Mac users: back up your site definitions before applying the 11.0.2 update
The 11.0.2 update to Dreamweaver CS5 is intended to fix the problem with FileVault on Mac OS X. I don't know the full details, but I presume that it locates the program settings in a different place or rebuilds them. Unfortunately, this has the effect of deleting login details for sites you have set up in Dreamweaver. Make sure you back up your site definitions before applying the 11.0.2 update on a Mac.
The update doesn't affect site definitions on Windows (at least, not in my experience).
One could also try a machine restart after the patch has been successfully applied.
Similar Messages
-
Back up your iCal files before applying the Mac OS X 10.4.4 Update
It seems as though this sort of thing should not happen, but the mere application of the Mac OS X 10.4.4 Update - in small but noticeable ways - damaged my existing calendars, rendered a subscribed calendar effectively unsubscribed, and the Birthdays calendar present but empty. Neither of these calendars were actually removed: they just appeared devoid of data.
Because I had previously backed up the calendars using the Back up Database… option in iCal before applying the update, I simply restored them to fix the issues in the standard calendars.
To fix the subscription problem, I had to unsubscribe, then re-subscribe to that calendar.
To fix the Birthdays calendar issue, I simply had to launch the Address Book, remove a birthday in one record, exit the edit mode, then paste it back in. Instantaneously, the Birthdays calendar was populated with data once again.
Does anyone actually test these updates before they are released? [Facetious question, I know - but one does have to wonder…]
PowerBook G4 12 867 MHz 640 meg 40 gig SuperDrive Mac OS X (10.4.3) What problem? I use the The Missing Sync for Palm OSYou have limited options:
1. If there is an Apple retailer nearby you can have them copy the update to a CD for you - usually at no or nominal charge.
2. You can go to a local Mac user group (if there is one in your area) where they would be happy to provide a copy of the update for you on a CD at no or nominal charge.
3. You can find another Mac user who has a high-speed connection and can download the update for you.
4. You can call AppleCare and order a copy of the update on CD for a charge of (I think) around $9.95.
5. You could find a Mac owner somewhere who would copy the update to a CD and mail it to you at any negotiated cost. However, do not solicit this assistance on these forums. Of course anyone reading this post could offer their help.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
i bought adobe creative suite premium actual cds, with serial yet when i put its serial in to redeem it and download it onto my new mac through your adobe site it says on your site it says my serial is invalid, when my serial is not, it is clear you adobe advertise you can use your old software on new apple computers but clearly this is not the case; forcing me and all to shell out vast amours of money just to use your products i have already bought????.......i will never buy your product again!!!!
Your post makes no sense to anyone. you have not provided proper technical information or version information. rather than going off on a tangent, you may want to read this:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Sign in, activation, or connection errors | CS5.5 and later
Redemption Code Help
For anything else contact support by web chat.
Mylenium -
IWeb '08 will delete files from .mac. BACK UP your custom files!
...obliterated everything in Web/RSS and Web/Sites/iWeb.
Just a word of caution if you keep roll-back versions of hand-customized HTML in there with your site files.
By the same token, the new file structure & naming scheme is less hideous. Single folders for scripts and media, etc. (at least for the podcast layout)No, I do not believe so. Time Machine would keep all those now-deleted files in previous backups, and as time goes by those backups might be deleted if you needed room, but it would still keep one backup from each day in last month, as well as one from each week forever, as long as you don't start running out of room, then just the oldest would be deleted to make room if needed.
I use a backup drive about double the size of my drive to be backed up, so I would guess it will never get to the point where deleted files being replaced by new ones being backed fill up that drive to the point where backups actually have to get deleted. -
On opening my Itunes it asks if I want to download latest version - usually I say yes and away it goes, but lately it redirects me to the Apple site like I am downloading it for the first time and i am scared if I go through with it that it will create a new Itunes and my old one will be lost and all my songs - is this happening to anybody else - will it override your old itunes?? I don't understand why its changed?
Please help, anybody!
Thanks
Liv-eAll should be fine... but... just in case... have you considered backing up your iTunes Library Before doing any Update.../ Upgrade...
Always a Good Idea to have a backup, especially of Music and Photos...
See here... Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751 -
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you. -
How do you get back in your ipod when you forgot the password
how do you get back in your ipod when you forgot the password?
Connect the iPod to your computer and restore. Place the iPod in recovery mode if necessary. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
I am a very brand new Mac user. So anyway, when I point to the apple and click on "About This Mac", it says the operating system is, "OS X Version 10.8.2. The question, is this "Mountain Lion", or is that additional software I need to download?
Jon Kevin wrote:
I am a very brand new Mac user. So anyway, when I point to the apple and click on "About This Mac", it says the operating system is, "OS X Version 10.8.2. The question, is this "Mountain Lion", or is that additional software I need to download?
Yes 10.8.2 is the latest version of Mountain Lion. 10.7 was Lion and 10.6 was Snow Leopard.
Cheers
Pete -
When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."
What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.
-
I can't install adobe reader on PC/windows 7, Message: windows installer doesn't permit updating managed adversed products. at least one feature of the product must be installed before applying the update.
