Mac will not wake up

Ever since the newest update to my Mac, it goes into sleep mode on its own after a certain amount of time (as it always has before). But now, it will not wake up. I have to hold the power button to shut it off then restart it. This happens every single time it sleeps now. How do I fix this issue?
I am running OS X Mountain Lion 10.9.2
Jocelyn

Step 1
Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please don't skip any of the steps.
Step 2
If you're running OS X 10.8.5 or earlier, from the menu bar select
 ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
Step 3
If you have more than one user account, you must be logged in as an administrator for this step.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for Diagnostic and Usage Messages. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. In the search box in the window's toolbar, enter "powerd" (without the quotes.) Select the last few messages that appear, if any, and copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).

Similar Messages

Mac will not wake up from sleep

I'm running 10,7,5 on 2x2.66 GHz Dual-Core Intel Xeon. The computer needs to restart because it will not wake after it sleeps. I've tried lots of different settings in the screen saver.
Any suggestions?

.... and you fail to mention the model SSD and firmware version... or how you installed or cloned the system
most people also move most of their user folder to another hard drive.
sounds like a more normal Mail + OS issue if just that.
hard restarts = directory corruption so don't reboot w/o first either Recovery Mode, then follow up with Safe Boot.
And maybe you have 3rd party hardware or software that is not compatible with 10.8.2 needs to be considered as well.
2008 model 3,1 also are having a lot of issues this year. Including another critical piece, what gpu it has.

Snow Leopard Macs will not wake our Brother or HP network printers

It seems that none of our Snow Leopard upgraded Macs will wake our Brother printers. One of which is a 8065DN, but the HP 2840 is also problematic. Are any others experiencing the same issue? If we turn them off then back on they work again-even queued jobs resume immediately. I have tried both static and dhcp network setting and get the identical behavior.

HI Michael,
Try reinstalling the drivers that came with the printers. If that doesn't help, check the vendor sites for SL compatible driver updates.
And try repairing disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

My mac will not wake up once it will be close and put to sleep

when I close my compter then open it again I get either a black screen or a frozen screen.

Sleep – Slow Wakeup/Requires Reset

My MacPro will not wake up from sleep after the 10.8.2 upgrade.

Since latest os upgrade to 10.8.2, my mac will not wake up from sleep.

Please read this whole message before doing anything. This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it. The purpose of this test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Since installing Mac OS X 10.9.2, when my computer sleeps, it frequently will not wake up, and I have to restart from scratch. Any advice?

Since installing Mac OS X 10.9.2, when my iMac sleeps, it frequently will not wake, and I have to force a computer restart.

Kate Bernard wrote:
The OP said that the computer will not awake from sleep, but did not mention any troulble with WiFi.
Are the troubleshooting steps for fixing a WiFi connection after waking from sleep relevant to a computer that fails to wake up at all?
Perhaps.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

MacbookPro will not wake up from sleep after memory upgrade

I am restarting this topic as I have read thread after thread (many years old) and they all just die off with out any definite solution.
I have a 13" Mid 2010 Mac book Pro which originally came with 250gb HDD and 4gb memory
I have recently upgraded to a 256 SSD and a 1TB HDD optidrive replacement along with a 8GB memory upgrade and I am now running Lion 10.7.4
If I close the lid and open within approximately 1 minute it will wake up quickly as normal, if I leave it asleep for a minute or 2 it will not wake up with out holding the power button for several seconds and then I still need to wait a several seconds for it to respond and actually wake up. Sometimes I will need to completely shut down and restart. If I wanted a computer that takes forever to wake up I would have a PC!
The last thing I upgraded was the memory so I am sure it is the cause of the sleep problem and not the SSD conversion which was working fine with the original 4GB mem before upgrade.
I have read about resting the PRAM, resetting PMC as well as executing a line in the terminal, but all of these seem to have variable success. I have tried every thing but using the terminal to adjust the hibernate mode setting as I am not proficient with terminal and don't actually understand what changing this setting does (sudo pmset -a hibernatemode 7).
Has anyone resolved this sleep problem and what did you do? I would greatly appreciate some knowledgeable insight on the hibernation settings, and what running the line in the terminal is actually doing... even better what is the default so I can change it back if it doesn't resolve the problem.
A simple memory upgrade causing such a issues is very irritating.... Any help would be greatly appreciated!

But still, the sleep issue persists, so it is a more subtle timing issue. I upgraded my MBP with a Corsair 8GB kit ( http://www.corsair.com/us/corsair-mac-memory-8gb-ddr3-sodimm-memory-kit-cmsa8gx3 m2a1333c9.html ) and it indicated it had 9-9-9-24 CAS timing. It has worked flawlessly till now. Note that my Mac is a Late 2011, whose memory runs at 1333 MHz.
As far as I can tell, the 13" Mid 2010 models used 1067 MHz memory with 7-7-7-20 CAS timing: http://www.corsair.com/us/corsair-mac-memory-8gb-dual-channel-ddr3-sodimm-memory -kit-cmsa8gx3m2a106c7.html

IMac will not wake from sleep after 10.4.8 Update

Recently after a couple of software updates my IMac goes to sleep and the Bluetooth keyboard and mouse will not wake it. The option for wake with Bluetooth is checked. I zapped the PRAM and also checked the HD, Nothing has changed. NOTE: No new software or hardware installs were done except for 10.4.8 update and the other mac software updates. This did not happen in prior versions of the OS on my iMac. Is this a new bug?
iMac G5 1.8 (pre iSight) Mac OS X (10.4.8) Bluetooth, Wake from Sleep

