Mac to pc networking how?

how do you network with vista? my mac sees nothing in network yet filesharing etc is set good on the vista pc. 10.5.7 is shared and from vista i can't access downloads folder or anything else. only the first level of the hdd and i dont even have to log in to it from vista bvut i should.
a couple times the pc shows up on my mac and i can fully use it to transfer to and from. Yet when the pc or bac reboots the mac won't see the pc anymore.
i need to know how to change the name of the network to workgroup on the mac so it's the same as on my vista pc.

Enable NetBIOS over TCP/IP (it's disabled by default) and your PC's will show up in the Finder.
http://ecross.mvps.org/howto/netbt.htm

Similar Messages

I need to transition my 1st Generation Apple TV from an older instance of iTunes to a new instance of iTunes on my brand new Mac... How do I "switch" from one instance of iTunes to another? How do I get the 5 Digit Code Network to come back on my Screen?

I need to transition my 1st Generation Apple TV from an older instance of iTunes on my iBook to a new instance of iTunes on my new Mac... How do I get the 5 digit Network code to come back? Is there anyway for 1st Generation Apple TV to be synched to two instances of iTunes or do I have to choose one or the other? I appreciate any advice or suggestions. Thanks!

The 5 digit code is every time different. That does not matter. Just integrate every device into your network.
You can connect many computers to Apple TV but syncronisation works exactly with one computer. That's why I use "streaming". But you can sync one computer, then another, and so on. The content on your Apple TV is the content from your computer that has synced last. But you can not mix it.
The new Apple TV has no syncronisation. Everything is streamed,
Regards,
Torsten,
Germany

How do I share a folder on mac mini with other macs in the network?

Howdy all!
The scenario I have in mind is that I have one folder in our Mac Mini (used as Home Theater) with all the family's music files on it. The rest of the family would be able to access the folder and copy the music they prefer onto their own computers (iMacs and Macbooks). The other computers would have read only access, they would not be able to alter the contents of the original file (to prevent accidental deletion). Only the user of the Mini Home Theater could alter the contents of said file.
I have tried pulling up the "Get Info" window and clicking the "Shared Folder" and "Locked" boxes, but all this seems to do is make the user of the Mac Mini unable to alter the contents of the folder. All the other macs on the network can access and alter the folder contents no problem.
What am I missing?
Thank you for any advice you can give!

This isn't quite what I was looking for. I don't want to share the folder with users on the same computer--I want to share the folder with users on other computers.
Unless there is some way to identify users on other computers. How can I do that?

I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp.

I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp. does somebody can help ?

Google "upnp mac"

Connecting Mac book pro to power mac via wireless network

I've bought a mac book pro and am now trying to transfer some files from my old power mac to the mac book, yesterday all I did was turn file sharing on and use finder to connect to the mac book through network on the side bar.
Today I try the same thing and it says "The server may not exist or it is not operational at this time. Check the server name or IP address and try again."
I'm not interested in a work around I can probably find one myself, what I would like to know is where can I check what the power mac thinks the IP address of the mac book is? I can see the server name and that's right and I know the sharing options are the same as yesterday, Mac OS suggests you check these things but as I didn't set them and it found them on its own, where are they?
P.S. Why does it also offer me the option to "Fix Alias" for a network item when all that does is open finder for this computers so I can point it at something on the hard drive?
Message was edited by: John Cooper

John Cooper wrote:
I've bought a mac book pro and am now trying to transfer some files from my old power mac to the mac book, yesterday all I did was turn file sharing on and use finder to connect to the mac book through network on the side bar.
Today I try the same thing and it says "The server may not exist or it is not operational at this time. Check the server name or IP address and try again."
I'm not interested in a work around I can probably find one myself, what I would like to know is where can I check what the power mac thinks the IP address of the mac book is? I can see the server name and that's right and I know the sharing options are the same as yesterday, Mac OS suggests you check these things but as I didn't set them and it found them on its own, where are they?
I suspect that you are using DHCP to distribute ip addresses on you LAN and that the MBP has a different ip address today than it did yesterday. You can find the new ip in the Network pane of System Preferences on the MBP. I can't figure out how to find out what the client thinks the ip of the MBP is, though. ~/Library/Preferences/com.apple.finder.plist contains an entry for the last server connected to, for example, but it doesn't seem to include the ip. I deleted a bunch of obsolete files from ~/Library/Preferences/ByHost recently, though, which might have included this so you might look there.
P.S. Why does it also offer me the option to "Fix Alias" for a network item when all that does is open finder for this computers so I can point it at something on the hard drive?
No idea.
- cfr
Message was edited by: John Cooper

Can't connect Mac to Windows network drive

I am the only Mac in a PC college. I frequently have to connect to shared folders on the PC network. For six months I could "connect to server... cifs://name" with no problems. Last month, this suddenly stopped working (error = server may not exist). My office IT people told me to switch to smb://name and it worked again for at least a day. Now I can't get it to connect at all. The finder can see the PC server in the shared pane, but it won't connect to it. "Connect to server" won't connect either, no matter how I try. I get the "server may not exist" error, the "volume won't mount" error, or the "not all data is readable" error. The local IT people say they haven't changed anything and all the Windows people are fine. As the lone Mac user, I don't think much help is forthcoming from IT here. I don't know much about this sort of thing, so any suggestions would be most appreciated.
I do not know if the problem coincides with the update to 10.5.6 or not.

