Mac turns off after it loads?

Hi, I've tried to turn my mac on and the grey screen comes up along with the chime, the apple and the loading bar. However, once the loading bar has fully loaded it turns off! Any suggestions? I'm in a slight situation as it doesn't usually recognise the keyboard until the login page comes up and I don't have a recovery disk, any help would be appreciated..thank you

Go step by step.
http://support.apple.com/kb/TS1365
Note: Steps 5 and 6
Step5
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Reset SMC, hold the keys down for 20 seconds or more.
Keep it charging for 2 hours or more.
Best.

Similar Messages

  • My mac turned off after installing i os x lion

    turned off but still on just that the screen is black, its been 45 min since that had happen to me
    thank you!

    Hello toav,
    It sounds like you can hear that your MacBook Pro is on, but you do not see anything on the screen.  I definitely understand your concern with this.
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays, so you can skip any steps referring to an external display.  I recommend reviewing the full article, but this step specifically stands out to me:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    You can find the full article here:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • MY MAC TURNS OFF AFTER CONNECTING MY IPOD SHUFFLE

    Every time I connect my ipod shuffle to either my macbook pro or Imac, the computer shuts off.  Can anyone assist me with this issue?

    Hello bjc, 3418,
    It sounds like your iPod is causing any computer you plug it into to turn off unexpectedly. If you've already tried a different usb cable, I would reset the iPod and test it again. 
    Resetting iPod shuffle
    Then if the issue persists, it sounds to me like that will need service to fix this iPod:
    Apple - Support - Service Answer Center
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Mac air turning off after starting

    Mac air turning off after starting

    Hello
    Did you check the power saver settings?
    Push he first slider far to the right up to never so that your Mac Mini never stops.
    Also untick the suspend hard drive activity as soon as possible to avoid lag on your Minecraft server.
    Best wishes

  • Macbook Pro won't login after sleep (sleep with low battery -- mac turned off maybe it's called save sleep)

    Macbook Pro won't login after sleep (sleep with low battery --> mac turned off maybe it's called save sleep)
    So if I hit the powerbutton my mbp booted like it is booting from the save sleep (so very fast and the login screen is there in about 10 sec.and there is no apple logo while booting just the desktop screen in "unsharp" ore foggy however...)
    Then when i see the login (if the keyboard backlight turned on) i wand do tipe in my code but it won't work... the trackpad is not working; and when i plug-in a usb mouse the mbp is not powering on the usb-mouse (laser is off)
    Why is that this way?
    Is there n option to wake up the mbp fromm deep/save sleep without haveing issiues after that?
    THX

    Sorry for such a long delayed response...
    I was able to get to an apple store this past weekend, and let me tell you... I'm about finished with there great "support".
    Right before I went to the store, I tried to eject a disk. Well the cloth in the SuperDrive (I assume to protect the drive from dust and such) Pulled up with my disk. So I get the Apple store, describe my problem and what happened with the cloth piece. The "Genius" writes up a form and tells me they have to run diagnostic and it will take a couple days... and I will get a call when its done (1-3 days).
    Well on day number 3 I called up the store and they told me it was ready to be picked up? I asked if anything had been fixed and they told me they could not reproduce my "sleep issue", so they couldn't fix that.. but told me the cloth piece in the SuperDrive had been fixed.
    I drive an hour (one way) to the Apple store to find that all they did was PULLED OUT the cloth... they did not replace it! So basically I have a hole for a Super Drive.
    I asked why I was not called to say that my computer was ready to be picked up... didn't get an answer on that one.
    I asked why my SuperDrive was said to be fixed, when nothing was done... they told me that it would have to be sent out to the factory store for that to be fixed (FIRST TIME THEY MENTIONED THAT!) Oh, and that would take 5-7 business days. Well that's not going to happen right now considering I'm a college student that NEEDS a working computer!
    So I go home, angry... start just putting all my important documents back on the computer. And the screen starts blinking!!!! I guess now I have the same thing described in another post on these forms...
    Lets just say that I'm not very happy with Apple right now! If anybody else has success on either the sleep issue or the screen blinking issue, please let me know!
    Thank you!

  • My mac book pro is not "starting" it makes beeping noise when i turn it on, prior to this for half  day it was turning off after an houror so.

    my mac book pro is not "starting" it makes beeping noise when i turn it on, prior to this for half a day it was turning off after an hourr so.

    It may very well be a RAM issue but possibly something else.  Look over this extensive troubleshooting document for a possible solution:
    https://discussions.apple.com/docs/DOC-3353
    Ciao.

  • Mac 10.6 won't turn off after update

    Macbook air a1304 won't turn off after updating unless you push on/off button.

    Phone your nearest HP Support  to request warranty service. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Apple Mac book pro just turns off after few seconds after turning on

    Hi Folks,
    I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
    Please help...
    Regards,
    Nadeem

    Correction:
    When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
    - MacBook does not work on batery - evenif  i disconect batery - no result
    - I try with diferent power adapter - no result.

  • TS1363 apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • My mac turns off when the battery reach full charge, what's wrong?

    It was working all right, but
    after a trip, the Mac didn't start, when i try to start the mac only with the battery,
    Started normally, i worked that way for a few moments, then i start to charge the battery,
    a soon the battery reached full charge the mac turns off and i couldn't restarted.
    Again i try only with only the battery, everything was normal again.

