Mac Tower Pro 10.8.5 keeps going into sleep mode

Purchased from Apple, refurbished 2012 Mac Tower Pro. At the same time, purchased a new Dell U2713HM, 27" monitor.
Have been operating on this new system since about the first week of December 2013.
Issue:
The computer has constantly gone into sleep mode after a few minutes of no activity. I can have iTunes radio playing, but the system still goes into sleep mode. As I am typing and moving the curser, the machine stays awake.
This has caused much frustration because when it goes into auto sleep mode, it quits all programs that I am in, and when it does this, I lose all the work I had accomplished. It litterally closes everything and goes to sleep in about 2-3 minutes of no activity.
BTW: the computer and monitor have all its new OEM cables that came in the box, when I purchased the units.
Solutions attempted:
System Preferences — Energy Saver: computer sleep and display sleep set to "never" and unclicked the box "Put hard disks to sleep when possible."
Dell settings: Turned off all energy savers.
Results:
Nothing. Problem persists.

I apologize for the angst. The problem has cost too much money in lost time and material because when it would automatically shut down after a few minutes, all my work was lost.
I misunderstood the terms of the warranty. Thank you for your input and patience. Much appreciated. For the benefit of others that experience this with a new Mac that auto shuts down. Check the following:
1. Go to System Preferences.
2. Click on Security and Privacy.
3. Click on Advanced (bottom right corner)
4. If the first line is checked (Log out after 5 minutes of inactivity); uncheck it and then click OK button.
5. Be sure to click the lock before existing Security and Privacy.
Now the machine will cease shutting down programs to go into sleep mode as soon as machine is inactive for a few minutes.

Similar Messages

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?

This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock

HP pavillion Elite HPE-541F ... system will not start and monitor keeps going into sleep mode

Good Morning:
Having an issue with my Hp Pavilion Elite HPE-541F and Monitor HP2311x
Yesterday, thinking I was updating Java ... clicked on it and agreed to things being allowed on computer ... started adding icons to my desktop .... then pop ups kept coming up to register etc ... I assumed that something was wrong so I attempted to restore system to previous ... since then my system will not boot up ... will say "starting windows" and I can hear the fans working but thats it ... second part of the issue is that the monitor keeps going to sleep, so even if I try to restart the computer in "safe" mode or anything else monitor goes to sleep and there's nothing on the screen so don't know if anything is doing anything .... Very sorry I'm also not very tech savy with computers ... just trying to save time and money before I have to bring system to computer repair person .... Any help would be appreciated .... Thanks so very much

I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271
and for the monitor:
http://h30499.www3.hp.com/t5/Monitors-Experts-Online-Now/bd-p/bsc-1255
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Mac Pro randomly goes into sleep mode

My (mid 2010) Mac Pro, OS X.6.8, randomly goes into sleep mode and I can't wake it, have to power it off and reboot. Just started to the best of my knowledge Friday (Jan 6, 2012) I've had it happen surfing the web in Safari, while working on an illustration in Adobe Illustrator, while running Apple Hardware Test, using 23" LCD connected by HDMI and DVI-D, Disconnected monitor and connected 12" Cintiq (LCD Tablet).
The monitor goes black, says "there's no signal coming from your computer", none of the keys will wake it. I have to hold down the power button until it turns off then power it back up. The time between the sleeps varies, 38min, 1hr 34min, 5min, 2hr 17min, 12min, etc. I disconnected everything (except keyboard, mouse, monitor) still the same. Opened and removed the ATI Radeon HD 5870, and noticed the PRAM battery, replaced it with a new one, thought that fixed it, worked for a long time then it happened again.
Tried Apple Hardware Tester again, it said everything is fine, ran it again an error popped up: 4SNS/1/40000000:Te1S-99.364, wrote it down then it slept.

The next time this happens open your mac and see if there is still a fan running. If so you are not sleeping, you are in a thermal cutoff. Keep you mac cover off.
Now reboot as you always do. Take a look at the fan in your 5870. Is it spinning? If so, try to keep an eye on it and see if you can "catch" it not spinning.
When the fan doesn't start, or if it does then stops, the card will overheat and the machine will go into thermal cutoff. The amount of time is variable.
I speak from experience. I am currently on my third 5870 video card. Both the previous two had this fan problem. The only wrinkle in my theory for you is that I wouldn't expect more that, say, 15 minutes of up time at the most, not hours like you got. But it may be that your card is starting ok, but stops sometime later. I chalk it up to the lousy fans Nvidia uses in the 5x70 cards.
FWIW, if you happen to catch the fan stopped before the machine goes into thermal cutoff you can give it a little nudge with your finger to get it going again.
I recommend one of the various temperature monitors. I use iStat Menus and display some key temps in my menu bar. Of course after going through two of these cards I am a bit paranoid!
Some other temperature monitors:
iStat Pro
Temperature Monitor
Hardware Monitor
Note, after typing all this I also realized you got a AHT 4SNS error. I would run AHT again to see if you get that error again. If so that means "Check Main Logic Board" and you may have a more serious hardware problem than just a video card! So my other recommendation is that when you machine fails again look inside for any lit diagnostic leds. There's some near the dimms but there are others on the board as well.