Karen –
Unfortunately I think that 10.5.6 broke several aspects of MS Windows support. If you were to GOOGLE ‘can’t connect to windows shares with os x 10.5.6’ you will find plenty. I personally have not upgraded to 10.5.6 because of it. Though not the best method you may want to consider using the IP address of the system you are connecting to.
smb://xxx.xxx.xxx.xxx/<share name>
Obviously I know that this is easier than said especially if you are the only Mac on the network, I am sure the College IT group is just going to fall on their swords to help you with this or even providing you this information. With that said you may be able to get the IP by trying to ‘PING’ the server’s name. To do this open a Terminal session on your Mac and type the following at the prompt:
ping <server name>
You should get a something like this:
PING <server name> (xxx.xxx.xxx.xxx.xxx): 56 data bytes
Now let me caution you, I am sure that the college has turned of PING reply on their network you will most likely get the line above and that is it. Also depending how aggressively they monitor their network for such activities you may show up on some report. Given that I would suggest that if possible you find someone in the IT group that is somewhat sympathetic to your problem and let them know what you are attempting to do.
Not the best answer but I know that using the IP instead of the server name seems to work.
Best of luck.
BH

New Mac Mini Server Network Issue

I recently purchased the new Mac Mini Server with 10.6 to use as a Content Filter/Web Server for a small private school. While trying to set it up, using the on board ethernet and a USB to Ethernet adapter, I have lost all ability to acquire an IP. IT does not matter if I use the on board ethernet, the USB adapter, or the Airport. All three return a self-assigned IP. I know this is related to the machine since I can still access the cable modem setup by typing in 192.168.100.1. And I brought it home to work on it a little more and the bonjour services are detecting the other macs on the network.
I tried trashing my network preference plist, but no change.
I am considering doing a fresh install since I think the initial setup was borked. But I thought I'd hit up the board and see if anyone else had a thought before I begin that process.
thoughts?

I have setup this configuration several times with both a MacPro and the smaller mini setup. The gateway setup we are describing is about as simple as it gets (static IP, gateway running all services so 1 IP address, gateway set as 192.168.1.1 on the local net. Simple DHCP and DNS "server.local", and "server.xxx.com" external).
I would be overjoyed to find that I can configure this by setting up some simple overrides in the routing. I would point out in defense that _everything else_ works perfectly basically by default.
1) dns on server: local and external, forward and reverse from itself and the local network - check
2) services on server (all of them): from itself and the local and external networks - check
3) network access (ie NAT & Firewall) for local machines - check (web, streaming, even bittorrent)
The only issue I see is that remote clients cannot access the gateway itself properly though VPN. UPD return packets seem to be mis-routed through the physical interface rather than the virtual one.
ALL other operations (Mail, iCal, iChat, Push, Web Services, Wiki, Web Mail and iCal, NAT) work perfectly for the server, local network, and external hosts. The above problem only happens for vpn clients, and then only for connections from them to the gateway itself, and only for UDP packets.
I would really love to know how to fix it, especially if this can be explained by a needed custom rule (But I'm guessing not given the otherwise full functioning system). Are you saying that to make VPN work you need to add custom routing info that is not described in the Server docs? If so what?
Thanks,
Hunter

G4 freezes while connecting to another Mac over the network

This is a mirror-drive, Dual 1GHz PowerPC G4, 1.25 GB RAM. It was recently repurposed as a hand-me-down when we upgraded. We cleaned it up and reinstalled everything. It connects to the internet just fine. Other computers can find it on the network and connect to it just fine. When I try to connect from this G4 to any other Mac on the network, I can find the other computers and I get the login popup, but when I put in the password and click OK, I get the color-wheel that never goes away. I have to power it off and try again.
This computer has been a work-horse for several years and has been on our network with no problems. This has just popped up since we moved it to a different desk.
One side note, we did upgrade our network recently, but none of the other Macs (including 2 other G4's) are having this problem.
thoughts? suggestions?
thanks.

What version of the Mac OS is the MDD running?
This has just popped up since we moved it to a different desk.
If that involved unplugging the computer from the wall, then a dead or weak PRAM battery may have let the computer lose something that it needs for the task. How old is the battery and how much time has the G4 spent off wall power in the last few years? If your firm requires unplugging computers at night (some do now in an effort to be more "green"), then the battery is surely dead by now.

When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open.

When i updated my computer, my safari on applications wont open and says "safari quit unexpectedly" and wont open but when i open it on the application key on the mac, safari will open. how do i get safari back on my dock where it will open. when i click reopen it wont. but i know safari works because thats what im using right now. it just wont open when i click the one i had loaded on my dock and in applications. please help!
Stephanie

Drag the Safari icon straight up and off the Dock so it goes, "poof" ...
Now click and hold the Safari app in the Applications folder and drag that to the Dock.
See if you can open a webpage in Safari.

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

How do I find out what my PW is on my Mac or at least how to reset it?

I reset my password for internet site but i must have a different pw on my Mac, it will not let me do updates without it* The PW hint in the sign in screen is not working. How do I find out what my PW is on my Mac or at least how to reset it?
thanks,
sticksrrll.

Sounds like you want your administrative password on the Mac so can install? For starters, you'll want to ask in a Mac forum. I know you used to be able to reset it using the install disk but haven't tried that for years.

I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris

Hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac?

hi i have the same apple id for my iPad and my mac. my iPhone has a different one. My i cloud on my mac seems to be the iCloud on my iPad, if that makes sense so its not sending my photos from my mac to the cloud. how do i change it to upload mac pictures instead? thanks

Did you go into Settings > Store and then tap your old ID, sign out and then enter your new ID?

I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?

Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W.

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.

This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141

Mac to pc networking how?

Similar Messages

Maybe you are looking for