Mac upgrade to IOS 10.10 won't let me open pscs5.1, help?
After upgrading to MAC 10.10 I can't open pscs5.1, Can anyone help?
#1 I am NOT a rep for Adobe. I am a product user just like you. This is mainly a user-to-user forum. If you don't see a Staff badge next to the forum member's name, they do not work for Adobe.
#2 CS5.1 is no longer supported. That ship has sailed. If you want to keep using 4-1/2 yr old software, you need to pair it with a compatible operating system. If you want to upgrade PS, that's another option, too.
Creative Cloud
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Purchase CS6
Creative Suite 6
Nancy O.
Similar Messages
-
Help my iPhone 4 won't receive msg after I updated it!! Help
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
10.2.8 on Blue&White won't let programs open-Need sophisticated help :)
I've posted about this and still continued to have trouble. If the super-initiated users out there would be willing to give me more advice, I'd be eternally grateful. I'm going to be as specific as I can to preemptively avoid confusion, as possible.
I ran a beige desktop G3 for years with OS 9.2.2. When it crashed (before I figured out how to get it back up with the help of this forum), I bought a stripped blue and white and 10.2(.8) from a local Mac store. I finally bit the bullet (my primary use is Pro Tools).
Between the beige's crash and receiving the blue and white in the mail, I was instructed how to start with apple-option-o-f restart commands and got the beige working again (with 10.2). It was fine. But since I had the blue and white with a faster processor, I was excited to get that going. So I took the hard drive (a 120 GB drive), my 320 mb of RAM (2 are clearly marked PC100, the third is marked "Hyandai" with no mark indicating of its PC100 or otherwise). But with this RAM and drive in the blue and white, the blue and white ran pretty smoothly. It was slightly glitchy though. Once in a while, a program would suddenly quit and there it was just a little buggy. But not bad. I decided rather than using the hard drive with the OS 10.2.8 installed on the beige, I would wipe the drive and install it on the blue and white to see if that solved the issue. That was the beginning of the end.
Any time I open a program, it immediately closes. The interesting thing is that if I persist, it opens a little longer and a little longer until, in the case of my internet browser, it works pretty normally. Other programs however just won't work and will not open. They act like they're opening and then they close. Sometimes the screen goes blue in between while it closes. But usually it just opens and closes leaving the desktop in its standard state.
Also, weirdly, I cannot drag anything. If I try to drag something within a folder or at all, it won't move. I tried to drag something out of the trash (that I hadn't put in the trash) and it wouldn't come out.
It's been suggested to me that this is all an issue of RAM. The reason I question that is that the computer ran basically very smoothly prior to me reinstalling the OS. I've tried wiping and reinstalling again with no improved results.
I'd really like to be able to use the blue and white and not have to reinstall everything in the beige. And I am looking into getting more RAM. But I'm a poor musician and since this very same computer just as it is ran pretty well before, it's hard to believe that's the issue.
So, again, the primary issues are that programs close as soon as you open, except with a few programs that if you keep trying to open them eventually stay open after repeated attempts (per startup). And the fact that nothing is draggable. If I could solve these problems, I'd be a very happy songwriter.
Any help you can offer is supremely appreciated.
And no- - I'm not going to upgrade my OS again right now- - can't afford it and I'm already regretting this upgrade a great deal. Would just like to get this one working if possible.
Also, I cannot get OS 9 running. At all. I have tried. If OS 10.x.x is present, no matter what the startup disk is, OS 10.x.x starts. And if I take OS 10.x.x off completely and leave only the OS 9 system folder, the computer won't boot. It's like OS X has ruined my computers.
Please help if you can. Thanks.When you installed the drive(s) inside the B&W G3, what sort of disk carrier did you find inside the computer? Are the drives to be mounted next to each other or is there a "U" shaped bracket where one drive would be mounted above the other?
There is a machine specific issue with the B&Ws where the drives are to be mounted next to each other. This was the layout in the Rev 1 machines. There is a known corruption problem with just about any other hard drive except the one that originally came with the computer for the Rev 1 B&Ws. You can read more about the compatibility on <http://xlr8yourmac.com>. With these Rev 1 machines, the only real solution is to install a third party drive controller in a PCI slot.
Mac Mini; B&W G3/300 -
After upgrading to iOS 5, apps won't start on my iPhone 4 !!
