Mac won't recognise my camera

My Nikon D700 has become invisible to my new Mac. I managed to download some photos at first, but now Adobe Bridge (CS5) is telling me 'None detected' in the 'get photos from camera' list, & the camera is not seen by the Finder either. Can anyone advise what to do; I've never had this problem with any PC running Windows!

Do these two resets:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.
PRAM RESET
Zap the PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

  • Mac won't recognise camcorder

    My mac won't recognise my sony DCR-PC5E. It works fine on Windows, and my mac recognises other Sony DV's using the same firewire. Any ideas? I don't want to have to buy a new camcorder....

    Martin,
    Welcome to the discussions.
    Assuming you're using FireWire (what sony calls iLink) your camera should work.
    Have a look through some of the tips in this thread:
    http://discussions.apple.com/message.jspa?messageID=2842371#2842371
    Matt

  • Adobe Elements 12 won't recognise my camera, Panasonic HDC SD 800.

    I've recently downloaded Adobe Elements 12 because iMovie won't recognise my Panasonic HD video camera. I installed the Elements software because I wanted to do some video editing to a couple of recordings that I did the other day. I connected my camera via USB link to my MacBook Pro, (I downloaded the Mac version of Elements),  and it still won't recognise the camera, even though it is a very expensive top of the range product. The model name of the video camera is Panasonic HDC-SD-800, and my biggest fear now is that it's the Macbook itself that won't recognise the camera, and I've just probably wasted a lot of money for the software. Can anyone help?

    This is an AVCHD camcorder and, if you have it properly configured for your OSX to recognize, Premiere Elements will also interface with it using Add Media/From Flip or Camera (which opens the Video Importer).
    Have you opened the Video Importer?
    Is your camcorder turned on and set to VTR and is it configured to interface with your computer? (If so, it should show up as a device in Finder. Does it?)

  • My mac won't recognise my new belkin hub hardware. Any Suggestions? It used to recognise it before I had the hard drive replaced

    My mac won't recognise my new belkin hub hardware. Any Suggestions? It used to recognise it before I had the hard drive replaced and now it doesn't.

    Pull out all of your USB devices, and reboot. Now, replace the USB devices they way you'd like them to work. That reassigns the devices so you can use them again.
    Respond here...I'm interested how this turns out.

  • My mac will not recognise the camera on my iphone so i cannot move my photo's

    my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?

    Hi Sylvia's iMac,
    Welcome to the Apple Support Communities!
    It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
    OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
    Cheers,
    Joe 

  • Mac won't recognise my JVC video camera

    Last night when I connected my video camera it did work and I was able to put a whole tape onto my hard drive. However this morning my iMac would no longer recognise my camera.
    - My camera is JVC GR-D53AA.
    - The connection I am using is firewire.
    - The software I've been using is iMovie.
    - I've lost the installation CD but have a feeling it wouldn't be mac-compatible anyway. I've attempted to find a driver in the thought that might help, but to no avail.
    - I checked out system profiler and it said, "Unable to list FireWire devices."
    I've turned my camera on and off, quit and restarted iMovie; didn't help.
    Unplugged and replugged cords.
    I don't know whether the problem lies with my camera or computer or what.
    Any help would be really appreciated.
    Thanks.

    I have the same problem and obviously the repairing permission's seems to work... unfortunately as happy as I am knowing that someone has found a solution to a problem that I am also faced with... I am faced with the problem that I am a fourteen year old Mac illiterate... could you possibly explain in order how to 'repair permissions'?
    Cheers, Micko.

  • Old Itunes library (from PC) on external hard drive - Mac won't recognise

    I feel like I've tried absolutely everything, so hopefully someone here can help.
    I had my Itunes library stored on an external disc. This was when I was using Itunes on a PC. It all ran fine....
    Now we've upgraded to a Mac and for the life of me I cannot get Itunes to recognise the library.
    First I just tried changing the folder location with no luck. Now I've tried holding down alt when starting Itunes, I've located the folder, and at first it seemed all was well as the albums (sans artwork) all appeared in Itunes. But when I try to play them or send songs to my Iphone, it says it can't locate the file. I've tried to then manually point it to the external drive and the old library and it still won't recognise it.
    Can anyone suggest anything??

    AnnieeR wrote:
    Can anyone suggest anything??
    these two reads may be helpful: one and two.

  • Mac won't recognise Nikon D80

    I'm trying to upload photos from a Nikon D80 I've had for several years, but haven't used lately. When I connect it using the Nikon supplied USB cable, the camera display indicates it's connected to a computer, but the Mac doesn't recognise there's a camera connected to it. This problem occurs on my MacBook Pro and also on my iMac. It also occurs whether I use Aperture or iPhoto. Aperture version is 3.4.5. I conclude there's a connection problem between camera and MacOS, but I don't know how to diagnose or correct it.

