Mac Wifi Won't Connect

My wifi on my mac doesn't work. The wifi symbol does not appear on the toolbar on top. Also, when I go to system preferences>network, wifi is not even an option in the column on the left. I have tried restarting my computer several times. That used to work, but now the wifi doesn't work at all. Any suggestions?

Hi Kert, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Similar Messages

  • My Mac Pro won't connect to Wifi?

    My Mac Pro won't connect to the Wifi that it has been for the past 2+ years. All other devices in our home that use the same Wifi are working just fine.

    Tried doing Network Diagnostics multiple times, did not work. Keeps saying it can't connect or times out.
    What color was the light pertaining to Wifi in the left column?  Red, Green, or Yellowish/Orange?
    Some of the following you may have already tried:
    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • Mac mini won't connect to my wireless router!

    I just bought my mac mini server then connected it to wifi, then after 2 weeks I had to go abroad for a week so I just turned off the switch connecting to my mac, without switching off my mac mini server. then when I get back home my mac mini won't connect to my wifi. I tried everything from manually setting up IP and DHCP nothing works. What happened?
    thanks for help,
    Jakarta

    I didn't reset the machine/router itself because 2 of my computer is still connected to wifi-and working perfectly, but the mac mini server cannot connect to wifi.
    what I did was to set up the "networking utilities"-having said that, what I did was to connect all over again to wifi, this did not work. I did tried to change from DHCP to manually set up IP, neither of these didn't work.
    I'm now stucked!
    Message was edited by: asea

  • After upgrading to iOs7, my wifi won't connect!!!

    I did the most recent upgrade to iOs7, and now my wifi won't connect at my house. My two ipads, computer, and AppleTV all work perfectly, but my phone will not connect. I'm getting the error, "Unable to join the network (insert network name here)." I have tried to reboot my phone, as well as resetting the Network Settings. Please help!!!!

    The new operating system seems to have an issue with apostrophes. At least when it comes to wi-fi.
    Check out your device name. If it is called something like “Claire’s iPhone” it could be the apostrophe that is causing the problem.
    To change your device name go to Settings > General > About > Name. Tap on the name to edit it and remove the apostrophe. Save the change. Switch off your phone and then switch it back on again.
    Your wi-fi should be working.

  • Mac mini won't connect to printer unless other mac on network turned on

    mac mini won't connect to printer unless other mac on network turned on

    Copy the IP address of the printer from the Mac that can connect to it by itself. The IP shows when you start any print job.
    Disable Printer sharing on this Mac.
    Go to the Mac that cannot connect by itself and set up the printer from scratch using the printer's IP. To do this:
    System Preferences / Print & Scan, then click the + sign, nxt select Add Printer or Scanner and click on IP. Fill in the info.

  • TS3276 the connec doctor sr but mac mail won't connect?

    How do you connect to gmail in mac mail when the connection doctor says the connection was successful to the server but mac mail won't connect even after re-inputting the password?

    mac mail won't connect to the Comcast POP or smpt servers
    So your saying that you have comcast at home and it works fine from this machine?
    If you mail works fine at home, then if it doesn't work on the road, it most likely isn't your machine.  It is some other problem:
    -- with the other network
    -- perhaps comcast is preventing foreign mail from working.
    Beth's experience & help
    http://home.comcast.net/~bethkatz/MacMailSetup.html
    You need to contact comcast.
    http://forums.comcast.com/
    http://customer.comcast.com/contact-us/

  • My home wifi won't connect to my iPhone 4S (only) I've tried everything from troubleshooting Please Help!

    MY home wifi won't connect to my iPhone 4S. It connects to every other device besides my phone! I've tried everything from troubleshooting! It can't find the wifi and when I reset network connections it now won't even let me turn it on! Pleaseeeee someone help this Is driving me crazy!!!!!!!! Thanks!!!

    Try erasing your network preferences again from settings-about-reset and erase or something like this and try reconnecting if the problem persists try changing the name and password of your router and if you it keeps not connecting you will have to try restoring your iphone through itunes on your PC.
    Hope this helped.

  • I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

    I just downloaded the ios 6 on my iTouch 4th gen, and my email won't work, my wifi won't connect, my iPod is more sluggish, and honestly I'm really frustrated. Is there anything I can do?

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Downgrading the iOS is not supported by Apple.

  • HT2497 Using Time Machine for home wifi just fine. Switched to cable modem from DSL.  Now having trouble connecting laptops to wifi. ISP says it is not their fault. Mac books won't connect on their own.

    Changed from DSL to cable modem. Now Mac book pro won't connect to wifi - Time Machine?
    One Mac ok, other not. Help?

    Thanks. We have been using an existing Time Machine for wifi.  Cable modem replaced DSL router and was hooked up to Time Machine. What's odd is that 3 computers and iPad2 are connecting to home wifi just fine, using exact same network and password as before. My Mac book pro and an older iPad are not. IPhones are also connecting to home wifi just fine. I managed to get my Mac book pro hooked one time by copying ip address from a Mac that was working (entered manually) then turning that one off. That's not what I need.
    The error message is "no ip address".

  • Mac Mini WIFI won't connect in 10.6

    Hi I have a 2008 Mac mini.  I got Snow Leapord and Installed it on my computer soon after it cam out, but there was one problem- it won't connect to WIFI.  Other computers work fine in the same room, and my own computer works fine when running windows, but won't connect in 10.6.  I have dongraded (or in my case upgraded) to 10.5.8 but am missing some of the fetures of 10.6, is there anyone else with this problem that has found a solution?

