Mac won't sleep when shut

Hey, I just noticed today that my computer is no longer going to sleep when I shut the screen, so the Apple light stays on and presumably power is still being used. When I open it up, the screen is right where I left it, already on, not waking up from a black screen. Is this a magnet problem or a setting issue? Is it resolvable?? Thanks!

I'm guessing from the lack of replies that this is a problem best solved with a trek to the Genius Bar....ah well.

Similar Messages

MBP won't sleep when shutting lid

For about a week now, my Macbook Pro won't go to sleep when I close it.--It stays running, and gets hot.
However, using the power button to put it to sleep or choosing sleep from the Apple menu works fine.
Any suggestions?

This issue has been covered extensively in Macfixit.
I would make sure though that you aren't running any applications in the background or have any third party peripherals connected when you close the lid. Make sure also the Energy Saver System Preferences Options has Wake from Sleep for administrative access unchecked. It is found in your Apple menu -> System Preferences.
If you find that you aren't able to stop it from happening, make sure your firmware version gets up to date, and your hardware test tests fine:
http://docs.info.apple.com/article.html?artnum=303880
http://docs.info.apple.com/article.html?artnum=303081
Regardless of the Hardware Test results, call AppleCare:
http://www.apple.com/contact/phone_contacts.html

MacBook Pro won't sleep when shut

I body slammed my computer and cracked the screen. I bought a new, 3rd-party screen and had a friend install it. Now when I close the lid it won't fall asleep, and I must select sleep from the menu. Also, when it is asleep, the heartbeat is dimmer than usual. Tried resetting SMC, no luck.

I'd guess:
a) The magnetic sensor was left out or not aligned properly so it's not getting the 'lid closed' trigger
b) The lamp was replaced out of alignment so isn't directly in position to glow correctly

Macbook Pro won't sleep when lid shuts or hit sleep

Hey Everyone,
So after the latest update my Macbook pro no longer immediately sleeps after shutting the lid. It also won't sleep when 'sleep' is hit in the apple menu. It's actually really annoying as I need it for security.
Does anyone know how to fix this problem?

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Mac Pro won't sleep when I want it to

Hello all
I have a 2006 Mac Pro (1,1) running 10.7.5, 8GB RAM and an 8800GT video card.   It also has a Sonnet USB card and a Sonnet e-SATA card. Lately, the computer has not been going to sleep when I set it to in the Energy Saver preferences panel. If I set it to sleep after a certain amount time (say, 10 minutes), it doesn't. AND if I set it to "Never Sleep" - it does. This is a new one for me, as I have usually seen machines not go to sleep, but never a mac that does sleep when told to "never". It is frustrating, because it seems that whenever I want the computer to stay awake (for a lengthy download or a Time Capsule backup), it won't. And when I want it to sleep because I got called away from the computer, it doesn't.
I've run permission repair and I've looked at the console log. Last night I set it to "never sleep" so I could do an initial backup (wirelessly, so it would take a few hours). When I woke up, the machine was sleeping peacefully. Here are the log entries for when it fell asleep and woke up:
5/17/13 11:25:27 PM kernel: ASP_TCP asp_SetTCPQoS: sock settclassopt got error 57
5/17/13 11:25:27 PM   kernel: ASP_VFS afpfs_DoRecoonect: connect on /Volumes/Time Capsule failed 49
5/17/13 11:25:27 PM   kernel: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and try again
7:49:14 AM kernel: Wake reason: EHCI
There are a lot of those "error 57" and "sleep for 1 seconds and try again" messages. My uneducated guess is that somehow the Time Capsule went to sleep in the middle of the backup, but that wouldn't explain why the Mac went to sleep when it was set not to.
Can anyone please help? Thanks!
Richard

Test after each of the following steps that you haven’t already tried:
Step 1
Take all the steps suggested in this support article.
Step 2
From the menu bar, select
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue
Check all printers for unfinished jobs. Deal with any you find.
Step 3
 ▹ System Preferences ▹ Sharing: uncheck all boxes.
Step 4
Reboot and see whether there's any change.
Step 5
Reset the SMC.
Step 6
Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Mac won't sleep - Reason?

