Mac video call problems

I installed Skype on my mac and installed it on my android phones, but cannot add both the phone to a group video, when I do I just get the skype people logo, I can do them one at a time
Attached a picture
Attachments:
Skype.jpg ‏54 KB

Mobile devices like ones based off Android can't participate in group video calls with video enabled.
https://support.skype.com/en/faq/FA12286#5

Similar Messages

  • Video calling problems with kindle fire

    Video calling is unresponsive. The other person cannot see me during the call.

    Same is going for me and when I look back this problem has Been happening since October so what are we supposed to do about this, I have contacted skype and amazon and it not working so well zoo far I'll keep trying I'll let you know if I find anything

  • Msi windpad enjoy 7 skype video call problem

    i just bought msi enjoy 7 last week but when i used skype it doesnt support video call,and websites videos are not playing it says that some plug-in is needed.i need some advise.thanks

    Quote from: mherskie on 16-April-12, 06:51:22
    i just bought msi enjoy 7 last week but when i used skype it doesnt support video call,and websites videos are not playing it says that some plug-in is needed.i need some advise.thanks
    I already have this msi windpad enjoy 7. you will need to uninstall the update of adobe flash player 11 to 10.2 in order to view videos. Simply go to settings,; applications; manage applications; choose adobe flash player 11.; uninstall. it will revert bak to 10.2. don't forget to restart your tablet after the uninstall. As for skype video call, There is a problem with the skype application software so you cannot make a video call. There is a missing plug-in with the skpe video call and i'm still working on it.

  • N73ME Video Call Problem

    I updated to V3.0705.1.0.31 the last couple of weeks. The problem that i'm having now is when i do a video call and set it on speakers, the other line can barely hear me if I don't put the mouthpiece close enough when i speak. But interesting is when i switch to handset (during video call) they can hear me fine even if the phone is away from me but then i have to put the phone close to my ear to hear them. It kinda got switched(?) anyone got the same problem? don't know if it was fine before the update.

    IF you don´t know if it works fine before upgrade is more complicated. If everything else works well, could be hardware. Go to a Nokia Service to check that.

  • N96 Video Calling problem

    Hi
    Anyone any ideas how to resolve the following. When I make a video call to my g/f, after 4 or 5 seconds the fone freezes up and then shuts down and restarts. I'm on o2 and have firmware version 11.018. Any advice is much appreciated.
    Many Thanks

    our operator must approve video calling
    your phone too
    and you must be in 3G coverage area
    that's it
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Group video call problem

    So I have skype premium and trying to do a group video call but it only connects video with one person and the other person only connects audio. Why is the other person not able to connect with video

    The person that does not connect with video is most likely using a Skype client that does not support video in group calls (such as a mobile client or iPad).
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Nokia 500 video calling problem

    Hello Nokia..
    I had just bought Nokia 500 mobile.  As shown in advertisement & specificatio shown on website, there is 3g supported phone.  But lake is there is no video call feature. I spent around 10K for this phone but no video call feature. I know it has no front camera but I have 6233 3g phone. It has main camera only yet it support video calling and I already doing this.  Then why this option is not available with this phone. 
    I feel like cheated by nokia. 
    Can Nokia reply my thread with genuine reason and care like genuine customer.?

     The fact is you should have asked the question if the 500 was capable of video calling before you bought the phone. There is absolutely nothing anyone can help you with here and reading the specifications page makes no mention of video calling so that should have given you an idea that it's not supported.
     As I said in my previous post, this is a user to user forum so if you want a Nokia representative to answer your questions you can use the Contact support button at the top of the page.
    Ray. 

  • Video calling problem

    How can i video call without skype & other app.there no applicaton such without internet connection derick video call apps .r u thinking these issue,can u solve it.we want direct video call option.it is possible & my phn is lumia 720.plz give me answer?

