Mac with airport card and PC with wi-fi card
Hi!
I just bought my first mac, and strange, but I have problems connecting my mac via airport extreme card to my wi-fi card (as computer-to-computer or ad-hoc mode) on my PC. I am not using base station or any wi-fi router, just two computers with their internal cards.
PC has WinXP pro with SP2 and mac - imac g5. The problem is that both of the cards are enabled and are working on 100%, but they do not see each other! I tried to create a wireless network on my PC and then search for this network from mac and vice versa - nothing. By the way my notebook finds the PC's newly created network with no problem, but not the mac.
What could be wrong? Is it possible, that it's nessesary to use the base station with them?
iMac G5 Mac OS X (10.4.3) OS Tiger
anyone?
Similar Messages
-
Discovery issues with airport extreme and issues with airport utility
I lost about 3 hours with connection issues while trying to add a second airport express. The airport Utility couldn't find any of the units anymore. After aging a couple of years and checking lots of forums (many suffered the same problems) I found this link
http://support.apple.com/kb/HT1406#
Which seemed to help me reset the units and find them again. Though I can't be certain if it was just luck, the airport utility and detection and resetting of the express and extreme seemed solved.
I would add that this is an area that should be looked at by apple. It is not the first time that I have problems with the airport utility or the extreme.Check the cabling to the Base Station - make sure the modem is plugged into the Base Station's ethernet WAN port (ie the port labelled with the "circle of dots" icon).
With the modem cabled to the Base Station - pull power to both for five minutes or so. Then plug the modem into power and wait a minute. Then plug the Base Station into power and wait a minute. Then try internet access again.
If that still doesn't work:
- on the Mac which can successfully connect to the internet when cabled directly to the modem, tell us what settings are found in System Preferences->Network->Show ethernet built in->PPPoE tab, and under the TCP/IP tab.
- from either a PC or the Mac connected to the Base Station, run the Airport Admin Utility, select the name of your base station, click Configure, click on the Internet tab. Tell us what settings are found under that tab. -
I have a Macbook Pro running Leopard 10.5.8. I had a problem with my my operating system (my fault, I moved a file I shoudnt have) couldnt boot up but was able to boot up from a backup. I managed to repair my original system except now all the system folders, including hidden folders are littered with duplicate folders and files with the suffix (from old Mac). For the most part the dupes are an exact copy, but not always. I want to remove them to free up space and cant imagine duplicate folders in the /system/library are not hindering my computer. But I dont know where to start and am afraid of doing irreparable damage. Any ideas
pacull,
Use iCal>View>Show Notifications to choose what to do with the notification. -
Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?
Solution may be found if you search in the "More Like This" section over in the right column.
-
Trouble with Airport Extreme and Time Capsule
Just got a new 2TB time capsule and added it to my network (existing Airport Express and Airport Extreme). All devices are hard-wire back-hauled to Linksys router. Set up was straight forward with no issues and initiated a time capsule back up without a problem. Within hours I noticed that the TC was no longer reachable in Finder.. Opening the AirPort utility, I saw that both the Extreme and the TC were "lost". Still had (green) internet connectivity, but the base stations were showing as off-line in the Airport utility.
Tried rebooting and checking from multiple other devices and no luck. Occasionally will find them both on-line in Airport utility, but seem to lose one (usually TC) after a short period. All are running the most up to date version of firmware (7.7.3). Prior to installing the TC, I had experienced 0 issues with Airport Express and Extreme.
Has anyone else seen similar issues? Are there settings that need to be accounted for in some way to avoid these frustrating "lost devices"?
thanksThank you for your quick answer, smorkerz. However, I did it and it doesn't work.
I tried to check separately the time capsule and the airport extreme, switching one off when using the other one. The result is that each one works alone but when I use them both, just time capsule appears, works well, and I can't use the airport to print for instance.
Do you understand anything ? -
I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..
