Mac won't recognise my correct password

My password was workign just fine a few mins ago, my mac went to sleep and asked for my passcode. I typed exacltly what i type eveytime however ut just woldnt regognise it! I am 100% sure that its correct and its just not accepting it at all. I havent even changed it in months and im sure it want i think it is however it wont let me through!

Hello Rakki_horror,
Thank you for the details of the issue you are experiencing with logging into your Mac. 
I am not sure if you have checked this yet, but I recommend verifying that caps lock is not enabled first.  If you are still unable to log in, you may need to reset your password for your user account as described in the featured User Tip below:
Reset the user password in OS X Lion, Mountain Lion and Mavericks
https://discussions.apple.com/docs/DOC-4101
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • My WD Passport for mac won't recognise its own password or show up on the desktop

    I have a Macbook Pro and have been using the Passport for 3 months without a problem. The cable was pulled out without ejecting the Passport the correct way. Now it doesn't show up on the desktop and a colourless window pops up and asks for the password. Im 100% sure the password is correct. The window thinks about it for about 20sec then shakes to not accept it.
    I have tried to repair the Passport and that has not worked. Does anyone have another solutations to access the HD?
    The passport still works, the light comes on and still spins.
    It seems as if it has forgotten its own password and not recognised by the computer.

    Allan,
    Thank you for your reply.
    Yes the WD Passport for Mac has its own password to access the drive. It is an option that i stupidly activated once it was installed. Previously as i plugged the Passport in it would pop up on my desktop and ask for the password. Which it would accept and then i could access the data. Now nothing comes up on my desktop but still asks for the password but does not accept it. The colour of the window for the password has also changed. It now looks like the "security and privacy" icon that you can find in your systems preferences.
    It seems as if it has forgotten its own password or there is some other security or problem blocking me.
    I obviously wasn't aware that this product had so many problems. I have not installed the Mavericks program to this computer yet as it takes time and im on the road without and solid internet connections.
    I will persist with searching forums and trying to recover the data
    Any information or help would be awesome!!!!

  • Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber.

    Changed AppleID p-word and now can't login to icloud on mac mini. I use correct password and I get spinning grey wheel. I know it's the correct password cause any other p-word gets error message. Also, my time capsule is blinking amber. I've reset my password a few times and it doesn't help. Also have shut down completely and unplugged everything to no avail.

    Hey jamesarm97 & diegofoto,
    On August 21st, some users may have been unable to access iCloud services for a short period of time. Apple worked quickly to resolve these issues, however you two may have experienced them. To check the current status of these systems please see:
    Apple - Support - System Status
    http://www.apple.com/support/systemstatus/
    If either of you are still experiencing issues, you may want to troubleshoot with the following articles:
    iCloud: Troubleshooting web browser issues with iCloud.com
    http://support.apple.com/kb/TS4050
    iCloud: Account troubleshooting
    http://support.apple.com/kb/TS3988
    Thanks,
    Matt M.

  • Mac won't recognise camcorder

    My mac won't recognise my sony DCR-PC5E. It works fine on Windows, and my mac recognises other Sony DV's using the same firewire. Any ideas? I don't want to have to buy a new camcorder....

    Martin,
    Welcome to the discussions.
    Assuming you're using FireWire (what sony calls iLink) your camera should work.
    Have a look through some of the tips in this thread:
    http://discussions.apple.com/message.jspa?messageID=2842371#2842371
    Matt

  • My mac won't recognise my new belkin hub hardware. Any Suggestions? It used to recognise it before I had the hard drive replaced

    My mac won't recognise my new belkin hub hardware. Any Suggestions? It used to recognise it before I had the hard drive replaced and now it doesn't.

    Pull out all of your USB devices, and reboot. Now, replace the USB devices they way you'd like them to work. That reassigns the devices so you can use them again.
    Respond here...I'm interested how this turns out.

  • Old Itunes library (from PC) on external hard drive - Mac won't recognise

    I feel like I've tried absolutely everything, so hopefully someone here can help.
    I had my Itunes library stored on an external disc. This was when I was using Itunes on a PC. It all ran fine....
    Now we've upgraded to a Mac and for the life of me I cannot get Itunes to recognise the library.
    First I just tried changing the folder location with no luck. Now I've tried holding down alt when starting Itunes, I've located the folder, and at first it seemed all was well as the albums (sans artwork) all appeared in Itunes. But when I try to play them or send songs to my Iphone, it says it can't locate the file. I've tried to then manually point it to the external drive and the old library and it still won't recognise it.
    Can anyone suggest anything??

    AnnieeR wrote:
    Can anyone suggest anything??
    these two reads may be helpful: one and two.

  • Mac won't recognise Nikon D80

    I'm trying to upload photos from a Nikon D80 I've had for several years, but haven't used lately. When I connect it using the Nikon supplied USB cable, the camera display indicates it's connected to a computer, but the Mac doesn't recognise there's a camera connected to it. This problem occurs on my MacBook Pro and also on my iMac. It also occurs whether I use Aperture or iPhoto. Aperture version is 3.4.5. I conclude there's a connection problem between camera and MacOS, but I don't know how to diagnose or correct it.

