Mac VZA for Pantech 290 released - but does it work

I downloaded the new 4G Pantech 290 VZAccess software for Mac tonight.  It downloads and installs just fine but, even though it shows all but one of the bars green for 4G (here in Denver), when it connects it only connects with 3G and 1x.  This is in the face of being able to connect with 4G for the last month using the native network setup on the Mac.  This would actually be fine if I could use the Mac native network for connecting on 4G and VZA for connecting on 3G when out of 4G area, but VZA hijacks everything coming from the modem and won't let me connect via system networks when its installed.  So I removed VZA and will continue as before until I learn either what I'm doing wrong or what Verizon is doing wrong.  
Any other early experience with the new Mac VZA out there??

You need to remove the network profile hack and apply latest version of VZAccess + firmware update on Windows/Mac. Then reboot. Then run the Mac version. You need to make sure the latest version of VZAccess is also on the Mac. Sign I really regret posting that, and I wish there was a way to delete posts on this forum because it screwed up a-lot of peoples SIM cards that don't have engineering knowledge like me. 
The reason it isn't connecting because it isn't getting the right CID number from the APN config because you overwrote it with my hack of #1 which is a VZW IMS APN which is needed for their eHRPD LTE RAN.
Apply this fix:
http://www.evdoinfo.com/content/view/3486/63/
(Bottom with the CLI).
Reboot, make sure the firmware update is applied on the VZAccess and the card. Now you can connect with 4G in the Mac.

Similar Messages

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out.  I looked at system settings on trackpad and it is set, but does not work How do I get it started?

    This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
    Here's the link for the safeboot
    http://support.apple.com/kb/HT1564?viewlocale=nl_nl

  • My camera is working but does not work on skype how do I turn the camera on for Skype

    My camer is working but does not work on skype how do I turn the camera on.

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    FIX: 
    1. You need Time Machine
    2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
    3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
    4. Go to Time machine in date that skype work fine.
    5. Change AppleCamera.plugin with file from Time Machine
    6. Restart system, Now skype need to work with camera.
    If that doesnt pass,
    Suggest looking here, much success has been found:
    http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

  • IPad syncing stays on step 5 of 5 "waiting for items to copy" but does not copy anything...  should I restore the iPad?

    iPad syncing stays on step 5 of 5 “waiting for items to copy” but does not copy anything...  should I restore the iPad?

    Hey, I was having the same problem,, i just got mine to work. Take off everything but your apps (meaning take off pictures, music, ringtones, movies, tv shows, etc just leave on the apps) Then go up to the top and go to Store and turn off Genius. Restore your iPhone (It'll ask you to back up, click yes.) Restore from back up, Let your apps come back then when those are done add each category one by one. (i.e. click Photos -> Sync Photos and let them finish, then click something else like music) Hope this helps!

  • Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

    Hi I have just bought a mac book pro 2ghz 8gb ram with haswell.also it's running maverick. I am wanting to start using logic but does it work ok with maverick everything I read says it's no good please help

    Which version of Logic? I have 9, but I've yet to install it. I'm just creating the images of the disks atm to install them on my Haswell. Will let you know how that performs.
    Logic 10 would most certainly work fine though.

  • I dropped my phone in water for a few seconds, but it still works. I went to charge the phone but it fried the charger. It still works though. I just cant charge it. Does anyone know what i should do?

    I dropped my phone in water for a few seconds, but it still works. I went to charge the phone but it friend the charger. It still works though. I just cant charge it. Does anyone know what i should do? it actually burnt the tip og the charger and was smoking  I have no idea how the phone is still working. I do not want to buy a new phone.

    Hi Sean,
    If it fried the charger, then there is something seriously wrong with it. You need to take it to an Apple Store to have it looked at, and be prepared to be told that you will need to get a new phone. If you can't charge it, it will be useless to you in a matter of days anyway. Also, do not even try to hook it up to your computer....you will probably cause serious damage to the computer and be even worse off than you are now.
    Sorry about your troubles. But for your own safety, you need to have the phone looked at! Don't wait - if you wait until it has no more charge left, then no one will be able to recharge it to look at it....
    Cheers,
    GB

  • I have a ipod u2 the screen displays an icon for the current conetar but does not start

    I have a ipod u2 the screen displays an icon for the current conetar but does not start

    Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

  • HT4113 ipad password is giving me problems, works on wallpaper to unlock but does not work for restrictions or reset

    ipad password is giving me problems, works on wallpaper to unlock but does not work on reset or restrictions

    You can try to remember or get the passcode somehow. If not, the only other option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • I want to download adobe photoshop elements 11 but does not work?