    Hi Adam,
    There's not really anything you can do to reset the chip. What sort of wireless encryption is deployed at your place of work? Is it 802.1x or some other enterprise level security? I've definitely seen some "wonky" things with 802.1x and Snow Leopard, it's what is deployed here at the university I work at and support. If it's something more basic like WPA or WPA/2 or worse... WEP then you can try:
    Deleting the saved wireless network location
    Creating a new network location
    Removing any keychains associated with your credentials for the network
    There are ways to "reset" the network software but it's pretty invasive and that's only a last resort. The fact that it works at another location just fine would tell me that there's no hardware/software problem.

  • IPad, iPhone, and Mac book won't connect to wifi

    My ipad (6.1.3), my Mac book (10.6.8), and my iPhone 4(6.1.3) won't connect to home wifi even though all of them did on Sunday night (2 days ago). I have tried forgetting network and reconnecting but didn't work. I have tried to reset network settings on my devices but didn't work. The only thing that works so far is rebooting the router but that's feasible or fair to the other people (who are not apple users) in the house. Everyone else's laptops, tablets, phones, and play station can connect and stay connected. All of my devices can see the network but connection times out. Please help!

    Hey CompeauC,
    Welcome to Apple Support Communities! I can definitely understand the frustration, and there are some troubleshooting steps that don't necessarily necessitate rebooting the router. I found a couple of articles that should be able to assist you in resolving the issue, one for your Mac and the other for your two iOS devices:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    All the best,
    David

  • Ever since my update to Mavericks, my Mac mini won't connect to my wifi network. I reset SMC and still nothing. The error message reads that my WiFi network could not be joined, yet my iPad and Macbook can connect fine. Any help here would be great.

    I recently upgraded to Mavericks on my macmini and suddenly it won't connect to my home wifi network.  It says I need to move closer to my router whioch is really close and it worked fine before so I doubt this is the issue.  Also, my IPad and Macbook connect just fine to the network, so it seems like its localized to my macmini and now funny enough my IPhone.  I tried reseting SMC and PRAM, but this didn't help at all.  Any helpful suggestions?

    What does Wireless Diagnostics show?
    Wireless Diagnostics
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Also try turning off Bluetooth.

  • HP 6520 wifi won't connect

    Just took a 6520 out of the box, trying to set it up/print to it from a windows 8.1 computer, after returning a 4620 printer that had the same problem.
    Ran the setup software. Setup software can't even manage to figure out what wireless network the computer it's running on is connected to - useless.
    Printer can find the wireless network, and when using the wrong password, won't connect, citing wrong password.
    When I use the right password, it just fails to connect.
    I've rebooted my router, rebooted my computer, rebooted the printer. No good. Print doctor software is useless as it can't even find the printer.
    I've turned off MAC filtering on my router, and disabled Windows Firewall. Nothing.
    I have an epson printer that has no problem connecting, and every other wifi capable device I own can connect to my wifi with no problem, from both Android and apple phones to tablets to four different PCs and laptops to my freaking nest thermostat. Why can't my printer manage to just work over wifi?
    I do not have a USB cable for the printer (it wasn't sold with one), btw, so trying that is out (besides, I bought this as a wireless printer, not a wired printer).
    Help please.

    Hi MattMihaly,
    Welcome to the HP forums!
    I see you have a Photosmart 6520 and a Windows 8.1 computer that don't seem to want to talk to one another. I'm sorry to hear this, but I will certainly do my best to help!
    I would suggest you start by following the steps for Windows 8 in this 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati... document (make sure to follow the Option two: Connect with the Wireless Setup Wizard under Step five). If that doesn't resolve it, please try the steps under Your printer has never worked over the network in the HP Wireless printing center.
    I realize you may have tried some of these steps, perhaps all of them, before but often trying them in a specific order is what makes the difference
    Let me know how this goes for you!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Mac Pro won't connect to Ethernet

    My Mac Pro will not connect to the internet, but it connects to Wifi via my comcast modem.
    the modem was switched out today, but I couldn't connect before that - which is why they came and replaced my modem.
    The lights in the Diagnostics window say:
    Ethernet: connected
    Wifi: connected
    ISP: Fail
    Internet: Fail
    Server: Fail
    Any ideas?

    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
    Test. After testing, reboot as usual and post the results.

  • Mac desktop won't connect to wirless internet.

    My Mac desktop, running Lion, won't connect to my wireless internet. All other devices will connect, and desktop will connect via ethernet. Have tried deleting and renaming network and password. Nothing seems to work. Any ideas?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

Maybe you are looking for

  • I have an IPad 1.  I keep getting kicked off the site and back to the start page. any ideas why?  Thank you.

    I have an IPAD 1.  I keep getting kicked off a site and back to the start page.  Any one know why and how can I fix it?  Thank you.

  • Dynamic where clause for cursor

    Hi Friends, I have a stored procedure with a single input parameter where in the input comes as a string of values (ex: EMPLOYEE NAMES) separated by commas. I use this parameter in my cursor query and my requirement is like when the parameter is NULL

  • Don't want to make any changes

    I currently use Elements 8 and store all pictures on my PC.  Do I have to do anything if I just want to leave everything just as is?

  • Branch on button not working

    Hi all, I have an item in page :P1_item_name which is a select list. I want to pass the value of the this item to page 2 item :P2_item_name. In page 1 branch under action section i setted the value of page 1 item with page 2 which is like this -- Set

  • Pictures and Hyperlinks in Mail

    I would like to know how i can insert a picture / a graphic in a mail without having an attachment. Example: "Here you see a house: <picture> We spent two days there" The mail program changes the inserted picture in an attachment. And I would like to