Power Mac G4 MDD keeps going into sleep

My G4 has a strange sleep issue. I'll be working on my Mac for a good hour or so when fan starts doing an imitation of an F15 jet engine. This is then followed by screen & Mac going into sleep mode. I hit any key & comes out of sleep momentarily then goes back to sleep. No matter how many times I hit keyboard it goes into sleep again. I finally have to shutdown which is tricky as often while trying to do so, will go into sleep mode. I've disconnected all USB/Firewire devices, ran Disk Utility/First Aid, reset PMU, PRAM & replaced battery. I've also taken out 2 x 512Mb additional Non Kingston RAM but didn't make any difference.I'm thinking it's got to be down to overheating/clocking as fan noisy & heat sink gets very hot. I've heard Tech Tool can elimainate these sort of problems & fix overclocking processor speed? I've looked at discussions but couldn't see anything that matched this ailment.
Any help/advice greatly appreciated

If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Try resetting the PRAM. This should reset the NVRAM on most machines, which is the suggested fix. If that didn't help, do the following manually;
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
reset-nvram
press the return key on your keyboard
set-defaults
press return
reset-all
press return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
If you have a storage device mounted via a PCI card that doesn't support sleep read this Apple doc. Thanks Texas MacMan!
Still didn't work? Might be time to call AppleCare or see an Apple Genius or a technician.
 Good Luck! DALE

HELP my ipod keeps going into restore mode

hi i have a problem with my ipod touch 2nd generation firmware 3.1.2. it keeps going into restore mode randomly when i play with ir or use it. i upgraded and downgrade and nothing seems to work. i think there is a problem with the hardware!
oh and when i bought it there was a problem with the headphone jack(brand new)
and nobody would help. i had warranty to. we live in a cruel world. =(

Yesh, take it to the Apple Store and make a fuss.

Late 2012 Mac mini with OSX 10.8.2 has started shutting down instead of going into sleep mode.

Sometime in the last week or so my mac mini has started going into full shut down instead of sleep mode.
I have tried checking and unchecking energy saver boxes but haven't found anything which will get me back to where I used to be - and I haven't knowingly changed anything to make this happen.- maybe an OS update caused it?
The machine will fire up with a tablet click rather than needing the reset button to be pushed so clearly the machine is sort of halfway between sleep and full 'off'. Most frustrating as one of the key issues for me in getting this my first mac was its easy sleep and super quick fire up compared to windows.
Any help appreciated
Oh yes I just remembered that I did just install 2 8gb of crucial RAM (to replace the supplied 2 2gb but surely that can't have anything to do with it - can it)?

Adding to my first post I can now advise that when the mac goes into sleep mode the light on the front stays on (it does not pulse so clearly it is not really sleeping).
When i click the tablet / keyboard this is actually what triggers the mac to reboot
I have tried resetting the SMC as per the following link to no avail
http://macs.about.com/od/usingyourmac/qt/Resetting-The-Smc-System-Management-Con troller-On-Your-Mac.htm
Help please!

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in

When the system goes into sleep mode it keeps making a beeping noise. The system is shut down by holding the button in
and will then boot up again without any errors.
I Have replace RAMS, Motherboard and Power Supply. I have check the Bio's and Power setting on the unit. there is no place to cause this issue.
Please help
PC Power Tech

Syamak,
You didn’t specify where the beeping noise is coming from.
If it’s coming through your speakers, you could try to update your audio drivers since it’s possible they’re incorrectly sending a signal to the speakers as the audio chipset enters standby.
If the noise is coming from the motherboard, you’ll need to take a closer look at your system’s configuration or contact the manufacturer.
I hope this helps.
Mike
Windows Outreach Team – IT Pro

HT4061 My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

My phone keeps going into recovery mode. I've had rest 5 times now. I was told I need a new phone. Any resolution??

Maybe you should consider that new phone recommendation you got...
Who told you that?
Is the phone jailbroken? Was it hacked to unlock it? Has it been physically damaged? Did you get it wet?
You haven't provided anywhere near enough information.

Mac goes into sleep mode amd doesnt come out!!!!!!!

Hi, new to this so sorry if this is a dum question. I have installed Snow Leopard on my IMac and Air. No prob on the Air but probs with the IMac. Everytime it goes into sleep mode I get a black blank screen and it wont come back up? have to reboot everytime or leave front row on with a slide show! any ideas welcome?

