Mac to PC computer-to-computer connection

I'm visiting my folks and I've established a wireless computer to computer network from my mac to their pc. It connected fine, however I cannot connect to the internet from my mac. The pc is connected to DSL via an ethernet line, and I selected to allow its internet to be shared by other computers. What can I do?

Hi Richard, Tiger doesn't do File Sharing, (computer to computer), and Internet Sharing very well together. I'm not quite sure how the PC handles it, but for Internet Sharing they will still have different Subnets.
Did you create this c2c on the PC or the Mac? Are you seeing shared docs on the PC?
The Mac may not be getting DNS either, so Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
What is the IP of the PC's Wireless and the IP of the Mac's Airport? Don't post the PC's outside/internet IP of the Ethernet connection.

Similar Messages

  • HT4061 My Ipad2 has a message Ipad disabled  connect to itunes.  The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with.  What can I do?  I cant even access the serial number to contact apple.  Help!

    My Ipad2 has a message: Ipad disabled  connect to itunes.  The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with.  What can I do?  I cant even access the serial number to contact apple.  Help!

    Call Apple anyway. If the device was ever registered with then they will have the serial # on file and can look you up by other info such as your name or phone number.
    To re-enable an iPad any computer with iTunes should work. However, if your data was not backed up to iCloud you will not be able to access it until you get back to your home computer.

  • My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down.  I have to re select the network when restarting or waking the computer up.  I think this just started with Lion.  My iPod and iPad  have no trouble.

    My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down.  I have to re select the network when re starting or waking up the computer.  I think this just started with LION.  My iPod and iPad have no problem remembering the wireless network.

    Thank you BGreg.  That is what I have been doing, and then it works just fine.  I think it was doing the same thing in the previous version of Lion.  I may be incorrect about that.  I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help.  Not so.  Thank you for letting me know it is a common problem.  I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts.  Nothing Improves.  It still can not find the internet when it wakes up or gets up.

  • My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

    When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
    Those tests determine whether:
    a) Your Mac software had stopped working  OR
    b) Only the display had stopped working
    If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
    If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
    ¿Software was still running?
    --Yes, the problem is ONLY in the display subsystem
    --No, this is a computer-wide problem such as a kernel panic

  • HT2844 My front headphone jack does not work when connecting a head phone to a new mac pro desktop computer.  The sound still comes from the speakers.  Any solutions?

    The front headphone jack on my new mac pro desktop computer does not transmit sound when connecting a headphone or ear buds.  The sound still comes from the speakers and is not redirected to the head phone.  The port has never worked.  Any solutions?

    okay, try option-clicking on the speaker icon on the top of your screen. That should bring up a list of sound output options. including headphone. You could try messing around with Audio MIDI. It may be possible that the thing is still stuck inside the headphone jack. Careful use of a toothpick may get it unstuck. I dunno, I've never had a problem with the headphone jack. If all else fails, call Apple or take 'er in for an appointment
    JB

  • I can not connect with pocket mac to my computer

    I can not connect with pocket mac to my computer

    I can not connect with pocket mac to my computer

  • Since upgrading to LionEvery time I wake the computer from sleep mode I have to wait several minutes until the computer connects to the Internet

    Since upgrading to LionEvery time I wake the computer from sleep mode I have to wait several minutes until the computer connects to the Internet

    I have found that Lion is slower to connect to WiFi when awakening than were previous Mac OS X versions.  However, the WiFi connection usually takes less than 15 seconds unless a Time Machine backup was interrupted when my computer was put to sleep.  When this happens and the computer awakens, the Time Machine backup attempts to continue prior to the WiFi connection having been made.  Until the Time Machine backup fails due to its inability to connect to my Time Capsule because of no WiFi connection, or I stop it manually, the WiFi connection will not occur.  So if Time Machine backups are on, you may be experiencing this bug which I have reported to Apple.

  • How can i restore my mac book pro computer

    how can i restore my mac book pro computer??an what am i doing b4 restore my computer??
    please remind me all the think i need to do,an i dont want to miss.
    thxxxx

    Welcome to the Apple Support Communities
    If you want to erase the disk, reinstall Mac OS X and your Mac didn't come with DVDs or you have OS X Mountain Lion or Lion:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X.
    If your Mac came with DVDs:
    1. Insert the OS X DVD that came with the Mac and press C key while your Mac is starting.
    2. Go to Utilities > Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X

  • 'No Computer Connection​' error message when saving memory card pics

    The printer is an HP Photosmart Premium C309g-m connected as a network device to an infrastructure communication mode wireless network.
    There are no problems printing documents.
    Documents have also been scanned and sent to specific computers on the network in the past.
    So it certainly seems that there is a computer connection.
    When a memory card holding pictures is inserted into the wireless printer and one tries to save the memory card pictures from the printer to a network computer without a memory card slot, one gets the error message, 'There is no computer connection'. 
    The Wireless Network Test Report Diagnostic Summary is all PASS with Very Good signal strength.
    The Diagnostic Utilities were useless to me. I can only guess at what the problem might be because it isn't specifically mentioned as a possibility.
    I tried turning the firewall off but it made no difference.
    The documentation mentions UDP Port 427 but doesn't state the protocol to be entered into the slot for Windows Firewall.
    There is a list of exception files but no detailed information on how to add them as exceptions into Windows Firewall.

