Mac will not work with Canon EOS cameras

My imac OS X 10.6 is not working well with my Canon EOS 5d Mark II camera on the tethered mode. The camera works well with other Mac computers, and I have spent hours with Canon tech help. It now seems that the issue may be with the computer. The EOS Utility is working, everything has been updated, all Canon checkpoints look good, but when I use the camera, the image does not transfer. And then everything gets locked into a loop and I have to crash the camera and force quit the program. Is there something in the computer that may be blocking the transfers? any ideas where to look? Canon has done everything on the camera side, but I don't know where to begin with the computer.

OH, ok. So the issue is with transferring the image from the camera to the computer. Since you said you have done everything possible with canon, the camera's firmware is completely up to date, you have the correct software installed. Since you say no cameras work with this computer I am inclined to say the problem is from the computer, which is why the problem exists. I'd do an apple hardware test and see if anything turns up. Clean install of the canon software would also be a good idea.

Similar Messages

Have Thundbolt on my mac will not work with my thunderbolt drive

I have a port on my Imac, but it will not work with my ThunderBolt Drive

Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.

WHY FCS WILL NOT WORK WITH CANON XH A1, NOW, EVER, ANYTIME? HELLOOO APPLE?

Well well. Trillions of dollars in Apple technology and canon ingenuity and yet these two behemoths of electronics and computer commercialism cannot create a simple easy to sue interface for a freaking Canon XH A1 camera. I have read forums, googled "compatibility issues", talked to friends, emailed people, and yet no one has stepped up with any assistance in this matter. What really hacks me off is that after spending thousands of dollars on Apple products, and numerous combinations of Final Cut Express, Pro, Studio, I have spent the better part of two weeks doing fresh installs, plugging fire wire cables in each and every port, trying numerous Canon cameras, and still, here at 633 am after all of this, my wonderfully complex Final Cut Studio now tells me that although it "knows" a camera is connected via fire wire, it does not recognize and will not initialize my camera. Furthermore, earlier this week when it DID recognize my camera, the video imported was forced to create clips which stopped a meaningless in and out points. In addition, the audio drifted from one second, to 1.5 seconds, and so on and so forth. Ladies,gentlemen, scribes, aficionados, and causal observers here this: I am officially fed up with having to work harder at getting my project ready to edit, than I ever did actually editing the project. This is sad, sick, silly and stupid. I don't know what's next blokes. Vegas Pro? Avid? I am just worn out by the numerous fixes, upgrades, work around, plug ins filters and tech experts who still can't tell me why Final Cut Studio will not simply let me import my freaking video. I'm done with this silliness. Goodbye Apple! Goodbye Final Cut! I have better things to do with my life than researching subjects that have more contradictions than a rubics cube. i am going to get some sleep, spend time with my wife, and get some fresh air. I hope my apple implodes, and I'll use the FCP disks for coasters when I am sipping my cold brew. ARGGGGGGHHHHHHHHH!

i jsut came across your posting. I have never replied to a posting before but i am in your case. I use the saem camera you do and had the same problems you are facing with your setup. I spent days and hours trying to figure out my problems. Finaly i read that you could reset the camera. And I did and it worked. Open the view finder on top of the camera and you will see the tiny reset hole. Stick a pin in there for around 15 seconds and that should reset it back to the factory settings. I think you have played with too many settings on the camera and it is jumbled this is waht happend to me. then go into final cut, but do not attatch your camera yet and click on the EASY set up tab and set your importing to match what ever you shot your video at. You cannot 60i video on a 30f setting they have to be the same.
Alex
P.S.
Please look at your manual for reseting your camera, I am just going off memory and it has been two years when I reset mine. Here is some of the video I have shot with my Canon(W/Final Cut) Click onh the HD button if you have a fast connection.
http://www.youtube.com/watch?v=7g-p-Ok5uJw&feature=channel_page

My USB switch box (sharing a high speed scanner between 2 macs) will not work with lion. what can I do?

is there some driver or different switch that is compatible?

Hi..
Check the USB hardware website for support for Lion v10.7.

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

I downloaded Firefox 4 and tried to launch it. The message said that Firefox will not work with this version of Mac OX. Please advise.

I downloaded Firefox 4 and installed it. When I tried to launch it, a message came up saying that Firefox will not work with this version of Mac OSX. Now I have no Firefox. How can I get Firefox 3.6 back on my Mac? How can I make Firefox 4.0 work? Please advise.

Thanks for the reply so quickly! Is the tenfourfox going to be be just as safe and as high of quality as the Firefox 4? Also since Mozilla's website says, "Firefox 3.6.x will be maintained with security and stability updates for a short amount of time. All users are strongly encouraged to upgrade to Firefox 4" does that mean if I go back to 3.6 there will be security and stability issues after a "short amount of time"?

When I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please

Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?

You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

I downloaded the latest firefox 4 and updated my file, firefox 4 will not work with my version of Mac OS X, how do I get my old firefox back?

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

My auto focus does not work with Canon 60D. Is it because of the camera or the lens?

I had the same problem. I make my AF work going to Menu / AF mode and selected Live mode. On Quick mode the AF did not work. I change the settings without realise it. Now my AF is working fine.

Mail application will not work with latest version mac 4.5

mail application will not work with latest version mac 4.5

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?

Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>

Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.

Mac will not work with Canon EOS cameras

Similar Messages

Maybe you are looking for