Mac will not connect to Internet through nighthawk router

my new iMac shows I'm connected to Internet but I can not connect. All other devices do.

Your choice of course but then you have all the various of using MS Windows, viruses, maintenance, etc.
You may find this article useful to help you troubleshoot your networking issues. http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/

Similar Messages

  • My mac will not connect to Internet. Our iPad, pc and iPhones are connecting. Pls help!

    My Mac will not connect to Internet,but our iPad,iPhones, and pc are working.

    Try these instructions, they seem to be working for quite a few folks. If you aren't following the written instructions watch the YouTube video too.
    Lion Wi-Fi  problems fix & WiFi Lion Fix on YouTube.
    When done please report back with the results you got, that could help others down the road.

  • Mac will not connect to internet

    Hello I have two macs that will not connect to my time capsule's internet. I know it is not the TC because I have a pc that is right next to it with the same settings as the mac and can connect to the internet. I wonder what the issue is.

    Go to the System Preferences and Network and when the Box opens make sure that you are set to Automatic and below that the name of your Network is in there and finally in the box on the left that Wireless or Airport is selected and Drag it to the top of the list and the Green Dot is on the Wireless Network that is selected.
    Then repeat it on both computers.
    Welcome to the Discussions
    Don

  • DHCP disappeared and Mac will not connect to internet!

    When my Macbook's config is switched to DHCP the Airport Express will not connect to the internet but when it is PPPOE it has not problem at connecting. I never had this problem before but now I am worried and want my DHCP back because it is interfering with other configurations.

    Go to the System Preferences and Network and when the Box opens make sure that you are set to Automatic and below that the name of your Network is in there and finally in the box on the left that Wireless or Airport is selected and Drag it to the top of the list and the Green Dot is on the Wireless Network that is selected.
    Then repeat it on both computers.
    Welcome to the Discussions
    Don

  • Time Capsule will not connect to internet through Bell (Canada) router

    Help! I cannot be connected to my Time Capusle and still use the interenet! I have a 1st generation Time Capsule and the router supplied by Bell Canada is a 2Wire Gateway. When I first purchased the Time Capsule, the same thing was happening. Internet would work when connected to Bell router but not when trying to go through Time Capsule. I called Apple and was able to recieve telephone support which fixed the problem. That was close to 2 year ago and never had a problem until now. Internet works fine when connecting to only Bell router, Time Machine works fine when computer is connected to Time Capsule.
    The only problem is I can't use the interent when connected to Time Capsule (like before).  I have tried everything hard wired and wireless. I have tried hard resets.  I went to call Apple again but found out it was going to cost me something like $60.

    You must bridge the TC.. is the TC in bridge mode.. ??
    What OS is running  on the comptuer?
    In v5 utility go to manual setup.. internet connection.. connection sharing.. off bridge mode.
    In v6 utility go to DHCP and NAT page.. select router mode off bridge mode.
    Once in bridge the TC should work.. remember the gen1 TC is now at least 1year past its die date.. it will become less and less reliable as time goes on.. no matter what you do.

  • HT1178 will not connect to internet through BT hub

    I can connect to the bt hub through time Capsule but no internet?

    How is the TC setup? It should be in bridge.
    If you have it in NAT router it may not work due to double NAT.

  • All of a sudden my iTunes 10.1.1.4 will not connect to internet radio

    Hi all,
    All of a sudden yesterday, my iTunes 10.1.1.4 will not connect to internet radio. It has otherwise been working fine for almost two years.
    My internet connection is working fine for web browsing and email.
    I ran the iTunes diagnositcs and it showed me how to go in to the Windows Firewall settings to check to see if there was a connection... there was already one for iTunes in the list of accepted connections. Just to be sure, I created a new iTunes connection exception and it didn't help.
    The iTunes diagnostics test shows all information as being normal except this info, pasted in below, about the Firewall test...
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    But this information is partially incorrect, according to the Windows Firewall settings themselves.  My Windows Firewall settings show that iTunes is indeed enabled in Windows Firewall.
    I can access the iTunes store, but there doesn't seem to be any test in the iTunes diagnostics that makes it test to see if it is connecting to the iTunes internet radio server.
    Is there possibley a current problem happening with the iTunes internet radio connection?
    Thanks for any suggestions.
    numetro

