works and I think something's rumbling through the subwoofer, but both of the left speakers and right speakers are 'compressed' into the front one alone - nothing comes out of the rear speakers (they are perfectly connected I assure you!). In other words, f I move the puck in the surround panner so it's solely on the front right, and then over to the rear right, it's exactly the same (coming out the front).
I'm sure there must be a solution. Why would Apple advertise the ease with which one can now mix surround if the Mac Pro (I'm not exactly talking about a mac mini here) cannot export live 5.1?
Something which I'm sure is related, but which I can't solve, is that if I go into Audio MIDI setup in Utilities, and try and 'Configure Speakers', only two channels are recognised, and it won't let me select any of the multichannel options (such as 5.1, which is greyed out.)
Anyone know what I'm going on about? I'm totally lost - not really an audio person in general, but hoping to enrich my short films with some surround magic.
Any help greatly appreciated!
Steve
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

Typically 5.1 is mixed, and monitored on a 5.1 monitoring system, which means you need an audio interface and setup capable of outputting six channels of audio.
So of course the Mac Pro is capable, but not without additional multi-channel playback and monitoring hardware.
Encoded surround sound, which you hear on playback from things like a DVD, is entirely different story and the encoding is done at the end of the mixing/mastering process. Sometimes you will encode a mix in a variety of formats, Dolby Pro Logic, DTS etc.

Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3

When I call someone using FaceTime from my mac, they can see me but no hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro

When I call someone using FaceTime from my mac, they can see me but not hear me. Is there something I need to do to make this happen? I also have an iPad 2 and FaceTime works great on it if I call somebody. Why no sound from my mac FaceTime using a mac pro and isight camera, mike combo.
If I use google it works. If I use Ichat, it works. If I use skype it works.

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

Mac mini server: Hardware test error on Hard Drive

Mac mini server: Hardware test error on Hard Drive
'checking for slow read failures': ERROR - Target device access failure - Test failed.
CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
This is our trauma history:
- time machine got increasingly slower in writing a backup
- we quit the backup
- we switched off the mac mini (on power button)
- we switched on the mac mini
- we stopped time machine to the rules
- we shut down mac mini via command
- we booted the mac mini in save mode
- we see a loading bar
- no progress after 10th of loading bar
- switched off (power button)
- when we now switch on the loading bar below the apple-logo is all we see + the little wheel
- we started with cmd+alt+p+r pressed
- mac mini restarted but showed the loading bar scenario without progress again
- we started with 'd' pressed and did the hardware test (see above)
- we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
ANY IDEAS?
IS IT A SOFTWARE- OR HARDWARE ERROR?
THX IN ADVANCE!

BDAqua wrote:
I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
I'd get Temprature Monitor & see what temps they're running.
Is Temperature Monitor an app or a device? If it's a temperature problem then that is essentially a design problem. Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers. I think it would be foolish to waste any more money on these minis for my business hosting.

I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

I'm an avid Mac enthusiast who works in a creative field. However, I simply cannot afford a new Mac after my old one's internal hard drive failed. Can anyone recommend an affordable Mac option? I don't want to consider a non-Apple product.

Macs with a FireWire port will also boot happily from an External drive. You don't even need to open the MacBook.
Some users buy a drive they would like to have as a future Internal drive, and also buy an external enclosure. They get the External set up the way they want it, then swap with the Internal drive.

Over the last week, my external hard drive is not seen by mac, over the last week, my external hard drive is not seen by mac

My laptop is Macbook Pro and I used to use an external hard disk, which used to work fine with me. However, over the last week, the Mac system started not to recognize the hard disk and accordingly does not see it.
Any solutions / suggesions?
Regards

Did you test your external hd in another machine? did you test with another cable?
I don't know if its helps, but try to reset the PRAM.

Hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive?

hey, can i clone my Macbook Pro internal hard drive and then paste it all onto a formated external hard drive, then make the Mac use the external as the primary hard drive? please help for i only have around 618mb left out of 189GB!!!!!!!!!!!!!!!!

If what doesn't work?
If cloning your internal drive to the external drive is not successful, I expect CCC will tell you so. Assuming that doesn't happen, you will have a bootable replica of the internal drive on the external drive once CCC has finished.
You can then do any of several things:
1. Replace your internal drive with a much larger one (320GB or 500GB, or even larger), and clone the external drive's contents onto the new drive so you'll have all your data in one place. Note that if you do this, you'll also need to buy an external drive that's large enough to back the new internal drive up on.
2. Boot from the external drive as a temporary measure while you clear at least 30-40GB of data off the internal drive, allowing you to keep using it and saving small amounts of data to it. The external drive will then contain the only copies of the files you've deleted from the internal drive, so you'll need a seond external drive large enough to back both the other drives up on.
If you can't comfortably clear a minimum of 30GB off the internal drive, you really need a larger internal drive right now, and you shouldn't bother fooling around with the inadequate one you have — you'll just quickly overfill it again.
3. Replace the optical drive in your MBP with a large conventional hard drive, giving you two hard drives inside the machine. You will then need one or more external drives large enough to back up both of the internal drives.
If you sense a theme here — back up, back up, back up — you are correct. It's flat-out foolhardy to own or use a computer without maintaining complete, up-to-date backups of everything at all times.

Hdmi sound on my mac mini has stopped working after I upgraded the OS

I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Mac Pro boot sound on Cinema display

Hey guys,
Is it possible to run the Mac pro boot sound on my cinema display instead of the Mac pro's build in speakers?
My macbook sounds more agressive than that Mac badboy .
thanks!
-Sam

I think this has been a problem since the beige G3 and an early speaker-equipped Mac display.
The startup chime is produced long, long before the display is configured to accept the data and make it into speaker noises. It is near impossible to make the startup chime come out the display speakers.

Mac to mac sound on my mac hardly works

Similar Messages

Maybe you are looking for