    Not sure if you checked for the option after selecting a Contact ..
    Attachments:
    wp_ss_20130810_0001.jpg ‏24 KB

  • Disable Facebook video calling problem

    I Installed facebook vdeo calling, then I did want to use it any more so I deleted the .bundle file from the liberary>internet-plugin folder.
    I am still getting a warning window which pops up for less than half seconds and then disappear even before I can read it..
    In the conlole folder I saw the error message as
    I have deleted the .bundle before but my safri still shows that that plugins installed
    Facebook Video Calling Plugin
    Facebook Video Calling by Skype — from file “FacebookVideoCalling.bundle”.
    MIME Type
    Description
    Extensions
    application/skypesdk-plugin
    Facebook Video Calling plugin provided by Skype
    .. I am just one user on my system, hence  I have only 1 liberary folder.
    I tried reinstalling the facebook videocalling again so that I will be able to see the .bundle file but it still wont show the file in the internet-plugin folder...
    the video calling works fine but I want to delete this plugin, what should I do?

    Hi from Ensenada, Mexico....   I have the same situation some hours ago, and the unique thing you need to do, is next:
    1. Go to your "Home folder", locate the Library folder, then your "internet plug-ins" folder, inside this you will see an Alias file named "FacebookVideoCalling.bundle"
    2. Point and select it with the mouse, then, click it with the second finger click or "CTRL + CLICK", a pop-up menu appear, select from list "show original"
    3. If you erased the "Alias file", please go to this location:
         In a finder window, locate your home folder from the left navigation panel, the route will be
         "your home folder"> Library> Application Support> Facebook> Video> 1.1.0.12> "FacebookVideoCalling"
         { this route appear in my OS X Lion}
    4. The "FacebookVideoCalling" is an application, I recomend that you use an unisntaller software like "TrashMe", if not, just remove all the Facebook Folder sending to the trash....
    5. Is everything to do....   Regards !!!

  • Video call problems

    I have a 7" Kindle Fire HD. When I am going to use Skype on it, I make sure to reboot it first by holding the power button down. Then, when I try to make a video call, it won't work. My recipient says like there's a bad connection. After about the 20th time of pressing the "video call" button, we can hear each other. Then, about 5 mins. later, the video starts working and we can both see each other. Why does it take so many tries to get it to work? Thanks.

    First are you using a external microphone or the built-in microphone? Check if your microphone is on first by going to Control Panel and then selecting Sound, then in there look for the Recording tab and select External Mic or Integrated Microphone Array whichever you're using, and once selected either then select Properties, now this is a very important part.
    First under General tab look to see next to Device Usage that it is selected "Use this device (enable)" next click on Levels tab and change Microphone array slider to 100, and try changing the Microphone Boost slider to 10 dB (You should undo this if the noise level on the receiving end of the person comes out too loud or distorted as microphone boost can be responsible for that).  After you've made changes hit "Apply" then "Ok" and exit out to see if the microphone now works. If it still doesn't work open up Sound in control panel again and go back to the Recording tab and now speak into your laptop microphone, everytime you speak you should see a green bar moving up and down meaning sound is being picked up by the microphone, meaning your hardware is working good and it is the software that you're using thats not picked up the microphone.
    If you're using Skype go into settings and see if you can try to select or detect the microphone, if you're using Gmail video chatting then go into Gmail, on the top right select Settings then select the Chat tab, and under the Voice and Video Chat area you should see a Microphone drop down menu, in the drop down select Integrated Microphone Array (referring to your built-in laptop mic) or select External Mic (referring to any usb-plugged in microphones)
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • QQ International for Mac: Video Chat problem

    Hello Communities,
    I downloaded the MAC version for QQ International to talk to a cousin of mine who will be working in China.  He's had it on his Windows system here in the states for sometime with no problems.  I can get the audio part to work, but the video function works sporadically, and it seems only to turn on my camera if I'm the one making the call.  What I've read says there is no video chat function for the Mac version, but that's strange given that my camera does come on in the cases I've mentioned.  I also then opened up Windows using Parallels, downloaded that version of it, and am having a similar problem.  I have since uninstalled the one on my Windows (in parallel) and the Mac one from my Mac.  There is an update for the Mac version of it, but when you click on it, it takes you to the Chinese version of the website, so I didn't proceed further.  Anyone have any experience with this and have a fix to make it work?
    Regards  and Thanks in advance