1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
What is mechanism to integrate with the rdf and Rtf with concurrent manger
hi
what is mechanism to integrate with the rdf and Rtf with concurrent manger in oracle apps .
can any one help me
Thanks in advance1. Create executable for Oracle Reports.
2. Create a concurrent program based on this executable with output type as xml.
3. Now from XMLP responsibility, create a data definition with data definition short code = concurrent program short code
4. Create template definition choosing the data definition created above. Upload RTF/other template format created.
Now run the concurrent program and test it.
Step by step guide is available here http://www.oracle.com/technetwork/middleware/bi-publisher/overview/xmlebsrep-132947.pdf -
I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!
Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT -
when i open my emails with outlook first and then with my ipad 4, the ipad does not show me that i have new mail despite that it actually downloads them. iphone 3g and 4s used to show them as new emails. any suggestions?
1. Open iTunes.
2. Click the View option in the iTunes menu.
3. Select the Show Sidebar option.
Connect your phone, select it in the Sidebar...the various tabs will now show as before. -
Code works with Dreamweaver CS6 and not with CC
<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC. -
Current 1TB computer dying. Installing new 3TB drive next Thursday. Can I just go directly to my account and install Creative Cloud with Proshow Producer and Bridge with a hastle?
When I look at the forum index Welcome | Adobe Community I do not find a program called proshow
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html
or
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq -
hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it
Those errors are covered here:
http://support.apple.com/kb/TS3694 -
pls could somone help
I tried to redeem an iTunes gift card and it said that my card has not been properly activated
YvesolutionWhat you normally should do when you have an iTunes card that has not been activated is go back the retailer from whom you purchased the card and discuss the problem with them. They should either correctly activate the card or give you a new one. If they refuse to help, as some retailers do, or you don't know or can't get to the retailer, go here:
iTunes Support
and follow the instructions to report the issue to the iTunes Store. They will ask for a scan of the front and back sides of the card as well as a scan of the receipt
Regards. -
I got an itunes card and you cannot read the card
I was trying to use the itunes card and I cannot read the card
I can give the GCA card:Help here. iTunes Store: Invalid, inactive, or illegible codes
Apple Gift Cards - FAQ's -
Trying to set up an Apple ID and iTunes accout everything is fine until I enter payment info then I get a message saying seek assistance apple support? Tried bank cards, iTunes gift cards and an American Express gift card? Help please!!!
Click here and request assistance. That message means to contact the iTunes Store staff and not to post in these boards.
(95634) -
switched cards, and then redeemed more gift cards. Now it will not let me buy even from my credit from cards.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
Process Chain - Follow on dependencies to DSO Activation
Hi, I have a Data Load Process where the start routine is dependent on DSO data that was just previously activated. For some reason it looks like the the time before the load and the time after the DSO activation are close by just seconds. The Data
-
IMac display or a Samsung external display?
Hi I am in the market with $1200 to spend on a computer. I was looking at a Mac mini + a Samsung 20 Inch monitor + Apple Keyboard + Logitech Mouse=Somewhere around $1100 The iMac is not so far away from the $1100 price tag, but i hate the Chin on the
-
Open PDF with Flex Mobile Project
I want to be able to read PDFs inside a Flex Mobile Project (I'm working with Flash Builder 4.6 and Android and iPad). I've tried successfully stagewebview to load a pdf from a web server with this: webView = new StageWebView(); webView.loadURL("htt
-
Setting artboard size in an action CS4
I'm converting large numbers of emf files to svg files. In CS3 I can do this simply by recording, open, save as , close. In CS3 it doesn't take account of the artbord in this process so It doesn't matter what the size of the original graphic is, the
-
Transaction marked rolled back
Hi I'm have a FacadeBean F1 which uses Required transaction attribute which calls another Session Bean S1 which has default transaction attribute(Supports).This uses customized UserTransaction. In bean S1 this is the sequence of steps Method{ insert