    I want to download adobe photoshop elements 11 but does not work?

    download here,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Thumbnail preview works in adobe reader 9 but does not work in adobe 8.0

    I have small issue. Thumbnail works in adobe reader 9 but but does not work in adobe acrobat 8.0 in win xp

    Anyone going to tell me how to do this uninstalling and installing??????????
    I don't want to mess things up even more! Geez--I'm almost 60 years old,
    need to work and this might be costing me a job. I'm not 20 and text and
    e-mail etc every day. I'm just asking for a little help that as I see it ,
    is due to a "glitch" with Adobe's software. They can easily in their
    technological minds put a warning on anything before someone downloads
    anything such as "If you download this and you  have already downloaded
    that,, then it won't work." How tough would that be??? They, like most other
    major corporations, are in it for the money. What has happened to customer
    service???
    I need a step by step with my hand held and so it won't screw up things even
    MORE. Adobe...get your customer service and your software together...This is
    draining. I may lose a job over it. I need to have my computer running well
    at this point in time as there is no extra time to spend dealing with
    software issue that are a result of Adobe's software incompatibility.
    I was on the phone for TWO hours last night telling people exactly what was
    going on. I even read the error message word for word. No one would help me
    unless I coughed up the money that I don't have...and in addition I will
    lose a job that might get me some money. This is why I am so upset. Why is
    dealing with Adobe always so difficult??? Of course, I am upset. I'm
    actually a lovely person. It is just that this stuff rattles my nerves.
    Especially when there is a jobwith a raiseinvolved that I may lose as a
    result.
    Now I had better get dressed and ready for the job I have now before I am
    late for work and lose that job, too.....

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

    I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

    The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\&gt;\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&amp;lt;x2settings&amp;gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.  

  • Moved 8.1 - Nodemanager starts but does not work... SSL problem..

    Hello!
    We moved our weblogic 8.1 installation to a new production machine (which used to be very easy with weblogic 5.1) but of course, it didn't work because of the SSL demo certificates which were tied to the old server name. It dumped the following line on the log and refused to work:
    ...Certificate chain received from localhost - 127.0.0.1 failed hostname verification check
    We changed our demo certificates as stated in the documentation (certgen, keytool...) and now it starts ok but does not work either. Now we are seeing the following expection on the logs:
    weblogic.nodemanager.NodeManagerException: [SecureCommandInvoker: Could not create SSL Socket Factory, reason - java.lang.NullPointerException]
    at weblogic.nodemanager.client.SecureCommandInvoker.init(SecureCommandInvoker.java:67)
    at weblogic.nodemanager.client.CommandInvoker.invoke(CommandInvoker.java:89)
    at weblogic.nodemanager.client.NodeManagerClient.executeCommand(NodeManagerClient.java:161)
    at weblogic.nodemanager.client.NodeManagerExecuteRequest.execute(NodeManagerRuntime.java:1605)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    No Exception Messages
    Any clue or idea?
    Thanks in advance!
    Bernardo Riveira

    I have seen this myself moving domains to a different server. The way I got around it was to set the Hostname Verification for the admin and managed servers to None. This is done via the admin console, SSL tab, Advanced.

  • Reading message from MQ- works in WSAD (IDE) but does not work outside WSAD

    Read from MQ:
    Same code works within WASD but does not work outside WSAD.

    PDL - thanks for the suggestions - here are the results:
    A button on the form that executes "this.print();" works fine.
    Changing "this" to "event.target" results in the same error.
    document.getElementById("PDFObj").Print(); works fine.
    However, the reason that I'm using ".postMessage([message])" instead of ".Print()" is because I actually have a toolbar that has save, print, zoom in, zoom out, page up, page down, etc.... I simplified the switch statement in the post above to only include print, but in reality has a case for each of the functions above. The postMessage call is triggering the error, since the catch statement is printing out the error message above. Any idea why this would work with Professional but not Reader.

Maybe you are looking for

  • How do I convert a DV video file to an AIFF file?

    Can anyone recommend a good tool for converting a raw DV file that I recorded from a DV camcorder into iMovie 11 to an AIFF audio file? I was able to convert to an mp3 file with FLV Crunch but it is does not allow me to go directly to AIFF. I would a

  • Hi how do i save files to a usb flash drive in windows 8 rt

    Hi how do i save a pdf file to a usb drive i have a tablet with windows 8 RT myfiles are in Adobe

  • How to embed HTML5 video player in web page

    I have developed a video player using html, javascript and jquery. depending upon the browser type and mobile/non-mobile device, it creats the html5 video tags or redirect to a fall back flash player). I am using Adobe media server this player works

  • Adding a interval to a date

    I have the number of day and months that I want to add to a date in a number variable, how do I add it or how do I transform a number into an interval of that many months? I have tried a few things without success: Works with literals SQL> select sys

  • Preview app quits unexpectedly after installing lion

    I updated to osx Lion a short while ago, and every time i try to open an image or a document, it quits unexpectantely, and it shows this report : Process:         Preview [14592] Path:            /Applications/Preview.app/Contents/MacOS/Preview Ident