I looked around the internet and found an old post that seems to have solved the problem. I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared. I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

Early 2008 iMac (8,1) randomly goes into sleep mode

Hey,
My early 2008 iMac (8,1) on 10.8.2 goes into sleep mode by itself. I've played around in Energy Saver, tried resetting SMC, NVRAM, replaced HDD, reformatted HDD, installed smcFanControl, reinstalled Snow Leopard, Lion, Mountain Lion. None of that worked. Took it to the Genius bar, performed some diagnostics tests and they said everything worked properly. Does anybody have the same problem? I can still use the computer for general computer use (light web surfing and e-mailing), but it seems to go into sleep mode when I have a lot of applications open and especially when watching videos. I've tried researching this problem, but I've haven't found a definitive answer. Right now, the Genius that I've been talking to thinks it may be the RAM. I'm waiting on new shipments of test RAM to arrive at the Apple Store for him to properly diagnose.
Thanks,
Jason
iMac (8,1)
2.8 GHz Intel Core 2 Duo
2x2 GB 800 MHz DDR2 SDRAM
ATI Radeon HD 2600 Pro 256 MB
1TB 7200 RPM SATA ST1000DM003-1CH162
If you want to read the whole time line, I've included it here. I apologize for it being so long.
At first I was running Lion (10.7.5) and the computer would enter sleep mode whenever I was doing anything with video. For example, watching YouTube videos and chatting on FaceTime. And funny enough, I distinctly remember watching a bunch of movies with VLC and the computer did not go to sleep (Although, this is not true anymore). I could wake the computer up and use it, however within a few minutes the computer would re-enter sleep mode. The computer seemed fine and I could access all of my files. Tried resetting SMC and it did not resolve the issue.
I made a Genius appointment to see if they were familiar with the issue. The iMac passed the in-store diagnostics test; it said all the components were functioning properly. He told me to bring it home to do a fresh re-install of my OS and then run my computer to see if the problem persisted. I took it home and reformatted my HDD with a 35-pass erase, re-installed Snow Leopard (10.6.8) and declined to transfer any backups from Time Machine. I was using a fresh system and sure enough, the problem persited. Tried doing the same thing again but with Lion (10.7.5) and still no luck. So I made another appointment and it passed the in-store diagnostics test again. I let them keep the computer for a 24-hour diagnostics test. They told me they would diagnose my computer with the OS on my HDD as well as a copy of OS that the Apple store deemed 'good' on an external HDD. The Genius called me and told me that my HDD failed their 24-hour diagnostics test and recommended I replace it. I initially had a 750 GB HDD, and the Apple Store could only offer me a 500 GB HDD ($200). I opted to take my computer to Carbon Computing, an authorized dealer in Toronto, to have a 1 TB Seagate HDD ($170) installed with no OS on it. I brought it home, performed another 35-pass erase and installed Snow Leopard. Problem still persisted. Repeated with Lion, still unsuccessful. Looking back, I was so excited that I just had to replace the HDD to fix the problem, I forgot to ask the guy if he could recreate the issue.
I began to suspect that it was a heating issue. So I installed Temperature Monitor and smcFanControl, and cleaned the fans as much as I could without taking the computer apart. Without smcFC on I tried to recreate the problem and I noticed that the Power Supply Position 1 reached 95 degrees Celsius, and Graphics Processor Temperature Diode reached 97 degrees Celsius before entering sleep mode. I don't know much about temperature sensors and what they monitor specifically, and so I couldn't draw any conclusions from that data. I turned on smcFC and cranked the optical drive speed to 2000 RPM, HDD to 3000, and CPU to 3000. The computer still went to sleep but the temperatures were below 90 degrees Celsius before entering sleep mode. I've tried researching here and on the internet about normal operating temperature ranges of iMacs and generally found that most do reached that temperature but they do not go to sleep mode.
Then I thought it may be a problem with Lion so I upgraded to Mountain Lion. The issue still persisted. Tried resetting SMC and NVRAM, did not resolve issue.
I called the same Apple Store explaining to them that their recommendation of replacing the HDD did not resolve the issue. They told me to bring it in and have them check it out again. I went through the same process I did before; the iMac passed all of their diagnostic tests. The Genius told me this time he will test out the RAM. He called me and told me that he could replicate the problem and so he proceeded to put in a stick of 'good' Apple RAM, but the computer would not work. He said the 'good' Apple RAM was damaged, either before or in the process of putting it in. He plugged in my old stick of RAM and the computer worked. He tried to recreate the problem and claimed that the computer ran for over 24 hours with an existing movie on my HDD playing and it did not go to sleep mode. However, once I brought it home I played the same movie right away and it turned off 17 minutes into the movie. Tried resetting SMC and NVRAM again, ran the movie again, still went to sleep.
And that's the story for now...