I have no idea what that message means; try uninstalling using http://labs.adobe.com/downloads/acrobatcleaner.html then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/
-
I have just purchased a Mac Book Pro. I would like to find the list of all updates and downloads that have occurred since purchase. Where can I find that info?
I know how to do the updates. What I dont know is what size each update that I have completed was. I am having a data usage disagreement with my Telco and want to prove to them that this computer did not download the amount of data they are claiming it did.
-
Just wanted to get your opinion.
This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware.
Starting with OS X 10.7.5, there is another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications that are downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Applications certified in this way haven't actually been tested by Apple (unless they come from the Mac App Store), but you can be sure that they haven't been modified by anyone other than the developer, and his identity is known, so he could be held responsible if he knowingly released malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe. Note, however, that there are some caveats concerning Gatekeeper:
It doesn't apply to software that comes packaged as an installer. Treat all third-party installers with caution.
It can be disabled or overridden by the user.
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to applications downloaded from the network. Software installed from a CD or other media is not checked.
For more information about Gatekeeper, see this Apple Support article.
Notwithstanding the above, the most effective defense against malware attacks is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. [Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.]
“Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
Java on the network (not to be confused with JavaScript, to which it's not related) is always a potential weak spot in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
Never install any commercial "anti-virus" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else. -
When you are backing up your iPhone or iPad to the Mac, what folder does it go to.
What folder does a backup from your Iphone or ipad use.
~/Library/Application Support/MobileSync/Backup/
Note: The "~" is your Home folder. Hold the Option key on Go, then select Library. -
I have created a custom blog site definition using SharePoint 2010 blog site definition with Configuration ID 31 in onet.xml (new value). This was working fine for SharePoint 2010.
We created new SharePoint 2013 farm and deployed the all Custom solutions in
14/15 folders. After migrating the sites to SharePoint 2013 using Content DB approach, site created previously using my custom definition are working fine.
But after running site collection upgrade these sites stop working. When I post a comment then comments not getting listed on post detail page. However comments are getting added to Comments List but
PostTitle column of Comment is not getting populated.
Also, when we create a new site in SharePoint 2013 using my custom blog template then that is also not getting provisioned. default.aspx and look-up between post and comment list are not working.
If any one has faced such issue then please share your findings and any solution to fix this.
Thanks in Advance :)Hi ,
According to your description, my understanding is that the blog based on custom blog site definition didn’t work correctly after migrating custom blog site definition to SharePoint 2013.
If you customized the Onet.xml file in a previous version's site definition, you should modify some sections in the file to work in the current version, like <BaseTypes> and <ListTemplate> etc. More information, please refer
to the link below:
http://msdn.microsoft.com/en-us/library/office/aa543837(v=office.14).aspx
For that the PostTitle column of Comment is not getting populated, please try to modify the view, then compare the result.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
After creating two mac users do not see when I turn on the second
Hello , after installing Yosemite I created two administrative users , turn on the computer but I do not see you and the other , I have to get into the first and by this move to the second . how do I fix ? thank you very much
Hi jpacchioni,
I apologize, I'm a bit unclear on the exact issue you are describing. If you are saying that you are not seeing a login screen or the second user on startup, thereby forcing you to go into the first user and then switch to the second user, you may need to check your Login Options. You may find the following articles helpful:
Customize the login experience
If you are an administrator, you can specify how the login window looks to all the other users.
Choose Apple menu > System Preferences, then click Users & Groups.
Click the lock icon to unlock it, then enter an administrator name and password.
In Users & Groups preferences, click Login Options.
Click the “Automatic login” pop-up menu, then choose a user, or choose Off.
If you choose a user, then whenever the Mac starts up, that user is automatically logged in. If you choose Off, then at startup the Mac opens a login window showing all the users. Automatic login takes effect the next time you restart the Mac. For better security, don’t set your Mac to automatically log in an administrator. If FileVault is turned on, automatic login is disabled.
Select the options you want. If you have any questions, click the Help button for detailed information.
OS X Yosemite: Set up users on your Mac
OS X Yosemite: Login Options pane of Users & Groups preferences
Regards,
- Brenden
Maybe you are looking for
-
I turned off the daily update of web gallery and set it to manual. I did this because iPhoto was locking up for a long time each time I would open it. It was updating the ton of web galleries I've created. I thought I could then make changes as I wan
-
Tcp/ip write help - need to send a motor command with parameters
hello - i have one small, main labview 7.0 vi that i use to control a drill's two motors. right now i press a button on the front panel to move the motor, and when i do, a sub vi window pops up so the operator can set a couple of parameters and press
-
Programmatically search for a word in PDF file
In the program I am developing, I am opening up a PDF file from the application. Is there any way to search for a particular word in the PDF file and move to the page containing the first occurance of that word in the PDF file programmatically? I am
-
Copy SMPTE location bug in 24 and 23.976 Frame Modes
This one is driving me crazy - often I used to just double click the SMPTE in the transport to copy and paste into a marker when re-timing a section of a film score - now if you double click in a 24 frame based project the numbers displayed are inco
-
Help on tracing flow of file in httppost
hello ppl... am havin problem in posting file(s).. my doubtz r... -all examples in net give the file path as file name...so i did da same..but i got the length of body as zero..so i tried a full path address but in vain it gav me same result -this.re