    Hi irebecca16,
    Thanks for visiting Apple Support Communities.
    You may find this article useful for troubleshooting your battery issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

  • 10.6: Internet Sharing turns off after restart

    I use Internet Sharing on my iMac to share the Ethernet connection from my computer wirelessly to my iPod touch. In Leopard, Internet Sharing would turn off after a restart. Snow Leopard fixed the problem for a while, but now it's acting up again. Any help?

    Using MacOS X 10.6.2 I have the same problem.
    My network configuration is just the other way around (wireless Internet and Ethernet LAN).
    Looking this up in Google first, I came across this older support link of Mac OS X 10.2:
    http://support.apple.com/kb/TA21168?viewlocale=en_US
    The solution provided there is not really helping though.
    However, it appears that this is a recurring issue Apple is struggling already longer with. Hope they straighten that out at one point.

  • G5 Turns off after 10 minutes

    My iMAC G5 just turns off after about 10 minutes. I had trouble with the power supply a few years ago and I replaced it and everything was great. Now it just turns off after about 10 minutes and I am wondering if the power supply is acting up again. Do these things have a problem like this? It was easy to replace, so I can just do that again if that will fix the problem. But I don't want to just start changing out parts and still have the problem. Is the power supply a problem with this model?

    More info on the iMAC. The processor is 1.8 GHz PowerPC G5 the memory is 1 GB DDR SDRAM running Mac OS X Version 10.5.3. Buss speed 600 MHz, Number of CPUs 1. I just took it apart and cleaned the dust out to see if that will help. We will see.

  • Yoga display turns off after 1 minute

    I'm having an annoying problem with my new Yoga related to the display and have not seen any other posts with a similar complaint so perhaps this is a simple fix that I'm just not able to sort out on my own. My display turns off after 1 minute of inactivity. The only means for changing behavior like this that I am aware of is through the Control Panel Power Options. My settings for "turn off the display" are 10 minutes on battery and Never while plugged in (note screen shot attached). Regardless of my settings, the screen turns off after 1 minute. I've changed the settings to multiple configurations and restarted with no change in behavior. Perhaps there's some other settings area, maybe something specific to Lenovo that I'm not aware of (since this is my first Lenovo laptop). Anyone with similar problems or insight?

    This may be a Windows 8 issue. I finally fixed this problem by identifying the screen saver as the issue (and I wasn't using a screen saver). Type "lock the computer" into the search box after clicking the search charm, which brings up the screen saver dialog box. Mine was set to 1 minute, though I'd never set it myself. If you can't change it, choose a screen saver and you should be able to do so (and can then switch back to no screen saver). BUT, here's the problem. Other things you install (or settings within things you install) can apparently change and override whatever you type in for the delay time. Try applying your new time and exiting from the dialog box, then open it back up again. I was finding that it kept going back to 1 minute. To reset things so that you can get control again, type "user accounts" into the search box and when the dialog box comes up, choose "Reset Security Policies". Then you can go back to the screen saver dialog and successfully change the delay time. See http://social.technet.microsoft.com/Forums/windows/en-us/ace4085a-b0ba-4a98-898d-cd92d9e88e13/window... for some detail.

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Screen turns off after a few minutes and needs to be closed then opened

    hi, as the title suggests my powerbook screen turns off after a few minutes before my screensaver is set to come on and when i come back and press a key or move the pad it wont start up so i need to close the powerbook then open it up again for it to activate. its not a huge problem but my programs which connect to the internet seem to lose their connection when i open it up again. is this normal? is there a setting i can change?
    thanks
    ross

    Is there a way to "disable" Standby, Suspend and Off just when watching movies (in fullscreen or not)? I want them to do what they usually do in all other cases.
    Setting them to 0 in xorg.conf does the thing, but I need that functionality only when I'm wathing movies. Making a script that alters adjustments in xorg.conf isn't the best solution - you'd have to restart X every time you want to watch a movie .
    Cheers,
    Daniel

Maybe you are looking for

  • Integration Engine Monitor with PI Payload Search (Tcode: ZMONI)

    Hi Team, Good day. I have been trying to search the internet on how to use the PI Payload Search (PIPS) functionality of the Integration Engine Monitor (Tcode: ZMONI) but so far I did not find one. Does anyone know how to use every functionality of t

  • Can't install Outlook Connector - authentication problem

    Hello: We are not being able to install Outlook Connector in two PC's running Windows XP. After filling authentication data the installation program states that the information is not valid. With the same installation files and the same authenticatio

  • HELP!! please please please read this

    i installed my Ipod Nano on my friends Mac and now i cant get it to install on my comptuer which runs Windows XP!! what do i do please help!!

  • How to download files from iMac to MacBook Air

    I have an iMac and time capsule.  I bought a MacBook Air for travel.  I need to be able to copy apps and files from the iMac to the MacBook Air.  I figured I could use time capsule for that but have no clue how to do it.  Should be easy, so thought I

  • CD DVD print size is missing from Apple print menu options

    Hi all, I wonder if anyone has this same problem I'm trying to fix. Thanks for you input, is much appreciated. When I bought my Canon Pixma MG 5350 that can print over blank printable CD or DVD, there was an option to choose the CD / DVD size. You co