Mac will not start after entering login credentials
When I start my MacBook Pro it Comes to the login screen. I enter my credentials. The screen goes gray and never changes.
At the login screen, I receive a message sdaying the startup drive is almost full.
What can I do?
Boot to safe mode, hold the Shift key down (either one will work) at startup. Once and IF it boots to safe mode move, copy to external and delete from internal, files from the hard drive to free up space. Then restart normally.
Similar Messages
-
Mac will not start after failing to install mavericks
Help, just tried to upgrade mavericks from snow leopard and I got a message saying hard drive is corrupt and now I can't get anywhere pass an error screen. It keeps flicking from a folder to an error sign. I have tried command r with no response. Lucky I ran time machine to an external hd before I tried upgrade.
What can I do to get my mac running again? I
Thanks
BenAre you able to boot into single user mode and run a disk check?
To use fsck, you must run it from the command line. Unlike using your mouse pointer to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt type:
/sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Resolve startup issues and perform disk maintenance with Disk ...
Scroll down to "Use fsck if necessary" section. -
TS2570 Mac will not start up after software up date, just screen with Apple logo and spinning icon?
Mac will not start up after software up date, just screen with Apple logo and spinning icon? I have tried safe start up, unplugged all other cables, no luck?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
IPSec VPN brings up login box but will not connect after entering password. Have tried this on both IPAD and IPhone 4. Can anyone help?
Uggh, it's so frustrating! I've googled every search phrase I can think of and this seems to be the only thread describing this exact issue. I'm always automatically logged into Facebook on my MBP but just to be sure I logged out and back in and it worked fine.
I gotta say, I wasn't a fan of the Droid I had preceding this iPhone, and from what I hear the iPhone app for FB is a thousand times better - not that I'd know personally because I can't log in!! - but I could always access my FB account on the droid. Just sayin... -
Hi, Last night i downloaded flip for mac & a Samsung software (propably Windows) for my mobile phone... before shutting down i was asked if i want to install & restart, i said yes, after installation, now my mac will not start.... how can i go about this problem?
waynefromhockenheim wrote:
Hi, Last night i downloaded flip for mac & a Samsung software (propably Windows) for my mobile phone... before shutting down i was asked if i want to install & restart, i said yes, after installation, now my mac will not start.... how can i go about this problem?
Flip4Mac shouldn't have been a problem.
The Windows version of anything won't run on a Mac, the binaries are different. So no "PC Studio".
So the only thing I see is a Mac version of Kies, which allows you to manage your Samsung phone.
The spec call for a 10.5 or later, is very unlikely to work with 10.6.8 or 10.7, as there was some "changes"
Usually holding shift key while booting disables the third party kext files that cause the computer to freeze, which would allow you to remove the offending ones from your System/Library/Extensions folder.
Your remedy would be to hold c boot off the 10.6 installer disk (or hold command r boot if on 10.7) and simply overwrite OS X with a fresh copy (leaves your files and other programs alone), that will bump out the Samsung hacks in OS X itself, then immediatly software update to 10.6.8.
If you need replacement 10.6 grey disks then call Apple with a credit card and your serial number (about this mac >more info)
There is nothing you can do at this point without a fresh version of OSX 10.6, unless you know where all the Samsung hacks are and can remove them from Single User mode (aka root)
https://discussions.apple.com/message/16276201#16276201 -
Firefox will not start, after reboot.
For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was releasedHello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
3 year old Mac will not start up, help?
My 3year old Mac will not start up, just sits there and spins. Any suggestions on corrective steps?
Kurt412,
which version of OS X is installed on your MacBook Pro? -
SLD will not start after I upgraded Netweaver 2004s Portal
SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy -
TS3297 Just rented a movie in French on my iMac... movie will not start after download ?
Just rented a movie in French on my iMac... movie will not start after download ?
What I do now ?Okay. I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
FP Install Will Not Start after DLM Install
The FP installation will not start after an apparent DLM installation. The DLM appears to install and the control panel shows it is present, but the FP installation will not start. There are no other messages that appear. A restart and reinstallation attempt installs the DLM again, but still no FP install. Using XP SP3 and IE 8.0.
ThxHi mont1228,
The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box. To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
Best regards,
Chris
clechner//adobe -
I installed Yosemite and my mac will not start
I installed Yosemite and my mac will not start, as I can reload the previous system
Hi c.perez,
Welcome to the Apple Support Communities!
I know that it can be both frustrating and concerning when you cannot turn on your computer. In this situation there are several troubleshooting steps that I would recommend. Please use the attached article as a guide for troubleshooting.
Troubleshooting: My computer won't turn on - Apple Support
Have a great day,
Joe -
Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts? -
IPod service manager will not start after installing iTunes 10
iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).
-
Macbook pro will not start after login
My MacBook Pro (late 2011) with Mountain Lion OS will not start up after my login. All I get after logging in is the spinwheel forever. It will start from guest user. PRAM reset doesn't help. Any suggestions?
Adam,
Try a safe boot, power up holding the shift key note this will take longer so be patient hold the shift till you see the progress bar and try to login. If it works try logging out and logging in normally.
There are some updates availabe that you might want to install.
see here
http://support.apple.com/kb/TS4476
you should probably install yhis update as well
http://support.apple.com/kb/DL1640
Maybe you are looking for
-
When I try turning on my iPod touch the apple comes on and then flashes off
Why is my iPod turn on with the apple and then flashing off
-
I have an older (5years?) MacBookPro. It was making a clicking sound, which continued for quite a while. No programs were running. I could not shut down, or force quit. Finally, I just pressed the power key until it turned off. I waited 15 minutes
-
Distributing and registering to a custom location
My VB application uses an axbridge bean dll and I want to register it on a client's machine. (Call it MyBean.dll and its associated jar MyBean.jar) As I understand it, it has to be registered this way... 1. create a directory called "axbridge" under
-
I bought a MSI-K8N Platinum about 6 weeks ago and since that day I've had nothing but trouble with my wireless network. As I'm not one of those who gives up instantly I figured that I might solve the (what seems to be software)-problems on my own or
-
I have face time installed on my iMac but when I go to the app store it doesn't show installed and has a.99c price. All other apps show installed. Is this an upgrade?