I am trying to figure out why my mac won't sleep.
I have run this command in the teminal (pmset -g assertions) and this is what I get back. If anyone can let me know what the problem is I would appreciate it. I have disconnected everything from the machine such as firewire, usb cables etc. But the computer will not sleep on its own. It does when I initiate it but not by the automatic function in energy saver pref pane.
Thx
Felix
mac-pro:~ felixbird$ pmset -g assertions
7/14/12 7:15:56 AM PDT
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      0
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
Kernel Assertions: 0x0004
* Kernel Assertion ID = 500
   Created At = 12/31/69 4:03:23 PM PST
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff802079e000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 501
   Created At = 12/31/69 4:03:30 PM PST
   Modified At = 7/14/12 7:08:33 AM PDT
   Owner ID = 0xffffff80207c7000
   Level = 255
   Assertions Set = None (4)
* Kernel Assertion ID = 502
   Created At = 7/14/12 7:05:04 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a012c000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 503
   Created At = 7/14/12 7:05:04 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a012f000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 504
   Created At = 7/14/12 7:05:04 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a0129000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 505
   Created At = 7/14/12 7:05:16 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a0145000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 506
   Created At = 7/14/12 7:05:16 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a0148000
   Level = 0
   Assertions Set = None (4)
* Kernel Assertion ID = 507
   Created At = 7/14/12 7:05:16 AM PDT
   Modified At = 12/31/69 4:00:00 PM PST
   Owner ID = 0xffffff81a0132000
   Level = 0
   Assertions Set = None (4)

If it is'nt the card, this may help;
If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following lines:
reset-nvram
press Return on keyboard
set-defaults
press Return
reset-all
press Return
Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
Still did'nt work? Might be time to call AppleCare or see an Apple Genius or a technician.
Cheers!
DALE

MacBook Pro won't sleep when lid is closed and battery lights won't work?

I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed. But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not). Is there a known fix for this problem? I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working. Any help is greatly appreciated!

This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
mechanical fault , contact Apple for service and parts replacement.

Won't sleep when I close the lid - HELP!

A while ago, my iBook G4 1GHz was knocked off of a table. The display was smashed and the whole display assembly was destroyed. I bought a new (used) display assembly and installed it. Worked fine, but when I closed the lid, the iBook woudn't sleep. I checked the placement of the magnet in the top case and I reset the PMU. Still no sleep. So I contacted the company that sold me the display and got a different one. Still won't sleep when I close the lid. I checked all of the energy settings, reset the PMU and even tried to force sleep with a magnet from another broken iBook. Still no sleep when I close the lid. It will sleep when I choose sleep from the Apple menu (OS Tiger) and when it sits for a while with the lid open, but not when I close the lid. Any thoughts?

My original problem has not been solved. The iBook still won't go to sleep when I close the lid. I have checked out any possible software causes, and have ruled them out. I have checked to make sure no keys were being pressed when I closed the lid. I took a magnet from another iBook top case and ran it down the side of the display to try to force sleep. No effect. I don't have any Firewire or USB devices attached, to that's not it. Apple, this board, PBFixit.com, and my local Apple-affiliated repair center have no idea why I am having this problem. Two display assemblies have experienced this problem. The original display had been destroyed in a drop. Could some internal damage, like maybe to the logic board, result in such a problem? It's odd that I am the only person out there who has had this problem. Weird, to be sure.

MacBook Pro won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reboot of the machine solves the problem temporarily, but it always recurs. When I close the lid and listen carefully, I can hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so.
This is not an issue when trying to sleep when running on the battery only. Any advice?

I don't have launch2net installed.
I'm not sure how this will help, but here's the last 5 lines from Console:
11-07-13 5:19:46 PM          Butler[156]          cache: adding applications...
11-07-13 5:19:46 PM          Butler[156]          cache: adding addresses...
11-07-13 5:19:47 PM          Butler[156]          cache: categorizing...
11-07-13 5:19:49 PM          Butler[156]          updated abbreviations cache (enabled)
11-07-13 5:19:58 PM          SIMBL Agent[133]          warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.

