Mac with new drive/system can't see Time Machine backup.

The drive on my wife's MacBook Air went bad and we got it replaced at the Apple Store. She started the Air, went to restore her files from her Time Machine/Time Capsule backup and her backup was not listed.
Then we tried again and the migration assistant says 'connection failed.'
I checked the volume from my Mac and the 'sparsebundle' is on the Time Capsule.
Any ideas?

This is a guess, but I'd try mounting that "sparsebundle" before you launch Migration Assistant.
If that doesn't help, check item #19 of Time Machine FAQ.

Similar Messages

  • Renamed home folder but now can't see time machine backups

    Per instructions from Apple forum , i renamed my home folder from Home to <myname>.  In so doing, the home folder did not get renamed on my time machine backups backed up over time capsule.  How do I either rename my home folders on my backups or "connect" my new account name to my old account name backups?

    Pondini has some instructions for inheriting old backups.
    See B5 and B6 here.
    http://pondini.org/TM/Troubleshooting.html
    In the end.. you might find nothing works.. and directly altering the TM backup is really not going to work.. so you may end up needing to do a wipe and restart with a fresh clean backup.
    You need to realise you have made a major change to the system.. and the backup is not going to work, if the home folder name is changed. What it probably will do is backup the new home folder in the next incremental backup.. so you will still have both your old and new names.. this is correct btw.. you cannot make that sort of change and have the TM forget the old name.

  • Replaced hard drive, but can't access Time Machine backups of old drive

    My internal hard drive was failing so I replaced it. I told the people that replaced it that I could install the System myself and that I had backups of my data.
    So, I got the machine home, booted up from the Snow Leopard Install DVD and selected Restore from Time Machine. I chose the last backup which was Mountain Lion 10.8.2. It crashed after several minutes.
    So, I restarted. But I had my finger on the Control key rather than the Option key, so it booted to on-line recovery mode. When it asked me if I wanted to restore Lion I decided, "Sure. Why not? Since the restore from Time Machine doesn't work." That took about six hours.
    Then I went to the App store and downloaded Mountain Lion. Another six hours and that is done.
    Now I can't access the backups on Time Machine. They appear to be there. It shows backups to Feb 2011, which is when I installed Time Machine on an external drive. But I can only access databacked up from my new drive and Admin account.
    Last night Browse Other Drives for Time Machine at least showed the old backups. After shutting down overnight only the new backups show.
    I've run verify and repair on the external and it's okay.
    Please tell me I can get that data back. There's over a decade of stuff there going back two other Macs. Photos, important documents, all my writing are there. I really need it back and I can't understand why I can't get back.
    Thanks in advance.

    Hi all... I had a very similar issue.  I had a hard drive replaced by Apple on my iMac due to a total hard drive failure.  I attempted to restore my last time machine back up through my time capsule but I get some type of sparse bundle package error.  It appears that something is coming back from the back up as I only have about 180GB remaining space out of 1TB.  Any advice?  It appears that Apple had re-installed the latest version of Lion back to my hard drive.  I'm completely distraught here as like Romantic Heretic, I have over a decade of information currently lost.
    Any help with step by step directions would be GREATLY appreciated.
    Thanks

  • HT201250 I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
    http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

  • Can't copy Time Machine backups to new hard drive

    The external HD with the Time Machine files is unusable (it can't be written to). Disk Utilities reports missing/damaged nodes and recommends copying all files to a new volume and erasing the HD. I got a brand new HD and began copying the contents. I was able to transfer all the regular files but when I tried to copy the Time Machine files, I got this message: "The backup can't be copied because the backiup volume doesn't have ownership enabled."
    I want to use the new HD as the TM volume and continue with the same sequence of backups. How can I enable the ownership soI can copy the files?
    Thanks

    Michael Brady wrote:
    I want to use the new HD as the TM volume and continue with the same sequence of backups.
    You can't.
    Time Machine backups use a complex structure; everything is intricately linked together. If that structure is damaged, as yours is, they can't be copied successfully.
    If you have a copy of +Disk Warrior+ or another heavy-duty 3rd-party disk repair app, it's possible it can repair the backups. DW is about $100, and probably a good investment for the future, but there's no guarantee it can fix the backups.
    And it's not a good idea to mix other data with your backups. See #3 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

  • Hard drive packed up, but had Time Machine backup. I installed new sad and upgraded to Mountain Lion., but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  Graham

    Hard drive packed up, but had Time Machine backup. I installed new ssd and upgraded to Mountain Lion, but I can't find iPhoto library and photos or iTunes songs? Is there an answer to this?  A backup run did not install either photos or songs. Graham

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • When I get to the select disk page it says that the HD is uesd as time machine drive. How can I remove time machine backup from my Mac.

    I am tring to installe OS X Mavericks. When I get to the select disk page it says that the HD is uesd as time machine drive. How can I remove time machine backup from my Mac.

    Open up your Finder and click on Go on the top menu bar. Select Computer and then double click Macintosh HD. In here delete the backup folder. Might be called backups.backupdb.

  • Can I reconnect Time Machine backup after drive swap on OS X 10.6?

    Hi,
    I swapped my MacMini's HD few days ago (previous one was dying, had hardware issues). I used CCC and replaced with a hybrid drive. So far, so good. However, when I plugged back the external USB drive were I keep my Time Machine backups, it is not being recognized, TM wants to run a new full set.
    I did some research and discovered that TM may use the HD or machine's UUID and that's why it's triggering the new FULL.
    I also found this article by Pondini (which seems to be a guru on the topic, lol ): 
    http://hints.macworld.com/article.php?story=20090213071015789
    But attrb is not working, I guess such command it's not available on 10.6.8 ? ...
    How can I reconnect Time Machine backups to the new HD? Or ... I simply cannot and I will have to delete and run a FULL set? I would prefer to keep my old backups, if possible, but it seems that with my OSX version that's not possible without workarounds.
    Thanks in advance,

    ** EDIT **
    The trick did not work :-(
    I entered into TM and while I can see the old backups , I can't select them or do anything with them. Clearly, they have not been identified as previous backups, hence the reason for Today's FULL.
    Ohh boy ... I'm about to give up ...