    HI Bassplayuh,
    Since I downloaded the last QQ version on Tencent Website, as soon as I am called or I call for a video chat, my QQ crashes.... Tried to get the older version from the App store, but now it is the same.... Anyone got a solution?
    Thanks in advance.
    d

  • Mac video transfer problems..

    I've scrolled the forums but most people that are having my problem appear to be Windows users and also having little success by the looks of it. Therefore I wondered if maybe my problem was answered a little easier by Mac users. I have endless music video's/videos on disc and a few on the computer. I've managed to use the iTunes converter to get a couple on my iPod but only in video, not with sound. The sound is lost in the conversion because the converted copy iTunes also has no sound. I've looked at settings in iTunes and the iPod but it hasn't made a difference. Any suggestions welcome!

    Nevermind..."handbrake" sorted it out.
    thanks to the person who wrote of it!

  • PC-to-Mac video calling issues

    Why is it that PC users can see me but I can't see them when using Skype? Is there something I need to download? I have an iMac OS X 10.6.2. Please somebody help me!!!

    I assume you have a webcam ? (Just checking!)
    Run the Skype setup which includes a little window that shows the video working as a test. If you can be sen there you should be okay.
    Also, ask the person you are calling if on their status window, if there is a small camera next to your name indicating you have a webcam available. If it isn't there, it suggest that your system is not making the webcam available.

  • Video call problem

    Hello,
    When i video chat with someone and i went to internet or minimalized skype i still could see the other person at the top right of my screen. I didnt know what i did but its gone. I want it back but cant find the way how to get that setting back one. Please help

    If you close this pop-out window, then the only option is to restart the call.
    To have this pop-out window to be shown when Skype is not in focus, the option " Show call controls when Skype is in the background" must be selected in Tools -> Options -> Call -> Show advanced options.

  • Intel Mac video playback problem

    I am trying to preview a flash flv inserted into a Captivate
    2 project on an intel Mac running Win XP via boot-camp. When i
    preview the project the audio plays but there is no video. It all
    works fine on my old Windows machine. Using Flash Player 9 and have
    changed every setting I can find in Captivate. Video card setting?
    Captivate setting? Anyone else have an flv playback issue wit intel
    Macs? Thanks

    Uninstalled and then reinstalled Flash Player 9. Evrything OK
    now.

Maybe you are looking for

  • Getting "The remote server returned an error 503 server unavailable" in azure web jobs

    I have created one web job - on demand schedule under azure web site.  This web jobs contains .execmd(i.e.) Console Application. I am retrieving the data from SQL Azure database and uploaded the data in sharepoint online lists. (i.e.)I have uploaded

  • How to get my color ink to print in color

    i cannot get my printer in color, when i hit print, i clink on color but all i get in black, and its  a new cartridge 

  • Error - JMS Adapter in BPEL ..

    We are trying to send the message to remote weblogic JMS Queue using JMS Adapter in BPEL, during that time we are getting the below error in our BPEL console, can anyone help us to solve this error? Invoke_1 (faulted) [2007/10/22 09:29:58] Faulted wh

  • 5D Mark II viewfinder digital display issues

    Hello everyone,  I have a 5D M2 and have started noticing my viewfinder digital display displaying funky when certain amount of light comes in or adjusting the ISO. For example, the numbers for shutter, apature, and ISO are hard to read. My exposure

  • BW Landscape

    Hi, maybe it is a simple question, but, I want to kanow what is the recomended landscape for implement SAP BW. Imean, wich enviroments we need, Development, Test and Production or only with Development and Production is enough. Becouse I undertand th