    As i said I'm not a Nikon user so I might be way off base but I downloaded the manual for the D80 and under the section on connecting to a computer is where they mention the different modes when connected.
    If you don;t have the manual you can get it here Product Manual in pdf format. Look for the section Connecting to a Computer under Reference. If you download the pdf manual open it in Preview it is easier to move around in it there then in Safari.
    If the camera has been in limited use for that long it is possible something got reset in it. I'd give that section a look to see if it helps.
    If in the past the camera showed as a device on the desktop that indicates to me the camera should be set to Mass Storage so look in the manual for how to get to that setting in the camera.
    good luck

  • Mac won't recognise external burner

    my mac has been working with my external apple burner, however, it now won't recognise it even though i have a blank cd inserted and i'm unable to eject it

    Turn off everything and disconnect the external burner, then do an NVRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R.
    Turn on your Mac.
    Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.
    Hold these keys until the computer restarts and you hear the startup sound for a second time.
    Release the keys.
    Reconnect the burner and try using it.
    (Excerpt from How to Reset NVRAM on your Mac - Apple Support)

  • Mail on my Mac Does Not Recognise my iCloud Password

    I have transferred to iCloud from MobileMe today.The first problem I have found is that mail is not getting through to my Mac because Mail is not accepting my iCloud ID, I get a message as follows:"The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “mathewson”" I know I have the right password - I have to use it to get onto this site.What can I do?

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • Mac won't recognise the CD in the Optical Drive

    My MacBook Pro won't recognise the CD in the Optical Drive. So I can't eject it put new one in.
    Why is doing this? How do I solve the problem and get my CD out?

    Are the CD's you are trying to install store bought CD's?
    What you might try doing if the CD drive is not showing up under the source is going to file and then clicking on Add to Library within iTunes. Find the CD inside of My Computer and trying to add the music.

  • Mac won't recognise passwords

    I can no longer access sites requiring personal passwords (email, facebook, ebanking etc) that I could before. I get to the internet site okay but when I'm prompted for username and password, the computer goes no further. I work through a server network and this has an access password, but it did not hinder other access.
    Can't think what could have happened. I did run Tech Tools to clean up directories and optimize HD but have also done that before with no problems.
    Have cleared caches in all libraries, and know that this problem occurs with both Safari and Firefox so it's not search engine problems.
    Can anyone suggest ideas?

    Hi,
    I created a new user in Accounts, and rebooted, logged in as new user and tried to access some of the password protected sites. Unfortunately, no joy, which leads me to believe that re-installing the original system from the system disks I have won't solve the problem either.
    Have also tried again to verify and repair file permissions using the Disk Utility application but that hasn't worked either.
    Looks like Plan E or F by now.
    Thanks for staying with this.

  • My Mac won't recognize my iCloud password. iOS and webapp does.

    Hello,
    I recently changed my iCloud password, after updateing to Mountain Lion (10.8.2). I wanted to access the "Back to my Mac" feature and I was asked my password. I set up a new one on the web as I had troubles remebering it (or maybe it's the same problem I'm having now...).
    Ever since, I couldn't set up my new password on iCloud on my Mac. It works fine on iPhone, iPad (latest iOS 5) and on the webapp but it's impossible to log in on my Mac.
    It either says that the password is not valid or I just have the spinning wheel for hours.
    Anyone has an idea why and how to make it work again?
    PS: I'm using different accounts for iCloud and iTunes.

    My sympathies, Loriskumo.
    I was finally able to connect from the System Preferences / iCloud panel. The trick was to paste most of my password, then type the remaining characters; then the Submit button was activated. Apparently, the iCloud panel doesn't want the password to be 100% pasted—as long as you type at least one of the characters yourself, you are permitted to submit the login and password combination, and be connected.
    After all that, I discovered the iCloud System panel contains nothing about setting security questions! Instead, one must connect to the My Apple ID website, where the password is even stricter—you cannot paste into the password field, but 1Password was able to enter my password into the field. Loriskumo, you might have to manually create an entry in 1Password itself which you can then use on the web page, if you need to get into your security settings, etc.
    Hope this helps someone!

  • Mac does not recognise my admin password when I try to install updates

    I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

    Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
    http://support.apple.com/kb/TS1278

  • My mac won't recognise my ipad

    have been trying to get my mac to recognise my iPad.
    Followed the apple assistant prompts and installed latest itunes update; restarted; tried different usb ports but no luck.
    any suggestions?

    Device not recognized (Mac)
    http://support.apple.com/kb/TS1591?viewlocale=en_US

  • My mac won't recognise my iphone

    My mac wont recognise my iphone

    see if this apple support documnent will help:
    http://support.apple.com/kb/TS1591

Maybe you are looking for

  • Wishlist for Playlist Managem

    I've used playlists extensi'vely to manage my 3000+ song collection (about 25 lists so far, ranging from 50 to 500 songs or so). I wish Mediasource would: . Allow me to print a playlist 2. Allow me to right click on a song and have an option to see o

  • Where's the "Are you sure you want to change channels"window?

    We used to have Dish and it had one amazing feature that AT&T doesn't have. When I have live tv paused or just rewound back a bit, and then I accidentally hit a number button or the channel up/down button, with AT&T the channel gets changed and I los

  • Problem using BAM 12c with BPEL

    Hi All, i have created a simple BPEL process in 12c. In this process I have defined business indicators ( 1 dimension and one measure). When I deploy the process I can see the data objects <CompositeName> Project and <CompositeName> Activity created,

  • Change the Default Authentication back to secLDAP after SAP kit 3.1 Install

    My client would like to switch the default authentication back to secLDAP after the installation of the SAP kit. What steps do we need to take to make this happen on Unix/Weblogic 9.2? Typically it is a simple chane in the Web.xml, but we are having

  • PDF CONVERSION STILL NOT CLEAR

    HI ANJI, SAIRAM,....... your code is working.. now i am getting pdf file without print form..(its not possible take printout).. suppose i want 3 cases like. 1. i want to see the output form 2. i want to take printout 3. i need a pdf file after execut