  • I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

    i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

    Guitar21,
    your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

  • Macbook air can't see time machine?

    macbook air can't see time machine?

    Can it see the external drive? Look at Section B
    Time Machine Troubleshooting

  • Can't access Time Machine backups on Yosemite

    Hi guys
    I'm having some trouble with TIme machine. I did a clean install on my mac. Upgraded it to Yosemite. I could then access my backed up files (although Apple hides most of it for any reason). As soon as I chose the same external hard drive to again be my Time Machine backup drive, all the older backups got unaccessible. When I open Time Machine I can see my older backups but they won't show any files. If I manually look for them in Finder I am locked out.
    Is there any way to tell OS X to please let me have my files back?

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
    If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
    The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
    The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
    Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
    The next part is "Users", followed by a slash.
    Next is your (short) user name, which is also the name of your home folder.
    Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

  • I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.

    I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.?

    Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
    When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
    If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing.

  • I just installed Mountain Lion on my iMac that was previously running Snow Leopard. Bugt I found that some key applications no longer work, so I would like to go back to snow Leopard. I can't use time machine backups for this. what can I do?

    I just installed Mountain Lion on my iMac. But In was dismayed to find that my Canon scanner software (Canoscan LIDE500F)no longer works. Nor do any of my MS offce applications. I tried to use time machine to reinstall Snow Leopard (my previous operating system), but unfortunately my time machine backups did not include system software. Also, the original system install disk that came with my iMac would not allow me to install Snow Leopard in place of Mountain Lion. I would appreciate it if somebody could tell me how to solve this problem.

    The reason your Office doesn't work is because it is PowerPC code. If you will upgrade the 2004 Office to 2011 Office then that will work.
    I don't understand how you managed to get your Time Machine backup to not backup the system.
    Now if you still what to downgrade you will have to erase the disk and reinstall Snow Leopard. Most likely all of your application and then restore your data from Time Machine.
    To me it sounds like it would be easier to upgrade your software and stay with Mountain Lion instead.
    Allan

  • Lion can't see Time Machine drive that Snow Leopard does

    We just set up a backup system for our group. It's a 8 Tb Pegasus drive attached to a Mac Mini Server. I have set up 4 Macs running Snow Leopard with no problems at all. Two systems are running Lion and I can not get Time Machine to see the backup drive. We are connecting via AFP on a network.
    Any ideas or remedies? Thanks!

    If I'm understanding correctly, your 4 SL machines work fine with the drive. Your Lion machines do not seem to able to see the drive in TM.
    But your Mini server is a Lion server correct? It can browse and backup to the Pegasus on its own right?
    The link Linc cited is related to an issue with older storage devices that use legacy AFP and no longer work properly with Lion machines. Even if the legacy is enabled you can only browse the drive and can set the drive for TM, but will not be allowed to use it for TM (TM errors will say as much). But this Promise Pegasus? is a brand new Thunderbolt using product entirely which subsequently makes me think that can't be the case at all.
    Random thoughts:
    How about LAN traffic firewall? Any chance you have the AFP port blocked internally?
    I briefly flipped through a manual on the Pegasus... and it doesn't even offer any hints on time machine or shared usage. I guess there isn't anything particular on the disk side to do besides plug it in and the disk arrangements.
    OS side... buggy sharepoint setups? TM usage is a selectable function for any particular sharepoint. I'm not sure how you are setting it, but have you tried to create a sharepoint on the Pegasus (a folder stored on it and not the root) and share it out with TM allowed? You should be able to see that at least.

  • New hard drive on iMac but can't use time machine backup

    I just installed a new hard drive on my 2007 iMac but it will not let me back up to a time machine backup.  I can see the files i want but has the red circle with this message  :The folder “Documents” can’t be opened because you don’t have permission to see its contents.  help!

    You haven't gone about this the right way. After installing OS X, when you booted from the new drive, you were prompted to transfer data from a Time Machine backup, among other options. That's what you should have done. The simplest, but not the fastest, way to recover is to start over by erasing the startup volume and installing again.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier

Maybe you are looking for

  • Max cursors in a plsql package

    Pls let me know are there any limitations to the maximum number of Cursors (normal) in a Pl/sQL package/procedure? Thanks in advance

  • How to get forgatted new/old password through typing his/her emial address

    we are on 11.5.10, I would like to know any feature availabe in oracle erp, which help user to type emial & then new password automatically to be sent there emial address.

  • Help, why did all my adobe products suddenly stopped working ????

    im a photoshop and indesign user, suddenly one day photoshop is freezing on open, and i cannot do any functions with it.... so eventually frustrated with it, i uninstall it and try to reinstall.  however, i open creative suite and it tells me i need

  • How many active threads in JVM?

    HI, Is there a way to find out all the running/active/blocked/unknown threads in a JVM? Doesn't matter if it is through code or some external command. I use jdk1.4 on Red Hat Linux. Thanks and Regards suri

  • Somebody help the newbie!

    Hi. its the first time i'm looking at java or ppo btw. well what i needed to know is how to create a vector, add things, delete things, from it and how to use it outside the class he was born in. oh and another very newbie quizz. whats the difference