    As i said I'm not a Nikon user so I might be way off base but I downloaded the manual for the D80 and under the section on connecting to a computer is where they mention the different modes when connected.
    If you don;t have the manual you can get it here Product Manual in pdf format. Look for the section Connecting to a Computer under Reference. If you download the pdf manual open it in Preview it is easier to move around in it there then in Safari.
    If the camera has been in limited use for that long it is possible something got reset in it. I'd give that section a look to see if it helps.
    If in the past the camera showed as a device on the desktop that indicates to me the camera should be set to Mass Storage so look in the manual for how to get to that setting in the camera.
    good luck

  • Mac won't recognise external burner

    my mac has been working with my external apple burner, however, it now won't recognise it even though i have a blank cd inserted and i'm unable to eject it

    Turn off everything and disconnect the external burner, then do an NVRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
    Turn on your Mac.
    Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
    Hold these keys until the computer restarts and you hear the startup sound for a second time.
    Release the keys.
    Reconnect the burner and try using it.
    (Excerpt from How to Reset NVRAM on your Mac - Apple Support)

  • Mac won't recognise the CD in the Optical Drive

    My MacBook Pro won't recognise the CD in the Optical Drive. So I can't eject it put new one in.
    Why is doing this? How do I solve the problem and get my CD out?

    Are the CD's you are trying to install store bought CD's?
    What you might try doing if the CD drive is not showing up under the source is going to file and then clicking on Add to Library within iTunes. Find the CD inside of My Computer and trying to add the music.

  • My mac won't recognise my ipad

    have been trying to get my mac to recognise my iPad.
    Followed the apple assistant prompts and installed latest itunes update; restarted; tried different usb ports but no luck.
    any suggestions?

    Device not recognized (Mac)
    http://support.apple.com/kb/TS1591?viewlocale=en_US

  • My mac won't recognise my iphone

    My mac wont recognise my iphone

    see if this apple support documnent will help:
    http://support.apple.com/kb/TS1591

  • I have a panasonic Sdr-H85 my Mac does not recognise the camera. So I cannot get pictures or movies off the camera

    I have tried but this on my laptop and desktop computer. But neither computer see the camera. can some one please help. thanks.

    What type of cable are you using to connect the camcorder to your Mac? Are you tring to import into iMovie or just drag and drop the movies to copy to your internal HD?
    Clinton

  • My WD Passport for mac won't recognise its own password or show up on the desktop

    I have a Macbook Pro and have been using the Passport for 3 months without a problem. The cable was pulled out without ejecting the Passport the correct way. Now it doesn't show up on the desktop and a colourless window pops up and asks for the password. Im 100% sure the password is correct. The window thinks about it for about 20sec then shakes to not accept it.
    I have tried to repair the Passport and that has not worked. Does anyone have another solutations to access the HD?
    The passport still works, the light comes on and still spins.
    It seems as if it has forgotten its own password and not recognised by the computer.

    Allan,
    Thank you for your reply.
    Yes the WD Passport for Mac has its own password to access the drive. It is an option that i stupidly activated once it was installed. Previously as i plugged the Passport in it would pop up on my desktop and ask for the password. Which it would accept and then i could access the data. Now nothing comes up on my desktop but still asks for the password but does not accept it. The colour of the window for the password has also changed. It now looks like the "security and privacy" icon that you can find in your systems preferences.
    It seems as if it has forgotten its own password or there is some other security or problem blocking me.
    I obviously wasn't aware that this product had so many problems. I have not installed the Mavericks program to this computer yet as it takes time and im on the road without and solid internet connections.
    I will persist with searching forums and trying to recover the data
    Any information or help would be awesome!!!!

  • My mac won't recognise my iPod classic-any ideas why or how I can fix it?

    My ipod classic is quite old but still functioning properly as far as battery life etc is concerned. However I recently bought a Mac Pro and it will not recognise my ipod. Occasionally it will 'find' it but I cannot access it through itunes to edit my library. PLEASE HELP! Thanks, Courts

    Quit iTunes.
    Use Disk Utility and select the drive if you can, then select Erase and the middle or security option zero all data option (will delete all data of course).
    When that's finished, use iTunes to restore it.
    That's how I fixed mine. Make sure it's charged up first, the Mac ports sometimes cut the power off.

Maybe you are looking for

  • My iPhone Will Not Sync Since I Got My Laptop Back From Repair

    I wanted to mention first that my laptop was repaired by a friend who is very well versed in all types of computer software and operating systems. I have Windows 7 and downloaded the most resent update of iTunes. I have been downloading different sof

  • Deleting records in millions - any ways to speed

    Hello Friends, I have a table with millions of records . As I am doing testing , I got to delete millioins of records and load then load using ETL tools. Using simple delete is taking hours together - any ways to increase the speed of deletion. I can

  • Communication Error

    I am getting this error very frequently can any one help me in the same. I want to know the reason for this error. Thanks in advance

  • Demanding more human-oriented PDF metadata!

    I am trying to write a plugin for PDF reader where an user, most likely a scholar, can select some text and have a bibliography automatically made ready by the plugin. It saves lots of time for scholars and university students doing research projects

  • AA-Asset ID Number from Asset Under Construction to Final Asset

    Hi Expert, In our organization we use Asset Under Construction by creating individual asset and later we released to final asset. The system work fine in accounting wise but in practical scenario we are facing issue to track physical asset number. Ex