Ibook g3 won't sleep when plug in

hi when i plug in my ibook g3 and then put it in sleepmode it just wakes up it won't sleep when plug in help how do i fi this

Hello,
Try resetting the PMU
Best of luck.

My mac won't charge when it is plugged in and.....

my mac won't charge when it is plugged in and also sometimes seems to over heat. can someone help me anyone eles have this problem, i chose to buy a mac over a pc because they are not supposed to have any problrms.

It's still on warranty then. Just head on down to your local Apple Store, with your charger. You could have a bad power supply in the MBP. Or a bad charger. Either way, they'll get fixed for free.
But before you do anything, just try a couple of things that might help, though no guarantee.
http://support.apple.com/kb/HT3964?viewlocale=en_US

I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind. Deleted iExplorer. Now my Mac won't recognize when my iPhone is plugged in. Is iExplorer the problem? How do I fix this?

I was going to use iExplorer to try to copy Notes from iphone 4 to my iMac but changed my mind after downloading iExplorer to my iMac. Deleted iExplorer from my iMac. Now my Mac won't recognize when my iPhone is plugged in. Is iExplorer the problem? How do I fix this?
I am using the Yosemite OS on m

Hi TakesTwo2Tango,
Thanks for using Apple Support Communities. It sounds like you should definitely be seeing a plus sign after tapping Edit, so I would try a couple relatively easy things (closing the Music app, resetting the iPhone):
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

MBP won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reset of the SMC solves the problem temporarily, but it always recurs. Interestingly, the sleep indicator light pulses as if the machine is sleeping, but I can clearly hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so. This is not an issue when trying to sleep when running on the battery only. Any advice?

I would just buy a wall charger for the touch and leave your MBP alone. If you really only wanted to charge it from the MBP, just make sure it doesn't sleep when plugged into the power adapter.

Mac won't sleep after adding Kensington Wireless Mouse

I've added a Kensington PilotMouse Laser Wireless to my system and now it won't sleep, without first switching off the mouse. Kensington has no info on this, is there a workaround?
PowerMac G4 (Dual 867) Mac OS X (10.4.4)

The "sleep" that you describe is not sleep. Your mac has crashed but since it thinks it is sleeping there is nothing in the crash logs.
Sleep on modern computers is not just a hardware shutdown. Because X and XP are server based kernels they are designed to run 24/7 and do what they can to keep it that way. Deep sleep requires an orderly shut down of processes and loading their status into memory so that when it wakes, all is as it was.
There are many things that can prevent sleep. Usb devices are designed to wake a mac on a change of state (doing something). When my mac did what yours did the only fix for it was an erase and install. I tried all the other solutions but the only one that worked was an erase and install.
If you care to try some of the "fixes" then here are some.
Reset the pmu.
http://docs.info.apple.com/article.html?artnum=95037
• Trash all caches (system and user)
• Mac OS X power management is sensitive to malfunctions in USB devices.
Remove USB peripherals, one at a time
• Mac will not sleep if Applications/processes continuously writing to the Console logs.
Launch Console in Applications/Utilities and check both the console.log and system.log logs for blocks of recurring messages written therein that repeat at high frequency.
Note: the console.log file should open by default when you launch Console.
• Quit System Preferences.... Navigate to ....
/Library/Preferences and delete.....com.apple.AutoWake.plist
Enter your Admin password, when prompted.
•If this does not solve the problem, your Energy Saver preferences may be corrupt.
Navigate to /Library/Preferences/SystemConfiguration (folder) and delete.
com.apple.PowerManagement.plist
com.apple.AutoWake.plist
Enter your Admin password, when prompted.
• and finally....
Navigate to ~/Library/Preferences/ and delete......
com.apple.systemuiserver.plist

Mac won't sleep when shut

Similar Messages

Maybe you are looking for