I've been dealing with this same issue, have tried everything, but to no avail. After MANY sessions on the phone with Apple tech support, as well as an Apple product specialist, I was advised to erase my computer and do a fresh install. I did an archive an install, which didn't help, but am not thrilled about the prospect of erasing everything and starting over. This problem started after the August 2006 round of updates. I feel it's bluetooth related, because I used a usb keyboard and mouse for a week as a test, with no problem. The funny thing is, I unchecked "allow bluetooth device to wake computer" thinking it might help, but the bluetooth devices continue to wake the computer anyway (except when it refuses to wake, of course!)
Jerry

IMac G5 iSight will not wake up from sleep

This has been happening to me for some time.
Occasionally my Mac do not wakes up from sleep. Instead it hangs!
Here how it goes:
I press a key on keyboard; my Mac wakes up, but screen remains black with only mouse pointer. I cannot see login window.
And Mac stays this way for hours. No matter if I press a key, click a mouse.
The only remedy is to press power button and to shut it down.
Then I have checked console.log. Nothing spectacular. Here is log from last accident:
Jul 31 21:43:36 snukec kernel[0]: System Sleep
Jul 31 21:43:36 snukec kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
Jul 31 21:43:36 snukec kernel[0]: System Wake
Jul 31 21:43:36 snukec kernel[0]: Wake event 0020
Jul 31 21:43:36 snukec kernel[0]: USB caused wake event (OHCI)
Jul 31 21:43:37 snukec kernel[0]: FireWire (OHCI) Apple ID 52 built-in: handleSelfIDInt - received quads == 0. issuing bus reset
Jul 31 21:43:38 snukec kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Jul 31 21:43:42 snukec kernel[0]: AFPSleepWakeHandler: waking up
Jul 31 21:43:42 snukec kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending ext sleep wakeup
Any idea what to do?
Matej

Wait - before you take it in for repair or get put on hold with Support try this:
Go to System Prefs, Energy Saver, then set your display sleep and computer sleep times the same. Check both check boxes too.
Trust me, I've been working on this problem with Apple and checking the discussion boards for over a year now. I've had my logic board replaced, power supply replaced, been through about 8 Apple techs and tried just about anything you'll read on these boards or get told to do by a tech. If you notice about every 4th or 5th page has someone posting about this problem. The above suggestion is the most recent thing I tried (from reading posts here in this forum, not from an Apple Tech) and it has come out of sleep for the past 30+ tries without a problem. This is not to say this is IT(the final sovle), because it has been known to go on a good run for a week or so and then come up again. This 'fix' however, has been the most promising. If it continues to work, I will let Apple know and hopefully they can fix the bug. They have all sorts of case history with me on this problem.

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

My iMac (10.6.8) goes to sleep and will not wake up without a hard reboot.

My iMac (10.6.8) goes to sleep after 2 or 3 hours (even if im working at the time) and will not wake up without a hard reboot.
Any suggestions would be very much appreciated.

What all USB or Firewire devices do you have connected?
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if sleep/wake works OK in Safe Mode.
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
next...
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Maverick will not wake up from sleep

Maverick will not wake up from sleep. i dont see any related issues. maybe i am the only one? Ive been trying to run maverick for the last 2 months. I thought everything was fine after I erased, reformated and partitioned the HD and installed Maverick on a clean drive...... and then i get the ? startup disk. And then when it does run, I cant let it go to sleep. It will not wake up from sleep. I get the spinning beach ball of death everytime. I leave my computer on and run to the grocery store and come back........ I have to shut my computer off from the control strip and push the start button, every time.
Anyone know if this will damage my computer??
I have selected the HD in the preferences startup; I've unplugged it for several minutes; started up in S mode; zapped the P ram; ran permissions; you name it. im at a loss.
Any help would be greatly appreciated. Should i buy another Mac? I cant afford one in this economy.

I suggest you use the Recovery Partition Disk Utility to check the hard disk and then re-install the OS from there.
http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

Mac will not respond to pressing on button

Hi, I installed a new HD in a MacBook Pro 17inch 2007 and the mac booted fine. I tightened the screws and now the Mac will not respond to the power button.
I've re-opened the mac and the fan just moves slightly when I press the powewr button and thats it.
I have reset the SMC but this has not helped.
Has anyone else experienced this?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Dual 1.25 mdd g4 will not wake from sleep

if i leave the comp on and it goes to sleep or if i force it sleep, it will not wake, the power button will not pulse its stays on solid, the display shuts down, but when i move the mouse nothing, if i click the mouse it will light up red only when i click it after that i goes back out, the display stays in sleep mode, i have to hold the power button down till it shuts off then restart it and it starts and runs fine till it goes to sleep then i have to restart
any help would be great, thanks

Well I'm having a combination of a number of these issues. Background is dual 1.25 GHz with OSX 4.11. Current situation is that the computer will not wake when put to sleep. This will happen whether I select Sleep from the Apple menu or just let the thing time out and put itself to sleep. I haven't been able to narrow it down but if I don't wait too long after sleep it seems I can log back in (even though during sleep the power light is only dim and doesn't pulse and the fans keep running so it doesn't really seem like "sleep"). Mostly the power light dims when in sleep and then is unresponsive requiring a hard reset. The most recent development is that after some time instead of going into this nebulous sleep state the computer just shuts down altogether, just like a hard crash, and I have to restart and reset the clock.
I've read many of the posts regarding problematic PCI USB cards and I did have one which I removed, but this didn't have any effect. I've reset the PMU to no effect. I should also point out that the USB ports on the back of my Apple Cinema Display don't work now either and I have to plug the keyboard directly into the Mac (though I can boot the computer from the power button on the keyboard).
Any knowledge or suggestions would be great...

Mac will not wake up

Similar Messages

Maybe you are looking for