    Try this basic troubleshooting fix:
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
    User/Home/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iDVD folder. 
    3 - launch IDVD and try again.
    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • How do I get 5.1 sound from iTunes on my computer connected to Bose T20?

    I have my computer connected to a Bose T20 with an HDMI cable. I can get surround sound with movies, but not with iTunes. I only get stereo instead of 5.1.
    I also have Apple TV connected to Bose and can get surround sound from iTunes when piped through Apple TV. Bose has told me to check the sound settings on my computer which I have done. The sound settings have 5.1 enabled.

    Hi there,
    You may find the article below helpful.
    Setting up iTunes and DVD Player for digital surround sound
    http://support.apple.com/kb/HT4072
    -Griff W.

  • I purchased a song on this Mac, an authorized computer. I am now getting a message that this computer is not authorized to play the song. Why??

    I purchased a song on this Mac, an authorized computer.  I am now getting a message that this computer is not authorized to play the song. When I provide my username and password to authorize my computer, the song is still not authorized. Why?

    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - http://support.apple.com/kb/ts1389.  If your country permits re-downloads, delete the file and re-download.

  • I loss the serial number for my Final Cut Pro. I just traid instaling before that upgrade my Mac G5 2004 Computer. Could anybody help me?.

    I loss the serial number for my Final Cut Pro. I just traid instaling before that upgrade my Mac G5 2004 Computer. Could anybody help me?.

    These are user forums. You are not speaking to Apple here. You may contact them:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.

  • How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?

    How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?
    Explanations with pics will be better.
    Thanks.

    Not sure what you are asking. A download is a download. what you do with the file afterwards is entirely up to you. If you mean to install Mac software on Win, then no, this can't be done. Furthermore you also would have to have a proper Win serial.
    Order an Adobe product platform swap or language swap
    Mylenium

  • AM300 + WRT54G: "Different Public IP for Diff Computer connected to Internet"

    Hi All,
    I have Modem AM300 + Wireless Router WRT54G.
    (Both have latest Firmware).
    Internet -> AM300 -> WRT54G -- two Computer with Wifi connection
    Scenario:
    1. I have two Computer Connected to Wifi at WRT54G and can browse Internet.
    2. I check both Intenet IP in http://whatsmyip.org, Both have same internet IP.
    Question:
    Can I have different Internet IP for each Computer?
    If Yes, How do I need to Set my Modem + Router?

    Hi dibbler,
    I would like to have different IP for Internet.
    Would you able to help me how to configure my AM300 + WRT54G?
    Current Setting:
    AM300 - Bridged ONLY, DHCP & NAT = Off
    WRT54G - DHCP = ON
    My Local IP is different for both computer,
    e.g. 192.168.2.2  and 192.168.2.3

  • Hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my

    hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my server works.  Could it be related to  "Network Preference & Monitor icons missing from my system preferences page?  and my guest sign=in account is now the main account??     thanks you. jb

    hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my server works.  Could it be related to  "Network Preference & Monitor icons missing from my system preferences page?  and my guest sign=in account is now the main account??     thanks you. jb

Maybe you are looking for

  • Help! about SQL Replication component

    We have a SQL2005(x64) Cluster, it is SAP's DB. the replication component not be installed at first. but now, we want to use SQL replication function to publish some table to a middle database.. the SQL2005 cluster parameter      VS=SQLTEST     Node1

  • Exclamation symbol

    Hi  Trying to get my head around my first Blackberry, I am getting a black message box on my home screen with a smaller black box with and exclamation sign and a blue OK button. What are these, and how do I stop them coming on? Kind regards Cessna So

  • NetBackup Oracle Agent and Oracle RAC

    Hi In normal oracle, i will just need to customise the template (hot_database_backup.sh) provided by the netbackup installation. Under the selection list, type in "hot_database_backup.sh" and it will work fine. For oracle rac, it seems not so straigh

  • Delete Database Automatically When Application Uninstalled

    Hi, I wrote one application which stores the Contact number as well their personal details.. every thing working well. To run my application i am using SunWTK2.5 Default Color Phone Emulator. I run my application successfully. To store the personal i

  • Popup translator?

    when I want to read a pdf, I convert it to microsoft office word just to use the popup translator, is ther a way to make a popup translator in adobe reader?