Now to find out WHY it does it at home only. How hot is it at home? Have you checked the AC current/voltage at home?
Well they were able to replicate the issue at the Apple Store the second time I left my computer there. Anyway, we don't have any heating on at my house at the moment. It's usually from around 20-23 degrees Celsius (72-75 F). Temperature Monitor says ambient temperature is 30 degree C though...
I'm not really sure how to check the AC current/voltage at home, but my computer worked before I moved it. So I'm not sure if that is the issue.
I normally only have speakers set up to my computer and a wired keyboard. The speakers are powered separately. I would assume that at the Apple Store only the power cord and wired keyboard are connected.
What is the Power Supply Position? And what does it do?
Thanks for your help!

Continuously goes into sleep mode

my computer worked perfectly fine until the day in literally blew up from the logic board b.s. ... so i got it replaced probably like back in febuary and have nothing but problems since and when i bring in to apple they cant do jack about it.
my fans run excessivly and the computer will start to go into sleep mode after being on for maybe 30 mins and then just keep doing it right when i start it back up. has anyone else had this problem?!?!?!

I too am having the same problem with my G5 going into sleep mode, although I must be lucky because I get about ah hour out of it before it shuts down. The problem appeared after replacing a logic board with blown capacitors at an approved service center. Since then they have also replaced the power supply and it is in shop now getting it's third logic board?!*@#! I do have to admit though that apple has coverd the cost of all repairs so far in spite of expired warranty.
All those MAC commercials are driving me crazy... "Hi, I'm a mac. Hi, I'm a PC. Neither of us work, but at least it's fairly easy to fix a PC."
Is there a point dealing with apple through phone directly or is going through a service center just as good?
iMac Mac OS X (10.3.7)

MacBook goes into Sleep Mode w/o me telling it to

An iPod-like image pops onto my screen with "Zzzz" coming out of it. Then my computer goes into sleep mode.
This has happened a couple times. Once, I did not have it plugged in. The other time (just now), it was plugged in. Neither time was my battery even close to low power. Neither time did I come close to touching something that would put the Mac to sleep. I have checked my power settings, and they are all correct. For instance, I have the power/screen not shutting off when it is plugged in.
Any ideas???

Got the exact same problem here - I have it plugged into power and my on-power setting says "never sleep" and yet keeps trying to go to sleep (actually I think it is shutdown) when I leave it alone for a hour or two. Most of the time I have stuff running that it can't close automatically so I come back to a window full off dialogs asking for quit confirmation.
Very irritating - is my Mac just trying to be green? Is it somehow thinking its in battery mode? Is there some more obscure setting that will prevent this?
Or is it just a bug...

How can I select shutdown & close the display w/o going into sleep mode?

I have learned to wait untill the MBP full shuts down before closing the display. In the past I have pressed shutdown closed the display only to find out later the MBP goes into sleep mode before fully shuting down. When I reopen the display the computer finishes the shutdown process or worse the battery is dead.
I would like to select shut down, close the display and walk away while the computer completes the shutdown process.
Is there any setup options or apps. that will allow this?
Thanks, Joe
(new to the mac)
MBP Mac OS X (10.4.6)

Well hello there, and welcome to Macintosh.
Unfortunately you can't change anything to stop this from happening. The shutdwn process goes about its business killing processes and applications that have been running. The sleep process interrupts ALL business going on in the OS, and puts the machine into low power mode, as it is not aware of the nature of the running processes (in this case, the shutdown process), knowing only that they must be slept and the machine dropped into sleep mode. You gotta wait it out before you close the lid.
I would suggest sending a message in OS X feedback requesting this as a feature!
If you find this response helpful or if it solves your issue, please click the appropriate icon in the header of this reply.

Macbook spontaneously goes into sleep mode and screen off mode

Hi. My Macbook spontaneously goes into sleep mode and screen off mode with varying time between each instance. It usually goes for a few minutes or even hours without doing it and then will go through periods of fluctuation between the modes. I believe this to have started with a minor orange juice accident rather than it being anything software related.
Any ideas as to how I might rectify the problem? Thanks very much in advance,
Danny

When you say it goes into sleep mode ...do you mean you actually see the white pulsing light?
It may be that there is an application running (perhaps in the background) that is keeping your book awake. Printer software sometimes does this for example ...try logging out and seeing if it sleeps like that. If it does, then it very well may be a background process running.
You may find some items in System Preferences/Accounts/Login Items that may be the culprit.

Mac Tower Pro 10.8.5 keeps going into sleep mode

Similar Messages

Maybe you are looking for