Does anyone know why on earth such crash occur after upgrading to iOS 5, apps won't start on my iPhone 4 !!
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also, See Here...
Troubleshooting applications purchased from the App Store -
How to open older version of iPhoto from an external drive. It won't let me open or upgrade to the latest version?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what fixes have you tried?
how is the EHD where the library is located formatted?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
i use to have facebook, facebook messenger on my ipod touch, and recently i upgraded to ios and now it wont let me reinstall the apps, says i need to upgrade to atleast ios 6, but it wont let me ugrade to ios 6 says it has no upgrades, that the current version is the newest!!! this is crap... how can something work and then now it doesnt work when its suppose to be improved??
Any suggestions would helpYou can likely download the last compatible version by:
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists. -
Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?
Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086
-
I have a mac and have downloaded adobe several times and it still won't let me open any online documents. when i try to open the document it says I need to agree to the end user agreement
yes and when I push the icon to download and go through all 3 steps it says this version is already downloaded. so i close the browser and try to download the document again and it says the same error
-
Apple you massive cults. I upgraded to yosemite now it won't let me ubgrade iphoto because 'I did not buy it'- sort it out
Try each of these in order until one works:
Open App Store and click on your Purchases tab. If you're prompted to accept them, then do so.
Put the old ones into the Trash, temporarily. Open App Store and see if you can download them for free from their individual product pages. If asked to buy them, see the next option.
Click here, contact Apple, and wait for a response.
You will have to purchase them using your Apple ID. -
I am having issues with the address book in iphone 4s ios 7. it won't let me add and adress for a new contact. anybody has an idea of what's wrong and the solution ?
Do you have Restrictions turned on in Settings>General?
-
i need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciatedi need to copy a file over to my mac from a CD but it won't let me due to read write permissions. does anyone know of a way to get around this?
any assistance will be much appreciated -
My mac won't let me open mainstage
i installed logic x onto my mac through the app store and it came with mainstage. i installed an update that my mac was bugging me for. now it won't let me open mainstage as it seems to think it was installed off a cd and i need the CD key which i do not have as i bought it through the app store. how do i sort this?
It is likely more something wrong with your kit. Try manually downloading and installing 10.7.1 over the top of your current installation of Lion. Hopefully it will fill in any missing pieces.
http://support.apple.com/kb/DL1437 -
I Have tried everything and it still won't let me open anything in Safari. I have reset the Mac and router. It's just not working.
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
If that's not what you see, post the contents of the window. -
please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data. please anybody help me...
Only possible if you have made an iTune or iCloud backup before the update.
-
I restored my iPod touch 4G to get iOS 5, I want to restore it to my setting's I had before, so I selected "restore from iTunes backup" on the ipod. "connect to iTunes" on the new set up screen on the ipod. But I already restored it to my previous settings from iTunes. I have tried connecting it and re-syncing it. I am completely lost on what to do. It won't let me do anything! Help?
Thank you!Try close all apps in multi-task window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
Maybe you are looking for
-
Backup Restore With SQL Server 2008 R2 although it succeeded with SQL Server 2008
Dears; I have a Full backup of some DB of around 417 GB within SQL Server 2008 R2 , and when I tried to restore it , i get stuck several times with the error below : Restore failed for Server (Microsoft.SqlServer.SmoExtended) A system assertion ch
-
Read and sort values present in .ini file
Hi all, I have a .ini file in which a set of modules with there order of execution is mentioned.I want to get all these values sorted as an array so that I can proceed with the execution of each in the order mentioned.The module list in the .ini file
-
To Upgrade to 3.1.2 OS or Wait?
I have an iPod Touch 2G running 2.2.1 OS. Everything has been running quite well. I've been patrolling these message boards since the 3.0 release and have noticed many horror stories about upgrading (i.e. wifi crippled). Now that we're at 3.1.2 it se
-
Jhs 10.1.2 : ampersand eacute; converted to ampersand amp;eacute;
Hello all, First of all congratulations to the whole team of JHeadstart for the great job you are doing. I am evaluating different products to generate standard to complex database interfaces and Jhs looks very promising to me. Now on with the troubl
-
Web Folders, where are files and content stored?
When files/content are added to Web Folders, via Portal, where are these files stored? In the database? file system? Thanks in advance for any answers! ~Chris