    Hi movem,
    Are you saying that Apple has changed the URL for every internet radio station in the entire iTunes radio station library?... or are you suggesting that just some of the internet radio stations in my playlist changed their own URLs?
    It seems unlikely that it happens to be that every single internet radio station in my playlist of a hundred radio stations all happened to change thier URLs at the same time, since all of the stations in my playlist will not play from that playlist.
    When I went through and found some of the radio stations in the giant default internet radio station library in iTunes, I found some of my old ones that were in my playlist and they play fine and they can be put in to a new playlist and they play fine there too, but the very same stations still will not play from my old original playlist.
    So it makes sense if you are saying that Apple has somehow changes all the URLs for all the radio stations in iTunes, because that make sense since they all play from the main radio library.
    But, otherwise, to say that all the radio stations in my playlist happened to change their own URLs at the same time, that would be a bit far fetched.
    Did you get some news from Apple that this happened, one way or the other?
    PS: I'm having a hard time finding a few of the stations that were in my previous, original playlist as well... some of them have either disappeared, changed categories, gone off the air or changed their names.
    Thanks,
    numetro

  • Having problem with primary sever will not connect, my internet connection is working

    Having problem with primary sever will not connect, my internet connection is working

    Hello pp585,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues on a Mac
    If you haven't been able to connect to the iTunes Store, a software conflict or your Internet service provider (ISP) may be blocking your access.
    Update iTunes and Safari to the latest version.
    If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. Follow these steps to configure your firewall.
    You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Learn how to use Keychain First Aid to resolve any issues with your keychain.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Have a nice day,
    Mario

  • My Mac will not get on Internet. Email works.

    My Mac will not get on internet. It says it is connected. I am willing to delete everything almost to fix this.

    If you weren't connected to the Internet, you wouldn't be getting email.
    Are you having an issue with your browsers, i.e., Safari? Have you tried other browsers, i.e., Firefox?

  • MBP upgraded to Yosemite and now will not connect to Internet using a Cisco router

    I Upgraded my MBP mid 2010 to Yosemite and now it will not connect to Internet using a system that involves typing in my user name and password in an auto pop up window provided by Cisco security systems. Before, using Mavericks, it worked perfectly: boot up MBP and the Cisco pop up auto loaded. Typed it my password and hey presto, connected to Internet. Now, zilch. There is nothing wrong with the Cisco cos my iPad connects ok, as do both my iPhone's.
    the problem is with Yosemite therefore. Please help. I tried all the usual diags, etc to no avail.
    Message was edited by: AWAC

    Sounds like there could be some kind of compatibility issue between ICS and this Bluetooth device of yours. Is there any compatibility info from the manufacturer about which Android versions that's being supported?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ???

    Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????

    1st problem see http://kb.mozillazine.org/Firewalls
    2nd problem, to close Firefox properly use File > Exit
    :not with the [x] in upper right corner which close window
    :see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    :if restarting use "Restartless Restart" extension as mentioned there.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • TS1398 My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet.  It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • Green light on Airport Extreme but will not connect to internet

    I have tried restarting computer and Airport Extreme but it will not connect to internet.  Unit has been working great up until now.  I have made no changes in system.
    This Airport/time machine is 2009 version.

    The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
    It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
    Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
    Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
    Leave everything powered off for at least 30 minutes.  Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
    After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
    Power up the AirPort Extreme next, and let it run a few minutes
    Then power up other devices one at a time about a minute apart
    When the entire network is back up, check the network.
    It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
    To do that, power off the AirPort Exterme for a few minutes
    Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
    Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
    Power off the AirPort now, and start it back up in the proper sequence
    If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

Maybe you are looking for

  • How can I code for a click and drag to progress forward/backward in timeline

    I'm working on a project, the goal is to have a .swf animation like this. The functionality I'm looking for is: 1. I need my animation to make one full rotation and stop, and then 2. I need to fix my AS3 so you have to CLICK/HOLD/DRAG to progress for

  • USB to serial port

    Hi all,          I am working on a VI to acquire data external to computer. The data is being acquired via the serial port of the computer. When i first built the software in labview , i tried it in my desktop( which had serial port) and it worked fi

  • Remote Zen Micro, FM recept

    Hi, I am wondering if the remote for the Zen Micro will help receiving FM radio channels. Where i li've almost all radio channels are just noise. FM reception becomes a lot better if I use a pair of Sennheiser HD 455 compared to the original headphon

  • REMOVING HAMACHI FROM OSX LION

    my brother installed this hamachi game on my brand new macbook air. I think i deleted all the files but I cant get rid of this hamachi menu bar item that sits right next to the wifi bar... any suggestions? I want to rid my computer from all the infec

  • Droid Incredible e-mail issue

    I have had my DINC for several months. When I first got the phone, I would delete e-mails and they would reappear in just a few minutes. After a few weeks, this annoying problem went away but now it is back. Has anyone experienced this problem? If so